| <?xml version="1.0" ?> | |
| <!DOCTYPE change_log SYSTEM "../../dtd/changes.dtd" > | |
| <change_log title="nginx"> | |
| <changes ver="1.17.4" date="2019-09-24"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| улучшено детектирование некорректного поведения клиентов в HTTP/2. | |
| </para> | |
| <para lang="en"> | |
| better detection of incorrect client behavior in HTTP/2. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| в обработке непрочитанного тела запроса | |
| при возврате ошибок в HTTP/2. | |
| </para> | |
| <para lang="en"> | |
| in handling of not fully read client request body | |
| when returning errors in HTTP/2. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива worker_shutdown_timeout могла не работать | |
| при использовании HTTP/2. | |
| </para> | |
| <para lang="en"> | |
| the "worker_shutdown_timeout" directive might not work | |
| when using HTTP/2. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании HTTP/2 и директивы proxy_request_buffering | |
| в рабочем процессе мог произойти segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| when using HTTP/2 and the "proxy_request_buffering" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| на Windows при использовании SSL | |
| уровень записи в лог ошибки ECONNABORTED был "crit" вместо "error". | |
| </para> | |
| <para lang="en"> | |
| the ECONNABORTED error log level was "crit" instead of "error" | |
| on Windows when using SSL. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx игнорировал лишние данные при использовании chunked transfer encoding. | |
| </para> | |
| <para lang="en"> | |
| nginx ignored extra data when using chunked transfer encoding. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если использовалась директива return и | |
| при чтении тела запроса возникала ошибка, | |
| nginx всегда возвращал ошибку 500. | |
| </para> | |
| <para lang="en"> | |
| nginx always returned the 500 error | |
| if the "return" directive was used | |
| and an error occurred during reading client request body. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в обработке ошибок выделения памяти. | |
| </para> | |
| <para lang="en"> | |
| in memory allocation error handling. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.17.3" date="2019-08-13"> | |
| <change type="security"> | |
| <para lang="ru"> | |
| при использовании HTTP/2 клиент мог вызвать | |
| чрезмерное потребление памяти и ресурсов процессора | |
| (CVE-2019-9511, CVE-2019-9513, CVE-2019-9516). | |
| </para> | |
| <para lang="en"> | |
| when using HTTP/2 a client might cause | |
| excessive memory consumption and CPU usage | |
| (CVE-2019-9511, CVE-2019-9513, CVE-2019-9516). | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании сжатия в логах могли появляться сообщения "zero size buf"; | |
| ошибка появилась в 1.17.2. | |
| </para> | |
| <para lang="en"> | |
| "zero size buf" alerts might appear in logs when using gzipping; | |
| the bug had appeared in 1.17.2. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы resolver в SMTP прокси-сервере | |
| в рабочем процессе мог произойти segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if the "resolver" directive was used in SMTP proxy. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.17.2" date="2019-07-23"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| минимальная поддерживаемая версия zlib—1.2.0.4.<br/> | |
| Спасибо Илье Леошкевичу. | |
| </para> | |
| <para lang="en"> | |
| minimum supported zlib version is 1.2.0.4.<br/> | |
| Thanks to Ilya Leoshkevich. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| метод $r->internal_redirect() встроенного перла | |
| теперь ожидает закодированный URI. | |
| </para> | |
| <para lang="en"> | |
| the $r->internal_redirect() embedded perl method | |
| now expects escaped URIs. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь с помощью метода $r->internal_redirect() встроенного перла | |
| можно перейти в именованный location. | |
| </para> | |
| <para lang="en"> | |
| it is now possible to switch to a named location | |
| using the $r->internal_redirect() embedded perl method. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в обработке ошибок во встроенном перле. | |
| </para> | |
| <para lang="en"> | |
| in error handling in embedded perl. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| на старте или во время переконфигурации мог произойти segmentation fault, | |
| если в конфигурации использовалось значение hash bucket size больше 64 килобайт. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur on start or during reconfiguration | |
| if hash bucket size larger than 64 kilobytes was used in the configuration. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании методов обработки соединений select, poll и /dev/poll | |
| nginx мог нагружать процессор во время небуферизованного проксирования | |
| и при проксировании WebSocket-соединений. | |
| </para> | |
| <para lang="en"> | |
| nginx might hog CPU during unbuffered proxying | |
| and when proxying WebSocket connections | |
| if the select, poll, or /dev/poll methods were used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_xslt_filter_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_xslt_filter_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_ssi_filter_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_ssi_filter_module. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.17.1" date="2019-06-25"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива limit_req_dry_run. | |
| </para> | |
| <para lang="en"> | |
| the "limit_req_dry_run" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| при использовании директивы hash в блоке upstream | |
| пустой ключ хэширования теперь приводит к переключению | |
| на round-robin балансировку.<br/> | |
| Спасибо Niklas Keller. | |
| </para> | |
| <para lang="en"> | |
| when using the "hash" directive inside the "upstream" block | |
| an empty hash key now triggers round-robin balancing.<br/> | |
| Thanks to Niklas Keller. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если использовалось кэширование и директива image_filter, | |
| а ошибки с кодом 415 перенаправлялись с помощью директивы error_page; | |
| ошибка появилась в 1.11.10. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if caching was used along with the "image_filter" directive, | |
| and errors with code 415 were redirected with the "error_page" directive; | |
| the bug had appeared in 1.11.10. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если использовался встроенный перл; | |
| ошибка появилась в 1.7.3. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if embedded perl was used; | |
| the bug had appeared in 1.7.3. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.17.0" date="2019-05-21"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы limit_rate и limit_rate_after поддерживают переменные. | |
| </para> | |
| <para lang="en"> | |
| variables support in the "limit_rate" and "limit_rate_after" directives. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы proxy_upload_rate и proxy_download_rate в модуле stream | |
| поддерживают переменные. | |
| </para> | |
| <para lang="en"> | |
| variables support | |
| in the "proxy_upload_rate" and "proxy_download_rate" directives | |
| in the stream module. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| минимальная поддерживаемая версия OpenSSL—0.9.8. | |
| </para> | |
| <para lang="en"> | |
| minimum supported OpenSSL version is 0.9.8. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь postpone-фильтр собирается всегда. | |
| </para> | |
| <para lang="en"> | |
| now the postpone filter is always built. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива include не работала в блоках if и limit_except. | |
| </para> | |
| <para lang="en"> | |
| the "include" directive did not work inside the "if" and "limit_except" blocks. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в обработке byte ranges. | |
| </para> | |
| <para lang="en"> | |
| in byte ranges processing. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.15.12" date="2019-04-16"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если в директивах ssl_certificate или ssl_certificate_key | |
| использовались переменные | |
| и был включён OCSP stapling. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if variables were used | |
| in the "ssl_certificate" or "ssl_certificate_key" directives | |
| and OCSP stapling was enabled. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.15.11" date="2019-04-09"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве ssl_stapling_file на Windows. | |
| </para> | |
| <para lang="en"> | |
| in the "ssl_stapling_file" directive on Windows. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.15.10" date="2019-03-26"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь при использовании имени хоста в директиве listen | |
| nginx создаёт listen-сокеты для всех адресов, | |
| соответствующих этому имени | |
| (ранее использовался только первый адрес). | |
| </para> | |
| <para lang="en"> | |
| when using a hostname in the "listen" directive | |
| nginx now creates listening sockets | |
| for all addresses the hostname resolves to | |
| (previously, only the first address was used). | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| диапазоны портов в директиве listen. | |
| </para> | |
| <para lang="en"> | |
| port ranges in the "listen" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| возможность загрузки SSL-сертификатов и секретных ключей из переменных. | |
| </para> | |
| <para lang="en"> | |
| loading of SSL certificates and secret keys from variables. | |
| </para> | |
| </change> | |
| <change type="workaround"> | |
| <para lang="ru"> | |
| переменная $ssl_server_name могла быть пустой | |
| при использовании OpenSSL 1.1.1. | |
| </para> | |
| <para lang="en"> | |
| the $ssl_server_name variable might be empty | |
| when using OpenSSL 1.1.1. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx/Windows не собирался с Visual Studio 2015 и новее; | |
| ошибка появилась в 1.15.9. | |
| </para> | |
| <para lang="en"> | |
| nginx/Windows could not be built with Visual Studio 2015 or newer; | |
| the bug had appeared in 1.15.9. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.15.9" date="2019-02-26"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы ssl_certificate и ssl_certificate_key | |
| поддерживают переменные. | |
| </para> | |
| <para lang="en"> | |
| variables support | |
| in the "ssl_certificate" and "ssl_certificate_key" directives. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| метод poll теперь доступен на Windows | |
| при использовании Windows Vista и новее. | |
| </para> | |
| <para lang="en"> | |
| the "poll" method is now available on Windows | |
| when using Windows Vista or newer. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если при использовании метода select на Windows | |
| происходила ошибка при установлении соединения с бэкендом, | |
| nginx ожидал истечения таймаута на установление соединения. | |
| </para> | |
| <para lang="en"> | |
| if the "select" method was used on Windows | |
| and an error occurred while establishing a backend connection, | |
| nginx waited for the connection establishment timeout to expire. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директивы proxy_upload_rate и proxy_download_rate | |
| в модуле stream | |
| работали некорректно при проксировании UDP-пакетов. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_upload_rate" and "proxy_download_rate" directives | |
| in the stream module | |
| worked incorrectly when proxying UDP datagrams. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.15.8" date="2018-12-25"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $upstream_bytes_sent.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| the $upstream_bytes_sent variable.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| новые директивы в скриптах подсветки синтаксиса для vim.<br/> | |
| Спасибо Геннадию Махомеду. | |
| </para> | |
| <para lang="en"> | |
| new directives in vim syntax highlighting scripts.<br/> | |
| Thanks to Gena Makhomed. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве proxy_cache_background_update. | |
| </para> | |
| <para lang="en"> | |
| in the "proxy_cache_background_update" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве geo при использовании unix domain listen-сокетов. | |
| </para> | |
| <para lang="en"> | |
| in the "geo" directive when using unix domain listen sockets. | |
| </para> | |
| </change> | |
| <change type="workaround"> | |
| <para lang="ru"> | |
| при использовании директивы ssl_early_data с OpenSSL | |
| в логах могли появляться сообщения | |
| "ignoring stale global SSL error ... bad length". | |
| </para> | |
| <para lang="en"> | |
| the "ignoring stale global SSL error ... bad length" | |
| alerts might appear in logs | |
| when using the "ssl_early_data" directive with OpenSSL. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в nginx/Windows. | |
| </para> | |
| <para lang="en"> | |
| in nginx/Windows. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_autoindex_module на 32-битных платформах. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_autoindex_module on 32-bit platforms. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.15.7" date="2018-11-27"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива proxy_requests в модуле stream. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_requests" directive in the stream module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр "delay" директивы "limit_req".<br/> | |
| Спасибо Владиславу Шабанову и Петру Щучкину. | |
| </para> | |
| <para lang="en"> | |
| the "delay" parameter of the "limit_req" directive.<br/> | |
| Thanks to Vladislav Shabanov and Peter Shchuchkin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| утечки памяти в случае ошибок при переконфигурации. | |
| </para> | |
| <para lang="en"> | |
| memory leak on errors during reconfiguration. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в переменных $upstream_response_time, $upstream_connect_time и | |
| $upstream_header_time. | |
| </para> | |
| <para lang="en"> | |
| in the $upstream_response_time, $upstream_connect_time, and | |
| $upstream_header_time variables. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если использовался модуль ngx_http_mp4_module на 32-битных платформах. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if the ngx_http_mp4_module was used on 32-bit platforms. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.15.6" date="2018-11-06"> | |
| <change type="security"> | |
| <para lang="ru"> | |
| при использовании HTTP/2 клиент мог вызвать | |
| чрезмерное потреблению памяти (CVE-2018-16843) | |
| и ресурсов процессора (CVE-2018-16844). | |
| </para> | |
| <para lang="en"> | |
| when using HTTP/2 a client might cause | |
| excessive memory consumption (CVE-2018-16843) | |
| and CPU usage (CVE-2018-16844). | |
| </para> | |
| </change> | |
| <change type="security"> | |
| <para lang="ru"> | |
| при обработке специально созданного mp4-файла модулем ngx_http_mp4_module | |
| содержимое памяти рабочего процесса могло быть отправлено клиенту | |
| (CVE-2018-16845). | |
| </para> | |
| <para lang="en"> | |
| processing of a specially crafted mp4 file with the ngx_http_mp4_module | |
| might result in worker process memory disclosure | |
| (CVE-2018-16845). | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы proxy_socket_keepalive, fastcgi_socket_keepalive, | |
| grpc_socket_keepalive, memcached_socket_keepalive, | |
| scgi_socket_keepalive и uwsgi_socket_keepalive. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_socket_keepalive", "fastcgi_socket_keepalive", | |
| "grpc_socket_keepalive", "memcached_socket_keepalive", | |
| "scgi_socket_keepalive", and "uwsgi_socket_keepalive" directives. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если nginx был собран с OpenSSL 1.1.0, а использовался с OpenSSL 1.1.1, | |
| протокол TLS 1.3 всегда был разрешён. | |
| </para> | |
| <para lang="en"> | |
| if nginx was built with OpenSSL 1.1.0 and used with OpenSSL 1.1.1, | |
| the TLS 1.3 protocol was always enabled. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при работе с gRPC-бэкендами могло расходоваться большое количество памяти. | |
| </para> | |
| <para lang="en"> | |
| working with gRPC backends might result in excessive memory consumption. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.15.5" date="2018-10-02"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании OpenSSL 1.1.0h и новее | |
| в рабочем процессе мог произойти segmentation fault; | |
| ошибка появилась в 1.15.4. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| when using OpenSSL 1.1.0h or newer; | |
| the bug had appeared in 1.15.4. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| незначительных потенциальных ошибок. | |
| </para> | |
| <para lang="en"> | |
| of minor potential bugs. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.15.4" date="2018-09-25"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь директиву ssl_early_data можно использовать с OpenSSL. | |
| </para> | |
| <para lang="en"> | |
| now the "ssl_early_data" directive can be used with OpenSSL. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_uwsgi_module.<br/> | |
| Спасибо Chris Caputo. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_uwsgi_module.<br/> | |
| Thanks to Chris Caputo. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| соединения к некоторым gRPC-бэкендам могли не кэшироваться | |
| при использовании директивы keepalive. | |
| </para> | |
| <para lang="en"> | |
| connections with some gRPC backends might not be cached | |
| when using the "keepalive" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы error_page для перенаправления ошибок, | |
| возникающих на ранних этапах обработки запроса, | |
| в частности ошибок с кодом 400, | |
| могла происходить утечка сокетов. | |
| </para> | |
| <para lang="en"> | |
| a socket leak might occur | |
| when using the "error_page" directive | |
| to redirect early request processing errors, | |
| notably errors with code 400. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива return при возврате ошибок не изменяла код ответа, | |
| если запрос был перенаправлен с помощью директивы error_page. | |
| </para> | |
| <para lang="en"> | |
| the "return" directive did not change the response code when returning errors | |
| if the request was redirected by the "error_page" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| стандартные сообщения об ошибках и ответы модуля ngx_http_autoindex_module | |
| содержали атрибут bgcolor, что могло приводить к их некорректному отображению | |
| при использовании пользовательских настроек цветов в браузерах.<br/> | |
| Спасибо Nova DasSarma. | |
| </para> | |
| <para lang="en"> | |
| standard error pages and responses of the ngx_http_autoindex_module module | |
| used the "bgcolor" attribute, and might be displayed incorrectly when using | |
| custom color settings in browsers.<br/> | |
| Thanks to Nova DasSarma. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| уровень логгирования ошибок SSL "no suitable key share" и | |
| "no suitable signature algorithm" | |
| понижен с уровня crit до info. | |
| </para> | |
| <para lang="en"> | |
| the logging level of the "no suitable key share" and | |
| "no suitable signature algorithm" SSL errors | |
| has been lowered from "crit" to "info". | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.15.3" date="2018-08-28"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь TLSv1.3 можно использовать с BoringSSL. | |
| </para> | |
| <para lang="en"> | |
| now TLSv1.3 can be used with BoringSSL. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива ssl_early_data, | |
| сейчас доступна при использовании BoringSSL. | |
| </para> | |
| <para lang="en"> | |
| the "ssl_early_data" directive, | |
| currently available with BoringSSL. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы keepalive_timeout и keepalive_requests | |
| в блоке upstream. | |
| </para> | |
| <para lang="en"> | |
| the "keepalive_timeout" and "keepalive_requests" directives | |
| in the "upstream" block. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_dav_module | |
| при копировании файла поверх существующего файла с помощью метода COPY | |
| не обнулял целевой файл. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_dav_module | |
| did not truncate destination file when copying a file over an existing one | |
| with the COPY method. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_dav_module | |
| при перемещении файла между файловыми системами с помощью метода MOVE | |
| устанавливал нулевые права доступа на результирующий файл | |
| и не сохранял время изменения файла. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_dav_module | |
| used zero access rights on the destination file | |
| and did not preserve file modification time | |
| when moving a file between different file systems with the MOVE method. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_dav_module | |
| при копировании файла с помощью метода COPY | |
| для результирующего файла использовал права доступа по умолчанию. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_dav_module | |
| used default access rights | |
| when copying a file with the COPY method. | |
| </para> | |
| </change> | |
| <change type="workaround"> | |
| <para lang="ru"> | |
| некоторые клиенты могли не работать при использовании HTTP/2; | |
| ошибка появилась в 1.13.5. | |
| </para> | |
| <para lang="en"> | |
| some clients might not work when using HTTP/2; | |
| the bug had appeared in 1.13.5. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался с LibreSSL 2.8.0. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built with LibreSSL 2.8.0. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.15.2" date="2018-07-24"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $ssl_preread_protocol | |
| в модуле ngx_stream_ssl_preread_module. | |
| </para> | |
| <para lang="en"> | |
| the $ssl_preread_protocol variable | |
| in the ngx_stream_ssl_preread_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь при использовании директивы reset_timedout_connection | |
| nginx сбрасывает соединения, закрываемые с кодом 444. | |
| </para> | |
| <para lang="en"> | |
| now when using the "reset_timedout_connection" directive | |
| nginx will reset connections being closed with the 444 code. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| уровень логгирования ошибок SSL "http request", "https proxy request", | |
| "unsupported protocol" и "version too low" | |
| понижен с уровня crit до info. | |
| </para> | |
| <para lang="en"> | |
| a logging level of the "http request", "https proxy request", | |
| "unsupported protocol", and "version too low" SSL errors | |
| has been lowered from "crit" to "info". | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| запросы к DNS-серверу не отправлялись повторно, | |
| если при первой попытке отправки происходила ошибка. | |
| </para> | |
| <para lang="en"> | |
| DNS requests were not resent | |
| if initial sending of a request failed. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| параметр reuseport директивы listen игнорировался, | |
| если количество рабочих процессов было задано после директивы listen. | |
| </para> | |
| <para lang="en"> | |
| the "reuseport" parameter of the "listen" directive was ignored | |
| if the number of worker processes was specified after the "listen" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании OpenSSL 1.1.0 и новее | |
| директиву ssl_prefer_server_ciphers нельзя было выключить | |
| в виртуальном сервере, если она была включена в сервере по умолчанию. | |
| </para> | |
| <para lang="en"> | |
| when using OpenSSL 1.1.0 or newer | |
| it was not possible to switch off "ssl_prefer_server_ciphers" in | |
| a virtual server if it was switched on in the default server. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| повторное использование SSL-сессий к бэкендам | |
| не работало с протоколом TLS 1.3. | |
| </para> | |
| <para lang="en"> | |
| SSL session reuse with upstream servers | |
| did not work with the TLS 1.3 protocol. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.15.1" date="2018-07-03"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива random в блоке upstream. | |
| </para> | |
| <para lang="en"> | |
| the "random" directive inside the "upstream" block. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| улучшена производительность при использовании директив hash и ip_hash | |
| совместно с директивой zone. | |
| </para> | |
| <para lang="en"> | |
| improved performance when using the "hash" and "ip_hash" directives | |
| with the "zone" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр reuseport директивы listen | |
| теперь использует SO_REUSEPORT_LB на FreeBSD 12. | |
| </para> | |
| <para lang="en"> | |
| the "reuseport" parameter of the "listen" directive | |
| now uses SO_REUSEPORT_LB on FreeBSD 12. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| HTTP/2 server push не работал, если SSL терминировался прокси-сервером | |
| перед nginx'ом. | |
| </para> | |
| <para lang="en"> | |
| HTTP/2 server push did not work if SSL was terminated by a proxy server | |
| in front of nginx. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива tcp_nopush всегда использовалась для соединений к бэкендам. | |
| </para> | |
| <para lang="en"> | |
| the "tcp_nopush" directive was always used on backend connections. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при отправке сохранённого на диск тела запроса на gRPC-бэкенд | |
| могли возникать ошибки. | |
| </para> | |
| <para lang="en"> | |
| sending a disk-buffered request body to a gRPC backend | |
| might fail. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.15.0" date="2018-06-05"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| директива "ssl" теперь считается устаревшей; | |
| вместо неё следует использовать параметр ssl директивы listen. | |
| </para> | |
| <para lang="en"> | |
| the "ssl" directive is deprecated; | |
| the "ssl" parameter of the "listen" directive should be used instead. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь при использовании директивы listen с параметром ssl | |
| nginx определяет отсутствие SSL-сертификатов при тестировании конфигурации. | |
| </para> | |
| <para lang="en"> | |
| now nginx detects missing SSL certificates during configuration testing | |
| when using the "ssl" parameter of the "listen" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь модуль stream умеет обрабатывать | |
| несколько входящих UDP-пакетов от клиента в рамках одной сессии. | |
| </para> | |
| <para lang="en"> | |
| now the stream module can handle | |
| multiple incoming UDP datagrams from a client within a single session. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве proxy_cache_valid | |
| можно было указать некорректный код ответа. | |
| </para> | |
| <para lang="en"> | |
| it was possible to specify an incorrect response code | |
| in the "proxy_cache_valid" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался gcc 8.1. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built by gcc 8.1. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| логгирование в syslog останавливалось при изменении локального IP-адреса. | |
| </para> | |
| <para lang="en"> | |
| logging to syslog stopped on local IP address changes. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался компилятором clang, если был установлен CUDA SDK; | |
| ошибка появилась в 1.13.8. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built by clang with CUDA SDK installed; | |
| the bug had appeared in 1.13.8. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании unix domain listen-сокетов на FreeBSD | |
| в процессе обновления исполняемого файла | |
| в логе могли появляться сообщения "getsockopt(TCP_FASTOPEN) ... failed". | |
| </para> | |
| <para lang="en"> | |
| "getsockopt(TCP_FASTOPEN) ... failed" messages might appear in logs | |
| during binary upgrade | |
| when using unix domain listen sockets on FreeBSD. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на Fedora 28 Linux. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on Fedora 28 Linux. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы limit_req | |
| заданная скорость обработки запросов могла не соблюдаться. | |
| </para> | |
| <para lang="en"> | |
| request processing rate might exceed configured rate | |
| when using the "limit_req" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в обработке адресов клиентов при использовании unix domain listen-сокетов | |
| для работы с датаграммами на Linux. | |
| </para> | |
| <para lang="en"> | |
| in handling of client addresses when using unix domain listen sockets | |
| to work with datagrams on Linux. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в обработке ошибок выделения памяти. | |
| </para> | |
| <para lang="en"> | |
| in memory allocation error handling. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.13.12" date="2018-04-10"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при возврате большого ответа | |
| соединения с gRPC-бэкендами могли неожиданно закрываться. | |
| </para> | |
| <para lang="en"> | |
| connections with gRPC backends might be closed unexpectedly | |
| when returning a large response. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.13.11" date="2018-04-03"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр proxy_protocol директивы listen | |
| теперь поддерживает протокол PROXY версии 2. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_protocol" parameter of the "listen" directive | |
| now supports the PROXY protocol version 2. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался с OpenSSL 1.1.1 статически на Linux. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built with OpenSSL 1.1.1 statically on Linux. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в параметрах http_404, http_500 и им подобных | |
| директивы proxy_next_upstream. | |
| </para> | |
| <para lang="en"> | |
| in the "http_404", "http_500", etc. parameters | |
| of the "proxy_next_upstream" directive. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.13.10" date="2018-03-20"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь параметр set в SSI-директиве include | |
| позволяет сохранять в переменную любые ответы; | |
| максимальный размер ответа задаётся директивой subrequest_output_buffer_size. | |
| </para> | |
| <para lang="en"> | |
| the "set" parameter of the "include" SSI directive now allows | |
| writing arbitrary responses to a variable; | |
| the "subrequest_output_buffer_size" directive defines maximum response size. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь nginx использует вызов clock_gettime(CLOCK_MONOTONIC), если он доступен, | |
| что позволяет избежать некорректного срабатывания таймаутов | |
| при изменениях системного времени. | |
| </para> | |
| <para lang="en"> | |
| now nginx uses clock_gettime(CLOCK_MONOTONIC) if available, | |
| to avoid timeouts being incorrectly triggered | |
| on system time changes. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр "escape=none" директивы log_format.<br/> | |
| Спасибо Johannes Baiter и Calin Don. | |
| </para> | |
| <para lang="en"> | |
| the "escape=none" parameter of the "log_format" directive.<br/> | |
| Thanks to Johannes Baiter and Calin Don. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $ssl_preread_alpn_protocols | |
| в модуле ngx_stream_ssl_preread_module. | |
| </para> | |
| <para lang="en"> | |
| the $ssl_preread_alpn_protocols variable | |
| in the ngx_stream_ssl_preread_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_grpc_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_grpc_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в обработке ошибок выделения памяти в директиве geo. | |
| </para> | |
| <para lang="en"> | |
| in memory allocation error handling in the "geo" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании переменных в директиве auth_basic_user_file | |
| в лог мог выводиться символ '\0'.<br/> | |
| Спасибо Вадиму Филимонову. | |
| </para> | |
| <para lang="en"> | |
| when using variables in the "auth_basic_user_file" directive | |
| a null character might appear in logs.<br/> | |
| Thanks to Vadim Filimonov. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.13.9" date="2018-02-20"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка HTTP/2 server push; | |
| директивы http2_push и http2_push_preload. | |
| </para> | |
| <para lang="en"> | |
| HTTP/2 server push support; | |
| the "http2_push" and "http2_push_preload" directives. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании кэша | |
| в логах могли появляться сообщения "header already sent"; | |
| ошибка появилась в 1.9.13. | |
| </para> | |
| <para lang="en"> | |
| "header already sent" alerts might appear in logs | |
| when using cache; | |
| the bug had appeared in 1.9.13. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы ssl_verify_client | |
| в рабочем процессе мог произойти segmentation fault, | |
| если в виртуальном сервере не был указан SSL-сертификат. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if the "ssl_verify_client" directive was used | |
| and no SSL certificate was specified in a virtual server. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_v2_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_v2_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_dav_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_dav_module. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.13.8" date="2017-12-26"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь при использовании параметра transparent директив proxy_bind, | |
| fastcgi_bind, memcached_bind, scgi_bind и uwsgi_bind | |
| nginx автоматически сохраняет capability CAP_NET_RAW в рабочих процессах. | |
| </para> | |
| <para lang="en"> | |
| now nginx automatically preserves the CAP_NET_RAW capability in worker processes | |
| when using the "transparent" parameter of the "proxy_bind", | |
| "fastcgi_bind", "memcached_bind", "scgi_bind", and "uwsgi_bind" directives. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| улучшения в определении размера строки кэша процессора.<br/> | |
| Спасибо Debayan Ghosh. | |
| </para> | |
| <para lang="en"> | |
| improved CPU cache line size detection.<br/> | |
| Thanks to Debayan Ghosh. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| новые директивы в скриптах подсветки синтаксиса для vim.<br/> | |
| Спасибо Геннадию Махомеду. | |
| </para> | |
| <para lang="en"> | |
| new directives in vim syntax highlighting scripts.<br/> | |
| Thanks to Gena Makhomed. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| процедура обновления исполняемого файла не работала, | |
| если после завершения родительского процесса | |
| новым родительским процессом nginx'а становился процесс с PID, отличным от 1. | |
| </para> | |
| <para lang="en"> | |
| binary upgrade refused to work | |
| if nginx was re-parented to a process with PID different from 1 | |
| after its parent process has finished. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_autoindex_module неправильно обрабатывал запросы с телом. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_autoindex_module incorrectly handled requests with bodies. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве proxy_limit_rate при использовании с директивой keepalive. | |
| </para> | |
| <para lang="en"> | |
| in the "proxy_limit_rate" directive when used with the "keepalive" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании "proxy_buffering off" часть ответа могла буферизироваться, | |
| если клиентское соединение использовало SSL.<br/> | |
| Спасибо Patryk Lesiewicz. | |
| </para> | |
| <para lang="en"> | |
| some parts of a response might be buffered when using "proxy_buffering off" | |
| if the client connection used SSL.<br/> | |
| Thanks to Patryk Lesiewicz. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве proxy_cache_background_update. | |
| </para> | |
| <para lang="en"> | |
| in the "proxy_cache_background_update" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| переменную вида "${name}" с именем в фигурных скобках | |
| нельзя было использовать в начале параметра | |
| не заключив весь параметр в кавычки. | |
| </para> | |
| <para lang="en"> | |
| it was not possible to start a parameter | |
| with a variable in the "${name}" form with the name in curly brackets | |
| without enclosing the parameter into single or double quotes. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.13.7" date="2017-11-21"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в переменной $upstream_status. | |
| </para> | |
| <para lang="en"> | |
| in the $upstream_status variable. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если бэкенд возвращал ответ "101 Switching Protocols" на подзапрос. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if a backend returned a "101 Switching Protocols" response to a subrequest. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если при переконфигурации изменялся размер зоны разделяемой памяти | |
| и переконфигурация завершалась неудачно, | |
| то в главном процессе происходил segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault occurred in a master process | |
| if a shared memory zone size was changed during a reconfiguration | |
| and the reconfiguration failed. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_fastcgi_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_fastcgi_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx возвращал ошибку 500, | |
| если в директиве xslt_stylesheet | |
| были заданы параметры без использования переменных. | |
| </para> | |
| <para lang="en"> | |
| nginx returned the 500 error | |
| if parameters without variables were specified | |
| in the "xslt_stylesheet" directive. | |
| </para> | |
| </change> | |
| <change type="workaround"> | |
| <para lang="ru"> | |
| при использовании варианта библиотеки zlib от Intel | |
| в лог писались сообщения "gzip filter failed to use preallocated memory". | |
| </para> | |
| <para lang="en"> | |
| "gzip filter failed to use preallocated memory" alerts appeared in logs | |
| when using a zlib library variant from Intel. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива worker_shutdown_timeout не работала | |
| при использовании почтового прокси-сервера | |
| и при проксировании WebSocket-соединений. | |
| </para> | |
| <para lang="en"> | |
| the "worker_shutdown_timeout" directive did not work | |
| when using mail proxy and when proxying WebSocket connections. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.13.6" date="2017-10-10"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы ssl_preread | |
| в модуле stream не работало переключение на следующий бэкенд. | |
| </para> | |
| <para lang="en"> | |
| switching to the next upstream server in the stream module did not work | |
| when using the "ssl_preread" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_v2_module.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_v2_module.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не поддерживал даты после 2038 года | |
| на 32-битных платформах с 64-битным time_t. | |
| </para> | |
| <para lang="en"> | |
| nginx did not support dates after the year 2038 | |
| on 32-bit platforms with 64-bit time_t. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в обработке дат до 1970 года и после 10000 года. | |
| </para> | |
| <para lang="en"> | |
| in handling of dates prior to the year 1970 and after the year 10000. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле stream таймауты ожидания UDP-пакетов от бэкендов | |
| не логгировались или логгировались на уровне info вместо error. | |
| </para> | |
| <para lang="en"> | |
| in the stream module timeouts waiting for UDP datagrams from upstream servers | |
| were not logged or logged at the "info" level instead of "error". | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании HTTP/2 nginx мог вернуть ошибку 400, | |
| не указав в логе причину. | |
| </para> | |
| <para lang="en"> | |
| when using HTTP/2 nginx might return the 400 response | |
| without logging the reason. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в обработке повреждённых файлов кэша. | |
| </para> | |
| <para lang="en"> | |
| in processing of corrupted cache files. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при кэшировании ошибок, перехваченных error_page, | |
| не учитывались заголовки управления кэшированием. | |
| </para> | |
| <para lang="en"> | |
| cache control headers were ignored | |
| when caching errors intercepted by error_page. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании HTTP/2 тело запроса могло быть повреждено. | |
| </para> | |
| <para lang="en"> | |
| when using HTTP/2 client request body might be corrupted. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в обработке адресов клиентов при использовании unix domain сокетов. | |
| </para> | |
| <para lang="en"> | |
| in handling of client addresses when using unix domain sockets. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы "hash ... consistent" в блоке upstream | |
| nginx нагружал процессор, если использовались большие веса | |
| и все или почти все бэкенды были недоступны. | |
| </para> | |
| <para lang="en"> | |
| nginx hogged CPU | |
| when using the "hash ... consistent" directive in the upstream block | |
| if large weights were used and all or most of the servers were unavailable. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.13.5" date="2017-09-05"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $ssl_client_escaped_cert. | |
| </para> | |
| <para lang="en"> | |
| the $ssl_client_escaped_cert variable. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива ssl_session_ticket_key и параметр include директивы geo | |
| не работали на Windows. | |
| </para> | |
| <para lang="en"> | |
| the "ssl_session_ticket_key" directive and | |
| the "include" parameter of the "geo" directive did not work on Windows. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| на 32-битных платформах | |
| при запросе более 4 гигабайт с помощью нескольких диапазонов | |
| возвращалась некорректная длина ответа. | |
| </para> | |
| <para lang="en"> | |
| incorrect response length was returned | |
| on 32-bit platforms when requesting more than 4 gigabytes | |
| with multiple ranges. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива "expires modified" и | |
| обработка строки If-Range заголовка запроса | |
| не учитывали время последнего изменения ответа, | |
| если использовалось проксирование без кэширования. | |
| </para> | |
| <para lang="en"> | |
| the "expires modified" directive and | |
| processing of the "If-Range" request header line | |
| did not use the response last modification time | |
| if proxying without caching was used. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.13.4" date="2017-08-08"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_mirror_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_mirror_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| клиентские соединения могли сбрасываться при тестировании конфигурации, | |
| если использовался параметр reuseport директивы listen на Linux. | |
| </para> | |
| <para lang="en"> | |
| client connections might be dropped during configuration testing | |
| when using the "reuseport" parameter of the "listen" directive on Linux. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| тело запроса могло быть недоступно в подзапросах, | |
| если оно было сохранено в файл и использовалось проксирование. | |
| </para> | |
| <para lang="en"> | |
| request body might not be available in subrequests | |
| if it was saved to a file and proxying was used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| очистка кэша по max_size не работала на Windows. | |
| </para> | |
| <para lang="en"> | |
| cleaning cache based on the "max_size" parameter did not work on Windows. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| любое выделение разделяемой памяти на Windows требовало 4096 байт памяти. | |
| </para> | |
| <para lang="en"> | |
| any shared memory allocation required 4096 bytes on Windows. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы zone в блоке upstream на Windows | |
| рабочий процесс мог завершаться аварийно. | |
| </para> | |
| <para lang="en"> | |
| nginx worker might be terminated abnormally | |
| when using the "zone" directive inside the "upstream" block on Windows. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.13.3" date="2017-07-11"> | |
| <change type="security"> | |
| <para lang="ru"> | |
| специально созданный запрос мог вызвать целочисленное переполнение | |
| в range-фильтре и последующую некорректную обработку запрошенных диапазонов, | |
| что потенциально могло привести к утечке конфиденциальной информации | |
| (CVE-2017-7529). | |
| </para> | |
| <para lang="en"> | |
| a specially crafted request might result in an integer overflow | |
| and incorrect processing of ranges in the range filter, | |
| potentially resulting in sensitive information leak | |
| (CVE-2017-7529). | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.13.2" date="2017-06-27"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь при запросе диапазона, начинающегося с 0, из пустого файла | |
| nginx возвращает ответ 200 вместо 416. | |
| </para> | |
| <para lang="en"> | |
| nginx now returns 200 instead of 416 | |
| when a range starting with 0 is requested from an empty file. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива add_trailer.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| the "add_trailer" directive.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался под Cygwin и NetBSD; | |
| ошибка появилась в 1.13.0. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on Cygwin and NetBSD; | |
| the bug had appeared in 1.13.0. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался под MSYS2 / MinGW 64-bit.<br/> | |
| Спасибо Orgad Shaneh. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built under MSYS2 / MinGW 64-bit.<br/> | |
| Thanks to Orgad Shaneh. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании SSI с большим количеством подзапросов | |
| и proxy_pass с переменными | |
| в рабочем процессе мог произойти segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| when using SSI with many includes | |
| and proxy_pass with variables. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_v2_module.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_v2_module.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.13.1" date="2017-05-30"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь в качестве параметра директивы set_real_ip_from | |
| можно указывать имя хоста. | |
| </para> | |
| <para lang="en"> | |
| now a hostname can be used | |
| as the "set_real_ip_from" directive parameter. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| улучшения в скриптах подсветки синтаксиса для vim. | |
| </para> | |
| <para lang="en"> | |
| vim syntax highlighting scripts improvements. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива worker_cpu_affinity теперь работает на DragonFly BSD.<br/> | |
| Спасибо Sepherosa Ziehau. | |
| </para> | |
| <para lang="en"> | |
| the "worker_cpu_affinity" directive now works on DragonFly BSD.<br/> | |
| Thanks to Sepherosa Ziehau. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| SSL renegotiation в соединениях к бэкендам | |
| не работал при использовании OpenSSL до 1.1.0. | |
| </para> | |
| <para lang="en"> | |
| SSL renegotiation on backend connections | |
| did not work when using OpenSSL before 1.1.0. | |
| </para> | |
| </change> | |
| <change type="workaround"> | |
| <para lang="ru"> | |
| nginx не собирался с Oracle Developer Studio 12.5. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built with Oracle Developer Studio 12.5. | |
| </para> | |
| </change> | |
| <change type="workaround"> | |
| <para lang="ru"> | |
| теперь cache manager пропускает заблокированные записи | |
| при очистке кэша по max_size. | |
| </para> | |
| <para lang="en"> | |
| now cache manager ignores long locked cache entries | |
| when cleaning cache based on the "max_size" parameter. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| клиентские SSL-соединения сразу закрывались, если использовался | |
| отложенный accept и параметр proxy_protocol директивы listen. | |
| </para> | |
| <para lang="en"> | |
| client SSL connections were immediately closed if deferred accept | |
| and the "proxy_protocol" parameter of the "listen" directive were used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве proxy_cache_background_update. | |
| </para> | |
| <para lang="en"> | |
| in the "proxy_cache_background_update" directive. | |
| </para> | |
| </change> | |
| <change type="workaround"> | |
| <para lang="ru"> | |
| теперь директива tcp_nodelay | |
| устанавливает опцию TCP_NODELAY перед SSL handshake. | |
| </para> | |
| <para lang="en"> | |
| now the "tcp_nodelay" directive | |
| sets the TCP_NODELAY option before an SSL handshake. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.13.0" date="2017-04-25"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь SSL renegotiation допускается в соединениях к бэкендам. | |
| </para> | |
| <para lang="en"> | |
| SSL renegotiation is now allowed on backend connections. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметры rcvbuf и sndbuf директив listen | |
| в почтовом прокси-сервере и модуле stream. | |
| </para> | |
| <para lang="en"> | |
| the "rcvbuf" and "sndbuf" parameters of the "listen" directives | |
| of the mail proxy and stream modules. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы return и error_page теперь могут использоваться для возврата | |
| перенаправлений с кодом 308.<br/> | |
| Спасибо Simon Leblanc. | |
| </para> | |
| <para lang="en"> | |
| the "return" and "error_page" directives can now be used to return 308 | |
| redirections.<br/> | |
| Thanks to Simon Leblanc. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр TLSv1.3 в директиве ssl_protocols. | |
| </para> | |
| <para lang="en"> | |
| the "TLSv1.3" parameter of the "ssl_protocols" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| при логгировании сигналов теперь указывается PID отправившего сигнал процесса. | |
| </para> | |
| <para lang="en"> | |
| when logging signals nginx now logs PID of the process which sent the signal. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в обработке ошибок выделения памяти. | |
| </para> | |
| <para lang="en"> | |
| in memory allocation error handling. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если сервер в модуле stream слушал на wildcard-адресе, | |
| исходящий адрес ответного UDP-пакета | |
| мог отличаться от адреса назначения исходного пакета. | |
| </para> | |
| <para lang="en"> | |
| if a server in the stream module listened on a wildcard address, | |
| the source address of a response UDP datagram could differ | |
| from the original datagram destination address. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.11.13" date="2017-04-04"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр http_429 в директивах proxy_next_upstream, fastcgi_next_upstream, | |
| scgi_next_upstream и uwsgi_next_upstream.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| the "http_429" parameter of the "proxy_next_upstream", "fastcgi_next_upstream", | |
| "scgi_next_upstream", and "uwsgi_next_upstream" directives.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в обработке ошибок выделения памяти. | |
| </para> | |
| <para lang="en"> | |
| in memory allocation error handling. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директив sendfile и timer_resolution на Linux | |
| запросы могли зависать. | |
| </para> | |
| <para lang="en"> | |
| requests might hang | |
| when using the "sendfile" and "timer_resolution" directives on Linux. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании с подзапросами директив sendfile и aio_write | |
| запросы могли зависать. | |
| </para> | |
| <para lang="en"> | |
| requests might hang | |
| when using the "sendfile" and "aio_write" directives with subrequests. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_v2_module.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_v2_module.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании HTTP/2 в рабочем процессе мог произойти segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process when using HTTP/2. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| запросы могли зависать | |
| при использовании с подзапросами директив limit_rate, sendfile_max_chunk, | |
| limit_req или метода $r->sleep() встроенного перла. | |
| </para> | |
| <para lang="en"> | |
| requests might hang | |
| when using the "limit_rate", "sendfile_max_chunk", "limit_req" directives, | |
| or the $r->sleep() embedded perl method with subrequests. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_slice_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_slice_module. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.11.12" date="2017-03-24"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx мог нагружать процессор; | |
| ошибка появилась в 1.11.11. | |
| </para> | |
| <para lang="en"> | |
| nginx might hog CPU; | |
| the bug had appeared in 1.11.11. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.11.11" date="2017-03-21"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива worker_shutdown_timeout. | |
| </para> | |
| <para lang="en"> | |
| the "worker_shutdown_timeout" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| улучшения в скриптах подсветки синтаксиса для vim.<br/> | |
| Спасибо Wei-Ko Kao. | |
| </para> | |
| <para lang="en"> | |
| vim syntax highlighting scripts improvements.<br/> | |
| Thanks to Wei-Ko Kao. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при попытке установить переменную $limit_rate в пустую строку | |
| в рабочем процессе мог произойти segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if the $limit_rate variable was set to an empty string. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директивы proxy_cache_background_update, fastcgi_cache_background_update, | |
| scgi_cache_background_update и uwsgi_cache_background_update | |
| могли работать некорректно, если использовалась директива if. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_cache_background_update", "fastcgi_cache_background_update", | |
| "scgi_cache_background_update", and "uwsgi_cache_background_update" directives | |
| might work incorrectly if the "if" directive was used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если количество large_client_header_buffers в виртуальном сервере | |
| отличалось от такового в сервере по умолчанию. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if number of large_client_header_buffers in a virtual server | |
| was different from the one in the default server. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в почтовом прокси-сервере. | |
| </para> | |
| <para lang="en"> | |
| in the mail proxy server. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.11.10" date="2017-02-14"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| формат заголовка кэша был изменен, | |
| ранее закэшированные ответы будут загружены заново. | |
| </para> | |
| <para lang="en"> | |
| cache header format has been changed, | |
| previously cached responses will be invalidated. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка расширений stale-while-revalidate и stale-if-error | |
| в строке "Cache-Control" в заголовке ответа бэкенда. | |
| </para> | |
| <para lang="en"> | |
| support of "stale-while-revalidate" and "stale-if-error" extensions | |
| in the "Cache-Control" backend response header line. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы proxy_cache_background_update, fastcgi_cache_background_update, | |
| scgi_cache_background_update и uwsgi_cache_background_update. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_cache_background_update", "fastcgi_cache_background_update", | |
| "scgi_cache_background_update", and "uwsgi_cache_background_update" directives. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь nginx может кэшировать ответы | |
| со строкой Vary заголовка длиной до 128 символов | |
| (вместо 42 символов в предыдущих версиях). | |
| </para> | |
| <para lang="en"> | |
| nginx is now able to cache responses | |
| with the "Vary" header line up to 128 characters long | |
| (instead of 42 characters in previous versions). | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр build директивы server_tokens.<br/> | |
| Спасибо Tom Thorogood. | |
| </para> | |
| <para lang="en"> | |
| the "build" parameter of the "server_tokens" directive.<br/> | |
| Thanks to Tom Thorogood. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при обработке запросов со строкой "Expect: 100-continue" в заголовке запроса | |
| в логах могли появляться сообщения "[crit] SSL_write() failed". | |
| </para> | |
| <para lang="en"> | |
| "[crit] SSL_write() failed" messages might appear in logs | |
| when handling requests with the "Expect: 100-continue" request header line. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_slice_module не работал в именованных location'ах. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_slice_module did not work in named locations. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании AIO после перенаправления запроса с помощью X-Accel-Redirect | |
| в рабочем процессе мог произойти segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| when using AIO after an "X-Accel-Redirect" redirection. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| уменьшено потребление памяти для долгоживущих запросов, использующих сжатие. | |
| </para> | |
| <para lang="en"> | |
| reduced memory consumption for long-lived requests using gzipping. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.11.9" date="2017-01-24"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании модуля stream nginx мог нагружать процессор; | |
| ошибка появилась в 1.11.5. | |
| </para> | |
| <para lang="en"> | |
| nginx might hog CPU when using the stream module; | |
| the bug had appeared in 1.11.5. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| метод аутентификации EXTERNAL в почтовом прокси-сервере | |
| можно было использовать, даже если он не был разрешён в конфигурации. | |
| </para> | |
| <para lang="en"> | |
| EXTERNAL authentication mechanism in mail proxy | |
| was accepted even if it was not enabled in the configuration. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы ssl_verify_client модуля stream | |
| в рабочем процессе мог произойти segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if the "ssl_verify_client" directive of the stream module was used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива ssl_verify_client модуля stream могла не работать. | |
| </para> | |
| <para lang="en"> | |
| the "ssl_verify_client" directive of the stream module might not work. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при исчерпании рабочим процессом свободных соединений | |
| keepalive-соединения могли закрываться излишне агрессивно.<br/> | |
| Спасибо Joel Cunningham. | |
| </para> | |
| <para lang="en"> | |
| closing keepalive connections due to no free worker connections | |
| might be too aggressive.<br/> | |
| Thanks to Joel Cunningham. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы sendfile на FreeBSD и macOS | |
| мог возвращаться некорректный ответ; | |
| ошибка появилась в 1.7.8. | |
| </para> | |
| <para lang="en"> | |
| an incorrect response might be returned | |
| when using the "sendfile" directive on FreeBSD and macOS; | |
| the bug had appeared in 1.7.8. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы aio_write | |
| ответ мог сохраняться в кэш не полностью. | |
| </para> | |
| <para lang="en"> | |
| a truncated response might be stored in cache | |
| when using the "aio_write" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы aio_write | |
| могла происходить утечка сокетов. | |
| </para> | |
| <para lang="en"> | |
| a socket leak might occur | |
| when using the "aio_write" directive. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.11.8" date="2016-12-27"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива absolute_redirect. | |
| </para> | |
| <para lang="en"> | |
| the "absolute_redirect" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр escape директивы log_format. | |
| </para> | |
| <para lang="en"> | |
| the "escape" parameter of the "log_format" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| проверка клиентских SSL-сертификатов в модуле stream. | |
| </para> | |
| <para lang="en"> | |
| client SSL certificates verification in the stream module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива ssl_session_ticket_key поддерживает | |
| шифрование TLS session tickets с помощью AES256 | |
| при использовании с 80-байтными ключами. | |
| </para> | |
| <para lang="en"> | |
| the "ssl_session_ticket_key" directive supports | |
| AES256 encryption of TLS session tickets | |
| when used with 80-byte keys. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка vim-commentary в скриптах для vim.<br/> | |
| Спасибо Armin Grodon. | |
| </para> | |
| <para lang="en"> | |
| vim-commentary support in vim scripts.<br/> | |
| Thanks to Armin Grodon. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| рекурсия при получении значений переменных не ограничивалась. | |
| </para> | |
| <para lang="en"> | |
| recursion when evaluating variables was not limited. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_stream_ssl_preread_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_stream_ssl_preread_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если сервер, описанный в блоке upstream в модуле stream, | |
| был признан неработающим, то после истечения fail_timeout он | |
| признавался работающим только после завершения тестового соединения; | |
| теперь достаточно, чтобы соединение было успешно установлено. | |
| </para> | |
| <para lang="en"> | |
| if a server in an upstream in the stream module failed, | |
| it was considered alive only when a test connection sent | |
| to it after fail_timeout was closed; | |
| now a successfully established connection is enough. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx/Windows не собирался с 64-битным Visual Studio. | |
| </para> | |
| <para lang="en"> | |
| nginx/Windows could not be built with 64-bit Visual Studio. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx/Windows не собирался с OpenSSL 1.1.0. | |
| </para> | |
| <para lang="en"> | |
| nginx/Windows could not be built with OpenSSL 1.1.0. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.11.7" date="2016-12-13"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| переменная $ssl_client_verify теперь | |
| в случае ошибки проверки клиентского сертификата | |
| содержит строку с описанием ошибки, | |
| например, "FAILED:certificate has expired". | |
| </para> | |
| <para lang="en"> | |
| now in case of a client certificate verification error | |
| the $ssl_client_verify variable contains a string with the failure reason, | |
| for example, "FAILED:certificate has expired". | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменные $ssl_ciphers, $ssl_curves, | |
| $ssl_client_v_start, $ssl_client_v_end и $ssl_client_v_remain. | |
| </para> | |
| <para lang="en"> | |
| the $ssl_ciphers, $ssl_curves, | |
| $ssl_client_v_start, $ssl_client_v_end, and $ssl_client_v_remain variables. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр volatile директивы map. | |
| </para> | |
| <para lang="en"> | |
| the "volatile" parameter of the "map" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при сборке динамических модулей | |
| не учитывались заданные для модуля зависимости. | |
| </para> | |
| <para lang="en"> | |
| dependencies specified for a module | |
| were ignored while building dynamic modules. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании HTTP/2 и директив limit_req или auth_request | |
| тело запроса могло быть повреждено; | |
| ошибка появилась в 1.11.0. | |
| </para> | |
| <para lang="en"> | |
| when using HTTP/2 and the "limit_req" or "auth_request" directives | |
| client request body might be corrupted; | |
| the bug had appeared in 1.11.0. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании HTTP/2 в рабочем процессе мог произойти segmentation fault; | |
| ошибка появилась в 1.11.3. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process when using HTTP/2; | |
| the bug had appeared in 1.11.3. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_mp4_module.<br/> | |
| Спасибо Congcong Hu. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_mp4_module.<br/> | |
| Thanks to Congcong Hu. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_perl_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_perl_module. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.11.6" date="2016-11-15"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| формат переменных $ssl_client_s_dn и $ssl_client_i_dn | |
| изменён на соответствующий RFC 2253 (RFC 4514); | |
| значения в старом формате доступны через переменные | |
| $ssl_client_s_dn_legacy и $ssl_client_i_dn_legacy. | |
| </para> | |
| <para lang="en"> | |
| format of the $ssl_client_s_dn and $ssl_client_i_dn variables | |
| has been changed to follow RFC 2253 (RFC 4514); | |
| values in the old format are available in | |
| the $ssl_client_s_dn_legacy and $ssl_client_i_dn_legacy variables. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| при сохранении временных файлов в каталоге кэша | |
| они теперь располагаются не в отдельном подкаталоге для временных файлов, | |
| а в том же подкаталоге, что и соответствующие файлы в кэше. | |
| </para> | |
| <para lang="en"> | |
| when storing temporary files in a cache directory | |
| they will be stored in the same subdirectories as corresponding cache files | |
| instead of a separate subdirectory for temporary files. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка метода аутентификации EXTERNAL | |
| в почтовом прокси-сервере.<br/> | |
| Спасибо Robert Norris. | |
| </para> | |
| <para lang="en"> | |
| EXTERNAL authentication mechanism support | |
| in mail proxy.<br/> | |
| Thanks to Robert Norris. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка WebP в модуле ngx_http_image_filter_module. | |
| </para> | |
| <para lang="en"> | |
| WebP support in the ngx_http_image_filter_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива proxy_method поддерживает переменные.<br/> | |
| Спасибо Дмитрию Лазуркину. | |
| </para> | |
| <para lang="en"> | |
| variables support in the "proxy_method" directive.<br/> | |
| Thanks to Dmitry Lazurkin. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива http2_max_requests в модуле ngx_http_v2_module. | |
| </para> | |
| <para lang="en"> | |
| the "http2_max_requests" directive in the ngx_http_v2_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы proxy_cache_max_range_offset, fastcgi_cache_max_range_offset, | |
| scgi_cache_max_range_offset и uwsgi_cache_max_range_offset. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_cache_max_range_offset", "fastcgi_cache_max_range_offset", | |
| "scgi_cache_max_range_offset", and "uwsgi_cache_max_range_offset" directives. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| плавное завершение старых рабочих процессов могло занимать бесконечное время | |
| при использовании HTTP/2. | |
| </para> | |
| <para lang="en"> | |
| graceful shutdown of old worker processes might require infinite time | |
| when using HTTP/2. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_mp4_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_mp4_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при проксировании WebSocket-соединений и включённом кэшировании | |
| в логах могли появляться сообщения "ignore long locked inactive cache entry". | |
| </para> | |
| <para lang="en"> | |
| "ignore long locked inactive cache entry" alerts might appear in logs | |
| when proxying WebSocket connections with caching enabled. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если во время SSL handshake с бэкендом происходил таймаут, | |
| nginx ничего не писал в лог | |
| и возвращал ответ с кодом 502 вместо 504. | |
| </para> | |
| <para lang="en"> | |
| nginx did not write anything to log | |
| and returned a response with code 502 instead of 504 | |
| when a timeout occurred during an SSL handshake to a backend. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.11.5" date="2016-10-11"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| параметр configure --with-ipv6 упразднён, | |
| поддержка IPv6 теперь собирается автоматически. | |
| </para> | |
| <para lang="en"> | |
| the --with-ipv6 configure option was removed, | |
| now IPv6 support is configured automatically. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь, если в блоке upstream не оказалось доступных серверов, | |
| nginx не сбрасывает статистику ошибок всех серверов, как делал ранее, | |
| а ожидает истечения fail_timeout. | |
| </para> | |
| <para lang="en"> | |
| now if there are no available servers in an upstream, | |
| nginx will not reset number of failures of all servers as it previously did, | |
| but will wait for fail_timeout to expire. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_stream_ssl_preread_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_stream_ssl_preread_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива server в блоке upstream поддерживает параметр max_conns. | |
| </para> | |
| <para lang="en"> | |
| the "server" directive in the "upstream" context supports | |
| the "max_conns" parameter. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр configure --with-compat. | |
| </para> | |
| <para lang="en"> | |
| the --with-compat configure option. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметры manager_files, manager_threshold и manager_sleep | |
| директив proxy_cache_path, fastcgi_cache_path, scgi_cache_path и | |
| uwsgi_cache_path. | |
| </para> | |
| <para lang="en"> | |
| "manager_files", "manager_threshold", and "manager_sleep" parameters | |
| of the "proxy_cache_path", "fastcgi_cache_path", "scgi_cache_path", and | |
| "uwsgi_cache_path" directives. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при сборке perl-модуля не использовались флаги, | |
| заданные с помощью параметра configure --with-ld-opt. | |
| </para> | |
| <para lang="en"> | |
| flags passed by the --with-ld-opt configure option | |
| were not used while building perl module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве add_after_body при использовании совместно с директивой sub_filter. | |
| </para> | |
| <para lang="en"> | |
| in the "add_after_body" directive when used with the "sub_filter" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в переменной $realip_remote_addr. | |
| </para> | |
| <para lang="en"> | |
| in the $realip_remote_addr variable. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директивы dav_access, proxy_store_access, fastcgi_store_access, | |
| scgi_store_access и uwsgi_store_access | |
| игнорировали права, заданные для пользователя. | |
| </para> | |
| <para lang="en"> | |
| the "dav_access", "proxy_store_access", "fastcgi_store_access", | |
| "scgi_store_access", and "uwsgi_store_access" directives | |
| ignored permissions specified for user. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| unix domain listen-сокеты могли не наследоваться | |
| при обновлении исполняемого файла на Linux. | |
| </para> | |
| <para lang="en"> | |
| unix domain listen sockets might not be inherited | |
| during binary upgrade on Linux. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx возвращал ошибку 400 на запросы | |
| с символом "-" в HTTP-методе. | |
| </para> | |
| <para lang="en"> | |
| nginx returned the 400 response on requests | |
| with the "-" character in the HTTP method. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.11.4" date="2016-09-13"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $upstream_bytes_received. | |
| </para> | |
| <para lang="en"> | |
| the $upstream_bytes_received variable. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменные $bytes_received, $session_time, $protocol, $status, | |
| $upstream_addr, $upstream_bytes_sent, $upstream_bytes_received, | |
| $upstream_connect_time, $upstream_first_byte_time | |
| и $upstream_session_time в модуле stream. | |
| </para> | |
| <para lang="en"> | |
| the $bytes_received, $session_time, $protocol, $status, | |
| $upstream_addr, $upstream_bytes_sent, $upstream_bytes_received, | |
| $upstream_connect_time, $upstream_first_byte_time, | |
| and $upstream_session_time variables in the stream module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_stream_log_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_stream_log_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр proxy_protocol в директиве listen, | |
| переменные $proxy_protocol_addr и $proxy_protocol_port | |
| в модуле stream. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_protocol" parameter of the "listen" directive, | |
| the $proxy_protocol_addr and $proxy_protocol_port variables | |
| in the stream module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_stream_realip_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_stream_realip_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался с модулем stream и модулем ngx_http_ssl_module, | |
| но без модуля ngx_stream_ssl_module; | |
| ошибка появилась в 1.11.3. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built with the stream module and the ngx_http_ssl_module, | |
| but without ngx_stream_ssl_module; | |
| the bug had appeared in 1.11.3. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| опция сокета IP_BIND_ADDRESS_NO_PORT не использовалась; | |
| ошибка появилась в 1.11.2. | |
| </para> | |
| <para lang="en"> | |
| the IP_BIND_ADDRESS_NO_PORT socket option was not used; | |
| the bug had appeared in 1.11.2. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в параметре ranges директивы geo. | |
| </para> | |
| <para lang="en"> | |
| in the "ranges" parameter of the "geo" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директив "aio threads" и sendfile | |
| мог возвращаться некорректный ответ; ошибка появилась в 1.9.13. | |
| </para> | |
| <para lang="en"> | |
| an incorrect response might be returned | |
| when using the "aio threads" and "sendfile" directives; | |
| the bug had appeared in 1.9.13. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.11.3" date="2016-07-26"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь accept_mutex по умолчанию выключен. | |
| </para> | |
| <para lang="en"> | |
| now the "accept_mutex" directive is turned off by default. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь nginx использует EPOLLEXCLUSIVE на Linux. | |
| </para> | |
| <para lang="en"> | |
| now nginx uses EPOLLEXCLUSIVE on Linux. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_stream_geo_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_stream_geo_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_stream_geoip_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_stream_geoip_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_stream_split_clients_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_stream_split_clients_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы proxy_pass и proxy_ssl_name в модуле stream | |
| поддерживают переменные. | |
| </para> | |
| <para lang="en"> | |
| variables support | |
| in the "proxy_pass" and "proxy_ssl_name" directives in the stream module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| утечки сокетов при использовании HTTP/2. | |
| </para> | |
| <para lang="en"> | |
| socket leak when using HTTP/2. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в configure.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| in configure tests.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.11.2" date="2016-07-05"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь nginx всегда использует внутренние реализации MD5 и SHA1; | |
| параметры configure --with-md5 и --with-sha1 упразднены. | |
| </para> | |
| <para lang="en"> | |
| now nginx always uses internal MD5 and SHA1 implementations; | |
| the --with-md5 and --with-sha1 configure options were canceled. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка переменных в модуле stream. | |
| </para> | |
| <para lang="en"> | |
| variables support in the stream module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_stream_map_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_stream_map_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_stream_return_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_stream_return_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| в директивах proxy_bind, fastcgi_bind, memcached_bind, scgi_bind и uwsgi_bind | |
| теперь можно указывать порт. | |
| </para> | |
| <para lang="en"> | |
| a port can be specified in the "proxy_bind", "fastcgi_bind", | |
| "memcached_bind", "scgi_bind", and "uwsgi_bind" directives. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь nginx использует опцию сокета IP_BIND_ADDRESS_NO_PORT, если она доступна. | |
| </para> | |
| <para lang="en"> | |
| now nginx uses the IP_BIND_ADDRESS_NO_PORT socket option when available. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании HTTP/2 и директивы proxy_request_buffering | |
| в рабочем процессе мог произойти segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| when using HTTP/2 and the "proxy_request_buffering" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании HTTP/2 | |
| к запросам, передаваемым на бэкенд, | |
| всегда добавлялась строка заголовка "Content-Length", | |
| даже если у запроса не было тела. | |
| </para> | |
| <para lang="en"> | |
| the "Content-Length" request header line | |
| was always added to requests passed to backends, | |
| including requests without body, | |
| when using HTTP/2. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании HTTP/2 | |
| в логах могли появляться сообщения "http request count is zero". | |
| </para> | |
| <para lang="en"> | |
| "http request count is zero" alerts might appear in logs | |
| when using HTTP/2. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы sub_filter | |
| могло буферизироваться больше данных, чем это необходимо; | |
| проблема появилась в 1.9.4. | |
| </para> | |
| <para lang="en"> | |
| unnecessary buffering might occur | |
| when using the "sub_filter" directive; | |
| the issue had appeared in 1.9.4. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.11.1" date="2016-05-31"> | |
| <change type="security"> | |
| <para lang="ru"> | |
| при записи тела специально созданного запроса во временный файл | |
| в рабочем процессе мог происходить segmentation fault | |
| (CVE-2016-4450); | |
| ошибка появилась в 1.3.9. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| while writing a specially crafted request body to a temporary file | |
| (CVE-2016-4450); | |
| the bug had appeared in 1.3.9. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.11.0" date="2016-05-24"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр transparent директив proxy_bind, fastcgi_bind, | |
| memcached_bind, scgi_bind и uwsgi_bind. | |
| </para> | |
| <para lang="en"> | |
| the "transparent" parameter of the "proxy_bind", "fastcgi_bind", | |
| "memcached_bind", "scgi_bind", and "uwsgi_bind" directives. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $request_id. | |
| </para> | |
| <para lang="en"> | |
| the $request_id variable. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива map поддерживает комбинации нескольких переменных | |
| в качестве результирующих значений. | |
| </para> | |
| <para lang="en"> | |
| the "map" directive supports combinations of multiple variables | |
| as resulting values. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь при использовании метода epoll | |
| nginx проверяет, поддерживает ли ядро события EPOLLRDHUP, | |
| и соответственно оптимизирует обработку соединений. | |
| </para> | |
| <para lang="en"> | |
| now nginx checks if EPOLLRDHUP events are supported by kernel, | |
| and optimizes connection handling accordingly | |
| if the "epoll" method is used. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы ssl_certificate и ssl_certificate_key | |
| теперь можно указывать несколько раз | |
| для загрузки сертификатов разных типов (например, RSA и ECDSA). | |
| </para> | |
| <para lang="en"> | |
| the "ssl_certificate" and "ssl_certificate_key" directives | |
| can be specified multiple times | |
| to load certificates of different types (for example, RSA and ECDSA). | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| при использовании OpenSSL 1.0.2 и новее | |
| с помощью директивы ssl_ecdh_curve теперь можно задать список кривых; | |
| по умолчанию используется встроенный в OpenSSL список кривых. | |
| </para> | |
| <para lang="en"> | |
| the "ssl_ecdh_curve" directive now allows specifying a list of curves | |
| when using OpenSSL 1.0.2 or newer; | |
| by default a list built into OpenSSL is used. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| для использования DHE-шифров теперь надо явно задавать файл параметров | |
| с помощью директивы ssl_dhparam. | |
| </para> | |
| <para lang="en"> | |
| to use DHE ciphers it is now required to specify parameters | |
| using the "ssl_dhparam" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $proxy_protocol_port. | |
| </para> | |
| <para lang="en"> | |
| the $proxy_protocol_port variable. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $realip_remote_port в модуле ngx_http_realip_module. | |
| </para> | |
| <para lang="en"> | |
| the $realip_remote_port variable in the ngx_http_realip_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_realip_module теперь позволяет устанавливать | |
| не только адрес, но и порт клиента. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_realip_module is now able to set the client port | |
| in addition to the address. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| при попытке запросить виртуальный сервер, | |
| отличающийся от согласованного в процессе SSL handshake, | |
| теперь возвращается ответ "421 Misdirected Request"; | |
| это улучшает совместимость с некоторыми HTTP/2-клиентами | |
| в случае использования клиентских сертификатов. | |
| </para> | |
| <para lang="en"> | |
| the "421 Misdirected Request" response now used | |
| when rejecting requests to a virtual server | |
| different from one negotiated during an SSL handshake; | |
| this improves interoperability with some HTTP/2 clients | |
| when using client certificates. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| HTTP/2-клиенты теперь могут сразу присылать тело запроса; | |
| директива http2_body_preread_size позволяет указать размер буфера, который | |
| будет использоваться до того, как nginx начнёт читать тело. | |
| </para> | |
| <para lang="en"> | |
| HTTP/2 clients can now start sending request body immediately; | |
| the "http2_body_preread_size" directive controls size of the buffer used | |
| before nginx will start reading client request body. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы proxy_cache_bypass | |
| не обновлялись закэшированные ошибочные ответы. | |
| </para> | |
| <para lang="en"> | |
| cached error responses were not updated | |
| when using the "proxy_cache_bypass" directive. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.9.15" date="2016-04-19"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании HHVM в качестве FastCGI-сервера | |
| могли возникать ошибки "recv() failed". | |
| </para> | |
| <para lang="en"> | |
| "recv() failed" errors might occur | |
| when using HHVM as a FastCGI server. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании HTTP/2 и директив limit_req или auth_request | |
| при чтении тела запроса мог произойти таймаут | |
| или ошибка "client violated flow control"; | |
| ошибка появилась в 1.9.14. | |
| </para> | |
| <para lang="en"> | |
| when using HTTP/2 and the "limit_req" or "auth_request" directives | |
| a timeout or a "client violated flow control" error | |
| might occur while reading client request body; | |
| the bug had appeared in 1.9.14. | |
| </para> | |
| </change> | |
| <change type="workaround"> | |
| <para lang="ru"> | |
| при использовании HTTP/2 ответ мог не показываться некоторыми браузерами, | |
| если тело запроса было прочитано не целиком; | |
| ошибка появилась в 1.9.14. | |
| </para> | |
| <para lang="en"> | |
| a response might not be shown by some browsers | |
| if HTTP/2 was used and client request body was not fully read; | |
| the bug had appeared in 1.9.14. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы "aio threads" соединения могли зависать.<br/> | |
| Спасибо Mindaugas Rasiukevicius. | |
| </para> | |
| <para lang="en"> | |
| connections might hang when using the "aio threads" directive.<br/> | |
| Thanks to Mindaugas Rasiukevicius. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.9.14" date="2016-04-05"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| совместимость с OpenSSL 1.1.0. | |
| </para> | |
| <para lang="en"> | |
| OpenSSL 1.1.0 compatibility. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы proxy_request_buffering, fastcgi_request_buffering, | |
| scgi_request_buffering и uwsgi_request_buffering | |
| теперь работают при использовании HTTP/2. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_request_buffering", "fastcgi_request_buffering", | |
| "scgi_request_buffering", and "uwsgi_request_buffering" directives | |
| now work with HTTP/2. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании HTTP/2 | |
| в логах могли появляться сообщения "zero size buf in output". | |
| </para> | |
| <para lang="en"> | |
| "zero size buf in output" alerts might appear in logs | |
| when using HTTP/2. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании HTTP/2 | |
| директива client_max_body_size могла работать неверно. | |
| </para> | |
| <para lang="en"> | |
| the "client_max_body_size" directive might work incorrectly | |
| when using HTTP/2. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| незначительных ошибок логгирования. | |
| </para> | |
| <para lang="en"> | |
| of minor bugs in logging. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.9.13" date="2016-03-29"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| неидемпотентные запросы (POST, LOCK, PATCH) | |
| теперь по умолчанию не передаются на другой сервер, | |
| если запрос уже был отправлен на бэкенд; | |
| параметр non_idempotent директивы proxy_next_upstream | |
| явно разрешает повторять такие запросы. | |
| </para> | |
| <para lang="en"> | |
| non-idempotent requests (POST, LOCK, PATCH) | |
| are no longer passed to the next server by default | |
| if a request has been sent to a backend; | |
| the "non_idempotent" parameter of the "proxy_next_upstream" directive | |
| explicitly allows retrying such requests. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_perl_module теперь можно собрать динамически. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_perl_module can be built dynamically. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка UDP в модуле stream. | |
| </para> | |
| <para lang="en"> | |
| UDP support in the stream module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива aio_write. | |
| </para> | |
| <para lang="en"> | |
| the "aio_write" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь cache manager следит за количеством элементов в кэше | |
| и старается не допускать переполнений зоны разделяемой памяти. | |
| </para> | |
| <para lang="en"> | |
| now cache manager monitors number of elements in caches | |
| and tries to avoid cache keys zone overflows. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директив sendfile и aio с подзапросами | |
| в логах могли появляться сообщения "task already active" и "second aio post". | |
| </para> | |
| <para lang="en"> | |
| "task already active" and "second aio post" alerts might appear in logs | |
| when using the "sendfile" and "aio" directives with subrequests. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании кэширования | |
| в логах могли появляться сообщения "zero size buf in output", | |
| если клиент закрывал соединение преждевременно. | |
| </para> | |
| <para lang="en"> | |
| "zero size buf in output" alerts might appear in logs | |
| if caching was used | |
| and a client closed a connection prematurely. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании кэширования | |
| соединения с клиентами могли закрываться без необходимости.<br/> | |
| Спасибо Justin Li. | |
| </para> | |
| <para lang="en"> | |
| connections with clients might be closed needlessly | |
| if caching was used.<br/> | |
| Thanks to Justin Li. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx мог нагружать процессор | |
| при использовании директивы sendfile на Linux и Solaris, | |
| если отправляемый файл был изменён в процессе отправки. | |
| </para> | |
| <para lang="en"> | |
| nginx might hog CPU | |
| if the "sendfile" directive was used on Linux or Solaris | |
| and a file being sent was changed during sending. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директив sendfile и "aio threads" | |
| соединения могли зависать. | |
| </para> | |
| <para lang="en"> | |
| connections might hang | |
| when using the "sendfile" and "aio threads" directives. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директивах proxy_pass, fastcgi_pass, scgi_pass и uwsgi_pass | |
| при использовании переменных.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| in the "proxy_pass", "fastcgi_pass", "scgi_pass", and "uwsgi_pass" directives | |
| when using variables.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_sub_filter_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_sub_filter_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если в закэшированном соединении к бэкенду происходила ошибка, | |
| запрос передавался на другой сервер | |
| без учёта директивы proxy_next_upstream. | |
| </para> | |
| <para lang="en"> | |
| if an error occurred in a cached backend connection, | |
| the request was passed to the next server | |
| regardless of the proxy_next_upstream directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки "CreateFile() failed" при создании временных файлов на Windows. | |
| </para> | |
| <para lang="en"> | |
| "CreateFile() failed" errors when creating temporary files on Windows. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.9.12" date="2016-02-24"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| кодирование Хаффмана заголовков ответов в HTTP/2.<br/> | |
| Спасибо Владу Краснову. | |
| </para> | |
| <para lang="en"> | |
| Huffman encoding of response headers in HTTP/2.<br/> | |
| Thanks to Vlad Krasnov. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива worker_cpu_affinity теперь поддерживает более 64 процессоров. | |
| </para> | |
| <para lang="en"> | |
| the "worker_cpu_affinity" directive now supports more than 64 CPUs. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| совместимость со сторонними модулями на C++; | |
| ошибка появилась в 1.9.11.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| compatibility with 3rd party C++ modules; | |
| the bug had appeared in 1.9.11.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался статически с OpenSSL на Linux; | |
| ошибка появилась в 1.9.11. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built statically with OpenSSL on Linux; | |
| the bug had appeared in 1.9.11. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива "add_header ... always" с пустым значением | |
| не удаляла из заголовков ошибочных ответов | |
| строки Last-Modified и ETag. | |
| </para> | |
| <para lang="en"> | |
| the "add_header ... always" directive with an empty value | |
| did not delete "Last-Modified" and "ETag" header lines | |
| from error responses. | |
| </para> | |
| </change> | |
| <change type="workaround"> | |
| <para lang="ru"> | |
| при использовании OpenSSL 1.0.2f в логах могли появляться | |
| сообщения "called a function you should not call" и | |
| "shutdown while in init". | |
| </para> | |
| <para lang="en"> | |
| "called a function you should not call" | |
| and "shutdown while in init" messages might appear in logs | |
| when using OpenSSL 1.0.2f. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибочные заголовки могли логгироваться некорректно. | |
| </para> | |
| <para lang="en"> | |
| invalid headers might be logged incorrectly. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| утечки сокетов при использовании HTTP/2. | |
| </para> | |
| <para lang="en"> | |
| socket leak when using HTTP/2. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_v2_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_v2_module. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.9.11" date="2016-02-09"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь resolver поддерживает TCP. | |
| </para> | |
| <para lang="en"> | |
| TCP support in resolver. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| динамические модули. | |
| </para> | |
| <para lang="en"> | |
| dynamic modules. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании HTTP/2 | |
| переменная $request_length не учитывала размер заголовков запроса. | |
| </para> | |
| <para lang="en"> | |
| the $request_length variable did not include size of request headers | |
| when using HTTP/2. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_v2_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_v2_module. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.9.10" date="2016-01-26"> | |
| <change type="security"> | |
| <para lang="ru"> | |
| при использовании директивы resolver | |
| во время обработки ответов DNS-сервера | |
| могло происходить разыменование некорректного адреса, | |
| что позволяло атакующему, | |
| имеющему возможность подделывать UDP-пакеты от DNS-сервера, | |
| вызвать segmentation fault в рабочем процессе (CVE-2016-0742). | |
| </para> | |
| <para lang="en"> | |
| invalid pointer dereference might occur | |
| during DNS server response processing | |
| if the "resolver" directive was used, | |
| allowing an attacker who is able to forge UDP packets from the DNS server | |
| to cause segmentation fault in a worker process (CVE-2016-0742). | |
| </para> | |
| </change> | |
| <change type="security"> | |
| <para lang="ru"> | |
| при использовании директивы resolver | |
| во время обработки CNAME-записей | |
| могло произойти обращение к ранее освобождённой памяти, | |
| что позволяло атакующему, | |
| имеющему возможность инициировать преобразование произвольных имён в адреса, | |
| вызвать segmentation fault в рабочем процессе, | |
| а также потенциально могло иметь другие последствия (CVE-2016-0746). | |
| </para> | |
| <para lang="en"> | |
| use-after-free condition might occur | |
| during CNAME response processing | |
| if the "resolver" directive was used, | |
| allowing an attacker who is able to trigger name resolution | |
| to cause segmentation fault in a worker process, | |
| or might have potential other impact (CVE-2016-0746). | |
| </para> | |
| </change> | |
| <change type="security"> | |
| <para lang="ru"> | |
| при использовании директивы resolver | |
| во время обработки CNAME-записей | |
| не во всех случаях проверялось ограничение | |
| на максимальное количество записей в цепочке, | |
| что позволяло атакующему, | |
| имеющему возможность инициировать преобразование произвольных имён в адреса, | |
| вызвать чрезмерное потребление ресурсов рабочими процессами (CVE-2016-0747). | |
| </para> | |
| <para lang="en"> | |
| CNAME resolution was insufficiently limited | |
| if the "resolver" directive was used, | |
| allowing an attacker who is able to trigger arbitrary name resolution | |
| to cause excessive resource consumption in worker processes (CVE-2016-0747). | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр auto директивы worker_cpu_affinity. | |
| </para> | |
| <para lang="en"> | |
| the "auto" parameter of the "worker_cpu_affinity" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| параметр proxy_protocol директивы listen не работал | |
| с IPv6 listen-сокетами. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_protocol" parameter of the "listen" directive did not work | |
| with IPv6 listen sockets. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы keepalive | |
| соединения к бэкендам могли кэшироваться некорректно. | |
| </para> | |
| <para lang="en"> | |
| connections to upstream servers might be cached incorrectly | |
| when using the "keepalive" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| после перенаправления запроса с помощью X-Accel-Redirect | |
| при проксировании использовался HTTP-метод оригинального запроса. | |
| </para> | |
| <para lang="en"> | |
| proxying used the HTTP method of the original request | |
| after an "X-Accel-Redirect" redirection. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.9.9" date="2015-12-09"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| проксирование в unix domain сокеты не работало при использовании переменных; | |
| ошибка появилась в 1.9.8. | |
| </para> | |
| <para lang="en"> | |
| proxying to unix domain sockets did not work when using variables; | |
| the bug had appeared in 1.9.8. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.9.8" date="2015-12-08"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка pwritev(). | |
| </para> | |
| <para lang="en"> | |
| pwritev() support. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива include в блоке upstream. | |
| </para> | |
| <para lang="en"> | |
| the "include" directive inside the "upstream" block. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_slice_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_slice_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании LibreSSL | |
| в рабочем процессе мог произойти segmentation fault; | |
| ошибка появилась в 1.9.6. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| when using LibreSSL; | |
| the bug had appeared in 1.9.6. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx мог не собираться на OS X. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on OS X in some cases. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.9.7" date="2015-11-17"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр nohostname логгирования в syslog. | |
| </para> | |
| <para lang="en"> | |
| the "nohostname" parameter of logging to syslog. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива proxy_cache_convert_head. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_cache_convert_head" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $realip_remote_addr в модуле ngx_http_realip_module. | |
| </para> | |
| <para lang="en"> | |
| the $realip_remote_addr variable in the ngx_http_realip_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива expires могла не срабатывать при использовании переменных. | |
| </para> | |
| <para lang="en"> | |
| the "expires" directive might not work when using variables. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании HTTP/2 | |
| в рабочем процессе мог произойти segmentation fault; | |
| ошибка появилась в 1.9.6. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| when using HTTP/2; | |
| the bug had appeared in 1.9.6. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если nginx был собран с модулем ngx_http_v2_module, | |
| протокол HTTP/2 мог быть использован клиентом, | |
| даже если не был указан параметр http2 директивы listen. | |
| </para> | |
| <para lang="en"> | |
| if nginx was built with the ngx_http_v2_module | |
| it was possible to use the HTTP/2 protocol | |
| even if the "http2" parameter of the "listen" directive was not specified. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_v2_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_v2_module. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.9.6" date="2015-10-27"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании HTTP/2 | |
| в рабочем процессе мог произойти segmentation fault.<br/> | |
| Спасибо Piotr Sikora и Denis Andzakovic. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| when using HTTP/2.<br/> | |
| Thanks to Piotr Sikora and Denis Andzakovic. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании HTTP/2 переменная $server_protocol была пустой. | |
| </para> | |
| <para lang="en"> | |
| the $server_protocol variable was empty when using HTTP/2. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| SSL-соединения к бэкендам в модуле stream | |
| могли неожиданно завершаться по таймауту. | |
| </para> | |
| <para lang="en"> | |
| backend SSL connections in the stream module | |
| might be timed out unexpectedly. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании различных настроек ssl_session_cache | |
| в разных виртуальных серверах | |
| в рабочем процессе мог произойти segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if different ssl_session_cache settings were used | |
| in different virtual servers. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx/Windows не собирался с MinGW gcc; | |
| ошибка появилась в 1.9.4.<br/> | |
| Спасибо Kouhei Sutou. | |
| </para> | |
| <para lang="en"> | |
| nginx/Windows could not be built with MinGW gcc; | |
| the bug had appeared in 1.9.4.<br/> | |
| Thanks to Kouhei Sutou. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы timer_resolution на Windows время не обновлялось. | |
| </para> | |
| <para lang="en"> | |
| time was not updated when the timer_resolution directive was used on Windows. | |
| </para> | |
| </change> | |
| <change> | |
| <para lang="ru"> | |
| Незначительные исправления и улучшения.<br/> | |
| Спасибо Markus Linnala, Kurtis Nusbaum и Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| Miscellaneous minor fixes and improvements.<br/> | |
| Thanks to Markus Linnala, Kurtis Nusbaum and Piotr Sikora. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.9.5" date="2015-09-22"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_v2_module (заменяет модуль ngx_http_spdy_module).<br/> | |
| Спасибо Dropbox и Automattic за спонсирование разработки. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_v2_module (replaces ngx_http_spdy_module).<br/> | |
| Thanks to Dropbox and Automattic for sponsoring this work. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь по умолчанию директива output_buffers использует два буфера. | |
| </para> | |
| <para lang="en"> | |
| now the "output_buffers" directive uses two buffers by default. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь nginx ограничивает максимальную вложенность подзапросов, | |
| а не количество одновременных подзапросов. | |
| </para> | |
| <para lang="en"> | |
| now nginx limits subrequests recursion, | |
| not simultaneous subrequests. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь при возврате ответов из кэша nginx проверяет ключ полностью.<br/> | |
| Спасибо Геннадию Махомеду и Сергею Брестеру. | |
| </para> | |
| <para lang="en"> | |
| now nginx checks the whole cache key when returning a response from cache.<br/> | |
| Thanks to Gena Makhomed and Sergey Brester. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании кэша | |
| в логах могли появляться сообщения "header already sent"; | |
| ошибка появилась в 1.7.5. | |
| </para> | |
| <para lang="en"> | |
| "header already sent" alerts might appear in logs | |
| when using cache; | |
| the bug had appeared in 1.7.5. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании CephFS и директивы timer_resolution на Linux | |
| в логах могли появляться сообщения | |
| "writev() failed (4: Interrupted system call)". | |
| </para> | |
| <para lang="en"> | |
| "writev() failed (4: Interrupted system call)" | |
| errors might appear in logs | |
| when using CephFS and the "timer_resolution" directive on Linux. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в обработке ошибок конфигурации.<br/> | |
| Спасибо Markus Linnala. | |
| </para> | |
| <para lang="en"> | |
| in invalid configurations handling.<br/> | |
| Thanks to Markus Linnala. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы sub_filter на уровне http | |
| в рабочем процессе происходил segmentation fault; | |
| ошибка появилась в 1.9.4. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault occurred in a worker process | |
| if the "sub_filter" directive was used at http level; | |
| the bug had appeared in 1.9.4. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.9.4" date="2015-08-18"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| директивы proxy_downstream_buffer и proxy_upstream_buffer в модуле stream | |
| заменены директивой proxy_buffer_size. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_downstream_buffer" and "proxy_upstream_buffer" directives | |
| of the stream module are replaced with the "proxy_buffer_size" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива tcp_nodelay в модуле stream. | |
| </para> | |
| <para lang="en"> | |
| the "tcp_nodelay" directive in the stream module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь можно указать несколько директив sub_filter одновременно. | |
| </para> | |
| <para lang="en"> | |
| multiple "sub_filter" directives can be used simultaneously. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива sub_filter поддерживает переменные в строке поиска. | |
| </para> | |
| <para lang="en"> | |
| variables support in the search string of the "sub_filter" directive. | |
| </para> | |
| </change> | |
| <change type="workaround"> | |
| <para lang="ru"> | |
| тестирование конфигурации могло не работать под Linux OpenVZ.<br/> | |
| Спасибо Геннадию Махомеду. | |
| </para> | |
| <para lang="en"> | |
| configuration testing might fail under Linux OpenVZ.<br/> | |
| Thanks to Gena Makhomed. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| после переконфигурации старые рабочие процессы могли сильно нагружать процессор | |
| при больших значениях worker_connections. | |
| </para> | |
| <para lang="en"> | |
| old worker processes might hog CPU after reconfiguration | |
| with a large number of worker_connections. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при совместном использовании директив try_files и alias | |
| внутри location'а, заданного регулярным выражением, | |
| в рабочем процессе мог произойти segmentation fault; | |
| ошибка появилась в 1.7.1. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if the "try_files" and "alias" directives were used | |
| inside a location given by a regular expression; | |
| the bug had appeared in 1.7.1. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива try_files внутри вложенного location'а, заданного регулярным | |
| выражением, работала неправильно, если во внешнем location'е использовалась | |
| директива alias. | |
| </para> | |
| <para lang="en"> | |
| the "try_files" directive inside a nested location | |
| given by a regular expression worked incorrectly | |
| if the "alias" directive was used in the outer location. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в обработке ошибок при построении хэш-таблиц. | |
| </para> | |
| <para lang="en"> | |
| in hash table initialization error handling. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался с Visual Studio 2015. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built with Visual Studio 2015. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.9.3" date="2015-07-14"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| дублирующиеся блоки http, mail и stream теперь запрещены. | |
| </para> | |
| <para lang="en"> | |
| duplicate "http", "mail", and "stream" blocks are now disallowed. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| ограничение количества соединений в модуле stream. | |
| </para> | |
| <para lang="en"> | |
| connection limiting in the stream module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| ограничение скорости в модуле stream. | |
| </para> | |
| <para lang="en"> | |
| data rate limiting in the stream module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива zone в блоке upstream не работала на Windows. | |
| </para> | |
| <para lang="en"> | |
| the "zone" directive inside the "upstream" block did not work on Windows. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| совместимость с LibreSSL в модуле stream.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| compatibility with LibreSSL in the stream module.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в параметре --builddir в configure.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| in the "--builddir" configure parameter.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива ssl_stapling_file не работала; | |
| ошибка появилась в 1.9.2.<br/> | |
| Спасибо Faidon Liambotis и Brandon Black. | |
| </para> | |
| <para lang="en"> | |
| the "ssl_stapling_file" directive did not work; | |
| the bug had appeared in 1.9.2.<br/> | |
| Thanks to Faidon Liambotis and Brandon Black. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы ssl_stapling | |
| в рабочем процессе мог произойти segmentation fault; | |
| ошибка появилась в 1.9.2.<br/> | |
| Спасибо Matthew Baldwin. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if the "ssl_stapling" directive was used; | |
| the bug had appeared in 1.9.2.<br/> | |
| Thanks to Matthew Baldwin. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.9.2" date="2015-06-16"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр backlog директивы listen | |
| в почтовом прокси-сервере и модуле stream. | |
| </para> | |
| <para lang="en"> | |
| the "backlog" parameter of the "listen" directives | |
| of the mail proxy and stream modules. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы allow и deny в модуле stream. | |
| </para> | |
| <para lang="en"> | |
| the "allow" and "deny" directives in the stream module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива proxy_bind в модуле stream. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_bind" directive in the stream module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива proxy_protocol в модуле stream. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_protocol" directive in the stream module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| ключ -T. | |
| </para> | |
| <para lang="en"> | |
| the -T switch. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр REQUEST_SCHEME добавлен в стандартные конфигурационные файлы | |
| fastcgi.conf, fastcgi_params, scgi_params и uwsgi_params. | |
| </para> | |
| <para lang="en"> | |
| the REQUEST_SCHEME parameter added to the fastcgi.conf, fastcgi_params, | |
| scgi_params, and uwsgi_params standard configuration files. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| параметр reuseport директивы listen в модуле stream | |
| не работал. | |
| </para> | |
| <para lang="en"> | |
| the "reuseport" parameter of the "listen" directive of the stream module | |
| did not work. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| OCSP stapling в некоторых случаях мог вернуть устаревший OCSP-ответ. | |
| </para> | |
| <para lang="en"> | |
| OCSP stapling might return an expired OCSP response in some cases. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.9.1" date="2015-05-26"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь протокол SSLv3 по умолчанию запрещён. | |
| </para> | |
| <para lang="en"> | |
| now SSLv3 protocol is disabled by default. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| некоторые давно устаревшие директивы больше не поддерживаются. | |
| </para> | |
| <para lang="en"> | |
| some long deprecated directives are not supported anymore. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр reuseport директивы listen.<br/> | |
| Спасибо Yingqi Lu из Intel и Sepherosa Ziehau. | |
| </para> | |
| <para lang="en"> | |
| the "reuseport" parameter of the "listen" directive.<br/> | |
| Thanks to Yingqi Lu at Intel and Sepherosa Ziehau. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $upstream_connect_time. | |
| </para> | |
| <para lang="en"> | |
| the $upstream_connect_time variable. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве hash на big-endian платформах. | |
| </para> | |
| <para lang="en"> | |
| in the "hash" directive on big-endian platforms. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx мог не запускаться на некоторых старых версиях Linux; | |
| ошибка появилась в 1.7.11. | |
| </para> | |
| <para lang="en"> | |
| nginx might fail to start on some old Linux variants; | |
| the bug had appeared in 1.7.11. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в парсинге IP-адресов.<br/> | |
| Спасибо Сергею Половко. | |
| </para> | |
| <para lang="en"> | |
| in IP address parsing.<br/> | |
| Thanks to Sergey Polovko. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.9.0" date="2015-04-28"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| устаревшие методы обработки соединений aio и rtsig больше не поддерживаются. | |
| </para> | |
| <para lang="en"> | |
| obsolete aio and rtsig event methods have been removed. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива zone в блоке upstream. | |
| </para> | |
| <para lang="en"> | |
| the "zone" directive inside the "upstream" block. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль stream. | |
| </para> | |
| <para lang="en"> | |
| the stream module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка byte ranges для ответов модуля ngx_http_memcached_module.<br/> | |
| Спасибо Martin Mlynář. | |
| </para> | |
| <para lang="en"> | |
| byte ranges support in the ngx_http_memcached_module.<br/> | |
| Thanks to Martin Mlynář. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| разделяемую память теперь можно использовать на версиях Windows | |
| с рандомизацией адресного пространства.<br/> | |
| Спасибо Сергею Брестеру. | |
| </para> | |
| <para lang="en"> | |
| shared memory can now be used on Windows versions | |
| with address space layout randomization.<br/> | |
| Thanks to Sergey Brester. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директиву error_log теперь можно использовать | |
| на уровнях mail и server в почтовом прокси-сервере. | |
| </para> | |
| <para lang="en"> | |
| the "error_log" directive can now be used | |
| on mail and server levels in mail proxy. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| параметр proxy_protocol директивы listen не работал, | |
| если не был указан в первой директиве listen для данного listen-сокета. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_protocol" parameter of the "listen" directive did not work | |
| if not specified in the first "listen" directive for a listen socket. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.7.12" date="2015-04-07"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь директива tcp_nodelay работает для SSL-соединений с бэкендами. | |
| </para> | |
| <para lang="en"> | |
| now the "tcp_nodelay" directive works with backend SSL connections. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь потоки могут использоваться для чтения заголовков файлов в кэше. | |
| </para> | |
| <para lang="en"> | |
| now thread pools can be used to read cache file headers. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве proxy_request_buffering. | |
| </para> | |
| <para lang="en"> | |
| in the "proxy_request_buffering" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании потоков на Linux | |
| в рабочем процессе мог произойти segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| when using thread pools on Linux. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в обработке ошибок при использовании директивы ssl_stapling.<br/> | |
| Спасибо Filipe da Silva. | |
| </para> | |
| <para lang="en"> | |
| in error handling when using the "ssl_stapling" directive.<br/> | |
| Thanks to Filipe da Silva. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_spdy_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_spdy_module. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.7.11" date="2015-03-24"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| параметр sendfile директивы aio более не нужен; | |
| теперь nginx автоматически использует AIO для подгрузки данных для sendfile, | |
| если одновременно используются директивы aio и sendfile. | |
| </para> | |
| <para lang="en"> | |
| the "sendfile" parameter of the "aio" directive is deprecated; | |
| now nginx automatically uses AIO to pre-load data for sendfile | |
| if both "aio" and "sendfile" directives are used. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| экспериментальная поддержка потоков. | |
| </para> | |
| <para lang="en"> | |
| experimental thread pools support. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы proxy_request_buffering, fastcgi_request_buffering, | |
| scgi_request_buffering и uwsgi_request_buffering. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_request_buffering", "fastcgi_request_buffering", | |
| "scgi_request_buffering", and "uwsgi_request_buffering" directives. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| экспериментальное API для обработки тела запроса. | |
| </para> | |
| <para lang="en"> | |
| request body filters experimental API. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| проверка клиентских SSL-сертификатов в почтовом прокси-сервере.<br/> | |
| Спасибо Sven Peter, Franck Levionnois и Filipe Da Silva. | |
| </para> | |
| <para lang="en"> | |
| client SSL certificates support in mail proxy.<br/> | |
| Thanks to Sven Peter, Franck Levionnois, and Filipe Da Silva. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| уменьшение времени запуска | |
| при использовании директивы "hash ... consistent" в блоке upstream.<br/> | |
| Спасибо Wai Keen Woon. | |
| </para> | |
| <para lang="en"> | |
| startup speedup | |
| when using the "hash ... consistent" directive in the upstream block.<br/> | |
| Thanks to Wai Keen Woon. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| отладочное логгирование в кольцевой буфер в памяти. | |
| </para> | |
| <para lang="en"> | |
| debug logging into a cyclic memory buffer. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в обработке хэш-таблиц.<br/> | |
| Спасибо Chris West. | |
| </para> | |
| <para lang="en"> | |
| in hash table handling.<br/> | |
| Thanks to Chris West. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве proxy_cache_revalidate. | |
| </para> | |
| <para lang="en"> | |
| in the "proxy_cache_revalidate" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| SSL-соединения могли зависать, если использовался отложенный accept | |
| или параметр proxy_protocol директивы listen.<br/> | |
| Спасибо James Hamlin. | |
| </para> | |
| <para lang="en"> | |
| SSL connections might hang if deferred accept | |
| or the "proxy_protocol" parameter of the "listen" directive were used.<br/> | |
| Thanks to James Hamlin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| переменная $upstream_response_time могла содержать неверное значение | |
| при использовании директивы image_filter. | |
| </para> | |
| <para lang="en"> | |
| the $upstream_response_time variable might contain a wrong value | |
| if the "image_filter" directive was used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в обработке целочисленных переполнений.<br/> | |
| Спасибо Régis Leroy. | |
| </para> | |
| <para lang="en"> | |
| in integer overflow handling.<br/> | |
| Thanks to Régis Leroy. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании LibreSSL было невозможно включить поддержку SSLv3. | |
| </para> | |
| <para lang="en"> | |
| it was not possible to enable SSLv3 with LibreSSL. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании LibreSSL в логах появлялись сообщения | |
| "ignoring stale global SSL error ... called a function you should not call". | |
| </para> | |
| <para lang="en"> | |
| the "ignoring stale global SSL error ... called a function you should not call" | |
| alerts appeared in logs when using LibreSSL. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| сертификаты, указанные в директивах ssl_client_certificate и | |
| ssl_trusted_certificate, использовались | |
| для автоматического построения цепочек сертификатов. | |
| </para> | |
| <para lang="en"> | |
| certificates specified by the "ssl_client_certificate" and | |
| "ssl_trusted_certificate" directives were inadvertently used | |
| to automatically construct certificate chains. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.7.10" date="2015-02-10"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр use_temp_path директив proxy_cache_path, fastcgi_cache_path, | |
| scgi_cache_path и uwsgi_cache_path. | |
| </para> | |
| <para lang="en"> | |
| the "use_temp_path" parameter of the "proxy_cache_path", "fastcgi_cache_path", | |
| "scgi_cache_path", and "uwsgi_cache_path" directives. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $upstream_header_time. | |
| </para> | |
| <para lang="en"> | |
| the $upstream_header_time variable. | |
| </para> | |
| </change> | |
| <change type="workaround"> | |
| <para lang="ru"> | |
| теперь при переполнении диска nginx пытается писать error_log'и только | |
| раз в секунду. | |
| </para> | |
| <para lang="en"> | |
| now on disk overflow nginx tries to write error logs once a second only. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива try_files при тестировании каталогов | |
| не игнорировала обычные файлы.<br/> | |
| Спасибо Damien Tournoud. | |
| </para> | |
| <para lang="en"> | |
| the "try_files" directive did not ignore normal files | |
| while testing directories.<br/> | |
| Thanks to Damien Tournoud. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы sendfile на OS X | |
| возникали ошибки "sendfile() failed"; | |
| ошибка появилась в nginx 1.7.8. | |
| </para> | |
| <para lang="en"> | |
| alerts "sendfile() failed" | |
| if the "sendfile" directive was used on OS X; | |
| the bug had appeared in 1.7.8. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в лог могли писаться сообщения "sem_post() failed". | |
| </para> | |
| <para lang="en"> | |
| alerts "sem_post() failed" might appear in logs. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался с musl libc.<br/> | |
| Спасибо James Taylor. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built with musl libc.<br/> | |
| Thanks to James Taylor. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на Tru64 UNIX.<br/> | |
| Спасибо Goetz T. Fischer. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on Tru64 UNIX.<br/> | |
| Thanks to Goetz T. Fischer. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.7.9" date="2014-12-23"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы proxy_cache, fastcgi_cache, scgi_cache и uwsgi_cache | |
| поддерживают переменные. | |
| </para> | |
| <para lang="en"> | |
| variables support in the "proxy_cache", "fastcgi_cache", "scgi_cache", | |
| and "uwsgi_cache" directives. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива expires поддерживает переменные. | |
| </para> | |
| <para lang="en"> | |
| variables support in the "expires" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| возможность загрузки секретных ключей с аппаратных устройств | |
| с помощью OpenSSL engines.<br/> | |
| Спасибо Дмитрию Пичулину. | |
| </para> | |
| <para lang="en"> | |
| loading of secret keys from hardware tokens | |
| with OpenSSL engines.<br/> | |
| Thanks to Dmitrii Pichulin. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива autoindex_format. | |
| </para> | |
| <para lang="en"> | |
| the "autoindex_format" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ревалидация элементов кэша теперь используется только для ответов | |
| с кодами 200 и 206.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| cache revalidation is now only used for responses | |
| with 200 and 206 status codes.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| строка "TE" заголовка запроса клиента передавалась на бэкенд при проксировании. | |
| </para> | |
| <para lang="en"> | |
| the "TE" client request header line was passed to backends while proxying. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директивы proxy_pass, fastcgi_pass, scgi_pass и uwsgi_pass | |
| могли неправильно работать внутри блоков if и limit_except. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_pass", "fastcgi_pass", "scgi_pass", and "uwsgi_pass" directives | |
| might not work correctly inside the "if" and "limit_except" blocks. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива proxy_store с параметром "on" игнорировалась, | |
| если на предыдущем уровне использовалась директива proxy_store | |
| с явно заданным путём к файлам. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_store" directive with the "on" parameter was ignored | |
| if the "proxy_store" directive with an explicitly specified file path | |
| was used on a previous level. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался с BoringSSL.<br/> | |
| Спасибо Lukas Tribus. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built with BoringSSL.<br/> | |
| Thanks to Lukas Tribus. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.7.8" date="2014-12-02"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь строки "If-Modified-Since", "If-Range" и им подобные | |
| в заголовке запроса клиента передаются бэкенду при включённом кэшировании, | |
| если nginx заранее знает, что не будет кэшировать ответ | |
| (например, при использовании proxy_cache_min_uses). | |
| </para> | |
| <para lang="en"> | |
| now the "If-Modified-Since", "If-Range", etc. | |
| client request header lines are passed to a backend while caching | |
| if nginx knows in advance that the response will not be cached | |
| (e.g., when using proxy_cache_min_uses). | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь после истечения proxy_cache_lock_timeout | |
| nginx отправляет запрос на бэкенд без кэширования; | |
| новые директивы proxy_cache_lock_age, fastcgi_cache_lock_age, | |
| scgi_cache_lock_age и uwsgi_cache_lock_age позволяют указать, | |
| через какое время блокировка будет принудительно снята | |
| и будет сделана ещё одна попытка закэшировать ответ. | |
| </para> | |
| <para lang="en"> | |
| now after proxy_cache_lock_timeout | |
| nginx sends a request to a backend with caching disabled; | |
| the new directives "proxy_cache_lock_age", "fastcgi_cache_lock_age", | |
| "scgi_cache_lock_age", and "uwsgi_cache_lock_age" specify a time | |
| after which the lock will be released | |
| and another attempt to cache a response will be made. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| директива log_format теперь может использоваться только на уровне http. | |
| </para> | |
| <para lang="en"> | |
| the "log_format" directive can now be used only at http level. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы proxy_ssl_certificate, proxy_ssl_certificate_key, | |
| proxy_ssl_password_file, uwsgi_ssl_certificate, | |
| uwsgi_ssl_certificate_key и uwsgi_ssl_password_file.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_ssl_certificate", "proxy_ssl_certificate_key", | |
| "proxy_ssl_password_file", "uwsgi_ssl_certificate", | |
| "uwsgi_ssl_certificate_key", and "uwsgi_ssl_password_file" directives.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь с помощью X-Accel-Redirect | |
| можно перейти в именованный location.<br/> | |
| Спасибо Toshikuni Fukaya. | |
| </para> | |
| <para lang="en"> | |
| it is now possible to switch to a named location | |
| using "X-Accel-Redirect".<br/> | |
| Thanks to Toshikuni Fukaya. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь директива tcp_nodelay работает для SPDY-соединений. | |
| </para> | |
| <para lang="en"> | |
| now the "tcp_nodelay" directive works with SPDY connections. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| новые директивы в скриптах подсветки синтаксиса для vim.<br/> | |
| Спасибо Peter Wu. | |
| </para> | |
| <para lang="en"> | |
| new directives in vim syntax highliting scripts.<br/> | |
| Thanks to Peter Wu. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx игнорировал значение "s-maxage" | |
| в строке "Cache-Control" в заголовке ответа бэкенда.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| nginx ignored the "s-maxage" value | |
| in the "Cache-Control" backend response header line.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_spdy_module.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_spdy_module.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве ssl_password_file | |
| при использовании OpenSSL 0.9.8zc, 1.0.0o, 1.0.1j. | |
| </para> | |
| <para lang="en"> | |
| in the "ssl_password_file" directive | |
| when using OpenSSL 0.9.8zc, 1.0.0o, 1.0.1j. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы post_action | |
| в лог писались сообщения "header already sent"; | |
| ошибка появилась в nginx 1.5.4. | |
| </para> | |
| <para lang="en"> | |
| alerts "header already sent" appeared in logs | |
| if the "post_action" directive was used; | |
| the bug had appeared in 1.5.4. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы "postpone_output 0" с SSI-подзапросами | |
| в лог могли писаться сообщения "the http output chain is empty". | |
| </para> | |
| <para lang="en"> | |
| alerts "the http output chain is empty" might appear in logs | |
| if the "postpone_output 0" directive was used with SSI includes. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве proxy_cache_lock при использовании SSI-подзапросов.<br/> | |
| Спасибо Yichun Zhang. | |
| </para> | |
| <para lang="en"> | |
| in the "proxy_cache_lock" directive with SSI subrequests.<br/> | |
| Thanks to Yichun Zhang. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.7.7" date="2014-10-28"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь nginx учитывает при кэшировании строку "Vary" | |
| в заголовке ответа бэкенда. | |
| </para> | |
| <para lang="en"> | |
| now nginx takes into account the "Vary" | |
| header line in a backend response while caching. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы proxy_force_ranges, fastcgi_force_ranges, | |
| scgi_force_ranges и uwsgi_force_ranges. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_force_ranges", "fastcgi_force_ranges", | |
| "scgi_force_ranges", and "uwsgi_force_ranges" directives. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы proxy_limit_rate, fastcgi_limit_rate, | |
| scgi_limit_rate и uwsgi_limit_rate. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_limit_rate", "fastcgi_limit_rate", | |
| "scgi_limit_rate", and "uwsgi_limit_rate" directives. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр Vary директив proxy_ignore_headers, fastcgi_ignore_headers, | |
| scgi_ignore_headers и uwsgi_ignore_headers. | |
| </para> | |
| <para lang="en"> | |
| the "Vary" parameter of the "proxy_ignore_headers", "fastcgi_ignore_headers", | |
| "scgi_ignore_headers", and "uwsgi_ignore_headers" directives. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| последняя часть ответа, полученного от бэкенда | |
| при небуферизированном проксировании, | |
| могла не отправляться клиенту, | |
| если использовались директивы gzip или gunzip. | |
| </para> | |
| <para lang="en"> | |
| the last part of a response received from a backend | |
| with unbufferred proxy | |
| might not be sent to a client | |
| if "gzip" or "gunzip" directives were used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве proxy_cache_revalidate.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| in the "proxy_cache_revalidate" directive.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в обработке ошибок.<br/> | |
| Спасибо Yichun Zhang и Даниилу Бондареву. | |
| </para> | |
| <para lang="en"> | |
| in error handling.<br/> | |
| Thanks to Yichun Zhang and Daniil Bondarev. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директивах | |
| proxy_next_upstream_tries и proxy_next_upstream_timeout.<br/> | |
| Спасибо Feng Gu. | |
| </para> | |
| <para lang="en"> | |
| in the "proxy_next_upstream_tries" and "proxy_next_upstream_timeout" | |
| directives.<br/> | |
| Thanks to Feng Gu. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx/Windows не собирался с MinGW-w64 gcc.<br/> | |
| Спасибо Kouhei Sutou. | |
| </para> | |
| <para lang="en"> | |
| nginx/Windows could not be built with MinGW-w64 gcc.<br/> | |
| Thanks to Kouhei Sutou. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.7.6" date="2014-09-30"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| устаревшая директива limit_zone больше не поддерживается. | |
| </para> | |
| <para lang="en"> | |
| the deprecated "limit_zone" directive is not supported anymore. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| в директивах limit_conn_zone и limit_req_zone теперь можно использовать | |
| комбинации нескольких переменных. | |
| </para> | |
| <para lang="en"> | |
| the "limit_conn_zone" and "limit_req_zone" directives now can be used | |
| with combinations of multiple variables. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при повторной отправке FastCGI-запроса на бэкенд | |
| тело запроса могло передаваться неправильно. | |
| </para> | |
| <para lang="en"> | |
| request body might be transmitted incorrectly | |
| when retrying a FastCGI request to the next upstream server. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в логгировании в syslog. | |
| </para> | |
| <para lang="en"> | |
| in logging to syslog. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.7.5" date="2014-09-16"> | |
| <change type="security"> | |
| <para lang="ru"> | |
| при использовании общего для нескольких блоков server | |
| разделяемого кэша SSL-сессий или общего ключа для шифрования | |
| TLS session tickets было возможно повторно использовать | |
| SSL-сессию в контексте другого блока server (CVE-2014-3616).<br/> | |
| Спасибо Antoine Delignat-Lavaud. | |
| </para> | |
| <para lang="en"> | |
| it was possible to reuse SSL sessions in unrelated contexts | |
| if a shared SSL session cache or the same TLS session ticket key | |
| was used for multiple "server" blocks (CVE-2014-3616).<br/> | |
| Thanks to Antoine Delignat-Lavaud. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| директиву stub_status теперь можно указывать без параметров. | |
| </para> | |
| <para lang="en"> | |
| now the "stub_status" directive does not require a parameter. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр always директивы add_header. | |
| </para> | |
| <para lang="en"> | |
| the "always" parameter of the "add_header" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы | |
| proxy_next_upstream_tries, proxy_next_upstream_timeout, | |
| fastcgi_next_upstream_tries, fastcgi_next_upstream_timeout, | |
| memcached_next_upstream_tries, memcached_next_upstream_timeout, | |
| scgi_next_upstream_tries, scgi_next_upstream_timeout, | |
| uwsgi_next_upstream_tries и uwsgi_next_upstream_timeout. | |
| </para> | |
| <para lang="en"> | |
| the | |
| "proxy_next_upstream_tries", "proxy_next_upstream_timeout", | |
| "fastcgi_next_upstream_tries", "fastcgi_next_upstream_timeout", | |
| "memcached_next_upstream_tries", "memcached_next_upstream_timeout", | |
| "scgi_next_upstream_tries", "scgi_next_upstream_timeout", | |
| "uwsgi_next_upstream_tries", and "uwsgi_next_upstream_timeout" | |
| directives. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в параметре if директивы access_log. | |
| </para> | |
| <para lang="en"> | |
| in the "if" parameter of the "access_log" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_perl_module.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_perl_module.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива listen почтового прокси-сервера | |
| не позволяла указать более двух параметров. | |
| </para> | |
| <para lang="en"> | |
| the "listen" directive of the mail proxy module | |
| did not allow to specify more than two parameters. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива sub_filter не работала | |
| с заменяемой строкой из одного символа. | |
| </para> | |
| <para lang="en"> | |
| the "sub_filter" directive did not work | |
| with a string to replace consisting of a single character. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| запросы могли зависать, если использовался resolver | |
| и в процессе обращения к DNS-серверу происходил таймаут. | |
| </para> | |
| <para lang="en"> | |
| requests might hang if resolver was used | |
| and a timeout occurred during a DNS request. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_spdy_module при использовании совместно с AIO. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_spdy_module when using with AIO. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если с помощью директивы set изменялись переменные | |
| "$http_...", "$sent_http_..." или "$upstream_http_...". | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if the "set" directive was used to change the "$http_...", | |
| "$sent_http_...", or "$upstream_http_..." variables. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в обработке ошибок выделения памяти.<br/> | |
| Спасибо Markus Linnala и Feng Gu. | |
| </para> | |
| <para lang="en"> | |
| in memory allocation error handling.<br/> | |
| Thanks to Markus Linnala and Feng Gu. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.7.4" date="2014-08-05"> | |
| <change type="security"> | |
| <para lang="ru"> | |
| pipelined-команды не отбрасывались | |
| после команды STARTTLS в SMTP прокси-сервере (CVE-2014-3556); | |
| ошибка появилась в 1.5.6.<br/> | |
| Спасибо Chris Boulton. | |
| </para> | |
| <para lang="en"> | |
| pipelined commands were not discarded | |
| after STARTTLS command in SMTP proxy (CVE-2014-3556); | |
| the bug had appeared in 1.5.6.<br/> | |
| Thanks to Chris Boulton. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| экранирование символов в URI теперь использует | |
| шестнадцатеричные цифры в верхнем регистре.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| URI escaping now uses | |
| uppercase hexadecimal digits.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь nginx можно собрать с BoringSSL и LibreSSL.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| now nginx can be build with BoringSSL and LibreSSL.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| запросы могли зависать, если использовался resolver | |
| и DNS-сервер возвращал некорректный ответ; | |
| ошибка появилась в 1.5.8. | |
| </para> | |
| <para lang="en"> | |
| requests might hang if resolver was used | |
| and a DNS server returned a malformed response; | |
| the bug had appeared in 1.5.8. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_spdy_module.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_spdy_module.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| переменная $uri могла содержать мусор | |
| при возврате ошибок с кодом 400.<br/> | |
| Спасибо Сергею Боброву. | |
| </para> | |
| <para lang="en"> | |
| the $uri variable might contain garbage | |
| when returning errors with code 400.<br/> | |
| Thanks to Sergey Bobrov. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в обработке ошибок в директиве proxy_store | |
| и в модуле ngx_http_dav_module.<br/> | |
| Спасибо Feng Gu. | |
| </para> | |
| <para lang="en"> | |
| in error handling in the "proxy_store" directive | |
| and the ngx_http_dav_module.<br/> | |
| Thanks to Feng Gu. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при логгировании ошибок в syslog мог происходить segmentation fault; | |
| ошибка появилась в 1.7.1. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur if logging of errors to syslog was used; | |
| the bug had appeared in 1.7.1. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| переменные $geoip_latitude, $geoip_longitude, $geoip_dma_code | |
| и $geoip_area_code могли не работать.<br/> | |
| Спасибо Yichun Zhang. | |
| </para> | |
| <para lang="en"> | |
| the $geoip_latitude, $geoip_longitude, $geoip_dma_code, | |
| and $geoip_area_code variables might not work.<br/> | |
| Thanks to Yichun Zhang. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в обработке ошибок выделения памяти.<br/> | |
| Спасибо Tatsuhiko Kubo и Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| in memory allocation error handling.<br/> | |
| Thanks to Tatsuhiko Kubo and Piotr Sikora. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.7.3" date="2014-07-08"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| weak entity tags теперь не удаляются при изменениях ответа, | |
| а strong entity tags преобразуются в weak. | |
| </para> | |
| <para lang="en"> | |
| weak entity tags are now preserved on response modifications, | |
| and strong ones are changed to weak. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| ревалидация элементов кэша теперь, если это возможно, | |
| использует заголовок If-None-Match. | |
| </para> | |
| <para lang="en"> | |
| cache revalidation now uses If-None-Match header | |
| if possible. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива ssl_password_file. | |
| </para> | |
| <para lang="en"> | |
| the "ssl_password_file" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при возврате ответа из кэша | |
| заголовок запроса If-None-Match игнорировался, | |
| если в ответе не было заголовка Last-Modified. | |
| </para> | |
| <para lang="en"> | |
| the If-None-Match request header line was ignored | |
| if there was no Last-Modified header | |
| in a response returned from cache. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| сообщения "peer closed connection in SSL handshake" | |
| при соединении с бэкендами логгировались на уровне info вместо error. | |
| </para> | |
| <para lang="en"> | |
| "peer closed connection in SSL handshake" messages | |
| were logged at "info" level instead of "error" while connecting to backends. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_dav_module в nginx/Windows. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_dav_module module in nginx/Windows. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| SPDY-соединения могли неожиданно закрываться, | |
| если использовалось кэширование. | |
| </para> | |
| <para lang="en"> | |
| SPDY connections might be closed prematurely | |
| if caching was used. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.7.2" date="2014-06-17"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива hash в блоке upstream. | |
| </para> | |
| <para lang="en"> | |
| the "hash" directive inside the "upstream" block. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| дефрагментация свободных блоков разделяемой памяти.<br/> | |
| Спасибо Wandenberg Peixoto и Yichun Zhang. | |
| </para> | |
| <para lang="en"> | |
| defragmentation of free shared memory blocks.<br/> | |
| Thanks to Wandenberg Peixoto and Yichun Zhang. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если использовалось значение access_log по умолчанию; | |
| ошибка появилась в 1.7.0.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if the default value of the "access_log" directive was used; | |
| the bug had appeared in 1.7.0.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| завершающий слэш ошибочно удалялся | |
| из последнего параметра директивы try_files. | |
| </para> | |
| <para lang="en"> | |
| trailing slash was mistakenly removed | |
| from the last parameter of the "try_files" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx мог не собираться на OS X. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on OS X in some cases. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_spdy_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_spdy_module. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.7.1" date="2014-05-27"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменные "$upstream_cookie_...". | |
| </para> | |
| <para lang="en"> | |
| the "$upstream_cookie_..." variables. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $ssl_client_fingerprint. | |
| </para> | |
| <para lang="en"> | |
| the $ssl_client_fingerprint variable. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы error_log и access_log теперь поддерживают логгирование в syslog. | |
| </para> | |
| <para lang="en"> | |
| the "error_log" and "access_log" directives now support logging to syslog. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| почтовый прокси-сервер теперь логгирует порт клиента при соединении. | |
| </para> | |
| <para lang="en"> | |
| the mail proxy now logs client port on connect. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| утечки памяти при использовании директивы "ssl_stapling".<br/> | |
| Спасибо Filipe da Silva. | |
| </para> | |
| <para lang="en"> | |
| memory leak if the "ssl_stapling" directive was used.<br/> | |
| Thanks to Filipe da Silva. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива alias внутри location'а, заданного регулярным выражением, | |
| работала неправильно, если использовались директивы if или limit_except. | |
| </para> | |
| <para lang="en"> | |
| the "alias" directive used inside a location given by a regular expression | |
| worked incorrectly if the "if" or "limit_except" directives were used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива charset не ставила кодировку для сжатых ответов бэкендов. | |
| </para> | |
| <para lang="en"> | |
| the "charset" directive did not set a charset to encoded backend responses. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива proxy_pass без URI могла использовать оригинальный запрос | |
| после установки переменной $args.<br/> | |
| Спасибо Yichun Zhang. | |
| </para> | |
| <para lang="en"> | |
| a "proxy_pass" directive without URI part might use original request | |
| after the $args variable was set.<br/> | |
| Thanks to Yichun Zhang. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в работе параметра none директивы smtp_auth; | |
| ошибка появилась в 1.5.6.<br/> | |
| Спасибо Святославу Никольскому. | |
| </para> | |
| <para lang="en"> | |
| in the "none" parameter in the "smtp_auth" directive; | |
| the bug had appeared in 1.5.6.<br/> | |
| Thanks to Svyatoslav Nikolsky. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при совместном использовании sub_filter и SSI | |
| ответы могли передаваться неверно. | |
| </para> | |
| <para lang="en"> | |
| if sub_filter and SSI were used together, | |
| then responses might be transferred incorrectly. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался с параметром --with-file-aio на Linux/aarch64. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built with the --with-file-aio option on Linux/aarch64. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.7.0" date="2014-04-24"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| проверка SSL-сертификатов бэкендов. | |
| </para> | |
| <para lang="en"> | |
| backend SSL certificate verification. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка SNI при работе с бэкендами по SSL. | |
| </para> | |
| <para lang="en"> | |
| support for SNI while working with SSL backends. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $ssl_server_name. | |
| </para> | |
| <para lang="en"> | |
| the $ssl_server_name variable. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр if директивы access_log. | |
| </para> | |
| <para lang="en"> | |
| the "if" parameter of the "access_log" directive. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.5.13" date="2014-04-08"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| улучшена обработка хэш-таблиц; | |
| в директивах variables_hash_max_size и types_hash_bucket_size | |
| значения по умолчанию изменены на 1024 и 64 соответственно. | |
| </para> | |
| <para lang="en"> | |
| improved hash table handling; | |
| the default values of the "variables_hash_max_size" and | |
| "types_hash_bucket_size" were changed to 1024 and 64 respectively. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_mp4_module теперь понимает аргумент end. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_mp4_module now supports the "end" argument. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка byte ranges модулем ngx_http_mp4_module и при сохранении | |
| ответов в кэш. | |
| </para> | |
| <para lang="en"> | |
| byte ranges support in the ngx_http_mp4_module and while saving responses | |
| to cache. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| теперь nginx не пишет в лог сообщения "ngx_slab_alloc() failed: no memory" | |
| при использовании разделяемой памяти в ssl_session_cache | |
| и в модуле ngx_http_limit_req_module. | |
| </para> | |
| <para lang="en"> | |
| alerts "ngx_slab_alloc() failed: no memory" no longer logged | |
| when using shared memory in the "ssl_session_cache" directive | |
| and in the ngx_http_limit_req_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива underscores_in_headers | |
| не разрешала подчёркивание в первом символе заголовка.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| the "underscores_in_headers" directive | |
| did not allow underscore as a first character of a header.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| cache manager мог нагружать процессор при выходе в nginx/Windows. | |
| </para> | |
| <para lang="en"> | |
| cache manager might hog CPU on exit in nginx/Windows. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании ssl_session_cache с параметром shared | |
| рабочий процесс nginx/Windows завершался аварийно. | |
| </para> | |
| <para lang="en"> | |
| nginx/Windows terminated abnormally | |
| if the "ssl_session_cache" directive was used with the "shared" parameter. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_spdy_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_spdy_module. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.5.12" date="2014-03-18"> | |
| <change type="security"> | |
| <para lang="ru"> | |
| при обработке специально созданного запроса модулем ngx_http_spdy_module | |
| могло происходить переполнение буфера в рабочем процессе, | |
| что потенциально могло приводить к выполнению произвольного кода | |
| (CVE-2014-0133).<br/> | |
| Спасибо Lucas Molas из Programa STIC, Fundación Dr. Manuel | |
| Sadosky, Buenos Aires, Argentina. | |
| </para> | |
| <para lang="en"> | |
| a heap memory buffer overflow might occur in a worker process | |
| while handling a specially crafted request by ngx_http_spdy_module, | |
| potentially resulting in arbitrary code execution | |
| (CVE-2014-0133).<br/> | |
| Thanks to Lucas Molas, researcher at Programa STIC, Fundación Dr. Manuel | |
| Sadosky, Buenos Aires, Argentina. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр proxy_protocol в директивах listen и real_ip_header, | |
| переменная $proxy_protocol_addr. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_protocol" parameters of the "listen" and "real_ip_header" directives, | |
| the $proxy_protocol_addr variable. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве fastcgi_next_upstream.<br/> | |
| Спасибо Lucas Molas. | |
| </para> | |
| <para lang="en"> | |
| in the "fastcgi_next_upstream" directive.<br/> | |
| Thanks to Lucas Molas. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.5.11" date="2014-03-04"> | |
| <change type="security"> | |
| <para lang="ru"> | |
| при обработке специально созданного запроса модулем ngx_http_spdy_module | |
| на 32-битных платформах могла повреждаться память рабочего процесса, | |
| что потенциально могло приводить к выполнению произвольного кода | |
| (CVE-2014-0088); | |
| ошибка появилась в 1.5.10.<br/> | |
| Спасибо Lucas Molas из Programa STIC, Fundación Dr. Manuel | |
| Sadosky, Buenos Aires, Argentina. | |
| </para> | |
| <para lang="en"> | |
| memory corruption might occur in a worker process on 32-bit platforms | |
| while handling a specially crafted request by ngx_http_spdy_module, | |
| potentially resulting in arbitrary code execution (CVE-2014-0088); | |
| the bug had appeared in 1.5.10.<br/> | |
| Thanks to Lucas Molas, researcher at Programa STIC, Fundación Dr. Manuel | |
| Sadosky, Buenos Aires, Argentina. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $ssl_session_reused. | |
| </para> | |
| <para lang="en"> | |
| the $ssl_session_reused variable. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива client_max_body_size могла не работать | |
| при чтении тела запроса с использованием chunked transfer encoding; | |
| ошибка появилась в 1.3.9.<br/> | |
| Спасибо Lucas Molas. | |
| </para> | |
| <para lang="en"> | |
| the "client_max_body_size" directive might not work | |
| when reading a request body using chunked transfer encoding; | |
| the bug had appeared in 1.3.9.<br/> | |
| Thanks to Lucas Molas. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при проксировании WebSocket-соединений | |
| в рабочем процессе мог произойти segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| when proxying WebSocket connections. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если использовался модуль ngx_http_spdy_module на 32-битных платформах; | |
| ошибка появилась в 1.5.10. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if the ngx_http_spdy_module was used on 32-bit platforms; | |
| the bug had appeared in 1.5.10. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| значение переменной $upstream_status могло быть неверным, | |
| если использовались директивы proxy_cache_use_stale | |
| или proxy_cache_revalidate.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| the $upstream_status variable might contain wrong data | |
| if the "proxy_cache_use_stale" or "proxy_cache_revalidate" directives | |
| were used.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если ошибки с кодом 400 с помощью директивы error_page | |
| перенаправлялись в именованный location. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if errors with code 400 were redirected to a named location | |
| using the "error_page" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx/Windows не собирался с Visual Studio 2013. | |
| </para> | |
| <para lang="en"> | |
| nginx/Windows could not be built with Visual Studio 2013. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.5.10" date="2014-02-04"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_spdy_module теперь использует протокол SPDY 3.1.<br/> | |
| Спасибо Automattic и MaxCDN за спонсирование разработки. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_spdy_module now uses SPDY 3.1 protocol.<br/> | |
| Thanks to Automattic and MaxCDN for sponsoring this work. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_mp4_module теперь пропускает дорожки, | |
| имеющие меньшую длину, чем запрошенная перемотка. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_mp4_module now skips tracks | |
| too short for a seek requested. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если переменная $ssl_session_id использовалась при логгировании; | |
| ошибка появилась в 1.5.9. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if the $ssl_session_id variable was used in logs; | |
| the bug had appeared in 1.5.9. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| переменные $date_local и $date_gmt использовали неверный формат | |
| вне модуля ngx_http_ssi_filter_module. | |
| </para> | |
| <para lang="en"> | |
| the $date_local and $date_gmt variables used wrong format | |
| outside of the ngx_http_ssi_filter_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| клиентские соединения могли сразу закрываться, | |
| если использовался отложенный accept; | |
| ошибка появилась в 1.3.15. | |
| </para> | |
| <para lang="en"> | |
| client connections might be immediately closed | |
| if deferred accept was used; | |
| the bug had appeared in 1.3.15. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| сообщения "getsockopt(TCP_FASTOPEN) ... failed" записывались в лог | |
| в процессе обновления исполняемого файла на Linux; | |
| ошибка появилась в 1.5.8.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| alerts "getsockopt(TCP_FASTOPEN) ... failed" appeared in logs | |
| during binary upgrade on Linux; | |
| the bug had appeared in 1.5.8.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.5.9" date="2014-01-22"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь в заголовке X-Accel-Redirect nginx ожидает закодированный URI. | |
| </para> | |
| <para lang="en"> | |
| now nginx expects escaped URIs in "X-Accel-Redirect" headers. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива ssl_buffer_size. | |
| </para> | |
| <para lang="en"> | |
| the "ssl_buffer_size" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директиву limit_rate теперь можно использовать для | |
| ограничения скорости передачи ответов клиенту в SPDY-соединениях. | |
| </para> | |
| <para lang="en"> | |
| the "limit_rate" directive can now be used to | |
| rate limit responses sent in SPDY connections. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива spdy_chunk_size. | |
| </para> | |
| <para lang="en"> | |
| the "spdy_chunk_size" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива ssl_session_tickets.<br/> | |
| Спасибо Dirkjan Bussink. | |
| </para> | |
| <para lang="en"> | |
| the "ssl_session_tickets" directive.<br/> | |
| Thanks to Dirkjan Bussink. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| переменная $ssl_session_id содержала всю сессию в сериализованном виде | |
| вместо её идентификатора.<br/> | |
| Спасибо Ivan Ristić. | |
| </para> | |
| <para lang="en"> | |
| the $ssl_session_id variable contained full session serialized | |
| instead of just a session id.<br/> | |
| Thanks to Ivan Ristić. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx неправильно обрабатывал закодированный символ "?" в команде SSI include. | |
| </para> | |
| <para lang="en"> | |
| nginx incorrectly handled escaped "?" character in the "include" SSI command. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_dav_module не раскодировал целевой URI при | |
| обработке методов COPY и MOVE. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_dav_module did not unescape destination URI | |
| of the COPY and MOVE methods. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| resolver не понимал доменные имена с точкой в конце. | |
| Спасибо Yichun Zhang. | |
| </para> | |
| <para lang="en"> | |
| resolver did not understand domain names with a trailing dot. | |
| Thanks to Yichun Zhang. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при проксировании в логах могли появляться сообщения "zero size buf in output"; | |
| ошибка появилась в 1.3.9. | |
| </para> | |
| <para lang="en"> | |
| alerts "zero size buf in output" might appear in logs while proxying; | |
| the bug had appeared in 1.3.9. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если использовался модуль ngx_http_spdy_module. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if the ngx_http_spdy_module was used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании методов обработки соединений select, poll и /dev/poll | |
| проксируемые WebSocket-соединения могли зависать сразу после открытия. | |
| </para> | |
| <para lang="en"> | |
| proxied WebSocket connections might hang right after handshake | |
| if the select, poll, or /dev/poll methods were used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива xclient почтового прокси-сервера | |
| некорректно передавала IPv6-адреса. | |
| </para> | |
| <para lang="en"> | |
| the "xclient" directive of the mail proxy module | |
| incorrectly handled IPv6 client addresses. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.5.8" date="2013-12-17"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь resolver поддерживает IPv6. | |
| </para> | |
| <para lang="en"> | |
| IPv6 support in resolver. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива listen поддерживает параметр fastopen.<br/> | |
| Спасибо Mathew Rodley. | |
| </para> | |
| <para lang="en"> | |
| the "listen" directive supports the "fastopen" parameter.<br/> | |
| Thanks to Mathew Rodley. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка SSL в модуле ngx_http_uwsgi_module.<br/> | |
| Спасибо Roberto De Ioris. | |
| </para> | |
| <para lang="en"> | |
| SSL support in the ngx_http_uwsgi_module.<br/> | |
| Thanks to Roberto De Ioris. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| скрипты подсветки синтаксиса для vim добавлены в contrib.<br/> | |
| Спасибо Evan Miller. | |
| </para> | |
| <para lang="en"> | |
| vim syntax highlighting scripts were added to contrib.<br/> | |
| Thanks to Evan Miller. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при чтении тела запроса с использованием chunked transfer encoding | |
| по SSL-соединению мог произойти таймаут. | |
| </para> | |
| <para lang="en"> | |
| a timeout might occur while reading client request body | |
| in an SSL connection using chunked transfer encoding. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива master_process работала неправильно в nginx/Windows. | |
| </para> | |
| <para lang="en"> | |
| the "master_process" directive did not work correctly in nginx/Windows. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| параметр setfib директивы listen мог не работать. | |
| </para> | |
| <para lang="en"> | |
| the "setfib" parameter of the "listen" directive might not work. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_spdy_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_spdy_module. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.5.7" date="2013-11-19"> | |
| <change type="security"> | |
| <para lang="ru"> | |
| символ, следующий за незакодированным пробелом в строке запроса, | |
| обрабатывался неправильно (CVE-2013-4547); | |
| ошибка появилась в 0.8.41.<br/> | |
| Спасибо Ivan Fratric из Google Security Team. | |
| </para> | |
| <para lang="en"> | |
| a character following an unescaped space in a request line | |
| was handled incorrectly (CVE-2013-4547); | |
| the bug had appeared in 0.8.41.<br/> | |
| Thanks to Ivan Fratric of the Google Security Team. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| уровень логгирования ошибок auth_basic об отсутствии пароля | |
| понижен с уровня error до info. | |
| </para> | |
| <para lang="en"> | |
| a logging level of auth_basic errors about no user/password provided | |
| has been lowered from "error" to "info". | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы proxy_cache_revalidate, fastcgi_cache_revalidate, | |
| scgi_cache_revalidate и uwsgi_cache_revalidate. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_cache_revalidate", "fastcgi_cache_revalidate", | |
| "scgi_cache_revalidate", and "uwsgi_cache_revalidate" directives. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива ssl_session_ticket_key.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| the "ssl_session_ticket_key" directive.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива "add_header Cache-Control ''" | |
| добавляла строку заголовка ответа "Cache-Control" с пустым значением. | |
| </para> | |
| <para lang="en"> | |
| the directive "add_header Cache-Control ''" | |
| added a "Cache-Control" response header line with an empty value. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива "satisfy any" могла вернуть ошибку 403 вместо 401 | |
| при использовании директив auth_request и auth_basic.<br/> | |
| Спасибо Jan Marc Hoffmann. | |
| </para> | |
| <para lang="en"> | |
| the "satisfy any" directive might return 403 error instead of 401 | |
| if auth_request and auth_basic directives were used.<br/> | |
| Thanks to Jan Marc Hoffmann. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| параметры accept_filter и deferred директивы listen игнорировались | |
| для listen-сокетов, создаваемых в процессе обновления исполняемого файла.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| the "accept_filter" and "deferred" parameters of the "listen" directive | |
| were ignored for listen sockets created during binary upgrade.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| часть данных, полученных от бэкенда при небуферизированном проксировании, | |
| могла не отправляться клиенту сразу, | |
| если использовались директивы gzip или gunzip.<br/> | |
| Спасибо Yichun Zhang. | |
| </para> | |
| <para lang="en"> | |
| some data received from a backend with unbufferred proxy | |
| might not be sent to a client immediately | |
| if "gzip" or "gunzip" directives were used.<br/> | |
| Thanks to Yichun Zhang. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в обработке ошибок в модуле ngx_http_gunzip_filter_module. | |
| </para> | |
| <para lang="en"> | |
| in error handling in ngx_http_gunzip_filter_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ответы могли зависать, | |
| если использовался модуль ngx_http_spdy_module | |
| и директива auth_request. | |
| </para> | |
| <para lang="en"> | |
| responses might hang | |
| if the ngx_http_spdy_module was used | |
| with the "auth_request" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| утечки памяти в nginx/Windows. | |
| </para> | |
| <para lang="en"> | |
| memory leak in nginx/Windows. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.5.6" date="2013-10-01"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива fastcgi_buffering. | |
| </para> | |
| <para lang="en"> | |
| the "fastcgi_buffering" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы proxy_ssl_protocols и proxy_ssl_ciphers.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_ssl_protocols" and "proxy_ssl_ciphers" directives.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| оптимизация SSL handshake при использовании длинных цепочек сертификатов. | |
| </para> | |
| <para lang="en"> | |
| optimization of SSL handshakes when using long certificate chains. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| почтовый прокси-сервер поддерживает SMTP pipelining. | |
| </para> | |
| <para lang="en"> | |
| the mail proxy supports SMTP pipelining. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_auth_basic_module | |
| при использовании метода шифрования паролей "$apr1$".<br/> | |
| Спасибо Markus Linnala. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_auth_basic_module | |
| when using "$apr1$" password encryption method.<br/> | |
| Thanks to Markus Linnala. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| на MacOSX, Cygwin и nginx/Windows | |
| для обработки запроса мог использоваться неверный location, | |
| если для задания location'ов использовались символы разных регистров. | |
| </para> | |
| <para lang="en"> | |
| in MacOSX, Cygwin, and nginx/Windows | |
| incorrect location might be used to process a request | |
| if locations were given using characters in different cases. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| автоматическое перенаправление с добавлением завершающего слэша | |
| для проксированных location'ов могло не работать. | |
| </para> | |
| <para lang="en"> | |
| automatic redirect with appended trailing slash | |
| for proxied locations might not work. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в почтовом прокси-сервере. | |
| </para> | |
| <para lang="en"> | |
| in the mail proxy server. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_spdy_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_spdy_module. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.5.5" date="2013-09-17"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь nginx по умолчанию использует HTTP/1.0, | |
| если точно определить протокол не удалось. | |
| </para> | |
| <para lang="en"> | |
| now nginx assumes HTTP/1.0 by default | |
| if it is not able to detect protocol reliably. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива disable_symlinks теперь использует O_PATH на Linux. | |
| </para> | |
| <para lang="en"> | |
| the "disable_symlinks" directive now uses O_PATH on Linux. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| для определения того, что клиент закрыл соединение, | |
| при использовании метода epoll | |
| теперь используются события EPOLLRDHUP. | |
| </para> | |
| <para lang="en"> | |
| now nginx uses EPOLLRDHUP events | |
| to detect premature connection close by clients | |
| if the "epoll" method is used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве valid_referers при использовании параметра server_names. | |
| </para> | |
| <para lang="en"> | |
| in the "valid_referers" directive if the "server_names" parameter was used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| переменная $request_time не работала в nginx/Windows. | |
| </para> | |
| <para lang="en"> | |
| the $request_time variable did not work in nginx/Windows. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве image_filter.<br/> | |
| Спасибо Lanshun Zhou. | |
| </para> | |
| <para lang="en"> | |
| in the "image_filter" directive.<br/> | |
| Thanks to Lanshun Zhou. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| совместимость с OpenSSL 1.0.1f.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| OpenSSL 1.0.1f compatibility.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.5.4" date="2013-08-27"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| MIME-тип для расширения js изменён на "application/javascript"; | |
| значение по умолчанию директивы charset_types изменено соответственно. | |
| </para> | |
| <para lang="en"> | |
| the "js" extension MIME type has been changed to "application/javascript"; | |
| default value of the "charset_types" directive was changed accordingly. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь директива image_filter с параметром size | |
| возвращает ответ с MIME-типом "application/json". | |
| </para> | |
| <para lang="en"> | |
| now the "image_filter" directive with the "size" parameter | |
| returns responses with the "application/json" MIME type. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_auth_request_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_auth_request_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| на старте или во время переконфигурации мог произойти segmentation fault, | |
| если использовалась директива try_files с пустым параметром. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur on start or during reconfiguration | |
| if the "try_files" directive was used with an empty parameter. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| утечки памяти при использовании в директивах root и auth_basic_user_file | |
| относительных путей, заданных с помощью переменных. | |
| </para> | |
| <para lang="en"> | |
| memory leak if relative paths were specified using variables | |
| in the "root" or "auth_basic_user_file" directives. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива valid_referers неправильно выполняла регулярные выражения, | |
| если заголовок Referer начинался с "https://".<br/> | |
| Спасибо Liangbin Li. | |
| </para> | |
| <para lang="en"> | |
| the "valid_referers" directive incorrectly executed regular expressions | |
| if a "Referer" header started with "https://".<br/> | |
| Thanks to Liangbin Li. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ответы могли зависать, если использовались подзапросы и при обработке подзапроса | |
| происходила ошибка во время SSL handshake с бэкендом.<br/> | |
| Спасибо Aviram Cohen. | |
| </para> | |
| <para lang="en"> | |
| responses might hang if subrequests were used | |
| and an SSL handshake error happened during subrequest processing.<br/> | |
| Thanks to Aviram Cohen. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_autoindex_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_autoindex_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_spdy_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_spdy_module. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.5.3" date="2013-07-30"> | |
| <change> | |
| <para lang="ru"> | |
| Изменение во внутреннем API: | |
| теперь при небуферизированной работе с бэкендами | |
| u->length по умолчанию устанавливается в -1. | |
| </para> | |
| <para lang="en"> | |
| Change in internal API: | |
| now u->length defaults to -1 | |
| if working with backends in unbuffered mode. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь при получении неполного ответа от бэкенда | |
| nginx отправляет полученную часть ответа, | |
| после чего закрывает соединение с клиентом. | |
| </para> | |
| <para lang="en"> | |
| now after receiving an incomplete response from a backend server | |
| nginx tries to send an available part of the response to a client, | |
| and then closes client connection. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если использовался модуль ngx_http_spdy_module | |
| и директива client_body_in_file_only. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if the ngx_http_spdy_module was used | |
| with the "client_body_in_file_only" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| параметр so_keepalive директивы listen | |
| мог работать некорректно на DragonFlyBSD.<br/> | |
| Спасибо Sepherosa Ziehau. | |
| </para> | |
| <para lang="en"> | |
| the "so_keepalive" parameter of the "listen" directive | |
| might be handled incorrectly on DragonFlyBSD.<br/> | |
| Thanks to Sepherosa Ziehau. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_xslt_filter_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_xslt_filter_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_sub_filter_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_sub_filter_module. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.5.2" date="2013-07-02"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь можно использовать несколько директив error_log. | |
| </para> | |
| <para lang="en"> | |
| now several "error_log" directives can be used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| метод $r->header_in() встроенного перла не возвращал значения строк | |
| "Cookie" и "X-Forwarded-For" из заголовка запроса; | |
| ошибка появилась в 1.3.14. | |
| </para> | |
| <para lang="en"> | |
| the $r->header_in() embedded perl method did not return value of the | |
| "Cookie" and "X-Forwarded-For" request header lines; | |
| the bug had appeared in 1.3.14. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_spdy_module.<br/> | |
| Спасибо Jim Radford. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_spdy_module.<br/> | |
| Thanks to Jim Radford. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на Linux при использовании x32 ABI.<br/> | |
| Спасибо Сергею Иванцову. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on Linux with x32 ABI.<br/> | |
| Thanks to Serguei Ivantsov. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.5.1" date="2013-06-04"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы ssi_last_modified, sub_filter_last_modified и | |
| xslt_last_modified.<br/> | |
| Спасибо Алексею Колпакову. | |
| </para> | |
| <para lang="en"> | |
| the "ssi_last_modified", "sub_filter_last_modified", and | |
| "xslt_last_modified" directives.<br/> | |
| Thanks to Alexey Kolpakov. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр http_403 в директивах proxy_next_upstream, fastcgi_next_upstream, | |
| scgi_next_upstream и uwsgi_next_upstream. | |
| </para> | |
| <para lang="en"> | |
| the "http_403" parameter of the "proxy_next_upstream", "fastcgi_next_upstream", | |
| "scgi_next_upstream", and "uwsgi_next_upstream" directives. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы allow и deny теперь поддерживают unix domain сокеты. | |
| </para> | |
| <para lang="en"> | |
| the "allow" and "deny" directives now support unix domain sockets. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался с модулем ngx_mail_ssl_module, | |
| но без модуля ngx_http_ssl_module; | |
| ошибка появилась в 1.3.14. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built with the ngx_mail_ssl_module, | |
| but without ngx_http_ssl_module; | |
| the bug had appeared in 1.3.14. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве proxy_set_body.<br/> | |
| Спасибо Lanshun Zhou. | |
| </para> | |
| <para lang="en"> | |
| in the "proxy_set_body" directive.<br/> | |
| Thanks to Lanshun Zhou. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве lingering_time.<br/> | |
| Спасибо Lanshun Zhou. | |
| </para> | |
| <para lang="en"> | |
| in the "lingering_time" directive.<br/> | |
| Thanks to Lanshun Zhou. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| параметр fail_timeout директивы server | |
| в блоке upstream мог не работать, | |
| если использовался параметр max_fails; | |
| ошибка появилась в 1.3.0. | |
| </para> | |
| <para lang="en"> | |
| the "fail_timeout" parameter of the "server" directive | |
| in the "upstream" context might not work | |
| if "max_fails" parameter was used; | |
| the bug had appeared in 1.3.0. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если использовалась директива ssl_stapling.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if the "ssl_stapling" directive was used.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в почтовом прокси-сервере.<br/> | |
| Спасибо Filipe Da Silva. | |
| </para> | |
| <para lang="en"> | |
| in the mail proxy server.<br/> | |
| Thanks to Filipe Da Silva. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx/Windows мог перестать принимать соединения, | |
| если использовалось несколько рабочих процессов. | |
| </para> | |
| <para lang="en"> | |
| nginx/Windows might stop accepting connections | |
| if several worker processes were used. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.5.0" date="2013-05-07"> | |
| <change type="security"> | |
| <para lang="ru"> | |
| при обработке специально созданного запроса | |
| мог перезаписываться стек рабочего процесса, | |
| что могло приводить к выполнению произвольного кода (CVE-2013-2028); | |
| ошибка появилась в 1.3.9.<br/> | |
| Спасибо Greg MacManus, iSIGHT Partners Labs. | |
| </para> | |
| <para lang="en"> | |
| a stack-based buffer overflow might occur in a worker process | |
| while handling a specially crafted request, | |
| potentially resulting in arbitrary code execution (CVE-2013-2028); | |
| the bug had appeared in 1.3.9.<br/> | |
| Thanks to Greg MacManus, iSIGHT Partners Labs. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.4.0" date="2013-04-24"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался с модулем ngx_http_perl_module, | |
| если использовался параметр --with-openssl; | |
| ошибка появилась в 1.3.16. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built with the ngx_http_perl_module | |
| if the --with-openssl option was used; | |
| the bug had appeared in 1.3.16. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в работе с телом запроса из модуля ngx_http_perl_module; | |
| ошибка появилась в 1.3.9. | |
| </para> | |
| <para lang="en"> | |
| in a request body handling in the ngx_http_perl_module; | |
| the bug had appeared in 1.3.9. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.3.16" date="2013-04-16"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если использовались подзапросы; | |
| ошибка появилась в 1.3.9. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if subrequests were used; | |
| the bug had appeared in 1.3.9. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива tcp_nodelay вызывала ошибку | |
| при проксировании WebSocket-соединений в unix domain сокет. | |
| </para> | |
| <para lang="en"> | |
| the "tcp_nodelay" directive caused an error | |
| if a WebSocket connection was proxied into a unix domain socket. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| переменная $upstream_response_length возвращала значение "0", | |
| если не использовалась буферизация.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| the $upstream_response_length variable has an incorrect value "0" | |
| if buffering was not used.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в методах обработки соединений eventport и /dev/poll. | |
| </para> | |
| <para lang="en"> | |
| in the eventport and /dev/poll methods. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.3.15" date="2013-03-26"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| открытие и закрытие соединения без отправки в нём каких-либо данных | |
| больше не записывается в access_log с кодом ошибки 400. | |
| </para> | |
| <para lang="en"> | |
| opening and closing a connection without sending any data in it | |
| is no longer logged to access_log with error code 400. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_spdy_module.<br/> | |
| Спасибо Automattic за спонсирование разработки. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_spdy_module.<br/> | |
| Thanks to Automattic for sponsoring this work. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы limit_req_status и limit_conn_status.<br/> | |
| Спасибо Nick Marden. | |
| </para> | |
| <para lang="en"> | |
| the "limit_req_status" and "limit_conn_status" directives.<br/> | |
| Thanks to Nick Marden. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива image_filter_interlace.<br/> | |
| Спасибо Ивану Боброву. | |
| </para> | |
| <para lang="en"> | |
| the "image_filter_interlace" directive.<br/> | |
| Thanks to Ian Babrou. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $connections_waiting в модуле ngx_http_stub_status_module. | |
| </para> | |
| <para lang="en"> | |
| $connections_waiting variable in the ngx_http_stub_status_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь почтовый прокси-сервер поддерживает IPv6-бэкенды. | |
| </para> | |
| <para lang="en"> | |
| the mail proxy module now supports IPv6 backends. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при повторной отправке запроса на бэкенд | |
| тело запроса могло передаваться неправильно; | |
| ошибка появилась в 1.3.9.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| request body might be transmitted incorrectly | |
| when retrying a request to the next upstream server; | |
| the bug had appeared in 1.3.9.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве client_body_in_file_only; | |
| ошибка появилась в 1.3.9. | |
| </para> | |
| <para lang="en"> | |
| in the "client_body_in_file_only" directive; | |
| the bug had appeared in 1.3.9. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ответы могли зависать, | |
| если использовались подзапросы | |
| и при обработке подзапроса происходила DNS-ошибка.<br/> | |
| Спасибо Lanshun Zhou. | |
| </para> | |
| <para lang="en"> | |
| responses might hang | |
| if subrequests were used | |
| and a DNS error happened during subrequest processing.<br/> | |
| Thanks to Lanshun Zhou. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в процедуре учёта использования бэкендов. | |
| </para> | |
| <para lang="en"> | |
| in backend usage accounting. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.3.14" date="2013-03-05"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменные $connections_active, $connections_reading и $connections_writing | |
| в модуле ngx_http_stub_status_module. | |
| </para> | |
| <para lang="en"> | |
| $connections_active, $connections_reading, and $connections_writing variables | |
| in the ngx_http_stub_status_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка WebSocket-соединений | |
| в модулях ngx_http_uwsgi_module и ngx_http_scgi_module. | |
| </para> | |
| <para lang="en"> | |
| support of WebSocket connections | |
| in the ngx_http_uwsgi_module and ngx_http_scgi_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в обработке виртуальных серверов при использовании SNI. | |
| </para> | |
| <para lang="en"> | |
| in virtual servers handling with SNI. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы "ssl_session_cache shared" | |
| новые сессии могли не сохраняться, | |
| если заканчивалось место в разделяемой памяти.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| new sessions were not always stored | |
| if the "ssl_session_cache shared" directive was used | |
| and there was no free space in shared memory.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| несколько заголовков X-Forwarded-For обрабатывались неправильно.<br/> | |
| Спасибо Neal Poole за спонсирование разработки. | |
| </para> | |
| <para lang="en"> | |
| multiple X-Forwarded-For headers were handled incorrectly.<br/> | |
| Thanks to Neal Poole for sponsoring this work. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_mp4_module.<br/> | |
| Спасибо Gernot Vormayr. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_mp4_module.<br/> | |
| Thanks to Gernot Vormayr. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.3.13" date="2013-02-19"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь для сборки по умолчанию используется компилятор с именем "cc". | |
| </para> | |
| <para lang="en"> | |
| a compiler with name "cc" is now used by default. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка проксирования WebSocket-соединений.<br/> | |
| Спасибо Apcera и CloudBees за спонсирование разработки. | |
| </para> | |
| <para lang="en"> | |
| support for proxying of WebSocket connections.<br/> | |
| Thanks to Apcera and CloudBees for sponsoring this work. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива auth_basic_user_file поддерживает шифрование паролей | |
| методом "{SHA}".<br/> | |
| Спасибо Louis Opter. | |
| </para> | |
| <para lang="en"> | |
| the "auth_basic_user_file" directive supports "{SHA}" | |
| password encryption method.<br/> | |
| Thanks to Louis Opter. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.3.12" date="2013-02-05"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы proxy_bind, fastcgi_bind, memcached_bind, scgi_bind и uwsgi_bind | |
| поддерживают переменные. | |
| </para> | |
| <para lang="en"> | |
| variables support in the "proxy_bind", "fastcgi_bind", "memcached_bind", | |
| "scgi_bind", and "uwsgi_bind" directives. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменные $pipe, $request_length, $time_iso8601 и $time_local | |
| теперь можно использовать не только в директиве log_format.<br/> | |
| Спасибо Kiril Kalchev. | |
| </para> | |
| <para lang="en"> | |
| the $pipe, $request_length, $time_iso8601, and $time_local variables | |
| can now be used not only in the "log_format" directive. | |
| Thanks to Kiril Kalchev. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка IPv6 в модуле ngx_http_geoip_module.<br/> | |
| Спасибо Gregor Kališnik. | |
| </para> | |
| <para lang="en"> | |
| IPv6 support in the ngx_http_geoip_module.<br/> | |
| Thanks to Gregor Kališnik. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива proxy_method работала неверно, если была указана на уровне http. | |
| </para> | |
| <para lang="en"> | |
| in the "proxy_method" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если использовался resolver и метод poll. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if resolver was used with the poll method. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx мог нагружать процессор во время SSL handshake с бэкендом | |
| при использовании методов обработки соединений select, poll и /dev/poll. | |
| </para> | |
| <para lang="en"> | |
| nginx might hog CPU during SSL handshake with a backend | |
| if the select, poll, or /dev/poll methods were used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибка "[crit] SSL_write() failed (SSL:)". | |
| </para> | |
| <para lang="en"> | |
| the "[crit] SSL_write() failed (SSL:)" error. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве client_body_in_file_only; | |
| ошибка появилась в 1.3.9. | |
| </para> | |
| <para lang="en"> | |
| in the "client_body_in_file_only" directive; | |
| the bug had appeared in 1.3.9. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве fastcgi_keep_conn. | |
| </para> | |
| <para lang="en"> | |
| in the "fastcgi_keep_conn" directive. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.3.11" date="2013-01-10"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при записи в лог мог происходить segmentation fault; | |
| ошибка появилась в 1.3.10. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur if logging was used; | |
| the bug had appeared in 1.3.10. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива proxy_pass не работала с IP-адресами | |
| без явного указания порта; | |
| ошибка появилась в 1.3.10. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_pass" directive did not work with IP addresses | |
| without port specified; | |
| the bug had appeared in 1.3.10. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| на старте или во время переконфигурации происходил segmentation fault, | |
| если директива keepalive была указана несколько раз | |
| в одном блоке upstream. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault occurred on start or during reconfiguration | |
| if the "keepalive" directive was specified more than once | |
| in a single upstream block. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| параметр default директивы geo не определял значение по умолчанию | |
| для IPv6-адресов. | |
| </para> | |
| <para lang="en"> | |
| parameter "default" of the "geo" directive did not set default value | |
| for IPv6 addresses. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.3.10" date="2012-12-25"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| для указанных в конфигурационном файле доменных имён теперь | |
| используются не только IPv4, но и IPv6 адреса. | |
| </para> | |
| <para lang="en"> | |
| domain names specified in configuration file | |
| are now resolved to IPv6 addresses as well as IPv4 ones. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь при использовании директивы include с маской на Unix-системах | |
| включаемые файлы сортируются в алфавитном порядке. | |
| </para> | |
| <para lang="en"> | |
| now if the "include" directive with mask is used on Unix systems, | |
| included files are sorted in alphabetical order. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| директива add_header добавляет строки в ответы с кодом 201. | |
| </para> | |
| <para lang="en"> | |
| the "add_header" directive adds headers to 201 responses. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива geo теперь поддерживает IPv6 адреса в формате CIDR. | |
| </para> | |
| <para lang="en"> | |
| the "geo" directive now supports IPv6 addresses in CIDR notation. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметры flush и gzip в директиве access_log. | |
| </para> | |
| <para lang="en"> | |
| the "flush" and "gzip" parameters of the "access_log" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива auth_basic поддерживает переменные. | |
| </para> | |
| <para lang="en"> | |
| variables support in the "auth_basic" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx в некоторых случаях не собирался с модулем ngx_http_perl_module. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built with the ngx_http_perl_module in some cases. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если использовался модуль ngx_http_xslt_module. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if the ngx_http_xslt_module was used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx мог не собираться на MacOSX.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on MacOSX in some cases.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы limit_rate с большими значениями скорости | |
| на 32-битных системах ответ мог возвращаться не целиком.<br/> | |
| Спасибо Алексею Антропову. | |
| </para> | |
| <para lang="en"> | |
| the "limit_rate" directive with high rates | |
| might result in truncated responses on 32-bit platforms.<br/> | |
| Thanks to Alexey Antropov. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если использовалась директива if.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if the "if" directive was used.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ответ "100 Continue" выдавался | |
| вместе с ответом "413 Request Entity Too Large". | |
| </para> | |
| <para lang="en"> | |
| a "100 Continue" response was issued | |
| with "413 Request Entity Too Large" responses. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директивы image_filter, image_filter_jpeg_quality и image_filter_sharpen | |
| могли наследоваться некорректно.<br/> | |
| Спасибо Ивану Боброву. | |
| </para> | |
| <para lang="en"> | |
| the "image_filter", "image_filter_jpeg_quality" | |
| and "image_filter_sharpen" directives | |
| might be inherited incorrectly.<br/> | |
| Thanks to Ian Babrou. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы auth_basic под Linux | |
| могли возникать ошибки "crypt_r() failed". | |
| </para> | |
| <para lang="en"> | |
| "crypt_r() failed" errors might appear | |
| if the "auth_basic" directive was used on Linux. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в обработке backup-серверов.<br/> | |
| Спасибо Thomas Chen. | |
| </para> | |
| <para lang="en"> | |
| in backup servers handling.<br/> | |
| Thanks to Thomas Chen. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при проксировании HEAD-запросов мог возвращаться некорректный ответ, | |
| если использовалась директива gzip. | |
| </para> | |
| <para lang="en"> | |
| proxied HEAD requests might return incorrect response | |
| if the "gzip" directive was used. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.3.9" date="2012-11-27"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка chunked transfer encoding при получении тела запроса. | |
| </para> | |
| <para lang="en"> | |
| support for chunked transfer encoding while reading client request body. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменные $request_time и $msec | |
| теперь можно использовать не только в директиве log_format. | |
| </para> | |
| <para lang="en"> | |
| the $request_time and $msec variables | |
| can now be used not only in the "log_format" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| cache manager и cache loader могли не запускаться, | |
| если использовалось более 512 listen-сокетов. | |
| </para> | |
| <para lang="en"> | |
| cache manager and cache loader processes might not be able to start | |
| if more than 512 listen sockets were used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_dav_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_dav_module. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.3.8" date="2012-10-30"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр optional_no_ca директивы ssl_verify_client.<br/> | |
| Спасибо Михаилу Казанцеву и Eric O'Connor. | |
| </para> | |
| <para lang="en"> | |
| the "optional_no_ca" parameter of the "ssl_verify_client" directive.<br/> | |
| Thanks to Mike Kazantsev and Eric O'Connor. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменные $bytes_sent, $connection и $connection_requests | |
| теперь можно использовать не только в директиве log_format.<br/> | |
| Спасибо Benjamin Grössing. | |
| </para> | |
| <para lang="en"> | |
| the $bytes_sent, $connection, and $connection_requests variables | |
| can now be used not only in the "log_format" directive.<br/> | |
| Thanks to Benjamin Grössing. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр auto директивы worker_processes. | |
| </para> | |
| <para lang="en"> | |
| the "auto" parameter of the "worker_processes" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| сообщения "cache file ... has md5 collision". | |
| </para> | |
| <para lang="en"> | |
| "cache file ... has md5 collision" alert. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_gunzip_filter_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_gunzip_filter_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве ssl_stapling. | |
| </para> | |
| <para lang="en"> | |
| in the "ssl_stapling" directive. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.3.7" date="2012-10-02"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка OCSP stapling.<br/> | |
| Спасибо Comodo, DigiCert и GlobalSign за спонсирование разработки. | |
| </para> | |
| <para lang="en"> | |
| OCSP stapling support.<br/> | |
| Thanks to Comodo, DigiCert and GlobalSign for sponsoring this work. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива ssl_trusted_certificate. | |
| </para> | |
| <para lang="en"> | |
| the "ssl_trusted_certificate" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь resolver случайным образом меняет порядок | |
| возвращаемых закэшированных адресов.<br/> | |
| Спасибо Антону Жулину. | |
| </para> | |
| <para lang="en"> | |
| resolver now randomly rotates addresses | |
| returned from cache.<br/> | |
| Thanks to Anton Jouline. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| совместимость с OpenSSL 0.9.7. | |
| </para> | |
| <para lang="en"> | |
| OpenSSL 0.9.7 compatibility. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.3.6" date="2012-09-12"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_gunzip_filter_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_gunzip_filter_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива memcached_gzip_flag. | |
| </para> | |
| <para lang="en"> | |
| the "memcached_gzip_flag" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр always директивы gzip_static. | |
| </para> | |
| <para lang="en"> | |
| the "always" parameter of the "gzip_static" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве "limit_req"; | |
| ошибка появилась в 1.1.14.<br/> | |
| Спасибо Charles Chen. | |
| </para> | |
| <para lang="en"> | |
| in the "limit_req" directive; | |
| the bug had appeared in 1.1.14.<br/> | |
| Thanks to Charles Chen. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался gcc 4.7 с оптимизацией -O2 | |
| если использовался параметр --with-ipv6. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built by gcc 4.7 with -O2 optimization | |
| if the --with-ipv6 option was used. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.3.5" date="2012-08-21"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| модуль ngx_http_mp4_module больше не отфильтровывает дорожки | |
| в форматах, отличных от H.264 и AAC. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_mp4_module module no longer skips | |
| tracks in formats other than H.264 and AAC. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если в директиве map в качестве значений использовались переменные. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if the "map" directive was used with variables as values. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault | |
| при использовании директивы geo с параметром ranges, | |
| но без параметра default; ошибка появилась в 0.8.43.<br/> | |
| Спасибо Zhen Chen и Weibin Yao. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if the "geo" directive was used with the "ranges" parameter | |
| but without the "default" parameter; the bug had appeared in 0.8.43.<br/> | |
| Thanks to Zhen Chen and Weibin Yao. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в обработке параметра командной строки -p. | |
| </para> | |
| <para lang="en"> | |
| in the -p command-line parameter handling. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в почтовом прокси-сервере. | |
| </para> | |
| <para lang="en"> | |
| in the mail proxy server. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| незначительных потенциальных ошибок.<br/> | |
| Спасибо Coverity. | |
| </para> | |
| <para lang="en"> | |
| of minor potential bugs.<br/> | |
| Thanks to Coverity. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx/Windows не собирался с Visual Studio 2005 Express.<br/> | |
| Спасибо HAYASHI Kentaro. | |
| </para> | |
| <para lang="en"> | |
| nginx/Windows could not be built with Visual Studio 2005 Express.<br/> | |
| Thanks to HAYASHI Kentaro. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.3.4" date="2012-07-31"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь на слушающих IPv6-сокетах параметр ipv6only | |
| включён по умолчанию. | |
| </para> | |
| <para lang="en"> | |
| the "ipv6only" parameter is now turned on by default for | |
| listening IPv6 sockets. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка компилятора Clang. | |
| </para> | |
| <para lang="en"> | |
| the Clang compiler support. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| могли создаваться лишние слушающие сокеты.<br/> | |
| Спасибо Роману Одайскому. | |
| </para> | |
| <para lang="en"> | |
| extra listening sockets might be created.<br/> | |
| Thanks to Roman Odaisky. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx/Windows мог нагружать процессор, если при запуске рабочего процесса | |
| происходила ошибка.<br/> | |
| Спасибо Ricardo Villalobos Guevara. | |
| </para> | |
| <para lang="en"> | |
| nginx/Windows might hog CPU if a worker process failed to start.<br/> | |
| Thanks to Ricardo Villalobos Guevara. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директивы proxy_pass_header, fastcgi_pass_header, scgi_pass_header, | |
| uwsgi_pass_header, proxy_hide_header, fastcgi_hide_header, | |
| scgi_hide_header и uwsgi_hide_header | |
| могли наследоваться некорректно. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_pass_header", "fastcgi_pass_header", "scgi_pass_header", | |
| "uwsgi_pass_header", "proxy_hide_header", "fastcgi_hide_header", | |
| "scgi_hide_header", and "uwsgi_hide_header" directives | |
| might be inherited incorrectly. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.3.3" date="2012-07-10"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка entity tags и директива etag. | |
| </para> | |
| <para lang="en"> | |
| entity tags support and the "etag" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы map с параметром hostnames | |
| не игнорировалась конечная точка в исходном значении. | |
| </para> | |
| <para lang="en"> | |
| trailing dot in a source value was not ignored | |
| if the "map" directive was used with the "hostnames" parameter. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| для обработки запроса мог использоваться неверный location, | |
| если переход в именованный location происходил | |
| после изменения URI с помощью директивы rewrite. | |
| </para> | |
| <para lang="en"> | |
| incorrect location might be used to process a request | |
| if a URI was changed via a "rewrite" directive | |
| before an internal redirect to a named location. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.3.2" date="2012-06-26"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| параметр single директивы keepalive теперь игнорируется. | |
| </para> | |
| <para lang="en"> | |
| the "single" parameter of the "keepalive" directive is now ignored. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| сжатие SSL теперь отключено | |
| в том числе при использовании OpenSSL старее 1.0.0. | |
| </para> | |
| <para lang="en"> | |
| SSL compression is now disabled when using all versions of OpenSSL, | |
| including ones prior to 1.0.0. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директиву "ip_hash" теперь можно использовать для балансировки IPv6 клиентов. | |
| </para> | |
| <para lang="en"> | |
| it is now possible to use the "ip_hash" directive to balance IPv6 clients. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменную $status теперь можно использовать не только в директиве log_format. | |
| </para> | |
| <para lang="en"> | |
| the $status variable can now be used not only in the "log_format" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при завершении рабочего процесса мог произойти segmentation fault, | |
| если использовалась директива resolver. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process on shutdown | |
| if the "resolver" directive was used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если использовался модуль ngx_http_mp4_module. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if the ngx_http_mp4_module was used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_mp4_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_mp4_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если использовались конфликтующие имена серверов с масками. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if conflicting wildcard server names were used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| на платформе ARM nginx мог аварийно завершаться по сигналу SIGBUS. | |
| </para> | |
| <para lang="en"> | |
| nginx might be terminated abnormally on a SIGBUS signal on ARM platform. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| во время переконфигурации на HP-UX в лог | |
| записывался alert "sendmsg() failed (9: Bad file number)". | |
| </para> | |
| <para lang="en"> | |
| an alert "sendmsg() failed (9: Bad file number)" on HP-UX | |
| while reconfiguration. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.3.1" date="2012-06-05"> | |
| <change type="security"> | |
| <para lang="ru"> | |
| теперь nginx/Windows игнорирует точку в конце компонента URI | |
| и не разрешает URI, содержащие последовательность ":$".<br/> | |
| Спасибо Владимиру Кочеткову, Positive Research Center. | |
| </para> | |
| <para lang="en"> | |
| now nginx/Windows ignores trailing dot in URI path component, and | |
| does not allow URIs with ":$" in it.<br/> | |
| Thanks to Vladimir Kochetkov, Positive Research Center. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы proxy_pass, fastcgi_pass, scgi_pass, uwsgi_pass и | |
| директива server в блоке upstream | |
| теперь поддерживают IPv6-адреса. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_pass", "fastcgi_pass", "scgi_pass", "uwsgi_pass" directives, and | |
| the "server" directive inside the "upstream" block, | |
| now support IPv6 addresses. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| в директиве resolver теперь можно указывать порт и | |
| задавать IPv6-адреса DNS-серверов. | |
| </para> | |
| <para lang="en"> | |
| the "resolver" directive now supports IPv6 addresses and | |
| an optional port specification. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива least_conn в блоке upstream. | |
| </para> | |
| <para lang="en"> | |
| the "least_conn" directive inside the "upstream" block. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| при использовании директивы ip_hash | |
| теперь можно задавать веса серверов. | |
| </para> | |
| <para lang="en"> | |
| it is now possible to specify a weight for servers | |
| while using the "ip_hash" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если использовалась директива image_filter; | |
| ошибка появилась в 1.3.0. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if the "image_filter" directive was used; | |
| the bug had appeared in 1.3.0. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался с модулем ngx_cpp_test_module; | |
| ошибка появилась в 1.1.12. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built with ngx_cpp_test_module; | |
| the bug had appeared in 1.1.12. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| доступ к переменным из SSI и встроенного перла мог не работать после | |
| переконфигурации.<br/> | |
| Спасибо Yichun Zhang. | |
| </para> | |
| <para lang="en"> | |
| access to variables from SSI and embedded perl module might not work after | |
| reconfiguration.<br/> | |
| Thanks to Yichun Zhang. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_xslt_filter_module.<br/> | |
| Спасибо Kuramoto Eiji. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_xslt_filter_module.<br/> | |
| Thanks to Kuramoto Eiji. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| утечки памяти при использовании переменной $geoip_org.<br/> | |
| Спасибо Денису Латыпову. | |
| </para> | |
| <para lang="en"> | |
| memory leak if $geoip_org variable was used.<br/> | |
| Thanks to Denis F. Latypoff. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директивах proxy_cookie_domain и proxy_cookie_path. | |
| </para> | |
| <para lang="en"> | |
| in the "proxy_cookie_domain" and "proxy_cookie_path" directives. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.3.0" date="2012-05-15"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива debug_connection теперь поддерживает IPv6-адреса | |
| и параметр "unix:". | |
| </para> | |
| <para lang="en"> | |
| the "debug_connection" directive now supports IPv6 addresses | |
| and the "unix:" parameter. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива set_real_ip_from и параметр proxy | |
| директивы geo теперь поддерживают IPv6-адреса. | |
| </para> | |
| <para lang="en"> | |
| the "set_real_ip_from" directive and the "proxy" parameter | |
| of the "geo" directive now support IPv6 addresses. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы real_ip_recursive, geoip_proxy и geoip_proxy_recursive. | |
| </para> | |
| <para lang="en"> | |
| the "real_ip_recursive", "geoip_proxy", and "geoip_proxy_recursive" directives. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр proxy_recursive директивы geo. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_recursive" parameter of the "geo" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если использовалась директива resolver. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if the "resolver" directive was used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если использовались директивы fastcgi_pass, scgi_pass или uwsgi_pass | |
| и бэкенд возвращал некорректный ответ. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if the "fastcgi_pass", "scgi_pass", or "uwsgi_pass" directives were used | |
| and backend returned incorrect response. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если использовалась директива rewrite и в новых аргументах запроса в строке | |
| замены использовались переменные. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if the "rewrite" directive was used and new request arguments | |
| in a replacement used variables. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx мог нагружать процессор, | |
| если было достигнуто ограничение на количество открытых файлов. | |
| </para> | |
| <para lang="en"> | |
| nginx might hog CPU | |
| if the open file resource limit was reached. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы proxy_next_upstream с параметром http_404 | |
| nginx мог бесконечно перебирать бэкенды, если в блоке upstream был | |
| хотя бы один сервер с флагом backup. | |
| </para> | |
| <para lang="en"> | |
| nginx might loop infinitely over backends | |
| if the "proxy_next_upstream" directive with the "http_404" parameter was used | |
| and there were backup servers specified in an upstream block. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы ip_hash | |
| установка параметра down директивы server | |
| могла приводить к ненужному перераспределению клиентов между бэкендами. | |
| </para> | |
| <para lang="en"> | |
| adding the "down" parameter of the "server" directive | |
| might cause unneeded client redistribution among backend servers | |
| if the "ip_hash" directive was used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| утечки сокетов.<br/> | |
| Спасибо Yichun Zhang. | |
| </para> | |
| <para lang="en"> | |
| socket leak.<br/> | |
| Thanks to Yichun Zhang. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_fastcgi_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_fastcgi_module. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.2.0" date="2012-04-23"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если использовалась директива try_files; | |
| ошибка появилась в 1.1.19. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if the "try_files" directive was used; | |
| the bug had appeared in 1.1.19. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ответ мог быть передан не полностью, | |
| если использовалось больше IOV_MAX буферов. | |
| </para> | |
| <para lang="en"> | |
| response might be truncated | |
| if there were more than IOV_MAX buffers used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в работе параметра crop директивы image_filter.<br/> | |
| Спасибо Maxim Bublis. | |
| </para> | |
| <para lang="en"> | |
| in the "crop" parameter of the "image_filter" directive.<br/> | |
| Thanks to Maxim Bublis. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.1.19" date="2012-04-12"> | |
| <change type="security"> | |
| <para lang="ru"> | |
| при обработке специально созданного mp4 файла модулем ngx_http_mp4_module | |
| могли перезаписываться области памяти рабочего процесса, что могло | |
| приводить к выполнению произвольного кода (CVE-2012-2089).<br/> | |
| Спасибо Matthew Daley. | |
| </para> | |
| <para lang="en"> | |
| specially crafted mp4 file might allow to overwrite | |
| memory locations in a worker process | |
| if the ngx_http_mp4_module was used, | |
| potentially resulting in arbitrary code execution (CVE-2012-2089).<br/> | |
| Thanks to Matthew Daley. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx/Windows мог завершаться аварийно.<br/> | |
| Спасибо Vincent Lee. | |
| </para> | |
| <para lang="en"> | |
| nginx/Windows might be terminated abnormally.<br/> | |
| Thanks to Vincent Lee. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx нагружал процессор, если все серверы в upstream'е были помечены | |
| флагом backup. | |
| </para> | |
| <para lang="en"> | |
| nginx hogged CPU if all servers in an upstream were marked as "backup". | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директивы allow и deny могли наследоваться некорректно, | |
| если в них использовались IPv6 адреса. | |
| </para> | |
| <para lang="en"> | |
| the "allow" and "deny" directives might be inherited incorrectly | |
| if they were used with IPv6 addresses. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директивы modern_browser и ancient_browser | |
| могли наследоваться некорректно. | |
| </para> | |
| <para lang="en"> | |
| the "modern_browser" and "ancient_browser" directives | |
| might be inherited incorrectly. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| таймауты могли работать некорректно на Solaris/SPARC. | |
| </para> | |
| <para lang="en"> | |
| timeouts might be handled incorrectly on Solaris/SPARC. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_mp4_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_mp4_module. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.1.18" date="2012-03-28"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь keepalive соединения не запрещены для Safari по умолчанию. | |
| </para> | |
| <para lang="en"> | |
| keepalive connections are no longer disabled for Safari by default. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $connection_requests. | |
| </para> | |
| <para lang="en"> | |
| the $connection_requests variable. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменные $tcpinfo_rtt, $tcpinfo_rttvar, $tcpinfo_snd_cwnd и | |
| $tcpinfo_rcv_space. | |
| </para> | |
| <para lang="en"> | |
| $tcpinfo_rtt, $tcpinfo_rttvar, $tcpinfo_snd_cwnd and | |
| $tcpinfo_rcv_space variables. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива worker_cpu_affinity теперь работает на FreeBSD. | |
| </para> | |
| <para lang="en"> | |
| the "worker_cpu_affinity" directive now works on FreeBSD. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы xslt_param и xslt_string_param.<br/> | |
| Спасибо Samuel Behan. | |
| </para> | |
| <para lang="en"> | |
| the "xslt_param" and "xslt_string_param" directives.<br/> | |
| Thanks to Samuel Behan. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в configure.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| in configure tests.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_xslt_filter_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_xslt_filter_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на Debian GNU/Hurd. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on Debian GNU/Hurd. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.1.17" date="2012-03-15"> | |
| <change type="security"> | |
| <para lang="ru"> | |
| содержимое ранее освобождённой памяти могло быть отправлено клиенту, | |
| если бэкенд возвращал специально созданный ответ.<br/> | |
| Спасибо Matthew Daley. | |
| </para> | |
| <para lang="en"> | |
| content of previously freed memory might be sent to a client | |
| if backend returned specially crafted response.<br/> | |
| Thanks to Matthew Daley. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании встроенного перла из SSI.<br/> | |
| Спасибо Matthew Daley. | |
| </para> | |
| <para lang="en"> | |
| in the embedded perl module if used from SSI.<br/> | |
| Thanks to Matthew Daley. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_uwsgi_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_uwsgi_module. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.1.16" date="2012-02-29"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| ограничение на количество одновременных подзапросов поднято до 200. | |
| </para> | |
| <para lang="en"> | |
| the simultaneous subrequest limit has been raised to 200. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр from в директиве disable_symlinks. | |
| </para> | |
| <para lang="en"> | |
| the "from" parameter of the "disable_symlinks" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы return и error_page теперь могут использоваться для возврата | |
| перенаправлений с кодом 307. | |
| </para> | |
| <para lang="en"> | |
| the "return" and "error_page" directives can now be used to return 307 | |
| redirections. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если использовалась директива resolver | |
| и на глобальном уровне не была задана директива error_log.<br/> | |
| Спасибо Роману Арутюняну. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if the "resolver" directive was used | |
| and there was no "error_log" directive specified at global level.<br/> | |
| Thanks to Roman Arutyunyan. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если использовались директивы "proxy_http_version 1.1" или | |
| "fastcgi_keep_conn on". | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if the "proxy_http_version 1.1" or "fastcgi_keep_conn on" directives | |
| were used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| утечек памяти.<br/> | |
| Спасибо Lanshun Zhou. | |
| </para> | |
| <para lang="en"> | |
| memory leaks.<br/> | |
| Thanks to Lanshun Zhou. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве disable_symlinks. | |
| </para> | |
| <para lang="en"> | |
| in the "disable_symlinks" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании ZFS размер кэша на диске мог считаться некорректно; | |
| ошибка появилась в 1.0.1. | |
| </para> | |
| <para lang="en"> | |
| on ZFS filesystem disk cache size might be calculated incorrectly; | |
| the bug had appeared in 1.0.1. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался компилятором icc 12.1. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built by the icc 12.1 compiler. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался gcc на Solaris; | |
| ошибка появилась в 1.1.15. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built by gcc on Solaris; | |
| the bug had appeared in 1.1.15. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.1.15" date="2012-02-15"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива disable_symlinks. | |
| </para> | |
| <para lang="en"> | |
| the "disable_symlinks" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы proxy_cookie_domain и proxy_cookie_path. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_cookie_domain" and "proxy_cookie_path" directives. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx мог некорректно сообщать об ошибке "upstream prematurely closed | |
| connection" вместо "upstream sent too big header".<br/> | |
| Спасибо Feibo Li. | |
| </para> | |
| <para lang="en"> | |
| nginx might log incorrect error "upstream prematurely closed connection" | |
| instead of correct "upstream sent too big header" one.<br/> | |
| Thanks to Feibo Li. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался с модулем ngx_http_perl_module, | |
| если использовался параметр --with-openssl. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built with the ngx_http_perl_module | |
| if the --with-openssl option was used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| количество внутренних перенаправлений в именованные location'ы | |
| не ограничивалось. | |
| </para> | |
| <para lang="en"> | |
| the number of internal redirects to named locations was not limited. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| вызов $r->flush() несколько раз подряд мог приводить к ошибкам | |
| в модуле ngx_http_gzip_filter_module. | |
| </para> | |
| <para lang="en"> | |
| calling $r->flush() multiple times might cause errors | |
| in the ngx_http_gzip_filter_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы proxy_store с SSI-подзапросами | |
| временные файлы могли не удаляться. | |
| </para> | |
| <para lang="en"> | |
| temporary files might be not removed | |
| if the "proxy_store" directive was used with SSI includes. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в некоторых случаях некэшируемые переменные (такие, как $args) | |
| возвращали старое пустое закэшированное значение. | |
| </para> | |
| <para lang="en"> | |
| in some cases non-cacheable variables (such as the $args variable) | |
| returned old empty cached value. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если одновременно создавалось слишком много SSI-подзапросов; | |
| ошибка появилась в 0.7.25. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if too many SSI subrequests were issued simultaneously; | |
| the bug had appeared in 0.7.25. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.1.14" date="2012-01-30"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь можно указать несколько ограничений limit_req одновременно. | |
| </para> | |
| <para lang="en"> | |
| multiple "limit_req" limits may be used simultaneously. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в обработке ошибок при соединении с бэкендом.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| in error handling while connecting to a backend.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в обработке ошибок при использовании AIO на FreeBSD. | |
| </para> | |
| <para lang="en"> | |
| in AIO error handling on FreeBSD. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в инициализации библиотеки OpenSSL. | |
| </para> | |
| <para lang="en"> | |
| in the OpenSSL library initialization. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директивы proxy_redirect могли наследоваться некорректно. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_redirect" directives might be inherited incorrectly. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| утечки памяти при переконфигурации, если использовалась директива pcre_jit. | |
| </para> | |
| <para lang="en"> | |
| memory leak during reconfiguration if the "pcre_jit" directive was used. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.1.13" date="2012-01-16"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметры TLSv1.1 и TLSv1.2 в директиве ssl_protocols. | |
| </para> | |
| <para lang="en"> | |
| the "TLSv1.1" and "TLSv1.2" parameters of the "ssl_protocols" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| параметры директивы limit_req наследовались некорректно; | |
| ошибка появилась в 1.1.12. | |
| </para> | |
| <para lang="en"> | |
| the "limit_req" directive parameters were not inherited correctly; | |
| the bug had appeared in 1.1.12. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива proxy_redirect некорректно обрабатывала заголовок Refresh | |
| при использовании регулярных выражений. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_redirect" directive incorrectly processed "Refresh" header | |
| if regular expression were used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива proxy_cache_use_stale с параметром error не возвращала ответ из | |
| кэша, если все бэкенды были признаны неработающими. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_cache_use_stale" directive with "error" parameter did not return | |
| answer from cache if there were no live upstreams. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива worker_cpu_affinity могла не работать. | |
| </para> | |
| <para lang="en"> | |
| the "worker_cpu_affinity" directive might not work. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на Solaris; | |
| ошибка появилась в 1.1.12. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on Solaris; | |
| the bug had appeared in 1.1.12. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_mp4_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_mp4_module. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.1.12" date="2011-12-26"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| после перенаправления запроса с помощью директивы error_page | |
| директива proxy_pass без URI теперь использует изменённый URI.<br/> | |
| Спасибо Lanshun Zhou. | |
| </para> | |
| <para lang="en"> | |
| a "proxy_pass" directive without URI part now uses changed URI | |
| after redirection with the "error_page" directive.<br/> | |
| Thanks to Lanshun Zhou. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы proxy/fastcgi/scgi/uwsgi_cache_lock, | |
| proxy/fastcgi/scgi/uwsgi_cache_lock_timeout. | |
| </para> | |
| <para lang="en"> | |
| the "proxy/fastcgi/scgi/uwsgi_cache_lock", | |
| "proxy/fastcgi/scgi/uwsgi_cache_lock_timeout" directives. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива pcre_jit. | |
| </para> | |
| <para lang="en"> | |
| the "pcre_jit" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| SSI команда if поддерживает выделения в регулярных выражениях. | |
| </para> | |
| <para lang="en"> | |
| the "if" SSI command supports captures in regular expressions. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| SSI команда if не работала внутри команды block. | |
| </para> | |
| <para lang="en"> | |
| the "if" SSI command did not work inside the "block" command. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директивы limit_conn_log_level и limit_req_log_level могли не работать. | |
| </para> | |
| <para lang="en"> | |
| the "limit_conn_log_level" and "limit_req_log_level" directives might not work. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива limit_rate не позволяла передавать на полной скорости, | |
| даже если был указан очень большой лимит. | |
| </para> | |
| <para lang="en"> | |
| the "limit_rate" directive did not allow to use full throughput, | |
| even if limit value was very high. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива sendfile_max_chunk не работала, | |
| если использовалась директива limit_rate. | |
| </para> | |
| <para lang="en"> | |
| the "sendfile_max_chunk" directive did not work, | |
| if the "limit_rate" directive was used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если в директиве proxy_pass использовались переменные и не был указан URI, | |
| всегда использовался URI исходного запроса. | |
| </para> | |
| <para lang="en"> | |
| a "proxy_pass" directive without URI part always used original request URI | |
| if variables were used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| после перенаправления запроса с помощью директивы try_files | |
| директива proxy_pass без URI могла использовать URI исходного запроса.<br/> | |
| Спасибо Lanshun Zhou. | |
| </para> | |
| <para lang="en"> | |
| a "proxy_pass" directive without URI part might use original request | |
| after redirection with the "try_files" directive.<br/> | |
| Thanks to Lanshun Zhou. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_scgi_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_scgi_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_mp4_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_mp4_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на Solaris; | |
| ошибка появилась в 1.1.9. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on Solaris; | |
| the bug had appeared in 1.1.9. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.1.11" date="2011-12-12"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр so_keepalive в директиве listen.<br/> | |
| Спасибо Всеволоду Стахову. | |
| </para> | |
| <para lang="en"> | |
| the "so_keepalive" parameter of the "listen" directive.<br/> | |
| Thanks to Vsevolod Stakhov. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр if_not_empty в директивах fastcgi/scgi/uwsgi_param. | |
| </para> | |
| <para lang="en"> | |
| the "if_not_empty" parameter of the "fastcgi/scgi/uwsgi_param" directives. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $https. | |
| </para> | |
| <para lang="en"> | |
| the $https variable. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива proxy_redirect поддерживает переменные в первом параметре. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_redirect" directive supports variables in the first parameter. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива proxy_redirect поддерживает регулярные выражения. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_redirect" directive supports regular expressions. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| переменная $sent_http_cache_control могла содержать неверное значение при | |
| использовании директивы expires.<br/> | |
| Спасибо Yichun Zhang. | |
| </para> | |
| <para lang="en"> | |
| the $sent_http_cache_control variable might contain a wrong value if the | |
| "expires" directive was used.<br/> | |
| Thanks to Yichun Zhang. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива read_ahead могла не работать при использовании совместно с | |
| try_files и open_file_cache. | |
| </para> | |
| <para lang="en"> | |
| the "read_ahead" directive might not work combined with "try_files" | |
| and "open_file_cache". | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если в параметре inactive директивы proxy_cache_path | |
| было указано малое время, | |
| в рабочем процессе мог произойти segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if small time was used in the "inactive" parameter of | |
| the "proxy_cache_path" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ответы из кэша могли зависать. | |
| </para> | |
| <para lang="en"> | |
| responses from cache might hang. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.1.10" date="2011-11-30"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании AIO на Linux в рабочем процессе происходил segmentation fault; | |
| ошибка появилась в 1.1.9. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault occurred in a worker process if AIO was used on Linux; | |
| the bug had appeared in 1.1.9. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.1.9" date="2011-11-28"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь двойные кавычки экранируется при выводе SSI-командой echo.<br/> | |
| Спасибо Зауру Абасмирзоеву. | |
| </para> | |
| <para lang="en"> | |
| now double quotes are encoded in an "echo" SSI-command output.<br/> | |
| Thanks to Zaur Abasmirzoev. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр valid в директиве resolver. По умолчанию теперь | |
| используется TTL, возвращённый DNS-сервером.<br/> | |
| Спасибо Кириллу Коринскому. | |
| </para> | |
| <para lang="en"> | |
| the "valid" parameter of the "resolver" directive. By default TTL | |
| returned by a DNS server is used.<br/> | |
| Thanks to Kirill A. Korinskiy. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx мог перестать отвечать, если рабочий процесс завершался аварийно. | |
| </para> | |
| <para lang="en"> | |
| nginx might hang after a worker process abnormal termination. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если использовалось SNI; | |
| ошибка появилась в 1.1.2. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if SNI was used; | |
| the bug had appeared in 1.1.2. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве keepalive_disable; | |
| ошибка появилась в 1.1.8.<br/> | |
| Спасибо Александру Усову. | |
| </para> | |
| <para lang="en"> | |
| in the "keepalive_disable" directive; | |
| the bug had appeared in 1.1.8.<br/> | |
| Thanks to Alexander Usov. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| сигнал SIGWINCH переставал работать после первого обновления исполняемого | |
| файла; | |
| ошибка появилась в 1.1.1. | |
| </para> | |
| <para lang="en"> | |
| SIGWINCH signal did not work after first binary upgrade; | |
| the bug had appeared in 1.1.1. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| теперь ответы бэкендов, длина которых не соответствует заголовку | |
| Content-Length, не кэширутся. | |
| </para> | |
| <para lang="en"> | |
| backend responses with length not matching "Content-Length" header line | |
| are no longer cached. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве scgi_param при использовании составных параметров. | |
| </para> | |
| <para lang="en"> | |
| in the "scgi_param" directive, if complex parameters were used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в методе epoll.<br/> | |
| Спасибо Yichun Zhang. | |
| </para> | |
| <para lang="en"> | |
| in the "epoll" event method.<br/> | |
| Thanks to Yichun Zhang. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_flv_module.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_flv_module.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_mp4_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_mp4_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| теперь nginx понимает IPv6-адреса в строке запроса и в заголовке Host. | |
| </para> | |
| <para lang="en"> | |
| IPv6 addresses are now handled properly in a request line and in a "Host" | |
| request header line. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директивы add_header и expires не работали для ответов с кодом 206, | |
| если запрос проксировался. | |
| </para> | |
| <para lang="en"> | |
| "add_header" and "expires" directives did not work if a request was proxied | |
| and response status code was 206. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на FreeBSD 10. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on FreeBSD 10. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на AIX. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on AIX. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.1.8" date="2011-11-14"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| модуль ngx_http_limit_zone_module переименован в ngx_http_limit_conn_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_limit_zone_module was renamed to the ngx_http_limit_conn_module. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| директива limit_zone заменена директивой limit_conn_zone с новым синтаксисом. | |
| </para> | |
| <para lang="en"> | |
| the "limit_zone" directive was superseded by the "limit_conn_zone" directive | |
| with a new syntax. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка ограничения по нескольким limit_conn на одном уровне. | |
| </para> | |
| <para lang="en"> | |
| support for multiple "limit_conn" limits on the same level. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива image_filter_sharpen. | |
| </para> | |
| <para lang="en"> | |
| the "image_filter_sharpen" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если resolver получил большой DNS-ответ.<br/> | |
| Спасибо Ben Hawkes. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if resolver got a big DNS response.<br/> | |
| Thanks to Ben Hawkes. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в вычислении ключа для кэширования, | |
| если использовалась внутренняя реализация MD5; | |
| ошибка появилась в 1.0.4. | |
| </para> | |
| <para lang="en"> | |
| in cache key calculation | |
| if internal MD5 implementation was used; | |
| the bug had appeared in 1.0.4. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| строки "If-Modified-Since", "If-Range" и им подобные в заголовке запроса | |
| клиента могли передаваться бэкенду при кэшировании; или не передаваться при | |
| выключенном кэшировании, если кэширование было включено в другой части | |
| конфигурации. | |
| </para> | |
| <para lang="en"> | |
| the "If-Modified-Since", "If-Range", etc. client request header lines | |
| might be passed to backend while caching; or not passed without caching | |
| if caching was enabled in another part of the configuration. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_mp4_module выдавал неверную строку "Content-Length" | |
| в заголовке ответа, использовался аргумент start.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| the module ngx_http_mp4_module sent incorrect "Content-Length" response | |
| header line if the "start" argument was used.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.1.7" date="2011-10-31"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка нескольких DNS серверов в директиве "resolver".<br/> | |
| Спасибо Кириллу Коринскому. | |
| </para> | |
| <para lang="en"> | |
| support of several DNS servers in the "resolver" directive.<br/> | |
| Thanks to Kirill A. Korinskiy. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| на старте или во время переконфигурации происходил segmentation fault, | |
| если директива ssl использовалась на уровне http и не был указан | |
| ssl_certificate. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault occurred on start or during reconfiguration | |
| if the "ssl" directive was used at http level and there was | |
| no "ssl_certificate" defined. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| уменьшено потребление памяти при проксировании больших файлов, | |
| если они буферизировались на диск. | |
| </para> | |
| <para lang="en"> | |
| reduced memory consumption while proxying big files | |
| if they were buffered to disk. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если использовалась директива "proxy_http_version 1.1". | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if "proxy_http_version 1.1" directive was used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве "expires @time". | |
| </para> | |
| <para lang="en"> | |
| in the "expires @time" directive. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.1.6" date="2011-10-17"> | |
| <change> | |
| <para lang="ru"> | |
| Изменение во внутреннем API: теперь при внутреннем редиректе | |
| в именованный location контексты модулей очищаются.<br/> | |
| По запросу Yichun Zhang. | |
| </para> | |
| <para lang="en"> | |
| Change in internal API: now module context data are cleared | |
| while internal redirect to named location.<br/> | |
| Requested by Yichun Zhang. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь если сервер, описанный в блоке upstream, был признан неработающим, | |
| то после истечения fail_timeout на него будет отправлен только один запрос; | |
| сервер будет считаться работающим, если успешно ответит на этот запрос. | |
| </para> | |
| <para lang="en"> | |
| if a server in an upstream failed, only one request will be sent to it | |
| after fail_timeout; the server will be considered alive if it will | |
| successfully respond to the request. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь символы 0x7F-0xFF в access_log записываются в виде \xXX. | |
| </para> | |
| <para lang="en"> | |
| now the 0x7F-0xFF characters are escaped as \xXX in an access_log. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы "proxy/fastcgi/scgi/uwsgi_ignore_headers" теперь поддерживают | |
| значения X-Accel-Limit-Rate, X-Accel-Buffering и X-Accel-Charset. | |
| </para> | |
| <para lang="en"> | |
| "proxy/fastcgi/scgi/uwsgi_ignore_headers" directives support the following | |
| additional values: X-Accel-Limit-Rate, X-Accel-Buffering, X-Accel-Charset. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| уменьшение потребления памяти при использовании SSL. | |
| </para> | |
| <para lang="en"> | |
| decrease of memory consumption if SSL is used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| некоторые UTF-8 символы обрабатывались неправильно.<br/> | |
| Спасибо Алексею Куцу. | |
| </para> | |
| <para lang="en"> | |
| some UTF-8 characters were processed incorrectly.<br/> | |
| Thanks to Alexey Kuts. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директивы модуля ngx_http_rewrite_module, заданные на уровне server, | |
| применялись повторно, если для запроса не находилось ни одного location'а. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_rewrite_module directives specified at "server" level were | |
| executed twice if no matching locations were defined. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании "aio sendfile" могла происходить утечка сокетов. | |
| </para> | |
| <para lang="en"> | |
| a socket leak might occurred if "aio sendfile" was used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании файлового AIO соединения с быстрыми клиентами | |
| могли быть закрыты по истечению send_timeout. | |
| </para> | |
| <para lang="en"> | |
| connections with fast clients might be closed after send_timeout | |
| if file AIO was used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_autoindex_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_autoindex_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_mp4_module не поддерживал перемотку на 32-битных платформах. | |
| </para> | |
| <para lang="en"> | |
| the module ngx_http_mp4_module did not support seeking on 32-bit platforms. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.1.5" date="2011-10-05"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы uwsgi_buffering и scgi_buffering.<br/> | |
| Спасибо Peter Smit. | |
| </para> | |
| <para lang="en"> | |
| the "uwsgi_buffering" and "scgi_buffering" directives.<br/> | |
| Thanks to Peter Smit. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании proxy_cache_bypass могли быть закэшированы | |
| некэшируемые ответы.<br/> | |
| Спасибо John Ferlito. | |
| </para> | |
| <para lang="en"> | |
| non-cacheable responses might be cached if "proxy_cache_bypass" directive | |
| was used.<br/> | |
| Thanks to John Ferlito. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_proxy_module при работе с бэкендами по HTTP/1.1. | |
| </para> | |
| <para lang="en"> | |
| in HTTP/1.1 support in the ngx_http_proxy_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| закэшированные ответы с пустым телом возвращались некорректно; | |
| ошибка появилась в 0.8.31. | |
| </para> | |
| <para lang="en"> | |
| cached responses with an empty body were returned incorrectly; | |
| the bug had appeared in 0.8.31. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ответы с кодом 201 модуля ngx_http_dav_module были некорректны; | |
| ошибка появилась в 0.8.32. | |
| </para> | |
| <para lang="en"> | |
| 201 responses of the ngx_http_dav_module were incorrect; | |
| the bug had appeared in 0.8.32. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве return. | |
| </para> | |
| <para lang="en"> | |
| in the "return" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы "ssl_session_cache builtin" происходил | |
| segmentation fault; | |
| ошибка появилась в 1.1.1. | |
| </para> | |
| <para lang="en"> | |
| the "ssl_session_cache builtin" directive caused segmentation fault; | |
| the bug had appeared in 1.1.1. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.1.4" date="2011-09-20"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_upstream_keepalive. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_upstream_keepalive module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива proxy_http_version. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_http_version" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива fastcgi_keep_conn. | |
| </para> | |
| <para lang="en"> | |
| the "fastcgi_keep_conn" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива worker_aio_requests. | |
| </para> | |
| <para lang="en"> | |
| the "worker_aio_requests" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если nginx был собран с файловым AIO, | |
| он не мог запускаться на Linux без поддержки AIO. | |
| </para> | |
| <para lang="en"> | |
| if nginx was built --with-file-aio it could not be run on Linux | |
| kernel which did not support AIO. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в обработке ошибок при работе с Linux AIO. | |
| <br/> | |
| Спасибо Hagai Avrahami. | |
| </para> | |
| <para lang="en"> | |
| in Linux AIO error processing. | |
| <br/> | |
| Thanks to Hagai Avrahami. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| уменьшено потребление памяти для долгоживущих запросов. | |
| </para> | |
| <para lang="en"> | |
| reduced memory consumption for long-lived requests. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_mp4_module не поддерживал 64-битный MP4-атом co64. | |
| </para> | |
| <para lang="en"> | |
| the module ngx_http_mp4_module did not support 64-bit MP4 "co64" atom. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.1.3" date="2011-09-14"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_mp4_module. | |
| </para> | |
| <para lang="en"> | |
| the module ngx_http_mp4_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в Linux AIO, используемым совместно с open_file_cache. | |
| </para> | |
| <para lang="en"> | |
| in Linux AIO combined with open_file_cache. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| open_file_cache не обновлял информацию о файле, | |
| если файл был изменён не атомарно. | |
| </para> | |
| <para lang="en"> | |
| open_file_cache did not update file info on retest | |
| if file was not atomically changed. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на MacOSX 10.7. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on MacOSX 10.7. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.1.2" date="2011-09-05"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь, если суммарный размер всех диапазонов больше размера исходного ответа, | |
| то nginx возвращает только исходный ответ, не обрабатывая диапазоны. | |
| </para> | |
| <para lang="en"> | |
| now if total size of all ranges is greater than source response size, | |
| then nginx disables ranges and returns just the source response. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива max_ranges. | |
| </para> | |
| <para lang="en"> | |
| the "max_ranges" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директивы ssl_verify_client, ssl_verify_depth и ssl_prefer_server_cipher | |
| могли работать некорректно, если использовался SNI. | |
| </para> | |
| <para lang="en"> | |
| the "ssl_verify_client", "ssl_verify_depth", and "ssl_prefer_server_ciphers" | |
| directives might work incorrectly if SNI was used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директивах proxy/fastcgi/scgi/ uwsgi_ignore_client_abort. | |
| </para> | |
| <para lang="en"> | |
| in the "proxy/fastcgi/scgi/uwsgi_ignore_client_abort" directives. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.1.1" date="2011-08-22"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь загрузчик кэша за каждую итерацию либо обрабатывает число файлов, | |
| указанное в параметре load_files, либо работает не дольше времени, | |
| указанного в параметре loader_threshold. | |
| </para> | |
| <para lang="en"> | |
| now cache loader processes either as many files as specified by "loader_files" | |
| parameter or works no longer than time specified by the "loader_threshold" | |
| parameter during each iteration. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| SIGWINCH сигнал теперь работает только в режиме демона. | |
| </para> | |
| <para lang="en"> | |
| now SIGWINCH signal works only in daemon mode. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь разделяемые зоны и кэши используют семафоры POSIX на Solaris.<br/> | |
| Спасибо Денису Иванову. | |
| </para> | |
| <para lang="en"> | |
| now shared zones and caches use POSIX semaphores on Solaris.<br/> | |
| Thanks to Den Ivanov. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь на NetBSD поддерживаются accept фильтры. | |
| </para> | |
| <para lang="en"> | |
| accept filters are now supported on NetBSD. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на Linux 3.0. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on Linux 3.0. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в некоторых случаях nginx не использовал сжатие; | |
| ошибка появилась в 1.1.0. | |
| </para> | |
| <para lang="en"> | |
| nginx did not use gzipping in some cases; | |
| the bug had appeared in 1.1.0. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| обработка тела запроса могла быть неверной, если клиент использовал pipelining. | |
| </para> | |
| <para lang="en"> | |
| request body might be processed incorrectly if client used pipelining. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве request_body_in_single_buf. | |
| </para> | |
| <para lang="en"> | |
| in the "request_body_in_single_buf" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директивах proxy_set_body и proxy_pass_request_body | |
| при использовании SSL-соединения с бэкендом. | |
| </para> | |
| <para lang="en"> | |
| in "proxy_set_body" and "proxy_pass_request_body" directives | |
| if SSL connection to backend was used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx нагружал процессор, если все серверы в upstream'е были помечены | |
| флагом down. | |
| </para> | |
| <para lang="en"> | |
| nginx hogged CPU if all servers in an upstream were marked as "down". | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при переконфигурации мог произойти segmentation fault, | |
| если в предыдущей конфигурации был определён, но не использовался | |
| ssl_session_cache. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur during reconfiguration | |
| if ssl_session_cache was defined but not used in previous configuration. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании большого количества backup-серверов | |
| в рабочем процессе мог произойти segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if many backup servers were used in an upstream. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директив fastcgi/scgi/uwsgi_param | |
| со значениями, начинающимися со строки "HTTP_", | |
| в рабочем процессе мог произойти segmentation fault; | |
| ошибка появилась в 0.8.40. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| if "fastcgi/scgi/uwsgi_param" directives were used | |
| with values starting with "HTTP_"; | |
| the bug had appeared in 0.8.40. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.1.0" date="2011-08-01"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| уменьшение времени работы загрузчика кэша. | |
| </para> | |
| <para lang="en"> | |
| cache loader run time decrease. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметры loader_files, loader_sleep и loader_threshold | |
| директив proxy/fastcgi/scgi/uwsgi_cache_path. | |
| </para> | |
| <para lang="en"> | |
| "loader_files", "loader_sleep", and "loader_threshold" options | |
| of the "proxy/fastcgi/scgi/uwsgi_cache_path" directives. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| уменьшение времени загрузки конфигураций с большим количеством HTTPS серверов. | |
| </para> | |
| <para lang="en"> | |
| loading time decrease of configuration with large number of HTTPS sites. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь nginx поддерживает шифры с обменом ECDHE-ключами.<br/> | |
| Спасибо Adrian Kotelba. | |
| </para> | |
| <para lang="en"> | |
| now nginx supports ECDHE key exchange ciphers.<br/> | |
| Thanks to Adrian Kotelba. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива lingering_close.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| the "lingering_close" directive.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| закрытия соединения для pipelined-запросов.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| in closing connection for pipelined requests.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не запрещал сжатие при получении значения "gzip;q=0" | |
| в строке "Accept-Encoding" в заголовке запроса клиента. | |
| </para> | |
| <para lang="en"> | |
| nginx did not disable gzipping if client sent "gzip;q=0" in | |
| "Accept-Encoding" request header line. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| таймаута при небуферизированном проксировании.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| in timeout in unbuffered proxied mode.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| утечки памяти при использовании переменных в директиве proxy_pass | |
| при работе с бэкендом по HTTPS.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| memory leaks when a "proxy_pass" directive contains variables and proxies | |
| to an HTTPS backend.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в проверке параметра директивы proxy_pass, заданного переменными.<br/> | |
| Спасибо Lanshun Zhou. | |
| </para> | |
| <para lang="en"> | |
| in parameter validation of a "proxy_pass" directive with variables.<br/> | |
| Thanks to Lanshun Zhou. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| SSL не работал на QNX.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| SSL did not work on QNX.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| SSL модули не собирались gcc 4.6 без параметра --with-debug. | |
| </para> | |
| <para lang="en"> | |
| SSL modules could not be built by gcc 4.6 without --with-debug option. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.0.5" date="2011-07-19"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь по умолчанию используются следующие шифры SSL: "HIGH:!aNULL:!MD5".<br/> | |
| Спасибо Rob Stradling. | |
| </para> | |
| <para lang="en"> | |
| now default SSL ciphers are "HIGH:!aNULL:!MD5".<br/> | |
| Thanks to Rob Stradling. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы referer_hash_max_size и referer_hash_bucket_size.<br/> | |
| Спасибо Witold Filipczyk. | |
| </para> | |
| <para lang="en"> | |
| the "referer_hash_max_size" and "referer_hash_bucket_size" | |
| directives.<br/> | |
| Thanks to Witold Filipczyk. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $uid_reset. | |
| </para> | |
| <para lang="en"> | |
| $uid_reset variable. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании кэширования | |
| в рабочем процессе мог произойти segmentation fault.<br/> | |
| Спасибо Lanshun Zhou. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process, | |
| if a caching was used.<br/> | |
| Thanks to Lanshun Zhou. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании кэширования рабочие процессы | |
| могли зациклиться во время переконфигурации; | |
| ошибка появилась в 0.8.48.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| worker processes may got caught in an endless loop during reconfiguration, | |
| if a caching was used; | |
| the bug had appeared in 0.8.48.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| сообщения "stalled cache updating".<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| "stalled cache updating" alert.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.0.4" date="2011-06-01"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь в регулярных выражениях в директиве map можно задать | |
| чувствительность к регистру с помощью префиксов "~" и "~*". | |
| </para> | |
| <para lang="en"> | |
| now regular expressions case sensitivity in the "map" directive | |
| is given by prefixes "~" or "~*". | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь разделяемые зоны и кэши используют семафоры POSIX на Linux.<br/> | |
| Спасибо Денису Латыпову. | |
| </para> | |
| <para lang="en"> | |
| now shared zones and caches use POSIX semaphores on Linux.<br/> | |
| Thanks to Denis F. Latypoff. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| сообщения "stalled cache updating". | |
| </para> | |
| <para lang="en"> | |
| "stalled cache updating" alert. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался с параметром --without-http_auth_basic_module; | |
| ошибка появилась в 1.0.3. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built --without-http_auth_basic_module; | |
| the bug had appeared in 1.0.3. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.0.3" date="2011-05-25"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива auth_basic_user_file поддерживает шифрование пароля | |
| методами "$apr1", "{PLAIN}" и "{SSHA}".<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| the "auth_basic_user_file" directive supports "$apr1", "{PLAIN}", | |
| and "{SSHA}" password encryption methods.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива geoip_org и переменная $geoip_org.<br/> | |
| Спасибо Александру Ускову, Arnaud Granal и Денису Латыпову. | |
| </para> | |
| <para lang="en"> | |
| the "geoip_org" directive and $geoip_org variable.<br/> | |
| Thanks to Alexander Uskov, Arnaud Granal, and Denis F. Latypoff. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модули ngx_http_geo_module и ngx_http_geoip_module поддерживают | |
| адреса IPv4, отображённые на IPv6 адреса. | |
| </para> | |
| <para lang="en"> | |
| ngx_http_geo_module and ngx_http_geoip_module support IPv4 addresses | |
| mapped to IPv6 addresses. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при проверке адреса IPv4, отображённого на адрес IPv6, | |
| в рабочем процессе происходил segmentation fault, | |
| если директивы access или deny были определены только для адресов IPv6; | |
| ошибка появилась в 0.8.22. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault occurred in a worker process | |
| during testing IPv4 address mapped to IPv6 address, | |
| if access or deny rules were defined only for IPv6; | |
| the bug had appeared in 0.8.22. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| закэшированный ответ мог быть испорчен, если значения директив | |
| proxy/fastcgi/scgi/uwsgi_cache_bypass и proxy/fastcgi/scgi/ uwsgi_no_cache | |
| были разными; | |
| ошибка появилась в 0.8.46. | |
| </para> | |
| <para lang="en"> | |
| a cached response may be broken if "proxy/fastcgi/scgi/ uwsgi_cache_bypass" | |
| and "proxy/fastcgi/scgi/uwsgi_no_cache" directive values were different; | |
| the bug had appeared in 0.8.46. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.0.2" date="2011-05-10"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь разделяемые зоны и кэши используют семафоры POSIX. | |
| </para> | |
| <para lang="en"> | |
| now shared zones and caches use POSIX semaphores. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в работе параметра rotate директивы image_filter.<br/> | |
| Спасибо Adam Bocim. | |
| </para> | |
| <para lang="en"> | |
| in the "rotate" parameter of the "image_filter" directive.<br/> | |
| Thanks to Adam Bocim. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на Solaris; | |
| ошибка появилась в 1.0.1. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on Solaris; | |
| the bug had appeared in 1.0.1. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.0.1" date="2011-05-03"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь директива split_clients использует алгоритм MurmurHash2 из-за | |
| лучшего распределения.<br/> | |
| Спасибо Олегу Мамонтову. | |
| </para> | |
| <para lang="en"> | |
| now the "split_clients" directive uses MurmurHash2 algorithm because | |
| of better distribution.<br/> | |
| Thanks to Oleg Mamontov. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь длинные строки, начинающиеся с нуля, не считаются ложными | |
| значениями.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| now long strings starting with zero are not considered as false values.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь по умолчанию nginx использует значение 511 для listen backlog на Linux. | |
| </para> | |
| <para lang="en"> | |
| now nginx uses a default listen backlog value 511 on Linux. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменные $upstream_... можно использовать в SSI и перловом модулях. | |
| </para> | |
| <para lang="en"> | |
| the $upstream_... variables may be used in the SSI and perl modules. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| теперь nginx лучше ограничивает размер кэша на диске.<br/> | |
| Спасибо Олегу Мамонтову. | |
| </para> | |
| <para lang="en"> | |
| now nginx limits better disk cache size.<br/> | |
| Thanks to Oleg Mamontov. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при парсинге неправильного IPv4 адреса мог произойти segmentation fault; | |
| ошибка появилась в 0.8.22.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur while parsing incorrect IPv4 address; | |
| the bug had appeared in 0.9.3.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался gcc 4.6 без параметра --with-debug. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built by gcc 4.6 without --with-debug option. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на Solaris 9 и более ранних; | |
| ошибка появилась в 0.9.3.<br/> | |
| Спасибо Dagobert Michelsen. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on Solaris 9 and earlier; | |
| the bug had appeared in 0.9.3.<br/> | |
| Thanks to Dagobert Michelsen. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| переменная $request_time имела неверные значения, если использовались | |
| подзапросы; | |
| ошибка появилась в 0.8.47.<br/> | |
| Спасибо Игорю А. Валькову. | |
| </para> | |
| <para lang="en"> | |
| $request_time variable had invalid values if subrequests were used; | |
| the bug had appeared in 0.8.47.<br/> | |
| Thanks to Igor A. Valcov. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="1.0.0" date="2011-04-12"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| cache manager мог нагружать процессор после переконфигурации.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| a cache manager might hog CPU after reload.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива "image_filter crop" неправильно работала в сочетании с | |
| "image_filter rotate 180". | |
| </para> | |
| <para lang="en"> | |
| an "image_filter crop" directive worked incorrectly coupled with | |
| an "image_filter rotate 180" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива "satisfy any" запрещала выдачу пользовательской страницы | |
| для 401 кода. | |
| </para> | |
| <para lang="en"> | |
| a "satisfy any" directive disabled custom 401 error page. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.9.7" date="2011-04-04"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь соединения в состоянии keepalive могут быть закрыты преждевременно, | |
| если у воркера нет свободных соединений.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| now keepalive connections may be closed premature, | |
| if there are no free worker connections.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр rotate директивы image_filter.<br/> | |
| Спасибо Adam Bocim. | |
| </para> | |
| <para lang="en"> | |
| the "rotate" parameter of the "image_filter" directive.<br/> | |
| Thanks to Adam Bocim. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ситуации, когда бэкенд в директивах fastcgi_pass, scgi_pass или uwsgi_pass | |
| задан выражением и ссылается на описанный upstream. | |
| </para> | |
| <para lang="en"> | |
| a case when a backend in "fastcgi_pass", "scgi_pass", or "uwsgi_pass" | |
| directives is given by expression and refers to a defined upstream. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.9.6" date="2011-03-21"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива map поддерживает регулярные выражения в качестве значения | |
| первого параметра. | |
| </para> | |
| <para lang="en"> | |
| the "map" directive supports regular expressions as value of the first | |
| parameter. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $time_iso8601 для access_log.<br/> | |
| Спасибо Michael Lustfield. | |
| </para> | |
| <para lang="en"> | |
| $time_iso8601 access_log variable.<br/> | |
| Thanks to Michael Lustfield. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.9.5" date="2011-02-21"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь по умолчанию nginx использует значение -1 для listen backlog | |
| на Linux.<br/> | |
| Спасибо Андрею Нигматулину. | |
| </para> | |
| <para lang="en"> | |
| now nginx uses a default listen backlog value -1 on Linux.<br/> | |
| Thanks to Andrei Nigmatulin. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр utf8 в директивах geoip_country и geoip_city.<br/> | |
| Спасибо Денису Латыпову. | |
| </para> | |
| <para lang="en"> | |
| the "utf8" parameter of "geoip_country" and "geoip_city" directives.<br/> | |
| Thanks to Denis F. Latypoff. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| исправление в умолчательной директиве proxy_redirect, если в директиве | |
| proxy_pass не был описан URI.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| in a default "proxy_redirect" directive if "proxy_pass" directive has no | |
| URI part.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива error_page не работала с нестандартными кодами ошибок; | |
| ошибка появилась в 0.8.53.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| an "error_page" directive did not work with nonstandard error codes; | |
| the bug had appeared in 0.8.53.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.9.4" date="2011-01-21"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива server_name поддерживает переменную $hostname. | |
| </para> | |
| <para lang="en"> | |
| the "server_name" directive supports the $hostname variable. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| 494 код для ошибки "Request Header Too Large". | |
| </para> | |
| <para lang="en"> | |
| 494 code for "Request Header Too Large" error. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.9.3" date="2010-12-13"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если для пары IPv6-адрес:порт описан только один сервер, то выделения | |
| в регулярных выражениях в директиве server_name не работали. | |
| </para> | |
| <para lang="en"> | |
| if there was a single server for given IPv6 address:port pair, | |
| then captures in regular expressions in a "server_name" directive did not work. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался под Solaris; | |
| ошибка появилась в 0.9.0. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on Solaris; | |
| the bug had appeared in 0.9.0. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.9.2" date="2010-12-06"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка строки "If-Unmodified-Since" в заголовке запроса клиента. | |
| </para> | |
| <para lang="en"> | |
| the "If-Unmodified-Since" client request header line support. | |
| </para> | |
| </change> | |
| <change type="workaround"> | |
| <para lang="ru"> | |
| использование accept(), если accept4() не реализован; | |
| ошибка появилась в 0.9.0. | |
| </para> | |
| <para lang="en"> | |
| fallback to accept() syscall if accept4() was not implemented; | |
| the issue had appeared in 0.9.0. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался под Cygwin; | |
| ошибка появилась в 0.9.0. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on Cygwin; | |
| the bug had appeared in 0.9.0. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| уязвимости в OpenSSL CVE-2010-4180.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| for OpenSSL vulnerability CVE-2010-4180.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.9.1" date="2010-11-30"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директивы вида "return CODE message" не работали; | |
| ошибка появилась в 0.9.0. | |
| </para> | |
| <para lang="en"> | |
| "return CODE message" directives did not work; | |
| the bug had appeared in 0.9.0. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.9.0" date="2010-11-29"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива keepalive_disable. | |
| </para> | |
| <para lang="en"> | |
| the "keepalive_disable" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива map поддерживает переменные в качестве значения определяемой | |
| переменной. | |
| </para> | |
| <para lang="en"> | |
| the "map" directive supports variables as value of a defined variable. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива map поддерживает пустые строки в качестве значения первого параметра. | |
| </para> | |
| <para lang="en"> | |
| the "map" directive supports empty strings as value of the first parameter. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива map поддерживает выражения в первом параметре. | |
| </para> | |
| <para lang="en"> | |
| the "map" directive supports expressions as the first parameter. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| страница руководства nginx(8).<br/> | |
| Спасибо Сергею Осокину. | |
| </para> | |
| <para lang="en"> | |
| nginx(8) manual page.<br/> | |
| Thanks to Sergey Osokin. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка accept4() в Linux.<br/> | |
| Спасибо Simon Liu. | |
| </para> | |
| <para lang="en"> | |
| Linux accept4() support.<br/> | |
| Thanks to Simon Liu. | |
| </para> | |
| </change> | |
| <change type="workaround"> | |
| <para lang="ru"> | |
| устранение предупреждения линкера о "sys_errlist" и "sys_nerr" под Linux; | |
| предупреждение появилось в 0.8.35. | |
| </para> | |
| <para lang="en"> | |
| elimination of Linux linker warning about "sys_errlist" and "sys_nerr"; | |
| the warning had appeared in 0.8.35. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы auth_basic | |
| в рабочем процессе мог произойти segmentation fault.<br/> | |
| Спасибо Михаилу Лалетину. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process, | |
| if the "auth_basic" directive was used.<br/> | |
| Thanks to Michail Laletin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| совместимость с модулем ngx_http_eval_module; | |
| ошибка появилась в 0.8.42. | |
| </para> | |
| <para lang="en"> | |
| compatibility with ngx_http_eval_module; | |
| the bug had appeared in 0.8.42. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.53" date="2010-10-18"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь директива error_page позволяет менять код статуса у редиректа. | |
| </para> | |
| <para lang="en"> | |
| now the "error_page" directive allows to change a status code in a redirect. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива gzip_disable поддерживает специальную маску degradation. | |
| </para> | |
| <para lang="en"> | |
| the "gzip_disable" directive supports special "degradation" mask. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании файлового AIO могла происходить утечка сокетов.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| a socket leak might occurred if file AIO was used.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если в первом сервере не была описана директива listen и нигде явно | |
| не описан сервер по умолчанию, то сервером по умолчанию становился | |
| следующий сервер с директивой listen; | |
| ошибка появилась в 0.8.21. | |
| </para> | |
| <para lang="en"> | |
| if the first server had no "listen" directive and there was no explicit | |
| default server, then a next server with a "listen" directive became | |
| the default server; | |
| the bug had appeared in 0.8.21. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.52" date="2010-09-28"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx использовал режим SSL для listen сокета, если для него был | |
| установлен любой listen-параметр; | |
| ошибка появилась в 0.8.51. | |
| </para> | |
| <para lang="en"> | |
| nginx used SSL mode for a listen socket if any listen option was set; | |
| the bug had appeared in 0.8.51. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.51" date="2010-09-27"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| директива secure_link_expires упразднена. | |
| </para> | |
| <para lang="en"> | |
| the "secure_link_expires" directive has been canceled. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| уровень логгирования ошибок resolver'а понижен с уровня alert на error. | |
| </para> | |
| <para lang="en"> | |
| a logging level of resolver errors has been lowered from "alert" to "error". | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь параметр "ssl" listen-сокета можно устанавливать несколько раз. | |
| </para> | |
| <para lang="en"> | |
| now a listen socket "ssl" parameter may be set several times. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.50" date="2010-09-02"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы secure_link, secure_link_md5 и secure_link_expires | |
| модуля ngx_http_secure_link_module. | |
| </para> | |
| <para lang="en"> | |
| the "secure_link", "secure_link_md5", and "secure_link_expires" directives of | |
| the ngx_http_secure_link_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| ключ -q.<br/> | |
| Спасибо Геннадию Махомеду. | |
| </para> | |
| <para lang="en"> | |
| the -q switch.<br/> | |
| Thanks to Gena Makhomed. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании кэширования рабочие процессы и могли зациклиться | |
| во время переконфигурации; | |
| ошибка появилась в 0.8.48. | |
| </para> | |
| <para lang="en"> | |
| worker processes may got caught in an endless loop during reconfiguration, | |
| if a caching was used; | |
| the bug had appeared in 0.8.48. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве gzip_disable.<br/> | |
| Спасибо Derrick Petzold. | |
| </para> | |
| <para lang="en"> | |
| in the "gzip_disable" directive.<br/> | |
| Thanks to Derrick Petzold. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx/Windows не мог посылать сигналы stop, quit, reopen, reload процессу, | |
| запущенному в другой сессии. | |
| </para> | |
| <para lang="en"> | |
| nginx/Windows could not send stop, quit, reopen, and reload signals | |
| to a process run in other session. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.49" date="2010-08-09"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива image_filter_jpeg_quality поддерживает переменные. | |
| </para> | |
| <para lang="en"> | |
| the "image_filter_jpeg_quality" directive supports variables. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании переменной $geoip_region_name | |
| в рабочем процессе мог произойти segmentation fault; | |
| ошибка появилась в 0.8.48. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process, | |
| if the $geoip_region_name variables was used; | |
| the bug had appeared in 0.8.48. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки, перехваченные error_page, кэшировались только до следующего запроса; | |
| ошибка появилась в 0.8.48. | |
| </para> | |
| <para lang="en"> | |
| errors intercepted by error_page were cached only for next request; | |
| the bug had appeared in 0.8.48. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.48" date="2010-08-03"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь по умолчанию директива server_name имеет значение пустое имя "".<br/> | |
| Спасибо Геннадию Махомеду. | |
| </para> | |
| <para lang="en"> | |
| now the "server_name" directive default value is an empty name "".<br/> | |
| Thanks to Gena Makhomed. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь по умолчанию директива server_name_in_redirect имеет значение off. | |
| </para> | |
| <para lang="en"> | |
| now the "server_name_in_redirect" directive default value is "off". | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменные $geoip_dma_code, $geoip_area_code и $geoip_region_name.<br/> | |
| Спасибо Christine McGonagle. | |
| </para> | |
| <para lang="en"> | |
| the $geoip_dma_code, $geoip_area_code, and $geoip_region_name variables.<br/> | |
| Thanks to Christine McGonagle. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директивы proxy_pass, fastcgi_pass, uwsgi_pass и scgi_pass не наследовались | |
| в блоки limit_except. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_pass", "fastcgi_pass", "uwsgi_pass", and "scgi_pass" directives | |
| were not inherited inside "limit_except" blocks. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директивы proxy_cache_min_uses, fastcgi_cache_min_uses | |
| uwsgi_cache_min_uses и scgi_cache_min_uses не работали; | |
| ошибка появилась в 0.8.46. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_cache_min_uses", "fastcgi_cache_min_uses" | |
| "uwsgi_cache_min_uses", and "scgi_cache_min_uses" directives did not work; | |
| the bug had appeared in 0.8.46. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива fastcgi_split_path_info неверно использовала выделения, | |
| если в выделения попадала только часть URI.<br/> | |
| Спасибо Юрию Тарадаю и Frank Enderle. | |
| </para> | |
| <para lang="en"> | |
| the "fastcgi_split_path_info" directive used incorrectly captures, | |
| if only parts of an URI were captured.<br/> | |
| Thanks to Yuriy Taraday and Frank Enderle. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива rewrite не экранировала символ ";" при копировании из URI | |
| в аргументы.<br/> | |
| Спасибо Daisuke Murase. | |
| </para> | |
| <para lang="en"> | |
| the "rewrite" directive did not escape a ";" character during copying | |
| from URI to query string.<br/> | |
| Thanks to Daisuke Murase. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_image_filter_module закрывал соединение, | |
| если изображение было больше размера image_filter_buffer. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_image_filter_module closed a connection, | |
| if an image was larger than "image_filter_buffer" size. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.47" date="2010-07-28"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| переменная $request_time имела неверные значения для подзапросов. | |
| </para> | |
| <para lang="en"> | |
| $request_time variable had invalid values for subrequests. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки, перехваченные error_page, не кэшировались. | |
| </para> | |
| <para lang="en"> | |
| errors intercepted by error_page could not be cached. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если использовался параметр max_size, то cache manager мог зациклиться; | |
| ошибка появилась в 0.8.46. | |
| </para> | |
| <para lang="en"> | |
| a cache manager process may got caught in an endless loop, | |
| if max_size parameter was used; | |
| the bug had appeared in 0.8.46. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.46" date="2010-07-19"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| директивы proxy_no_cache, fastcgi_no_cache, uwsgi_no_cache | |
| и scgi_no_cache теперь влияют только на сохранение закэшированного ответа. | |
| </para> | |
| <para lang="en"> | |
| now the "proxy_no_cache", "fastcgi_no_cache", "uwsgi_no_cache", and | |
| "scgi_no_cache" directives affect on a cached response saving only. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы proxy_cache_bypass, fastcgi_cache_bypass, uwsgi_cache_bypass | |
| и scgi_cache_bypass. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_cache_bypass", "fastcgi_cache_bypass", "uwsgi_cache_bypass", | |
| and "scgi_cache_bypass" directives. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не освобождал память в keys_zone кэшей в случае ошибки работы с | |
| бэкендом: память освобождалась только по истечении времени неактивности | |
| или при недостатке памяти. | |
| </para> | |
| <para lang="en"> | |
| nginx did not free memory in cache keys zones if there was an error | |
| during working with backend: the memory was freed only after inactivity | |
| time or on memory low condition. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.45" date="2010-07-13"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| улучшения в модуле ngx_http_xslt_filter.<br/> | |
| Спасибо Laurence Rowe. | |
| </para> | |
| <para lang="en"> | |
| ngx_http_xslt_filter improvements.<br/> | |
| Thanks to Laurence Rowe. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ответ SSI модуля мог передаваться не полностью после команды include | |
| с параметром wait="yes"; | |
| ошибка появилась в 0.7.25.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| SSI response might be truncated after include with wait="yes"; | |
| the bug had appeared in 0.7.25.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива listen не поддерживала параметр setfib=0. | |
| </para> | |
| <para lang="en"> | |
| the "listen" directive did not support the "setfib=0" parameter. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.44" date="2010-07-05"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь nginx по умолчанию не кэширует ответы бэкендов, | |
| в заголовке которых есть строка "Set-Cookie". | |
| </para> | |
| <para lang="en"> | |
| now nginx does not cache by default backend responses, | |
| if they have a "Set-Cookie" header line. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива listen поддерживает параметр setfib.<br/> | |
| Спасибо Андрею Филонову. | |
| </para> | |
| <para lang="en"> | |
| the "listen" directive supports the "setfib" parameter.<br/> | |
| Thanks to Andrew Filonov. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива sub_filter могла изменять регистр букв при частичном совпадении. | |
| </para> | |
| <para lang="en"> | |
| the "sub_filter" directive might change character case on partial match. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| совместимость с HP/UX. | |
| </para> | |
| <para lang="en"> | |
| compatibility with HP/UX. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| совместимость с компилятором AIX xlC_r. | |
| </para> | |
| <para lang="en"> | |
| compatibility with AIX xlC_r compiler. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx считал большие пакеты SSLv2 как обычные текстовые запросы.<br/> | |
| Спасибо Miroslaw Jaworski. | |
| </para> | |
| <para lang="en"> | |
| nginx treated large SSLv2 packets as plain requests.<br/> | |
| Thanks to Miroslaw Jaworski. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.43" date="2010-06-30"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| ускорение загрузки больших баз geo-диапазонов. | |
| </para> | |
| <para lang="en"> | |
| large geo ranges base loading speed-up. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| перенаправление ошибки в "location /zero {return 204;}" без изменения | |
| кода ответа оставляло тело ошибки; | |
| ошибка появилась в 0.8.42. | |
| </para> | |
| <para lang="en"> | |
| an error_page redirection to "location /zero {return 204;}" without | |
| changing status code kept the error body; | |
| the bug had appeared in 0.8.42. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx мог закрывать IPv6 listen сокет во время переконфигурации.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| nginx might close IPv6 listen socket during reconfiguration.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| переменную $uid_set можно использовать на любой стадии обработки запроса. | |
| </para> | |
| <para lang="en"> | |
| the $uid_set variable may be used at any request processing stage. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.42" date="2010-06-21"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь nginx проверяет location'ы, заданные регулярными выражениями, | |
| если запрос полностью совпал с location'ом, заданным строкой префикса. | |
| Предыдущее поведение появилось в 0.7.1. | |
| </para> | |
| <para lang="en"> | |
| now nginx tests locations given by regular expressions, | |
| if request was matched exactly by a location given by a prefix string. | |
| The previous behavior has been introduced in 0.7.1. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_scgi_module.<br/> | |
| Спасибо Manlio Perillo. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_scgi_module.<br/> | |
| Thanks to Manlio Perillo. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| в директиве return можно добавлять текст ответа. | |
| </para> | |
| <para lang="en"> | |
| a text answer may be added to a "return" directive. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.41" date="2010-06-15"> | |
| <change type="security"> | |
| <para lang="ru"> | |
| рабочий процесс nginx/Windows мог завершаться аварийно при запросе файла | |
| с неверной кодировкой UTF-8. | |
| </para> | |
| <para lang="en"> | |
| nginx/Windows worker might be terminated abnormally if a requested file name | |
| has invalid UTF-8 encoding. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь nginx разрешает использовать пробелы в строке запроса. | |
| </para> | |
| <para lang="en"> | |
| now nginx allows to use spaces in a request line. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива proxy_redirect неправильно изменяла строку "Refresh" в заголовке | |
| ответа бэкенда.<br/> | |
| Спасибо Андрею Андрееву и Максиму Согину. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_redirect" directive changed incorrectly a backend "Refresh" | |
| response header line.<br/> | |
| Thanks to Andrey Andreew and Max Sogin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не поддерживал путь без имени хоста в | |
| строке "Destination" в заголовке запроса. | |
| </para> | |
| <para lang="en"> | |
| nginx did not support path without host name | |
| in "Destination" request header line. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.40" date="2010-06-07"> | |
| <change type="security"> | |
| <para lang="ru"> | |
| теперь nginx/Windows игнорирует имя потока файла по умолчанию.<br/> | |
| Спасибо Jose Antonio Vazquez Gonzalez. | |
| </para> | |
| <para lang="en"> | |
| now nginx/Windows ignores default file stream name.<br/> | |
| Thanks to Jose Antonio Vazquez Gonzalez. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_uwsgi_module.<br/> | |
| Спасибо Roberto De Ioris. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_uwsgi_module.<br/> | |
| Thanks to Roberto De Ioris. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива fastcgi_param со значением, начинающимся со строки "HTTP_", | |
| изменяет строку заголовка в запросе клиента. | |
| </para> | |
| <para lang="en"> | |
| a "fastcgi_param" directive with value starting with "HTTP_" overrides | |
| a client request header line. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| строки "If-Modified-Since", "If-Range" и им подобные в заголовке запроса | |
| клиента передавались FastCGI-серверу при кэшировании. | |
| </para> | |
| <para lang="en"> | |
| the "If-Modified-Since", "If-Range", etc. client request header lines | |
| were passed to FastCGI-server while caching. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| listen unix domain сокет нельзя было изменить во время переконфигурации.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| listen unix domain socket could not be changed during reconfiguration.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.39" date="2010-05-31"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| наследуемая директива alias неправильно работала во вложенном location'е. | |
| </para> | |
| <para lang="en"> | |
| an inherited "alias" directive worked incorrectly in inclusive location. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в комбинации директив alias с переменными и try_files; | |
| </para> | |
| <para lang="en"> | |
| in "alias" with variables and "try_files" directives combination. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| listen unix domain и IPv6 сокеты не наследовались во время обновления | |
| без перерыва.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| listen unix domain and IPv6 sockets did not inherit while online upgrade.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.38" date="2010-05-24"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы proxy_no_cache и fastcgi_no_cache. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_no_cache" and "fastcgi_no_cache" directives. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь при использовании переменной $scheme в директиве rewrite | |
| автоматически делается редирект.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| now the "rewrite" directive does a redirect automatically | |
| if the $scheme variable is used.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| теперь задержки в директиве limit_req соответствует описанному алгоритму.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| now "limit_req" delay directive conforms to the described algorithm.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| переменную $uid_got нельзя было использовать в SSI и перловом модулях. | |
| </para> | |
| <para lang="en"> | |
| the $uid_got variable might not be used in the SSI and perl modules. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.37" date="2010-05-17"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_split_clients_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_split_clients_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива map поддерживает ключи больше 255 символов. | |
| </para> | |
| <para lang="en"> | |
| the "map" directive supports keys more than 255 characters. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx игнорировал значения "private" и "no-store" в строке "Cache-Control" | |
| в заголовке ответа бэкенда. | |
| </para> | |
| <para lang="en"> | |
| nginx ignored the "private" and "no-store" values | |
| in the "Cache-Control" backend response header line. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| параметр stub в SSI-директиве include не использовался, | |
| если пустой ответ имел код 200. | |
| </para> | |
| <para lang="en"> | |
| a "stub" parameter of an "include" SSI directive was not used, | |
| if empty response has 200 status code. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если проксированный или FastCGI запрос внутренне перенаправлялся | |
| в другой проксированный или FastCGI location, | |
| то в рабочем процессе мог произойти segmentation fault; | |
| ошибка появилась в 0.8.33.<br/> | |
| Спасибо Yichun Zhang. | |
| </para> | |
| <para lang="en"> | |
| if a proxied or FastCGI request was internally redirected | |
| to another proxied or FastCGI location, | |
| then a segmentation fault might occur in a worker process; | |
| the bug had appeared in 0.8.33.<br/> | |
| Thanks to Yichun Zhang. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| соединения IMAP к серверу Zimbra могло зависнуть до таймаута.<br/> | |
| Спасибо Alan Batie. | |
| </para> | |
| <para lang="en"> | |
| IMAP connections may hang until they timed out | |
| while talking to Zimbra server.<br/> | |
| Thanks to Alan Batie. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.36" date="2010-04-22"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_dav_module неправильно обрабатывал методы DELETE, COPY и MOVE | |
| для симлинков. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_dav_module handled incorrectly the DELETE, COPY, and MOVE methods | |
| for symlinks. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль SSI в подзапросах использовал закэшированные в основном запросе | |
| значения переменных $query_string, $arg_... и им подобных. | |
| </para> | |
| <para lang="en"> | |
| values of the $query_string, $arg_..., etc. variables cached in main | |
| request were used by the SSI module in subrequests. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| значение переменной повторно экранировалось после каждого вывода | |
| SSI-команды echo; | |
| ошибка появилась в 0.6.14. | |
| </para> | |
| <para lang="en"> | |
| a variable value was repeatedly encoded after each | |
| an "echo" SSI-command output; | |
| the bug had appeared in 0.6.14. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| рабочий процесс зависал при запросе файла FIFO.<br/> | |
| Спасибо Vicente Aguilar и Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| a worker process hung if a FIFO file was requested.<br/> | |
| Thanks to Vicente Aguilar and Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| совместимость с OpenSSL-1.0.0 на 64-битном Linux.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| OpenSSL-1.0.0 compatibility on 64-bit Linux.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался с параметром --without-http-cache; | |
| ошибка появилась в 0.8.35. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built --without-http-cache; | |
| the bug had appeared in 0.8.35. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.35" date="2010-04-01"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь charset-фильтр работает до SSI-фильтра. | |
| </para> | |
| <para lang="en"> | |
| now the charset filter runs before the SSI filter. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива chunked_transfer_encoding. | |
| </para> | |
| <para lang="en"> | |
| the "chunked_transfer_encoding" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| символ "&" при копировании в аргументы в правилах rewrite не экранировался. | |
| </para> | |
| <para lang="en"> | |
| an "&" character was not escaped when it was copied in arguments part | |
| in a rewrite rule. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx мог завершаться аварийно во время обработки сигнала или | |
| при использовании директивы timer_resolution на платформах, | |
| не поддерживающих методы kqueue или eventport.<br/> | |
| Спасибо George Xie и Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| nginx might be terminated abnormally | |
| while a signal processing or if the directive "timer_resolution" was used | |
| on platforms which do not support kqueue or eventport notification methods.<br/> | |
| Thanks to George Xie and Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если временные файлы и постоянное место хранения располагались на разных | |
| файловых системах, то у постоянных файлов время изменения было неверным.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| if temporary files and permanent storage area resided at different | |
| file systems, then permanent file modification times were incorrect.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_memcached_module мог выдавать ошибку "memcached sent invalid | |
| trailer".<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| ngx_http_memcached_module might issue the error message "memcached sent invalid | |
| trailer".<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не мог собрать библиотеку zlib-1.2.4 из исходных текстов.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| nginx could not built zlib-1.2.4 library using the library sources.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе происходил segmentation fault, | |
| если перед ответом FastCGI-сервера было много вывода в stderr; | |
| ошибка появилась в 0.8.34.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault occurred in a worker process, | |
| if there was large stderr output before FastCGI response; | |
| the bug had appeared in 0.8.34.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.34" date="2010-03-03"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не поддерживал все шифры, используемые в клиентских сертификатах.<br/> | |
| Спасибо Иннокентию Еникееву. | |
| </para> | |
| <para lang="en"> | |
| nginx did not support all ciphers and digests used in client certificates.<br/> | |
| Thanks to Innocenty Enikeew. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx неправильно кэшировал FastCGI-ответы, если перед ответом было | |
| много вывода в stderr. | |
| </para> | |
| <para lang="en"> | |
| nginx cached incorrectly FastCGI responses if there was large stderr output | |
| before response. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не поддерживал HTTPS-рефереры. | |
| </para> | |
| <para lang="en"> | |
| nginx did not support HTTPS referrers. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx/Windows мог не находить файлы, если путь в конфигурации был задан | |
| в другом регистре; | |
| ошибка появилась в 0.8.33. | |
| </para> | |
| <para lang="en"> | |
| nginx/Windows might not find file if path in configuration was given | |
| in other character case; | |
| the bug had appeared in 0.8.33. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| переменная $date_local выдавала неверное время, | |
| если использовался формат "%s".<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| the $date_local variable has an incorrect value, | |
| if the "%s" format was used.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если ssl_session_cache не был установлен или установлен в none, | |
| то при проверке клиентского сертификаты могла происходить | |
| ошибка "session id context uninitialized"; | |
| ошибка появилась в 0.7.1. | |
| </para> | |
| <para lang="en"> | |
| if ssl_session_cache was not set or was set to "none", | |
| then during client certificate verify | |
| the error "session id context uninitialized" might occur; | |
| the bug had appeared in 0.7.1. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| geo-диапазон возвращал значение по умолчанию, если диапазон включал | |
| в себя одну и более сетей размером /16 и не начинался на границе сети | |
| размером /16. | |
| </para> | |
| <para lang="en"> | |
| a geo range returned default value if the range included two or more | |
| /16 networks and did not begin at /16 network boundary. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| блок, используемый в параметре stub в SSI-директиве include, | |
| выводился с MIME-типом "text/plain". | |
| </para> | |
| <para lang="en"> | |
| a block used in a "stub" parameter of an "include" SSI directive | |
| was output with "text/plain" MIME type. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| $r->sleep() не работал; | |
| ошибка появилась в 0.8.11. | |
| </para> | |
| <para lang="en"> | |
| $r->sleep() did not work; | |
| the bug had appeared in 0.8.11. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.33" date="2010-02-01"> | |
| <change type="security"> | |
| <para lang="ru"> | |
| теперь nginx/Windows игнорирует пробелы в конце URI.<br/> | |
| Спасибо Dan Crowley, Core Security Technologies. | |
| </para> | |
| <para lang="en"> | |
| now nginx/Windows ignores trailing spaces in URI.<br/> | |
| Thanks to Dan Crowley, Core Security Technologies. | |
| </para> | |
| </change> | |
| <change type="security"> | |
| <para lang="ru"> | |
| теперь nginx/Windows игнорирует короткие имена файлов.<br/> | |
| Спасибо Dan Crowley, Core Security Technologies. | |
| </para> | |
| <para lang="en"> | |
| now nginx/Windows ignores short files names.<br/> | |
| Thanks to Dan Crowley, Core Security Technologies. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь keepalive соединения после запросов POST не запрещаются для | |
| MSIE 7.0+.<br/> | |
| Спасибо Adam Lounds. | |
| </para> | |
| <para lang="en"> | |
| now keepalive connections after POST requests are not disabled for | |
| MSIE 7.0+.<br/> | |
| Thanks to Adam Lounds. | |
| </para> | |
| </change> | |
| <change type="workaround"> | |
| <para lang="ru"> | |
| теперь keepalive соединения запрещены для Safari.<br/> | |
| Спасибо Joshua Sierles. | |
| </para> | |
| <para lang="en"> | |
| now keepalive connections are disabled for Safari.<br/> | |
| Thanks to Joshua Sierles. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если проксированный или FastCGI запрос внутренне перенаправлялся | |
| в другой проксированный или FastCGI location, то переменная | |
| $upstream_response_time могла иметь ненормально большое значение; | |
| ошибка появилась в 0.8.7. | |
| </para> | |
| <para lang="en"> | |
| if a proxied or FastCGI request was internally redirected | |
| to another proxied or FastCGI location, | |
| then $upstream_response_time variable may have abnormally large value; | |
| the bug had appeared in 0.8.7. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault | |
| при отбрасывания тела запроса; | |
| ошибка появилась в 0.8.11. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process, | |
| while discarding a request body; | |
| the bug had appeared in 0.8.11. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.32" date="2010-01-11"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки при использовании кодировки UTF-8 в ngx_http_autoindex_module.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| UTF-8 encoding usage in the ngx_http_autoindex_module.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| именованные выделения в регулярных выражениях работали только для | |
| двух переменных.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| regular expression named captures worked for two names only.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| теперь в строке заголовка запроса "Host" используется имя "localhost", | |
| если в директиве auth_http указан unix domain сокет.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| now the "localhost" name is used in the "Host" request header line, | |
| if an unix domain socket is defined in the "auth_http" directive.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не поддерживал передачу chunk'ами для 201-ых ответов.<br/> | |
| Спасибо Julian Reich. | |
| </para> | |
| <para lang="en"> | |
| nginx did not support chunked transfer encoding for 201 responses.<br/> | |
| Thanks to Julian Reich. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если директива "expires modified" выставляла дату в прошлом, то в строке | |
| заголовка ответа "Cache-Control" выдавалось отрицательное число.<br/> | |
| Спасибо Алексею Капранову. | |
| </para> | |
| <para lang="en"> | |
| if the "expires modified" set date in the past, then a negative number | |
| was set in the "Cache-Control" response header line.<br/> | |
| Thanks to Alex Kapranoff. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.31" date="2009-12-23"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь директива error_page может перенаправлять ответы со статусом 301 и 302. | |
| </para> | |
| <para lang="en"> | |
| now the "error_page" directive may redirect the 301 and 302 responses. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменные $geoip_city_continent_code, $geoip_latitude и $geoip_longitude.<br/> | |
| Спасибо Arvind Sundararajan. | |
| </para> | |
| <para lang="en"> | |
| the $geoip_city_continent_code, $geoip_latitude, and $geoip_longitude | |
| variables.<br/> | |
| Thanks to Arvind Sundararajan. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_image_filter_module теперь всегда удаляет | |
| EXIF и другие данные, если они занимают больше 5% в JPEG-файле. | |
| </para> | |
| <para lang="en"> | |
| now the ngx_http_image_filter_module deletes always EXIF and other | |
| application specific data if the data consume more than 5% of a JPEG file. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx закрывал соединение при запросе закэшированного | |
| ответа с пустым телом.<br/> | |
| Спасибо Piotr Sikora. | |
| </para> | |
| <para lang="en"> | |
| nginx closed a connection if a cached response had an empty body.<br/> | |
| Thanks to Piotr Sikora. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx мог не собираться gcc 4.x при использовании оптимизации -O2 и выше.<br/> | |
| Спасибо Максиму Дунину и Денису Латыпову. | |
| </para> | |
| <para lang="en"> | |
| nginx might not be built by gcc 4.x if the -O2 or higher optimization option | |
| was used.<br/> | |
| Thanks to Maxim Dounin and Denis F. Latypoff. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| регулярные выражения в location всегда тестировались с учётом регистра; | |
| ошибка появилась в 0.8.25. | |
| </para> | |
| <para lang="en"> | |
| regular expressions in location were always tested in case-sensitive mode; | |
| the bug had appeared in 0.8.25. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx кэшировал 304 ответ, если в заголовке проксируемого запроса | |
| была строка "If-None-Match".<br/> | |
| Спасибо Tim Dettrick и David Kostal. | |
| </para> | |
| <para lang="en"> | |
| nginx cached a 304 response if there was the "If-None-Match" header line | |
| in a proxied request.<br/> | |
| Thanks to Tim Dettrick and David Kostal. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx/Windows пытался дважды удалить временный файл | |
| при перезаписи уже существующего файла. | |
| </para> | |
| <para lang="en"> | |
| nginx/Windows tried to delete a temporary file twice | |
| if the file should replace an already existent file. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.30" date="2009-12-15"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь по умолчанию размер буфера директивы large_client_header_buffers | |
| равен 8K.<br/> | |
| Спасибо Andrew Cholakian. | |
| </para> | |
| <para lang="en"> | |
| now the default buffer size of the "large_client_header_buffers" | |
| directive is 8K.<br/> | |
| Thanks to Andrew Cholakian. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| файл conf/fastcgi.conf для простых конфигураций FastCGI. | |
| </para> | |
| <para lang="en"> | |
| the conf/fastcgi.conf for simple FastCGI configurations. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx/Windows пытался дважды переименовать временный файл | |
| при перезаписи уже существующего файла. | |
| </para> | |
| <para lang="en"> | |
| nginx/Windows tried to rename a temporary file twice if the file | |
| should replace an already existent file. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки double free or corruption, возникающей, если имя хоста не было найдено; | |
| ошибка появилась в 0.8.22.<br/> | |
| Спасибо Константину Свисту. | |
| </para> | |
| <para lang="en"> | |
| of "double free or corruption" error issued if host could not be resolved; | |
| the bug had appeared in 0.8.22.<br/> | |
| Thanks to Konstantin Svist. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в использовании libatomic на некоторых платформах.<br/> | |
| Спасибо W-Mark Kubacki. | |
| </para> | |
| <para lang="en"> | |
| in libatomic usage on some platforms.<br/> | |
| Thanks to W-Mark Kubacki. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.29" date="2009-11-30"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь для проксируемых ответов HTTP/0.9 в лог пишется код ответа "009". | |
| </para> | |
| <para lang="en"> | |
| now the "009" status code is written to an access log for proxied HTTP/0.9 | |
| responses. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы addition_types, charset_types, gzip_types, ssi_types, | |
| sub_filter_types и xslt_types поддерживают параметр "*". | |
| </para> | |
| <para lang="en"> | |
| the "addition_types", "charset_types", "gzip_types", "ssi_types", | |
| "sub_filter_types", and "xslt_types" directives support an "*" parameter. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| использование встроенных атомарных операций GCC 4.1+.<br/> | |
| Спасибо W-Mark Kubacki. | |
| </para> | |
| <para lang="en"> | |
| GCC 4.1+ built-in atomic operations usage.<br/> | |
| Thanks to W-Mark Kubacki. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр --with-libatomic[=DIR] в configure.<br/> | |
| Спасибо W-Mark Kubacki. | |
| </para> | |
| <para lang="en"> | |
| the --with-libatomic[=DIR] option in the configure.<br/> | |
| Thanks to W-Mark Kubacki. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| listen unix domain сокет имели ограниченные права доступа. | |
| </para> | |
| <para lang="en"> | |
| listen unix domain socket had limited access rights. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| закэшированные ответы ответов HTTP/0.9 неправильно обрабатывались. | |
| </para> | |
| <para lang="en"> | |
| cached HTTP/0.9 responses were handled incorrectly. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| именованные выделения в регулярных выражениях, заданные как "?P<...>", | |
| не работали в директиве server_name.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| regular expression named captures given by "?P<...>" did not work | |
| in a "server_name" directive.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.28" date="2009-11-23"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался с параметром --without-pcre; | |
| ошибка появилась в 0.8.25. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built with the --without-pcre parameter; | |
| the bug had appeared in 0.8.25. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.27" date="2009-11-17"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| регулярные выражения не работали в nginx/Windows; | |
| ошибка появилась в 0.8.25. | |
| </para> | |
| <para lang="en"> | |
| regular expressions did not work in nginx/Windows; | |
| the bug had appeared in 0.8.25. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.26" date="2009-11-16"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки при использовании выделений в директиве rewrite; | |
| ошибка появилась в 0.8.25. | |
| </para> | |
| <para lang="en"> | |
| in captures usage in "rewrite" directive; | |
| the bug had appeared in 0.8.25. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался без параметра --with-debug; | |
| ошибка появилась в 0.8.25. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built without the --with-debug option; | |
| the bug had appeared in 0.8.25. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.25" date="2009-11-16"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь в лог ошибок не пишется сообщение, если переменная не найдена | |
| с помощью метода $r->variable(). | |
| </para> | |
| <para lang="en"> | |
| now no message is written in an error log if a variable is not found by | |
| $r->variable() method. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_degradation_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_degradation_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| именованные выделения в регулярных выражениях. | |
| </para> | |
| <para lang="en"> | |
| regular expression named captures. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь при использовании переменных в директиве proxy_pass не требуется | |
| задавать URI. | |
| </para> | |
| <para lang="en"> | |
| now URI part is not required a "proxy_pass" directive if variables are used. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь директива msie_padding работает и для Chrome. | |
| </para> | |
| <para lang="en"> | |
| now the "msie_padding" directive works for Chrome too. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе происходил segmentation fault при недостатке памяти; | |
| ошибка появилась в 0.8.18. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault occurred in a worker process on low memory condition; | |
| the bug had appeared in 0.8.18. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx передавал сжатые ответы клиентам, не поддерживающим сжатие, | |
| при настройках gzip_static on и gzip_vary off; | |
| ошибка появилась в 0.8.16. | |
| </para> | |
| <para lang="en"> | |
| nginx sent gzipped responses to clients those do not support gzip, | |
| if "gzip_static on" and "gzip_vary off"; | |
| the bug had appeared in 0.8.16. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.24" date="2009-11-11"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx всегда добавлял строку "Content-Encoding: gzip" в заголовок | |
| 304-ых ответов модуля ngx_http_gzip_static_module. | |
| </para> | |
| <para lang="en"> | |
| nginx always added "Content-Encoding: gzip" response header line | |
| in 304 responses sent by ngx_http_gzip_static_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался без параметра --with-debug; | |
| ошибка появилась в 0.8.23. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built without the --with-debug option; | |
| the bug had appeared in 0.8.23. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| параметр "unix:" в директиве set_real_ip_from неправильно наследовался | |
| с предыдущего уровня. | |
| </para> | |
| <para lang="en"> | |
| the "unix:" parameter of the "set_real_ip_from" directive inherited | |
| incorrectly from previous level. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в resolver'е при определении пустого имени. | |
| </para> | |
| <para lang="en"> | |
| in resolving empty name. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.23" date="2009-11-11"> | |
| <change type="security"> | |
| <para lang="ru"> | |
| теперь SSL/TLS renegotiation запрещён.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| now SSL/TLS renegotiation is disabled.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| listen unix domain сокет не наследовался во время обновления без перерыва. | |
| </para> | |
| <para lang="en"> | |
| listen unix domain socket did not inherit while online upgrade. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| параметр "unix:" в директиве set_real_ip_from не работал без ещё | |
| одной директивы с любым IP-адресом. | |
| </para> | |
| <para lang="en"> | |
| the "unix:" parameter of the "set_real_ip_from" directive did not without | |
| yet another directive with any IP address. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| segmentation fault и зацикливания в resolver'е. | |
| </para> | |
| <para lang="en"> | |
| segmentation fault and infinite looping in resolver. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в resolver'е.<br/> | |
| Спасибо Артёму Бохану. | |
| </para> | |
| <para lang="en"> | |
| in resolver.<br/> | |
| Thanks to Artem Bokhan. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.22" date="2009-11-03"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы proxy_bind, fastcgi_bind и memcached_bind. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_bind", "fastcgi_bind", and "memcached_bind" directives. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы access и deny поддерживают IPv6. | |
| </para> | |
| <para lang="en"> | |
| the "access" and the "deny" directives support IPv6. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива set_real_ip_from поддерживает IPv6 адреса в заголовках запроса. | |
| </para> | |
| <para lang="en"> | |
| the "set_real_ip_from" directive supports IPv6 addresses in request headers. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр "unix:" в директиве set_real_ip_from. | |
| </para> | |
| <para lang="en"> | |
| the "unix:" parameter of the "set_real_ip_from" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не удалял unix domain сокет после тестирования конфигурации. | |
| </para> | |
| <para lang="en"> | |
| nginx did not delete unix domain socket after configuration testing. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx удалял unix domain сокет во время обновления без перерыва. | |
| </para> | |
| <para lang="en"> | |
| nginx deleted unix domain socket while online upgrade. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| оператор "!-x" не работал.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| the "!-x" operator did not work.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault | |
| при использовании limit_rate в HTTPS сервере.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process, | |
| if limit_rate was used in HTTPS server.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при записи в лог переменной $limit_rate | |
| в рабочем процессе происходил segmentation fault.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process | |
| while $limit_rate logging.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если внутри блока server не было директивы listen; | |
| ошибка появилась в 0.8.21. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in a worker process, | |
| if there was no "listen" directive in "server" block; | |
| the bug had appeared in 0.8.21. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.21" date="2009-10-26"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь ключ -V показывает статус поддержки TLS SNI. | |
| </para> | |
| <para lang="en"> | |
| now the "-V" switch shows TLS SNI support. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива listen модуля HTTP поддерживает unix domain сокеты.<br/> | |
| Спасибо Hongli Lai. | |
| </para> | |
| <para lang="en"> | |
| the "listen" directive of the HTTP module supports unix domain sockets.<br/> | |
| Thanks to Hongli Lai. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр "default_server" в директиве listen. | |
| </para> | |
| <para lang="en"> | |
| the "default_server" parameter of the "listen" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь параметр "default" не обязателен для установки параметров listen-сокета. | |
| </para> | |
| <para lang="en"> | |
| now a "default" parameter is not required to set listen socket options. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не поддерживал даты в 2038 году на 32-битных платформах; | |
| </para> | |
| <para lang="en"> | |
| nginx did not support dates in 2038 year on 32-bit platforms; | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| утечки сокетов; | |
| ошибка появилась в 0.8.11. | |
| </para> | |
| <para lang="en"> | |
| socket leak; | |
| the bug had appeared in 0.8.11. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.20" date="2009-10-14"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь по умолчанию используются следующие шифры SSL: "HIGH:!ADH:!MD5". | |
| </para> | |
| <para lang="en"> | |
| now default SSL ciphers are "HIGH:!ADH:!MD5". | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_autoindex_module не показывал последний слэш для линков | |
| на каталоги; | |
| ошибка появилась в 0.7.15. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_autoindex_module did not show the trailing slash in links to | |
| a directory; | |
| the bug had appeared in 0.7.15. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не закрывал лог, заданный параметром конфигурации --error-log-path; | |
| ошибка появилась в 0.7.53. | |
| </para> | |
| <para lang="en"> | |
| nginx did not close a log file set by the --error-log-path configuration option; | |
| the bug had appeared in 0.7.53. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не считал запятую разделителем в строке "Cache-Control" в | |
| заголовке ответа бэкенда. | |
| </para> | |
| <para lang="en"> | |
| nginx did not treat a comma as separator in the "Cache-Control" backend response | |
| header line. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx/Windows мог не создать временный файл, файл в кэше или файл | |
| с помощью директив proxy/fastcgi_store, если рабочий процесс не имел | |
| достаточно прав для работы с каталогами верхнего уровня. | |
| </para> | |
| <para lang="en"> | |
| nginx/Windows might not create temporary file, a cache file, or | |
| "proxy/fastcgi_store"d file if a worker had no enough access rights | |
| for top level directories. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| строки "Set-Cookie" и "P3P" в заголовке ответа FastCGI-сервера не скрывались | |
| при кэшировании, если не использовались директивы fastcgi_hide_header | |
| с любыми параметрами. | |
| </para> | |
| <para lang="en"> | |
| the "Set-Cookie" and "P3P" FastCGI response header lines were not hidden | |
| while caching if no "fastcgi_hide_header" directives were used with | |
| any parameters. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx неверно считал размер кэша на диске. | |
| </para> | |
| <para lang="en"> | |
| nginx counted incorrectly disk cache size. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.19" date="2009-10-06"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь протокол SSLv2 по умолчанию запрещён. | |
| </para> | |
| <para lang="en"> | |
| now SSLv2 protocol is disabled by default. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь по умолчанию используются следующие шифры SSL: | |
| "ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM". | |
| </para> | |
| <para lang="en"> | |
| now default SSL ciphers are "ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM". | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива limit_req не работала; | |
| ошибка появилась в 0.8.18. | |
| </para> | |
| <para lang="en"> | |
| a "limit_req" directive did not work; | |
| the bug had appeared in 0.8.18. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.18" date="2009-10-06"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива read_ahead. | |
| </para> | |
| <para lang="en"> | |
| the "read_ahead" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь можно использовать несколько директив perl_modules. | |
| </para> | |
| <para lang="en"> | |
| now several "perl_modules" directives may be used. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы limit_req_log_level и limit_conn_log_level. | |
| </para> | |
| <para lang="en"> | |
| the "limit_req_log_level" and "limit_conn_log_level" directives. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| теперь директива limit_req соответствует алгоритму leaky bucket.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| now "limit_req" directive conforms to the leaky bucket algorithm.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не работал на Linux/sparc.<br/> | |
| Спасибо Marcus Ramberg. | |
| </para> | |
| <para lang="en"> | |
| nginx did not work on Linux/sparc.<br/> | |
| Thanks to Marcus Ramberg. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx слал символ '\0' в строке "Location" в заголовке в ответе на запрос | |
| MKCOL.<br/> | |
| Спасибо Xie Zhenye. | |
| </para> | |
| <para lang="en"> | |
| nginx sent '\0' in a "Location" response header line on MKCOL request.<br/> | |
| Thanks to Xie Zhenye. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| вместо кода ответа 499 в лог записывался код 0; | |
| ошибка появилась в 0.8.11. | |
| </para> | |
| <para lang="en"> | |
| zero status code was logged instead of 499 status code; | |
| the bug had appeared in 0.8.11. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| утечки сокетов; | |
| ошибка появилась в 0.8.11. | |
| </para> | |
| <para lang="en"> | |
| socket leak; | |
| the bug had appeared in 0.8.11. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.17" date="2009-09-28"> | |
| <change type="security"> | |
| <para lang="ru"> | |
| теперь символы "/../" запрещены в строке "Destination" в заголовке запроса. | |
| </para> | |
| <para lang="en"> | |
| now "/../" are disabled in "Destination" request header line. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь значение переменной $host всегда в нижнем регистре. | |
| </para> | |
| <para lang="en"> | |
| now $host variable value is always low case. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $ssl_session_id. | |
| </para> | |
| <para lang="en"> | |
| the $ssl_session_id variable. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| утечки сокетов; | |
| ошибка появилась в 0.8.11. | |
| </para> | |
| <para lang="en"> | |
| socket leak; | |
| the bug had appeared in 0.8.11. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.16" date="2009-09-22"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива image_filter_transparency. | |
| </para> | |
| <para lang="en"> | |
| the "image_filter_transparency" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива "addition_types" была неверно названа "addtion_types". | |
| </para> | |
| <para lang="en"> | |
| "addition_types" directive was incorrectly named "addtion_types". | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| порчи кэша resolver'а.<br/> | |
| Спасибо Matthew Dempsky. | |
| </para> | |
| <para lang="en"> | |
| resolver cache poisoning.<br/> | |
| Thanks to Matthew Dempsky. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| утечки памяти в resolver'е.<br/> | |
| Спасибо Matthew Dempsky. | |
| </para> | |
| <para lang="en"> | |
| memory leak in resolver.<br/> | |
| Thanks to Matthew Dempsky. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| неверная строка запроса в переменной $request записывалась в access_log | |
| только при использовании error_log на уровне info или debug. | |
| </para> | |
| <para lang="en"> | |
| invalid request line in $request variable was written in access_log | |
| only if error_log was set to "info" or "debug" level. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в поддержке альфа-канала PNG в модуле ngx_http_image_filter_module. | |
| </para> | |
| <para lang="en"> | |
| in PNG alpha-channel support in the ngx_http_image_filter_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx всегда добавлял строку "Vary: Accept-Encoding" в заголовок ответа, | |
| если обе директивы gzip_static и gzip_vary были включены. | |
| </para> | |
| <para lang="en"> | |
| nginx always added "Vary: Accept-Encoding" response header line, | |
| if both "gzip_static" and "gzip_vary" were on. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в поддержке кодировки UTF-8 директивой try_files в nginx/Windows. | |
| </para> | |
| <para lang="en"> | |
| in UTF-8 encoding support by "try_files" directive in nginx/Windows. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки при использовании post_action; | |
| ошибка появилась в 0.8.11.<br/> | |
| Спасибо Игорю Артемьеву. | |
| </para> | |
| <para lang="en"> | |
| in "post_action" directive usage; | |
| the bug had appeared in 0.8.11.<br/> | |
| Thanks to Igor Artemiev. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.15" date="2009-09-14"> | |
| <change type="security"> | |
| <para lang="ru"> | |
| при обработке специально созданного запроса | |
| в рабочем процессе мог произойти segmentation fault.<br/> | |
| Спасибо Chris Ries. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in worker process | |
| while specially crafted request handling.<br/> | |
| Thanks to Chris Ries. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если были описаны имена .domain.tld, .sub.domain.tld и .domain-some.tld, | |
| то имя .sub.domain.tld попадало под маску .domain.tld. | |
| </para> | |
| <para lang="en"> | |
| if names .domain.tld, .sub.domain.tld, and .domain-some.tld were defined, | |
| then the name .sub.domain.tld was matched by .domain.tld. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в поддержке прозрачности в модуле ngx_http_image_filter_module. | |
| </para> | |
| <para lang="en"> | |
| in transparency support in the ngx_http_image_filter_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в файловом AIO. | |
| </para> | |
| <para lang="en"> | |
| in file AIO. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки при использовании X-Accel-Redirect; | |
| ошибка появилась в 0.8.11. | |
| </para> | |
| <para lang="en"> | |
| in X-Accel-Redirect usage; | |
| the bug had appeared in 0.8.11. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки при использовании встроенного перла; | |
| ошибка появилась в 0.8.11. | |
| </para> | |
| <para lang="en"> | |
| in embedded perl module; | |
| the bug had appeared in 0.8.11. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.14" date="2009-09-07"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| устаревший закэшированный запрос мог залипнуть в состоянии "UPDATING". | |
| </para> | |
| <para lang="en"> | |
| an expired cached response might stick in the "UPDATING" state. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании error_log на уровне info или debug | |
| в рабочем процессе мог произойти segmentation fault.<br/> | |
| Спасибо Сергею Боченкову. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in worker process, | |
| if error_log was set to info or debug level.<br/> | |
| Thanks to Sergey Bochenkov. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки при использовании встроенного перла; | |
| ошибка появилась в 0.8.11. | |
| </para> | |
| <para lang="en"> | |
| in embedded perl module; | |
| the bug had appeared in 0.8.11. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива error_page не перенаправляла ошибку 413; | |
| ошибка появилась в 0.6.10. | |
| </para> | |
| <para lang="en"> | |
| an "error_page" directive did not redirect a 413 error; | |
| the bug had appeared in 0.6.10. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.13" date="2009-08-31"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве "aio sendfile"; | |
| ошибка появилась в 0.8.12. | |
| </para> | |
| <para lang="en"> | |
| in the "aio sendfile" directive; | |
| the bug had appeared in 0.8.12. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался без параметра --with-file-aio на FreeBSD; | |
| ошибка появилась в 0.8.12. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built without the --with-file-aio option on FreeBSD; | |
| the bug had appeared in 0.8.12. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.12" date="2009-08-31"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр sendfile в директиве aio во FreeBSD. | |
| </para> | |
| <para lang="en"> | |
| the "sendfile" parameter in the "aio" directive on FreeBSD. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки при использовании try_files; | |
| ошибка появилась в 0.8.11. | |
| </para> | |
| <para lang="en"> | |
| in try_files; | |
| the bug had appeared in 0.8.11. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки при использовании memcached; | |
| ошибка появилась в 0.8.11. | |
| </para> | |
| <para lang="en"> | |
| in memcached; | |
| the bug had appeared in 0.8.11. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.11" date="2009-08-28"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь директива "gzip_disable msie6" не запрещает сжатие для | |
| <nobr>MSIE 6.0 SV1.</nobr> | |
| </para> | |
| <para lang="en"> | |
| now directive "gzip_disable msie6" does not disable gzipping for | |
| <nobr>MSIE 6.0 SV1.</nobr> | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка файлового AIO во FreeBSD и Linux. | |
| </para> | |
| <para lang="en"> | |
| file AIO support on FreeBSD and Linux. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива directio_alignment. | |
| </para> | |
| <para lang="en"> | |
| the "directio_alignment" directive. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.10" date="2009-08-24"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| утечек памяти при использовании базы GeoIP City. | |
| </para> | |
| <para lang="en"> | |
| memory leaks if GeoIP City database was used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки при копировании временных файлов в постоянное место хранения; | |
| ошибка появилась в 0.8.9. | |
| </para> | |
| <para lang="en"> | |
| in copying temporary files to permanent storage area; | |
| the bug had appeared in 0.8.9. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.9" date="2009-08-17"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь стартовый загрузчик кэша работает в отдельном процесс; | |
| это должно улучшить обработку больших кэшей. | |
| </para> | |
| <para lang="en"> | |
| now the start cache loader runs in a separate process; | |
| this should improve large caches handling. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь временные файлы и постоянное место хранения могут располагаться | |
| на разных файловых системах. | |
| </para> | |
| <para lang="en"> | |
| now temporary files and permanent storage area may reside at | |
| different file systems. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.8" date="2009-08-10"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в обработке заголовков ответа, разделённых в FastCGI-записях. | |
| </para> | |
| <para lang="en"> | |
| in handling FastCGI headers split in records. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если запрос обрабатывался в двух проксированных или FastCGI location'ах | |
| и в первом из них использовалось кэширование, | |
| то в рабочем процессе происходил segmentation fault; | |
| ошибка появилась в 0.8.7. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault occurred in worker process, | |
| if a request was handled in two proxied or FastCGIed locations | |
| and a caching was enabled in the first location; | |
| the bug had appeared in 0.8.7. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.7" date="2009-07-27"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| минимальная поддерживаемая версия OpenSSL—0.9.7. | |
| </para> | |
| <para lang="en"> | |
| minimum supported OpenSSL version is 0.9.7. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| параметр ask директивы ssl_verify_client изменён на параметр optional | |
| и теперь он проверяет клиентский сертификат, если он был предложен.<br/> | |
| Спасибо Brice Figureau. | |
| </para> | |
| <para lang="en"> | |
| the "ask" parameter of the "ssl_verify_client" directive was changed | |
| to the "optional" parameter and now it checks a client certificate if it was | |
| offered.<br/> | |
| Thanks to Brice Figureau. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $ssl_client_verify.<br/> | |
| Спасибо Brice Figureau. | |
| </para> | |
| <para lang="en"> | |
| the $ssl_client_verify variable.<br/> | |
| Thanks to Brice Figureau. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива ssl_crl.<br/> | |
| Спасибо Brice Figureau. | |
| </para> | |
| <para lang="en"> | |
| the "ssl_crl" directive.<br/> | |
| Thanks to Brice Figureau. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр proxy директивы geo. | |
| </para> | |
| <para lang="en"> | |
| the "proxy" parameter of the "geo" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива image_filter поддерживает переменные для задания размеров. | |
| </para> | |
| <para lang="en"> | |
| the "image_filter" directive supports variables for setting size. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| использование переменной $ssl_client_cert портило память; | |
| ошибка появилась в 0.7.7.<br/> | |
| Спасибо Сергею Журавлёву. | |
| </para> | |
| <para lang="en"> | |
| the $ssl_client_cert variable usage corrupted memory; | |
| the bug had appeared in 0.7.7.<br/> | |
| Thanks to Sergey Zhuravlev. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директивы proxy_pass_header и fastcgi_pass_header" не передавали клиенту | |
| строки "X-Accel-Redirect", "X-Accel-Limit-Rate", "X-Accel-Buffering" и | |
| "X-Accel-Charset" из заголовка ответа бэкенда.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| "proxy_pass_header" and "fastcgi_pass_header" directives did not pass to | |
| a client the "X-Accel-Redirect", "X-Accel-Limit-Rate", "X-Accel-Buffering", | |
| and "X-Accel-Charset" lines from backend response header.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в обработке строк "Last-Modified" и "Accept-Ranges" в заголовке ответа бэкенда; | |
| ошибка появилась в 0.7.44.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| in handling "Last-Modified" and "Accept-Ranges" backend response header lines; | |
| the bug had appeared in 0.7.44.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки "[alert] zero size buf" при получении пустых ответы в подзапросах; | |
| ошибка появилась в 0.8.5. | |
| </para> | |
| <para lang="en"> | |
| the "[alert] zero size buf" error if subrequest returns an empty response; | |
| the bug had appeared in 0.8.5. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.6" date="2009-07-20"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_geoip_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_geoip_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| XSLT-фильтр мог выдавать ошибку "not well formed XML document" для | |
| правильного документа.<br/> | |
| Спасибо Kuramoto Eiji. | |
| </para> | |
| <para lang="en"> | |
| XSLT filter may fail with message "not well formed XML document" | |
| for valid XML document.<br/> | |
| Thanks to Kuramoto Eiji. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в MacOSX, Cygwin и nginx/Windows при проверке location'ов, заданных | |
| регулярным выражением, теперь всегда делается сравнение без учёта | |
| регистра символов. | |
| </para> | |
| <para lang="en"> | |
| now in MacOSX, Cygwin, and nginx/Windows locations given by a regular | |
| expression are always tested in case insensitive mode. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| теперь nginx/Windows игнорирует точки в конце URI.<br/> | |
| Спасибо Hugo Leisink. | |
| </para> | |
| <para lang="en"> | |
| now nginx/Windows ignores trailing dots in URI.<br/> | |
| Thanks to Hugo Leisink. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| имя файла указанного в --conf-path игнорировалось при установке; | |
| ошибка появилась в 0.6.6.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| name of file specified in --conf-path was not honored during installation; | |
| the bug had appeared in 0.6.6.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.5" date="2009-07-13"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| теперь nginx разрешает подчёркивания в методе запроса. | |
| </para> | |
| <para lang="en"> | |
| now nginx allows underscores in a request method. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании HTTP Basic-аутентификации на Windows | |
| для неверных имени/пароля возвращалась 500-ая ошибка. | |
| </para> | |
| <para lang="en"> | |
| a 500 error code was returned for invalid login/password while HTTP | |
| Basic authentication on Windows. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ответы модуля ngx_http_perl_module не работали в подзапросах. | |
| </para> | |
| <para lang="en"> | |
| ngx_http_perl_module responses did not work in subrequests. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_limit_req_module.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| in ngx_http_limit_req_module.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.4" date="2009-06-22"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался с параметром --without-http-cache; | |
| ошибка появилась в 0.8.3. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built --without-http-cache; | |
| the bug had appeared in 0.8.3. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.3" date="2009-06-19"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $upstream_cache_status. | |
| </para> | |
| <para lang="en"> | |
| the $upstream_cache_status variable. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на MacOSX 10.6. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on MacOSX 10.6. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался с параметром --without-http-cache; | |
| ошибка появилась в 0.8.2. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built --without-http-cache; | |
| the bug had appeared in 0.8.2. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если использовался перехват 401 ошибки от бэкенда и бэкенд | |
| не возвращал строку "WWW-Authenticate" в заголовке ответа, | |
| то в рабочем процессе происходил segmentation fault.<br/> | |
| Спасибо Евгению Мычло. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault occurred in worker process, | |
| if a backend 401 error was intercepted and the backend did not set | |
| the "WWW-Authenticate" response header line.<br/> | |
| Thanks to Eugene Mychlo. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.2" date="2009-06-15"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| во взаимодействии open_file_cache и proxy/fastcgi кэша на старте. | |
| </para> | |
| <para lang="en"> | |
| in open_file_cache and proxy/fastcgi cache interaction on start up. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| open_file_cache мог кэшировать открытые файлы очень долго; | |
| ошибка появилась в 0.7.4. | |
| </para> | |
| <para lang="en"> | |
| open_file_cache might cache open file descriptors too long; | |
| the bug had appeared in 0.7.4. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.1" date="2009-06-08"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр updating в директивах proxy_cache_use_stale и fastcgi_cache_use_stale. | |
| </para> | |
| <para lang="en"> | |
| the "updating" parameter in "proxy_cache_use_stale" and | |
| "fastcgi_cache_use_stale" directives. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| строки "If-Modified-Since", "If-Range" и им подобные в заголовке запроса | |
| клиента передавались бэкенду при кэшировании, если не использовалась | |
| директива proxy_set_header с любыми параметрами. | |
| </para> | |
| <para lang="en"> | |
| the "If-Modified-Since", "If-Range", etc. client request header lines | |
| were passed to backend while caching if no "proxy_set_header" directive | |
| was used with any parameters. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| строки "Set-Cookie" и "P3P" в заголовке ответа бэкенда не скрывались | |
| при кэшировании, если не использовались директивы | |
| proxy_hide_header/fastcgi_hide_header с любыми параметрами. | |
| </para> | |
| <para lang="en"> | |
| the "Set-Cookie" and "P3P" response header lines were not hidden while caching | |
| if no "proxy_hide_header/fastcgi_hide_header" directives were used with | |
| any parameters. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_image_filter_module не понимал формат GIF87a.<br/> | |
| Спасибо Денису Ильиных. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_image_filter_module did not support GIF87a format.<br/> | |
| Thanks to Denis Ilyinyh. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на Solaris 10 и более ранних; | |
| ошибка появилась в 0.7.56. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built modules on Solaris 10 and early; | |
| the bug had appeared in 0.7.56. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.8.0" date="2009-06-02"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива keepalive_requests. | |
| </para> | |
| <para lang="en"> | |
| the "keepalive_requests" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива limit_rate_after.<br/> | |
| Спасибо Ivan Debnar. | |
| </para> | |
| <para lang="en"> | |
| the "limit_rate_after" directive.<br/> | |
| Thanks to Ivan Debnar. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| XSLT-фильтр не работал в подзапросах. | |
| </para> | |
| <para lang="en"> | |
| XLST filter did not work in subrequests. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| обработке относительных путей в nginx/Windows. | |
| </para> | |
| <para lang="en"> | |
| in relative paths handling in nginx/Windows. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в proxy_store, fastcgi_store, proxy_cache и fastcgi_cache в nginx/Windows. | |
| </para> | |
| <para lang="en"> | |
| in proxy_store, fastcgi_store, proxy_cache, and fastcgi_cache in nginx/Windows. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в обработке ошибок выделения памяти.<br/> | |
| Спасибо Максиму Дунину и Кириллу Коринскому. | |
| </para> | |
| <para lang="en"> | |
| in memory allocation error handling.<br/> | |
| Thanks to Maxim Dounin and Kirill A. Korinskiy. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.59" date="2009-05-25"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы proxy_cache_methods и fastcgi_cache_methods. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_cache_methods" and "fastcgi_cache_methods" directives. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| утечки сокетов; | |
| ошибка появилась в 0.7.25.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| socket leak; | |
| the bug had appeared in 0.7.25.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании переменной $request_body | |
| в рабочем процессе происходил segmentation fault, | |
| если в запросе не было тела; | |
| ошибка появилась в 0.7.58. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault occurred in worker process, | |
| <nobr>if a request</nobr> had no body and the $request_body | |
| variable was used;<br/> | |
| the bug had appeared in 0.7.58. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| SSL-модули могли не собираться на Solaris и Linux; | |
| ошибка появилась в 0.7.56. | |
| </para> | |
| <para lang="en"> | |
| the SSL modules might not built on Solaris and Linux;<br/> | |
| the bug had appeared in 0.7.56. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ответы модуля ngx_http_xslt_filter_module не обрабатывались | |
| SSI-, charset- и gzip-фильтрами. | |
| </para> | |
| <para lang="en"> | |
| ngx_http_xslt_filter_module responses were not handled by SSI, charset, | |
| and gzip filters. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива charset не ставила кодировку для ответов модуля | |
| ngx_http_gzip_static_module. | |
| </para> | |
| <para lang="en"> | |
| a "charset" directive did not set a charset to ngx_http_gzip_static_module | |
| responses. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.58" date="2009-05-18"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива listen почтового прокси-сервера поддерживает IPv6. | |
| </para> | |
| <para lang="en"> | |
| a "listen" directive of the mail proxy module supports IPv6. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива image_filter_jpeg_quality. | |
| </para> | |
| <para lang="en"> | |
| the "image_filter_jpeg_quality" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива client_body_in_single_buffer. | |
| </para> | |
| <para lang="en"> | |
| the "client_body_in_single_buffer" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $request_body. | |
| </para> | |
| <para lang="en"> | |
| the $request_body variable. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_autoindex_module в ссылках на имена файлов, | |
| содержащих символ ":". | |
| </para> | |
| <para lang="en"> | |
| in ngx_http_autoindex_module in file name links | |
| having a ":" symbol in the name. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| процедура "make upgrade" не работала; | |
| ошибка появилась в 0.7.53.<br/> | |
| Спасибо Денису Латыпову. | |
| </para> | |
| <para lang="en"> | |
| "make upgrade" procedure did not work; | |
| the bug had appeared in 0.7.53.<br/> | |
| Thanks to Denis F. Latypoff. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.57" date="2009-05-12"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при перенаправлении ошибок модуля ngx_http_image_filter_module | |
| в именованный location в рабочем процессе происходил floating-point fault; | |
| ошибка появилась в 0.7.56. | |
| </para> | |
| <para lang="en"> | |
| a floating-point fault occurred in worker process, | |
| if the ngx_http_image_filter_module errors were redirected to named location; | |
| the bug had appeared in 0.7.56. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.56" date="2009-05-11"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| nginx/Windows поддерживает IPv6 в директиве listen модуля HTTP. | |
| </para> | |
| <para lang="en"> | |
| nginx/Windows supports IPv6 in a "listen" directive of the HTTP module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_image_filter_module. | |
| </para> | |
| <para lang="en"> | |
| in ngx_http_image_filter_module. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.55" date="2009-05-06"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| параметры http_XXX в директивах proxy_cache_use_stale | |
| и fastcgi_cache_use_stale не работали. | |
| </para> | |
| <para lang="en"> | |
| the http_XXX parameters in "proxy_cache_use_stale" and | |
| "fastcgi_cache_use_stale" directives did not work. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| fastcgi кэш не кэшировал ответы, состоящие только из заголовка. | |
| </para> | |
| <para lang="en"> | |
| fastcgi cache did not cache header only responses. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки "select() failed (9: Bad file descriptor)" в nginx/Unix | |
| и "select() failed (10038: ...)" в nginx/Windows. | |
| </para> | |
| <para lang="en"> | |
| of "select() failed (9: Bad file descriptor)" error in nginx/Unix | |
| and "select() failed (10038: ...)" error in nginx/Windows. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы debug_connection | |
| в рабочем процессе мог произойти segmentation fault; | |
| ошибка появилась в 0.7.54. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in worker process, | |
| if an "debug_connection" directive was used; | |
| the bug had appeared in 0.7.54. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в сборке модуля ngx_http_image_filter_module. | |
| </para> | |
| <para lang="en"> | |
| fix ngx_http_image_filter_module building errors. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| файлы больше 2G не передавались с использованием $r->sendfile.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| the files bigger than 2G could not be transferred using $r->sendfile.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.54" date="2009-05-01"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_image_filter_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_image_filter_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы proxy_ignore_headers и fastcgi_ignore_headers. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_ignore_headers" and "fastcgi_ignore_headers" directives. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании переменных "open_file_cache_errors on" | |
| в рабочем процессе мог произойти segmentation fault; | |
| ошибка появилась в 0.7.53. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in worker process, | |
| if an "open_file_cache_errors off" directive was used; | |
| the bug had appeared in 0.7.53. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива "port_in_redirect off" не работала; | |
| ошибка появилась в 0.7.39. | |
| </para> | |
| <para lang="en"> | |
| the "port_in_redirect off" directive did not work; | |
| the bug had appeared in 0.7.39. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| улучшение обработки ошибок метода select. | |
| </para> | |
| <para lang="en"> | |
| improve handling of "select" method errors. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки "select() failed (10022: ...)" в nginx/Windows. | |
| </para> | |
| <para lang="en"> | |
| of "select() failed (10022: ...)" error in nginx/Windows. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в текстовых сообщениях об ошибках в nginx/Windows; | |
| ошибка появилась в 0.7.53. | |
| </para> | |
| <para lang="en"> | |
| in error text descriptions in nginx/Windows; | |
| the bug had appeared in 0.7.53. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.53" date="2009-04-27"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь лог, указанный в --error-log-path, создаётся с самого начала работы. | |
| </para> | |
| <para lang="en"> | |
| now a log set by --error-log-path is created from the very start-up. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь ошибки и предупреждения при старте записываются в error_log | |
| и выводятся на stderr. | |
| </para> | |
| <para lang="en"> | |
| now the start up errors and warnings are outputted to an error_log and stderr. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| при сборке с пустым параметром --prefix= nginx использует как префикс каталог, | |
| в котором он был запущен. | |
| </para> | |
| <para lang="en"> | |
| the empty --prefix= configure parameter forces nginx to use a directory | |
| where it was run as prefix. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| ключ -p. | |
| </para> | |
| <para lang="en"> | |
| the -p switch. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| ключ -s на Unix-платформах. | |
| </para> | |
| <para lang="en"> | |
| the -s switch on Unix platforms. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| ключи -? и -h.<br/> | |
| Спасибо Jerome Loyet. | |
| </para> | |
| <para lang="en"> | |
| the -? and -h switches.<br/> | |
| Thanks to Jerome Loyet. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь ключи можно задавать в сжатой форме. | |
| </para> | |
| <para lang="en"> | |
| now switches may be set in condensed form. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx/Windows не работал, если файл конфигурации был задан ключом -c. | |
| </para> | |
| <para lang="en"> | |
| nginx/Windows did not work if configuration file was given by the -c switch. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директив proxy_store, fastcgi_store, | |
| proxy_cache или fastcgi_cache временные файлы могли не удаляться.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| temporary files might be not removed if the "proxy_store", "fastcgi_store", | |
| "proxy_cache", or "fastcgi_cache" were used.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в заголовке Auth-Method запроса серверу аутентификации почтового | |
| прокси-сервера передавалось неверное значение; | |
| ошибка появилась в 0.7.34.<br/> | |
| Спасибо Simon Lecaille. | |
| </para> | |
| <para lang="en"> | |
| an incorrect value was passed to mail proxy authentication server | |
| in "Auth-Method" header line; | |
| the bug had appeared<br/> | |
| in 0.7.34.<br/> | |
| Thanks to Simon Lecaille. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при логгировании на Linux не писались текстовые описания системных ошибок; | |
| ошибка появилась в 0.7.45. | |
| </para> | |
| <para lang="en"> | |
| system error text descriptions were not logged on Linux;<br/> | |
| the bug had appeared in 0.7.45. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива fastcgi_cache_min_uses не работала.<br/> | |
| Спасибо Андрею Воробьёву. | |
| </para> | |
| <para lang="en"> | |
| the "fastcgi_cache_min_uses" directive did not work.<br/> | |
| Thanks to Andrew Vorobyoff. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.52" date="2009-04-20"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| первая бинарная версия под Windows. | |
| </para> | |
| <para lang="en"> | |
| the first native Windows binary release. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| корректная обработка метода HEAD при кэшировании. | |
| </para> | |
| <para lang="en"> | |
| in processing HEAD method while caching. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| корректная обработка строк "If-Modified-Since", "If-Range" и им подобных | |
| в заголовке запроса клиента при кэшировании. | |
| </para> | |
| <para lang="en"> | |
| in processing the "If-Modified-Since", "If-Range", etc. client request | |
| header lines while caching. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| теперь строки "Set-Cookie" и "P3P" скрываются в заголовке ответа | |
| для закэшированных ответов. | |
| </para> | |
| <para lang="en"> | |
| now the "Set-Cookie" and "P3P" header lines are hidden in cacheable responses. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если nginx был собран с модулем ngx_http_perl_module и perl | |
| поддерживал потоки, то при выходе основного процесса | |
| могла выдаваться ошибка "panic: MUTEX_LOCK". | |
| </para> | |
| <para lang="en"> | |
| if nginx was built with the ngx_http_perl_module and with a perl which | |
| supports threads, then during a master process exit | |
| the message "panic: MUTEX_LOCK" might be issued. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался с параметром --without-http-cache; | |
| ошибка появилась в 0.7.48. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built --without-http-cache; | |
| the bug had appeared in 0.7.48. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на платформах, отличных от i386, amd64, sparc и ppc; | |
| ошибка появилась в 0.7.42. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on platforms different from i386, amd64, sparc, | |
| and ppc; | |
| the bug had appeared in 0.7.42. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.51" date="2009-04-12"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива try_files поддерживает код ответа в последнем параметре. | |
| </para> | |
| <para lang="en"> | |
| the "try_files" directive supports a response code in the fallback parameter. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь в директиве return можно использовать любой код ответа. | |
| </para> | |
| <para lang="en"> | |
| now any response code can be used in the "return" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива error_page делала внешний редирект без строки запроса; | |
| ошибка появилась в 0.7.44. | |
| </para> | |
| <para lang="en"> | |
| the "error_page" directive made an external redirect without query string; | |
| the bug had appeared in 0.7.44. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если сервера слушали на нескольких явно описанных адресах, | |
| то виртуальные сервера могли не работать; | |
| ошибка появилась в 0.7.39. | |
| </para> | |
| <para lang="en"> | |
| if servers listened on several defined explicitly addresses, | |
| then virtual servers might not work; | |
| the bug had appeared in 0.7.39. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.50" date="2009-04-06"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| переменные $arg_... не работали; | |
| ошибка появилась в 0.7.49. | |
| </para> | |
| <para lang="en"> | |
| the $arg_... variables did not work; | |
| the bug had appeared in 0.7.49. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.49" date="2009-04-06"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании переменных $arg_... | |
| в рабочем процессе мог произойти segmentation fault; | |
| ошибка появилась в 0.7.48. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in worker process, | |
| if the $arg_... variables were used; | |
| the bug had appeared in 0.7.48. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.48" date="2009-04-06"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива proxy_cache_key. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_cache_key" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| теперь nginx учитывает при кэшировании строки "X-Accel-Expires", | |
| "Expires" и "Cache-Control" в заголовке ответа бэкенда. | |
| </para> | |
| <para lang="en"> | |
| now nginx takes into account the "X-Accel-Expires", "Expires", and | |
| "Cache-Control" header lines in a backend response. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| теперь nginx кэширует только ответы на запросы GET. | |
| </para> | |
| <para lang="en"> | |
| now nginx caches responses for the GET requests only. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива fastcgi_cache_key не наследовалась. | |
| </para> | |
| <para lang="en"> | |
| the "fastcgi_cache_key" directive was not inherited. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| переменные $arg_... не работали с SSI-подзапросами.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| the $arg_... variables did not work with SSI subrequests.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался с библиотекой uclibc.<br/> | |
| Спасибо Timothy Redaelli. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built with uclibc library.<br/> | |
| Thanks to Timothy Redaelli. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на OpenBSD; | |
| ошибка появилась <nobr>в 0.7.46.</nobr> | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on OpenBSD; | |
| the bug had <nobr>appeared in 0.7.46.</nobr> | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.47" date="2009-04-01"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на FreeBSD 6 и более ранних версиях; | |
| ошибка появилась в 0.7.46. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on FreeBSD 6 and early versions; | |
| the bug had appeared in 0.7.46. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на MacOSX; | |
| ошибка появилась в 0.7.46. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on MacOSX; | |
| the bug had <nobr>appeared in 0.7.46.</nobr> | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если использовался параметр max_size, то cache manager мог удалить весь кэш; | |
| ошибка появилась в 0.7.46. | |
| </para> | |
| <para lang="en"> | |
| if the "max_size" parameter was set, then the cache manager might purge | |
| a whole cache; | |
| the bug had appeared in 0.7.46. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если директивы proxy_cache/fastcgi_cache | |
| и proxy_cache_valid/ fastcgi_cache_valid не были заданы на одном уровне; | |
| ошибка появилась в 0.7.46. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in worker process, | |
| if the "proxy_cache"/"fastcgi_cache" and | |
| the "proxy_cache_valid"/ "fastcgi_cache_valid" were set on different levels; | |
| the bug had appeared in 0.7.46. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault | |
| при перенаправлении запроса проксированному или FastCGI-серверу | |
| с помощью error_page или try_files; | |
| ошибка появилась в 0.7.44. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in worker process, | |
| if a request was redirected to a proxied or FastCGI server via | |
| error_page or try_files; | |
| the bug had appeared in 0.7.44. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.46" date="2009-03-30"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| архив предыдущего релиза был неверным. | |
| </para> | |
| <para lang="en"> | |
| the previous release tarball was incorrect. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.45" date="2009-03-30"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь директивы proxy_cache и proxy_cache_valid можно задавать | |
| на разных уровнях. | |
| </para> | |
| <para lang="en"> | |
| now the "proxy_cache" and the "proxy_cache_valid" directives can be set on | |
| different levels. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| параметр clean_time в директиве proxy_cache_path удалён. | |
| </para> | |
| <para lang="en"> | |
| the "clean_time" parameter of the "proxy_cache_path" directive is canceled. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр max_size в директиве proxy_cache_path. | |
| </para> | |
| <para lang="en"> | |
| the "max_size" parameter of the "proxy_cache_path" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| предварительная поддержка кэширования в модуле ngx_http_fastcgi_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_fastcgi_module preliminary cache support. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь при ошибках выделения в разделяемой памяти в логе указываются | |
| названия директивы и зоны. | |
| </para> | |
| <para lang="en"> | |
| now on shared memory allocation errors directive and zone names are logged. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива "add_header last-modified ''" не удаляла в заголовке ответа | |
| строку "Last-Modified"; | |
| ошибка появилась в 0.7.44. | |
| </para> | |
| <para lang="en"> | |
| the directive "add_header last-modified ''" did not delete a "Last-Modified" | |
| response header line; | |
| the bug had appeared in 0.7.44. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве auth_basic_user_file не работал относительный путь, | |
| заданный строкой без переменных; | |
| ошибка появилась в 0.7.44.<br/> | |
| Спасибо Jerome Loyet. | |
| </para> | |
| <para lang="en"> | |
| a relative path in the "auth_basic_user_file" directive given without variables | |
| did not work; | |
| the bug had appeared in 0.7.44.<br/> | |
| Thanks to Jerome Loyet. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве alias, заданной переменными | |
| без ссылок на выделения в регулярных выражениях; | |
| ошибка появилась в 0.7.42. | |
| </para> | |
| <para lang="en"> | |
| in an "alias" directive given using variables | |
| without references to captures of regular expressions; | |
| the bug had appeared in 0.7.42. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.44" date="2009-03-23"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| предварительная поддержка кэширования в модуле ngx_http_proxy_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_proxy_module preliminary cache support. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр --with-pcre в configure. | |
| </para> | |
| <para lang="en"> | |
| the --with-pcre option in the configure. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь директива try_files может быть использована на уровне server. | |
| </para> | |
| <para lang="en"> | |
| the "try_files" directive is now allowed on the server block level. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива try_files неправильно обрабатывала строку запроса в последнем | |
| параметре. | |
| </para> | |
| <para lang="en"> | |
| the "try_files" directive handled incorrectly a query string | |
| in a fallback parameter. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива try_files могла неверно тестировать каталоги. | |
| </para> | |
| <para lang="en"> | |
| the "try_files" directive might test incorrectly directories. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если для пары адрес:порт описан только один сервер, то выделения | |
| в регулярных выражениях в директиве server_name не работали. | |
| </para> | |
| <para lang="en"> | |
| if there was a single server for given address:port pair, | |
| then captures in regular expressions in a "server_name" directive did not work. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.43" date="2009-03-18"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| запрос обрабатывался неверно, если директива root использовала переменные; | |
| ошибка появилась в 0.7.42. | |
| </para> | |
| <para lang="en"> | |
| a request was handled incorrectly, if a "root" directive used variables; | |
| the bug had appeared in 0.7.42. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если сервер слушал на адресах типа "*", то значение переменной $server_addr | |
| было "0.0.0.0"; | |
| ошибка появилась в 0.7.36. | |
| </para> | |
| <para lang="en"> | |
| if a server listened on wildcard address, then the $server_addr variable | |
| value was "0.0.0.0"; | |
| the bug had appeared in 0.7.36. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.42" date="2009-03-16"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| ошибка "Invalid argument", возвращаемая setsockopt(TCP_NODELAY) на Solaris, | |
| теперь игнорируется. | |
| </para> | |
| <para lang="en"> | |
| now the "Invalid argument" error returned by setsockopt(TCP_NODELAY) on Solaris, | |
| is ignored. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| при отсутствии файла, указанного в директиве auth_basic_user_file, | |
| теперь возвращается ошибка 403 вместо 500. | |
| </para> | |
| <para lang="en"> | |
| now if a file specified in a "auth_basic_user_file" directive is absent, | |
| then the 403 error is returned instead of the 500 one. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива auth_basic_user_file поддерживает переменные. | |
| <br/> | |
| Спасибо Кириллу Коринскому. | |
| </para> | |
| <para lang="en"> | |
| the "auth_basic_user_file" directive supports variables.<br/> | |
| Thanks to Kirill A. Korinskiy. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива listen поддерживает параметр ipv6only.<br/> | |
| Спасибо Zhang Hua. | |
| </para> | |
| <para lang="en"> | |
| the "listen" directive supports the "ipv6only" parameter. | |
| <br/> | |
| Thanks to Zhang Hua. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве alias со ссылками на выделения в регулярных выражениях; | |
| ошибка появилась в 0.7.40. | |
| </para> | |
| <para lang="en"> | |
| in an "alias" directive with references to captures of regular expressions; | |
| the bug had appeared in 0.7.40. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| совместимость с Tru64 UNIX.<br/> | |
| Спасибо Dustin Marquess. | |
| </para> | |
| <para lang="en"> | |
| compatibility with Tru64 UNIX.<br/> | |
| Thanks to Dustin Marquess. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался без библиотеки PCRE; | |
| ошибка появилась в 0.7.41. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built without PCRE library; | |
| the bug had appeared in 0.7.41. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.41" date="2009-03-11"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если в server_name или location были выделения в регулярных выражениях; | |
| ошибка появилась в 0.7.40.<br/> | |
| Спасибо Владимиру Сопоту. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in worker process, | |
| if a "server_name" or a "location" directives had captures | |
| in regular expressions; | |
| the issue had appeared in 0.7.40.<br/> | |
| Thanks to Vladimir Sopot. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.40" date="2009-03-09"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива location поддерживает выделения в регулярных выражениях. | |
| </para> | |
| <para lang="en"> | |
| the "location" directive supports captures in regular expressions. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директиву alias с ссылками на выделения в регулярных выражениях | |
| можно использовать внутри location'а, заданного регулярным выражением | |
| с выделениями. | |
| </para> | |
| <para lang="en"> | |
| an "alias" directive with capture references may be used inside | |
| a location given by a regular expression with captures. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива server_name поддерживает выделения в регулярных выражениях. | |
| </para> | |
| <para lang="en"> | |
| the "server_name" directive supports captures in regular expressions. | |
| </para> | |
| </change> | |
| <change type="workaround"> | |
| <para lang="ru"> | |
| модуль ngx_http_autoindex_module не показывал последний слэш для каталогов | |
| на файловой системе XFS; | |
| ошибка появилась в 0.7.15.<br/> | |
| Спасибо Дмитрию Кузьменко. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_autoindex_module did not show the trailing slash in directories | |
| on XFS filesystem; | |
| the issue had appeared in 0.7.15.<br/> | |
| Thanks to Dmitry Kuzmenko. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.39" date="2009-03-02"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при включённом сжатии большие ответы с использованием SSI могли зависать; | |
| ошибка появилась в 0.7.28.<br/> | |
| Спасибо Артёму Бохану. | |
| </para> | |
| <para lang="en"> | |
| large response with SSI might hang, if gzipping was enabled; | |
| the bug had appeared in 0.7.28.<br/> | |
| Thanks to Artem Bokhan. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании коротких статических вариантов в директиве try_files | |
| в рабочем процессе мог произойти segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in worker process, | |
| if short static variants are used in a "try_files" directive. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.38" date="2009-02-23"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| логгирование ошибок аутентификации. | |
| </para> | |
| <para lang="en"> | |
| authentication failures logging. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| имя/пароль, заданные в auth_basic_user_file, игнорировались после нечётного | |
| числа пустых строк.<br/> | |
| Спасибо Александру Загребину. | |
| </para> | |
| <para lang="en"> | |
| name/password in auth_basic_user_file were ignored after odd number | |
| of empty lines.<br/> | |
| Thanks to Alexander Zagrebin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании длинного пути в unix domain сокете | |
| в главном процессе происходил segmentation fault; | |
| ошибка появилась в 0.7.36. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault occurred in a master process, | |
| if long path was used in unix domain socket; | |
| the bug had appeared in 0.7.36. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.37" date="2009-02-21"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директивы, использующие upstream'ы, не работали; | |
| ошибка появилась в 0.7.36. | |
| </para> | |
| <para lang="en"> | |
| directives using upstreams did not work; | |
| the bug had appeared in 0.7.36. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.36" date="2009-02-21"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| предварительная поддержка IPv6; | |
| директива listen модуля HTTP поддерживает IPv6. | |
| </para> | |
| <para lang="en"> | |
| a preliminary IPv6 support; | |
| the "listen" directive of the HTTP module supports IPv6. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| переменная $ancient_browser не работала для браузеров, заданных | |
| директивами modern_browser. | |
| </para> | |
| <para lang="en"> | |
| the $ancient_browser variable did not work for browsers | |
| preset by a "modern_browser" directives. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.35" date="2009-02-16"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива ssl_engine не использовала SSL-акселератор | |
| для асимметричных шифров.<br/> | |
| Спасибо Marcin Gozdalik. | |
| </para> | |
| <para lang="en"> | |
| a "ssl_engine" directive did not use a SSL-accelerator | |
| for asymmetric ciphers.<br/> | |
| Thanks to Marcin Gozdalik. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива try_files выставляла MIME-type, исходя из расширения | |
| первоначального запроса. | |
| </para> | |
| <para lang="en"> | |
| a "try_files" directive set MIME type depending on an | |
| original request extension. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директивах server_name, valid_referers и map | |
| неправильно обрабатывались имена вида "*domain.tld", | |
| если использовались маски вида ".domain.tld" и ".subdomain.domain.tld"; | |
| ошибка появилась в 0.7.9. | |
| </para> | |
| <para lang="en"> | |
| "*domain.tld" names were handled incorrectly in | |
| "server_name", "valid_referers", and "map" directives, | |
| if ".domain.tld" and ".subdomain.domain.tld" wildcards were used; | |
| <nobr>the bug had</nobr> appeared in 0.7.9. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.34" date="2009-02-10"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр off в директиве if_modified_since. | |
| </para> | |
| <para lang="en"> | |
| the "off" parameter of the "if_modified_since" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь после команды XCLIENT nginx посылает команду HELO/EHLO.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| now nginx sends an HELO/EHLO command after a XCLIENT command.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка Microsoft-специфичного режима | |
| <nobr>"AUTH LOGIN with User Name"</nobr> | |
| в почтовом прокси-сервере.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| Microsoft specific "AUTH LOGIN with User Name" mode support | |
| in mail proxy server.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве rewrite, возвращающей редирект, старые аргументы присоединялись | |
| к новым через символ "?" вместо "&";<br/> | |
| ошибка появилась в 0.1.18.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| in a redirect rewrite directive original arguments were concatenated with | |
| new arguments by a "?" rather than an "&";<br/> | |
| the bug had appeared in 0.1.18.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на AIX. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on AIX. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.33" date="2009-02-02"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если на запрос с телом возвращался редирект, то ответ мог быть двойным | |
| при использовании методов epoll или rtsig.<br/> | |
| Спасибо Eden Li. | |
| </para> | |
| <para lang="en"> | |
| a double response might be returned if the epoll or rtsig methods are used | |
| and a redirect was returned to a request with body.<br/> | |
| Thanks to Eden Li. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| для некоторых типов редиректов в переменной $sent_http_location | |
| было пустое значение. | |
| </para> | |
| <para lang="en"> | |
| the $sent_http_location variable was empty for some redirects types. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы resolver в SMTP прокси-сервере | |
| в рабочем процессе мог произойти segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in worker process | |
| if "resolver" directive was used in SMTP proxy. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.32" date="2009-01-26"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь в директиве try_files можно явно указать проверку каталога. | |
| </para> | |
| <para lang="en"> | |
| now a directory existence testing can be set explicitly | |
| in the "try_files" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| fastcgi_store не всегда сохранял файлы. | |
| </para> | |
| <para lang="en"> | |
| fastcgi_store stored files not always. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в гео-диапазонах. | |
| </para> | |
| <para lang="en"> | |
| in geo ranges. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки выделения больших блоков в разделяемой памяти, | |
| если nginx был собран без отладки.<br/> | |
| Спасибо Андрею Квасову. | |
| </para> | |
| <para lang="en"> | |
| in shared memory allocations if nginx was built without debugging.<br/> | |
| Thanks to Andrey Kvasov. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.31" date="2009-01-19"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь директива try_files проверяет только файлы, игнорируя каталоги. | |
| </para> | |
| <para lang="en"> | |
| now the "try_files" directive tests files only and ignores directories. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива fastcgi_split_path_info. | |
| </para> | |
| <para lang="en"> | |
| the "fastcgi_split_path_info" directive. | |
| </para> | |
| </change> | |
| <change> | |
| <para lang="ru"> | |
| Исправления в поддержке строки "Expect" в заголовке запроса. | |
| </para> | |
| <para lang="en"> | |
| Bugfixes in an "Expect" request header line support. | |
| </para> | |
| </change> | |
| <change> | |
| <para lang="ru"> | |
| Исправления в гео-диапазонах. | |
| </para> | |
| <para lang="en"> | |
| Bugfixes in geo ranges. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при отсутствии ответа ngx_http_memcached_module возвращал | |
| в теле ответа строку "END" вместо 404-ой страницы по умолчанию; | |
| ошибка появилась в 0.7.18.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| in a miss case ngx_http_memcached_module returned the "END" line | |
| as response body instead of default 404 page body; | |
| the bug had appeared in 0.7.18.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при проксировании SMTP nginx выдавал сообщение | |
| <nobr>"250 2.0.0 OK"</nobr> вместо "235 2.0.0 OK"; | |
| ошибка появилась в 0.7.22.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| while SMTP proxying nginx issued message | |
| "250 2.0.0 OK" instead of "235 2.0.0 OK"; | |
| the bug had appeared in 0.7.22.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.30" date="2008-12-24"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе происходил segmentation fault, | |
| если в директивах fastcgi_pass или proxy_pass | |
| использовались переменные и имя хоста должно было резолвиться; | |
| ошибка появилась в 0.7.29. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault occurred in worker process, | |
| if variables were used in the "fastcgi_pass" or "proxy_pass" directives | |
| and host name must be resolved; | |
| the bug had appeared in 0.7.29. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.29" date="2008-12-24"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директивы fastcgi_pass и proxy_pass не поддерживали переменные | |
| при использовании unix domain сокетов. | |
| </para> | |
| <para lang="en"> | |
| the "fastcgi_pass" and "proxy_pass" directives did not support | |
| variables if unix domain sockets were used. | |
| </para> | |
| </change> | |
| <change> | |
| <para lang="ru"> | |
| Исправления в обработке подзапросов; | |
| ошибки появились в 0.7.25. | |
| </para> | |
| <para lang="en"> | |
| Bugfixes in subrequest processing; | |
| the bugs had appeared in 0.7.25. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ответ "100 Continue" выдавался для запросов версии HTTP/1.0;<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| a "100 Continue" response was issued for HTTP/1.0 requests;<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в выделении памяти в модуле ngx_http_gzip_filter_module под Cygwin. | |
| </para> | |
| <para lang="en"> | |
| in memory allocation in the ngx_http_gzip_filter_module on Cygwin. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.28" date="2008-12-22"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| в выделении памяти в модуле ngx_http_gzip_filter_module. | |
| </para> | |
| <para lang="en"> | |
| in memory allocation in the ngx_http_gzip_filter_module. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| значения по умолчанию для директивы gzip_buffers изменены с 4 4k/8k | |
| на 32 4k или 16 8k. | |
| </para> | |
| <para lang="en"> | |
| the default "gzip_buffers" directive values have been changed | |
| to 32 4k or 16 8k from 4 4k/8k. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.27" date="2008-12-15"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива try_files. | |
| </para> | |
| <para lang="en"> | |
| the "try_files" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива fastcgi_pass поддерживает переменные. | |
| </para> | |
| <para lang="en"> | |
| variables support in the "fastcgi_pass" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь директива geo может брать адрес из переменной.<br/> | |
| Спасибо Андрею Нигматулину. | |
| </para> | |
| <para lang="en"> | |
| now the $geo variable may get an address from a variable.<br/> | |
| Thanks to Andrei Nigmatulin. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь модификатор location'а можно указывать без пробела перед названием. | |
| </para> | |
| <para lang="en"> | |
| now a location's modifier may be used without space before name. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $upstream_response_length. | |
| </para> | |
| <para lang="en"> | |
| the $upstream_response_length variable. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| теперь директива add_header не добавляет пустое значение. | |
| </para> | |
| <para lang="en"> | |
| now a "add_header" directive does not add an empty value. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при запросе файла нулевой длины nginx закрывал соединение, ничего не передав; | |
| ошибка появилась в 0.7.25. | |
| </para> | |
| <para lang="en"> | |
| if zero length static file was requested, then nginx just closed connection; | |
| the bug had appeared in 0.7.25. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| метод MOVE не мог перемещать файл в несуществующий каталог. | |
| </para> | |
| <para lang="en"> | |
| a MOVE method could not move file in non-existent directory. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если в сервере не был описан ни один именованный location, | |
| но такой location использовался в директиве error_page, | |
| то в рабочем процессе происходил segmentation fault.<br/> | |
| Спасибо Сергею Боченкову. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault occurred in worker process, | |
| if no one named location was defined in server, | |
| but some one was used in an error_page directive.<br/> | |
| Thanks to Sergey Bochenkov. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.26" date="2008-12-08"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в обработке подзапросов; | |
| ошибка появилась в 0.7.25. | |
| </para> | |
| <para lang="en"> | |
| in subrequest processing; | |
| the bug had appeared in 0.7.25. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.25" date="2008-12-08"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| в обработке подзапросов. | |
| </para> | |
| <para lang="en"> | |
| in subrequest processing. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь разрешаются POST'ы без строки "Content-Length" в заголовке запроса. | |
| </para> | |
| <para lang="en"> | |
| now POSTs without "Content-Length" header line are allowed. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| теперь директивы limit_req и limit_conn указывают причину запрета запроса. | |
| </para> | |
| <para lang="en"> | |
| now the "limit_req" and "limit_conn" directives log a prohibition reason. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в параметре delete директивы geo. | |
| </para> | |
| <para lang="en"> | |
| in the "delete" parameter of the "geo" directive. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.24" date="2008-12-01"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива if_modified_since. | |
| </para> | |
| <para lang="en"> | |
| the "if_modified_since" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не обрабатывал ответ FastCGI-сервера, | |
| если перед ответом сервер передавал много сообщений в stderr. | |
| </para> | |
| <para lang="en"> | |
| nginx did not process a FastCGI server response, | |
| if the server send too many messages to stderr before response. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| переменные "$cookie_..." не работали в SSI and в перловом модуле. | |
| </para> | |
| <para lang="en"> | |
| the "$cookie_..." variables did not work in the SSI and the perl module. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.23" date="2008-11-27"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметры delete и ranges в директиве geo. | |
| </para> | |
| <para lang="en"> | |
| the "delete" and "ranges" parameters in the "geo" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| ускорение загрузки geo-базы с большим числом значений. | |
| </para> | |
| <para lang="en"> | |
| speeding up loading of geo base with large number of values. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| уменьшение памяти, необходимой для загрузки geo-базы. | |
| </para> | |
| <para lang="en"> | |
| decrease of memory required for geo base load. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.22" date="2008-11-20"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр none в директиве smtp_auth.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| the "none" parameter in the "smtp_auth" directive.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменные "$cookie_...". | |
| </para> | |
| <para lang="en"> | |
| the "$cookie_..." variables. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива directio не работала с файловой системой XFS. | |
| </para> | |
| <para lang="en"> | |
| the "directio" directive did not work in XFS filesystem. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| resolver не понимал большие DNS-ответы.<br/> | |
| Спасибо Zyb. | |
| </para> | |
| <para lang="en"> | |
| the resolver did not understand big DNS responses.<br/> | |
| Thanks to Zyb. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.21" date="2008-11-11"> | |
| <change> | |
| <para lang="ru"> | |
| Изменения в модуле ngx_http_limit_req_module. | |
| </para> | |
| <para lang="en"> | |
| Changes in the ngx_http_limit_req_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка EXSLT в модуле ngx_http_xslt_module.<br/> | |
| Спасибо Денису Латыпову. | |
| </para> | |
| <para lang="en"> | |
| the EXSLT support in the ngx_http_xslt_module.<br/> | |
| Thanks to Denis F. Latypoff. | |
| </para> | |
| </change> | |
| <change type="workaround"> | |
| <para lang="ru"> | |
| совместимость с glibc 2.3.<br/> | |
| Спасибо Eric Benson и Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| compatibility with glibc 2.3.<br/> | |
| Thanks to Eric Benson and Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не запускался на MacOSX 10.4 и более ранних; | |
| ошибка появилась в 0.7.6. | |
| </para> | |
| <para lang="en"> | |
| nginx could not run on MacOSX 10.4 and earlier; | |
| the bug had appeared in 0.7.6. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.20" date="2008-11-10"> | |
| <change> | |
| <para lang="ru"> | |
| Изменения в модуле ngx_http_gzip_filter_module. | |
| </para> | |
| <para lang="en"> | |
| Changes in the ngx_http_gzip_filter_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_limit_req_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_limit_req_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| на платформах sparc и ppc рабочие процессы могли выходить по сигналу SIGBUS; | |
| ошибка появилась в 0.7.3.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| worker processes might exit on a SIGBUS signal on sparc and ppc platforms; | |
| the bug had appeared in 0.7.3.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директивы вида "proxy_pass http://host/some:uri" не работали; | |
| ошибка появилась в 0.7.12. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_pass http://host/some:uri" directives did not work; | |
| the bug had appeared in 0.7.12. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании HTTPS запросы могли завершаться с ошибкой "bad write retry". | |
| </para> | |
| <para lang="en"> | |
| in HTTPS mode requests might fail with the "bad write retry" error. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_secure_link_module не работал внутри location'ов | |
| с именами меньше 3 символов. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_secure_link_module did not work inside locations, | |
| whose names are less than 3 characters. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| переменная $server_addr могла не иметь значения. | |
| </para> | |
| <para lang="en"> | |
| $server_addr variable might have no value. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.19" date="2008-10-13"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| обновление номера версии. | |
| </para> | |
| <para lang="en"> | |
| version number update. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.18" date="2008-10-13"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| директива underscores_in_headers; | |
| теперь nginx по умолчанию не разрешает подчёркивания в именах строк | |
| в заголовке запроса клиента. | |
| </para> | |
| <para lang="en"> | |
| the "underscores_in_headers" directive; | |
| now nginx does not allows underscores in a client request header line names. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_secure_link_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_secure_link_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива real_ip_header поддерживает любой заголовок. | |
| </para> | |
| <para lang="en"> | |
| the "real_ip_header" directive supports any header. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива log_subrequest. | |
| </para> | |
| <para lang="en"> | |
| the "log_subrequest" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $realpath_root. | |
| </para> | |
| <para lang="en"> | |
| the $realpath_root variable. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметры http_502 и http_504 в директиве proxy_next_upstream. | |
| </para> | |
| <para lang="en"> | |
| the "http_502" and "http_504" parameters of the "proxy_next_upstream" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| параметр http_503 в директивах proxy_next_upstream или fastcgi_next_upstream | |
| не работал. | |
| </para> | |
| <para lang="en"> | |
| the "http_503" parameter of the "proxy_next_upstream" or | |
| "fastcgi_next_upstream" directives did not work. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx мог выдавать строку "Transfer-Encoding: chunked" для запросов HEAD. | |
| </para> | |
| <para lang="en"> | |
| nginx might send a "Transfer-Encoding: chunked" header line for HEAD requests. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| теперь accept-лимит зависит от числа worker_connections. | |
| </para> | |
| <para lang="en"> | |
| now accept threshold depends on worker_connections. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.17" date="2008-09-15"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива directio теперь работает на Linux. | |
| </para> | |
| <para lang="en"> | |
| now the "directio" directive works on Linux. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $pid. | |
| </para> | |
| <para lang="en"> | |
| the $pid variable. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| оптимизация directio, появившаяся в 0.7.15, не работала при использовании | |
| open_file_cache. | |
| </para> | |
| <para lang="en"> | |
| the "directio" optimization that had appeared in 0.7.15 did not work with | |
| open_file_cache. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| access_log с переменными не работал на Linux; | |
| ошибка появилась в 0.7.7. | |
| </para> | |
| <para lang="en"> | |
| the "access_log" with variables did not work on Linux; | |
| the bug had appeared in 0.7.7. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_charset_module не понимал название кодировки в кавычках, | |
| полученное от бэкенда. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_charset_module did not understand quoted charset name | |
| received from backend. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.16" date="2008-09-08"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на 64-битных платформах; | |
| ошибка появилась в 0.7.15. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on 64-bit platforms; | |
| the bug had appeared in 0.7.15. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.15" date="2008-09-08"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_random_index_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_random_index_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива directio оптимизирована для запросов файлов, начинающихся | |
| с произвольной позиции. | |
| </para> | |
| <para lang="en"> | |
| the "directio" directive has been optimized for file requests starting | |
| from arbitrary position. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива directio при необходимости запрещает использование sendfile. | |
| </para> | |
| <para lang="en"> | |
| the "directio" directive turns off sendfile if it is necessary. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь nginx разрешает подчёркивания в именах строк в заголовке запроса клиента. | |
| </para> | |
| <para lang="en"> | |
| now nginx allows underscores in a client request header line names. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.14" date="2008-09-01"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь директивы ssl_certificate и ssl_certificate_key не имеют | |
| значений по умолчанию. | |
| </para> | |
| <para lang="en"> | |
| now the ssl_certificate and ssl_certificate_key directives have no | |
| default values. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива listen поддерживает параметр ssl. | |
| </para> | |
| <para lang="en"> | |
| the "listen" directive supports the "ssl" parameter. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь при переконфигурации nginx учитывает изменение временной зоны | |
| на FreeBSD и Linux. | |
| </para> | |
| <para lang="en"> | |
| now nginx takes into account a time zone change while reconfiguration | |
| on FreeBSD and Linux. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| параметры директивы listen, такие как backlog, rcvbuf и прочие, | |
| не устанавливались, если сервером по умолчанию был не первый сервер. | |
| </para> | |
| <para lang="en"> | |
| the "listen" directive parameters such as "backlog", "rcvbuf", etc. | |
| were not set, if a default server was not the first one. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании в качестве аргументов части URI, выделенного с помощью | |
| директивы rewrite, эти аргументы не экранировались. | |
| </para> | |
| <para lang="en"> | |
| if URI part captured by a "rewrite" directive was used as a query string, | |
| then the query string was not escaped. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| улучшения тестирования правильности конфигурационного файла. | |
| </para> | |
| <para lang="en"> | |
| configuration file validity test improvements. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.13" date="2008-08-26"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на Linux и Solaris; | |
| ошибка появилась в 0.7.12. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on Linux and Solaris; | |
| the bug had appeared in 0.7.12. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.12" date="2008-08-26"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива server_name поддерживает пустое имя "". | |
| </para> | |
| <para lang="en"> | |
| the "server_name" directive supports empty name "". | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива gzip_disable поддерживает специальную маску msie6. | |
| </para> | |
| <para lang="en"> | |
| the "gzip_disable" directive supports special "msie6" mask. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании параметра max_fails=0 в upstream'е с несколькими | |
| серверами рабочий процесс выходил по сигналу SIGFPE.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| if the "max_fails=0" parameter was used in upstream with several servers, | |
| then a worker process exited on a SIGFPE signal.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при перенаправлении запроса с помощью директивы error_page | |
| терялось тело запроса. | |
| </para> | |
| <para lang="en"> | |
| a request body was dropped while redirection via an "error_page" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при перенаправлении запроса с методом HEAD с помощью директивы error_page | |
| возвращался полный ответ. | |
| </para> | |
| <para lang="en"> | |
| a full response was returned for request method HEAD | |
| while redirection via an "error_page" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| метод $r->header_in() не возвращал значения строк "Host", "User-Agent", | |
| и "Connection" из заголовка запроса; | |
| ошибка появилась в 0.7.0. | |
| </para> | |
| <para lang="en"> | |
| the $r->header_in() method did not return value of the "Host", | |
| "User-Agent", and "Connection" request header lines; | |
| the bug had appeared in 0.7.0. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.11" date="2008-08-18"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь ngx_http_charset_module по умолчанию не работает MIME-типом text/css. | |
| </para> | |
| <para lang="en"> | |
| now ngx_http_charset_module does not work by default with text/css MIME type. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь nginx возвращает код 405 для метода POST при запросе статического | |
| файла, только если файл существует. | |
| </para> | |
| <para lang="en"> | |
| now nginx returns the 405 status code for POST method requesting a static file | |
| only if the file exists. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива proxy_ssl_session_reuse. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_ssl_session_reuse" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| после перенаправления запроса с помощью "X-Accel-Redirect" | |
| директива proxy_pass без URI могла использовать оригинальный запрос. | |
| </para> | |
| <para lang="en"> | |
| a "proxy_pass" directive without URI part might use original request | |
| after the "X-Accel-Redirect" redirection was used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если у каталога были права доступа только на поиск файлов | |
| и первый индексный файл отсутствовал, то nginx возвращал ошибку 500. | |
| </para> | |
| <para lang="en"> | |
| if a directory has search only rights and the first index file was absent, | |
| then nginx returned the 500 status code. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибок во вложенных location'ах; | |
| ошибки появились в 0.7.1. | |
| </para> | |
| <para lang="en"> | |
| in inclusive locations; | |
| the bugs had appeared in 0.7.1. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.10" date="2008-08-13"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибок в директивах addition_types, charset_types, | |
| gzip_types, ssi_types, sub_filter_types и xslt_types; | |
| ошибки появились в 0.7.9. | |
| </para> | |
| <para lang="en"> | |
| in the "addition_types", "charset_types", | |
| "gzip_types", "ssi_types", "sub_filter_types", and "xslt_types" directives; | |
| the bugs had appeared in 0.7.9. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| рекурсивной error_page для 500 ошибки. | |
| </para> | |
| <para lang="en"> | |
| of recursive error_page for 500 status code. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| теперь модуль ngx_http_realip_module устанавливает адрес не для | |
| всего keepalive соединения, а для каждого запроса по этому соединению. | |
| </para> | |
| <para lang="en"> | |
| now the ngx_http_realip_module sets address not for whole keepalive connection, | |
| but for each request passed via the connection. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.9" date="2008-08-12"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь ngx_http_charset_module по умолчанию работает со следующими MIME-типами: | |
| text/html, text/css, text/xml, text/plain, text/vnd.wap.wml, | |
| application/x-javascript и application/rss+xml. | |
| </para> | |
| <para lang="en"> | |
| now ngx_http_charset_module works by default with following MIME types: | |
| text/html, text/css, text/xml, text/plain, text/vnd.wap.wml, | |
| application/x-javascript, and application/rss+xml. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы charset_types и addition_types. | |
| </para> | |
| <para lang="en"> | |
| the "charset_types" and "addition_types" directives. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь директивы gzip_types, ssi_types и sub_filter_types используют хэш. | |
| </para> | |
| <para lang="en"> | |
| now the "gzip_types", "ssi_types", and "sub_filter_types" directives use hash. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_cpp_test_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_cpp_test_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива expires поддерживает суточное время. | |
| </para> | |
| <para lang="en"> | |
| the "expires" directive supports daily time. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| улучшения и исправления в модуле ngx_http_xslt_module.<br/> | |
| Спасибо Денису Латыпову и Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_xslt_module improvements and bug fixing.<br/> | |
| Thanks to Denis F. Latypoff and Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива log_not_found не работала при поиске индексных файлов. | |
| </para> | |
| <para lang="en"> | |
| the "log_not_found" directive did not work for index files tests. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| HTTPS-соединения могли зависнуть, | |
| если использовались методы kqueue, epoll, rtsig или eventport; | |
| ошибка появилась в 0.7.7. | |
| </para> | |
| <para lang="en"> | |
| HTTPS connections might hang, | |
| if kqueue, epoll, rtsig, or eventport methods were used; | |
| the bug had appeared in 0.7.7. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если в директивах server_name, valid_referers и map | |
| использовалась маска вида "*.domain.tld" и при этом полное имя | |
| вида "domain.tld" не было описано, то это имя попадало под маску; | |
| ошибка появилась в 0.3.18. | |
| </para> | |
| <para lang="en"> | |
| if the "server_name", "valid_referers", and "map" directives used | |
| an "*.domain.tld" wildcard and exact name "domain.tld" was not set, | |
| then the exact name was matched by the wildcard; | |
| the bug had appeared in 0.3.18. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.8" date="2008-08-04"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_xslt_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_xslt_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменные "$arg_...". | |
| </para> | |
| <para lang="en"> | |
| the "$arg_..." variables. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка directio в Solaris.<br/> | |
| Спасибо Ivan Debnar. | |
| </para> | |
| <para lang="en"> | |
| Solaris directio support.<br/> | |
| Thanks to Ivan Debnar. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| теперь, если FastCGI-сервер присылает строку "Location" в заголовке ответа | |
| без строки статуса, то nginx использует код статуса 302.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| now if FastCGI server sends a "Location" header line without status line, | |
| then nginx uses 302 status code.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.7" date="2008-07-30"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь ошибка EAGAIN при вызове connect() не считается временной. | |
| </para> | |
| <para lang="en"> | |
| now the EAGAIN error returned by connect() is not considered as temporary error. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| значением переменной $ssl_client_cert теперь является сертификат, | |
| перед каждой строкой которого, кроме первой, вставляется символ табуляции; | |
| неизменённый сертификат доступен через переменную $ssl_client_raw_cert. | |
| </para> | |
| <para lang="en"> | |
| now the $ssl_client_cert variable value is a certificate with TAB character | |
| intended before each line except first one; | |
| an unchanged certificate is available in the $ssl_client_raw_cert variable. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр ask директивы ssl_verify_client. | |
| </para> | |
| <para lang="en"> | |
| the "ask" parameter in the "ssl_verify_client" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| улучшения в обработке byte-range.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| byte-range processing improvements.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива directio.<br/> | |
| Спасибо Jiang Hong. | |
| </para> | |
| <para lang="en"> | |
| the "directio" directive.<br/> | |
| Thanks to Jiang Hong. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка sendfile() в MacOSX 10.5. | |
| </para> | |
| <para lang="en"> | |
| MacOSX 10.5 sendfile() support. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в MacOSX и Cygwin при проверке location'ов теперь делается сравнение | |
| без учёта регистра символов; | |
| однако, сравнение ограничено только однобайтными locale'ями. | |
| </para> | |
| <para lang="en"> | |
| now in MacOSX and Cygwin locations are tested in case insensitive mode; | |
| however, the compare is provided by single-byte locales only. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| соединения почтового прокси-сервера зависали в режиме SSL, | |
| если использовались методы select, poll или /dev/poll. | |
| </para> | |
| <para lang="en"> | |
| mail proxy SSL connections hanged, | |
| if select, poll, or /dev/poll methods were used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки при использовании кодировки UTF-8 в ngx_http_autoindex_module. | |
| </para> | |
| <para lang="en"> | |
| UTF-8 encoding usage in the ngx_http_autoindex_module. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.6" date="2008-07-07"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| теперь при использовании переменных в директиве access_log | |
| всегда проверяется существовании root'а для запроса. | |
| </para> | |
| <para lang="en"> | |
| now if variables are used in the "access_log" directive | |
| a request root existence is always tested. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_flv_module не поддерживал несколько значений в | |
| аргументах запроса. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_flv_module did not support several values in a query string. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.5" date="2008-07-01"> | |
| <change> | |
| <para lang="ru"> | |
| Исправления в поддержке переменных в директиве access_log; | |
| ошибки появились в 0.7.4. | |
| </para> | |
| <para lang="en"> | |
| Bugfixes in variables support in the "access_log" directive; | |
| the bugs had appeared in 0.7.4. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался с параметром --without-http_gzip_module; | |
| ошибка появилась в 0.7.3.<br/> | |
| Спасибо Кириллу Коринскому. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built --without-http_gzip_module; | |
| the bug had appeared in 0.7.3.<br/> | |
| Thanks to Kirill A. Korinskiy. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при совместном использовании sub_filter и SSI | |
| ответы могли передаваться неверно. | |
| </para> | |
| <para lang="en"> | |
| if sub_filter and SSI were used together, then responses might | |
| were transferred incorrectly. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.4" date="2008-06-30"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива access_log поддерживает переменные. | |
| </para> | |
| <para lang="en"> | |
| variables support in the "access_log" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива open_log_file_cache. | |
| </para> | |
| <para lang="en"> | |
| the "open_log_file_cache" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| ключ -g. | |
| </para> | |
| <para lang="en"> | |
| the -g switch. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка строки "Expect" в заголовке запроса. | |
| </para> | |
| <para lang="en"> | |
| the "Expect" request header line support. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| большие включения в SSI могли передавались не полностью. | |
| </para> | |
| <para lang="en"> | |
| large SSI inclusions might be truncated. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.3" date="2008-06-23"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| MIME-тип для расширения rss изменён на "application/rss+xml". | |
| </para> | |
| <para lang="en"> | |
| the "rss" extension MIME type has been changed to "application/rss+xml". | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь директива "gzip_vary on" выдаёт строку | |
| <nobr>"Vary: Accept-Encoding"</nobr> | |
| в заголовке ответа и для несжатых ответов. | |
| </para> | |
| <para lang="en"> | |
| now the "gzip_vary" directive turned on issues | |
| a <nobr>"Vary: Accept-Encoding"</nobr> | |
| header line for uncompressed responses too. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь при использовании протокола "https://" в директиве rewrite | |
| автоматически делается редирект. | |
| </para> | |
| <para lang="en"> | |
| now the "rewrite" directive does a redirect automatically | |
| if the "https://" protocol is used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива proxy_pass не работала с протоколом HTTPS; | |
| ошибка появилась в 0.6.9. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_pass" directive did not work with the HTTPS protocol; | |
| the bug had appeared in 0.6.9. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.2" date="2008-06-16"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь nginx поддерживает шифры с обменом EDH-ключами. | |
| </para> | |
| <para lang="en"> | |
| now nginx supports EDH key exchange ciphers. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива ssl_dhparam. | |
| </para> | |
| <para lang="en"> | |
| the "ssl_dhparam" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $ssl_client_cert.<br/> | |
| Спасибо Manlio Perillo. | |
| </para> | |
| <para lang="en"> | |
| the $ssl_client_cert variable.<br/> | |
| Thanks to Manlio Perillo. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| после изменения URI с помощью директивы rewrite nginx не искал новый location; | |
| ошибка появилась в 0.7.1.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| after changing URI via a "rewrite" directive nginx did not search | |
| a new location; | |
| the bug had appeared in 0.7.1.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался без библиотеки PCRE; | |
| ошибка появилась в 0.7.1. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built without PCRE library; | |
| the bug had appeared in 0.7.1. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при редиректе запроса к каталогу с добавлением слэша nginx | |
| не добавлял аргументы из оригинального запроса. | |
| </para> | |
| <para lang="en"> | |
| when a request to a directory was redirected with the slash added, | |
| nginx dropped a query string from the original request. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.1" date="2008-05-26"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь поиск location'а делается с помощью дерева. | |
| </para> | |
| <para lang="en"> | |
| now locations are searched in a tree. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| директива optimize_server_names упразднена в связи с появлением | |
| директивы server_name_in_redirect. | |
| </para> | |
| <para lang="en"> | |
| the "optimize_server_names" directive was canceled | |
| due to the "server_name_in_redirect" directive introduction. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| некоторые давно устаревшие директивы больше не поддерживаются. | |
| </para> | |
| <para lang="en"> | |
| some long deprecated directives are not supported anymore. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| параметр "none" в директиве ssl_session_cache; | |
| теперь этот параметр используется по умолчанию.<br/> | |
| Спасибо Rob Mueller. | |
| </para> | |
| <para lang="en"> | |
| the "none" parameter in the "ssl_session_cache" directive; | |
| now this is default parameter.<br/> | |
| Thanks to Rob Mueller. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| рабочие процессы могли не реагировать на сигналы переконфигурации | |
| и ротации логов. | |
| </para> | |
| <para lang="en"> | |
| worker processes might not catch reconfiguration and log rotation signals. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на последних Fedora 9 Linux.<br/> | |
| Спасибо Roxis. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on latest Fedora 9 Linux.<br/> | |
| Thanks to Roxis. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.7.0" date="2008-05-19"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь символы 0x00-0x1F, '"' и '\' в access_log записываются в виде \xXX.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| now the 0x00-0x1F, '"' and '\' characters are escaped as \xXX in an | |
| access_log.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь nginx разрешает несколько строк "Host" в заголовке запроса. | |
| </para> | |
| <para lang="en"> | |
| now nginx allows several "Host" request header line. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива expires поддерживает флаг modified. | |
| </para> | |
| <para lang="en"> | |
| the "modified" flag in the "expires" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменные $uid_got и $uid_set можно использовать на любой стадии обработки | |
| запроса. | |
| </para> | |
| <para lang="en"> | |
| the $uid_got and $uid_set variables may be used at any request processing stage. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $hostname.<br/> | |
| Спасибо Андрею Нигматулину. | |
| </para> | |
| <para lang="en"> | |
| the $hostname variable.<br/> | |
| Thanks to Andrei Nigmatulin. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка DESTDIR.<br/> | |
| Спасибо Todd A. Fisher и Andras Voroskoi. | |
| </para> | |
| <para lang="en"> | |
| DESTDIR support.<br/> | |
| Thanks to Todd A. Fisher and Andras Voroskoi. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании keepalive на Linux | |
| в рабочем процессе мог произойти segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in worker process on Linux, | |
| if keepalive was enabled. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.6.31" date="2008-05-12"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не обрабатывал ответ FastCGI-сервера, если строка заголовка ответа была | |
| в конце записи FastCGI; | |
| ошибка появилась в 0.6.2.<br/> | |
| Спасибо Сергею Серову. | |
| </para> | |
| <para lang="en"> | |
| nginx did not process FastCGI response | |
| if header was at the end of FastCGI record; | |
| the bug had appeared in 0.6.2.<br/> | |
| Thanks to Sergey Serov. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при удалении файла и использовании директивы open_file_cache_errors off | |
| в рабочем процессе мог произойти segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in worker process if a file was deleted | |
| and the "open_file_cache_errors" directive was off. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.6.30" date="2008-04-29"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь, если маске, заданной в директиве include, не соответствует | |
| ни один файл, то nginx не выдаёт ошибку. | |
| </para> | |
| <para lang="en"> | |
| now if an "include" directive pattern does not match any file, | |
| then nginx does not issue an error. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь время в директивах можно задавать без пробела, например, "1h50m". | |
| </para> | |
| <para lang="en"> | |
| now the time in directives may be specified without spaces, | |
| for example, "1h50m". | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| утечек памяти, если директива ssl_verify_client имела значение on.<br/> | |
| Спасибо Chavelle Vincent. | |
| </para> | |
| <para lang="en"> | |
| memory leaks if the "ssl_verify_client" directive was on.<br/> | |
| Thanks to Chavelle Vincent. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива sub_filter могла вставлять заменяемый текст в вывод. | |
| </para> | |
| <para lang="en"> | |
| the "sub_filter" directive might set text to change into output. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива error_page не воспринимала параметры в перенаправляемом URI. | |
| </para> | |
| <para lang="en"> | |
| the "error_page" directive did not take into account arguments in | |
| redirected URI. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| теперь при сборке с Cygwin nginx всегда открывает файлы в бинарном режиме. | |
| </para> | |
| <para lang="en"> | |
| now nginx always opens files in binary mode under Cygwin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался под OpenBSD; | |
| ошибка появилась в 0.6.15. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on OpenBSD; | |
| the bug had appeared in 0.6.15. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.6.29" date="2008-03-18"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_google_perftools_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_google_perftools_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_perl_module не собирался на 64-битных платформах; | |
| ошибка появилась в 0.6.27. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_perl_module could not be built on 64-bit platforms; | |
| the bug had appeared in 0.6.27. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.6.28" date="2008-03-13"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| метод rtsig не собирался; | |
| ошибка появилась в 0.6.27. | |
| </para> | |
| <para lang="en"> | |
| the rtsig method could not be built; | |
| the bug had appeared in 0.6.27. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.6.27" date="2008-03-12"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь на Linux 2.6.18+ по умолчанию не собирается метод rtsig. | |
| </para> | |
| <para lang="en"> | |
| now by default the rtsig method is not built on <nobr>Linux 2.6.18+.</nobr> | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь при перенаправлении запроса в именованный location с помощью | |
| директивы error_page метод запроса не изменяется. | |
| </para> | |
| <para lang="en"> | |
| now a request method is not changed while redirection to a named location | |
| via an "error_page" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы resolver и resolver_timeout в SMTP прокси-сервере. | |
| </para> | |
| <para lang="en"> | |
| the "resolver" and "resolver_timeout" directives in SMTP proxy. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива post_action поддерживает именованные location'ы. | |
| </para> | |
| <para lang="en"> | |
| the "post_action" directive supports named locations. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при перенаправлении запроса из location'а c обработчиком proxy, FastCGI | |
| или memcached в именованный location со статическим обработчиком | |
| в рабочем процессе происходил segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault occurred in worker process, | |
| if a request was redirected from proxy, FastCGI, or memcached location | |
| to static named locations. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| браузеры не повторяли SSL handshake, если при первом handshake | |
| не оказалось правильного клиентского сертификата. | |
| <br/> | |
| Спасибо Александру Инюхину. | |
| </para> | |
| <para lang="en"> | |
| browsers did not repeat SSL handshake if there is no valid client certificate | |
| in first handshake. | |
| <br/> | |
| Thanks to Alexander V. Inyukhin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при перенаправлении ошибок 495-497 с помощью директивы error_page | |
| без изменения кода ошибки nginx пытался выделить очень много памяти. | |
| </para> | |
| <para lang="en"> | |
| if response code 495-497 was redirected via an "error_page" directive | |
| without code change, then nginx tried to allocate too many memory. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| утечки памяти в долгоживущих небуфферизированных соединениях. | |
| </para> | |
| <para lang="en"> | |
| memory leak in long-lived non buffered connections. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| утечки памяти в resolver'е. | |
| </para> | |
| <para lang="en"> | |
| memory leak in resolver. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при перенаправлении запроса из location'а c обработчиком proxy | |
| в другой location с обработчиком proxy | |
| в рабочем процессе происходил segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault occurred in worker process, | |
| if a request was redirected from proxy, FastCGI, or memcached location | |
| to static named locations. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки в кэшировании переменных $proxy_host и $proxy_port.<br/> | |
| Спасибо Сергею Боченкову. | |
| </para> | |
| <para lang="en"> | |
| in the $proxy_host and $proxy_port variables caching.<br/> | |
| Thanks to Sergey Bochenkov. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива proxy_pass с переменными использовала порт, описанной в другой | |
| директиве proxy_pass без переменных, но с таким же именем хоста.<br/> | |
| Спасибо Сергею Боченкову. | |
| </para> | |
| <para lang="en"> | |
| a "proxy_pass" directive with variables used incorrectly the same port | |
| as in another "proxy_pass" directive with the same host name | |
| and without variables.<br/> | |
| Thanks to Sergey Bochenkov. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| во время переконфигурации на некоторых 64-битном платформах в лог | |
| записывался alert "sendmsg() failed (9: Bad file descriptor)". | |
| </para> | |
| <para lang="en"> | |
| an alert "sendmsg() failed (9: Bad file descriptor)" on some 64-bit platforms | |
| while reconfiguration. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при повторном использовании в SSI пустого block'а в качестве заглушки | |
| в рабочем процессе происходил segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault occurred in worker process, | |
| if empty stub block was used second time in SSI. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки при копировании части URI, содержащего экранированные символы, | |
| в аргументы. | |
| </para> | |
| <para lang="en"> | |
| in copying URI part contained escaped symbols into arguments. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.6.26" date="2008-02-11"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директивы proxy_store и fastcgi_store не проверяли длину ответа. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_store" and "fastcgi_store" directives did not check | |
| a response length. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании большого значения в директиве expires | |
| в рабочем процессе происходил segmentation fault.<br/> | |
| Спасибо Joaquin Cuenca Abela. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault occurred in worker process, | |
| if big value was used in a "expires" directive.<br/> | |
| Thanks to Joaquin Cuenca Abela. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx неверно определял длину строки кэша на <nobr>Pentium 4.</nobr><br/> | |
| Спасибо Геннадию Махомеду. | |
| </para> | |
| <para lang="en"> | |
| nginx incorrectly detected cache line size on Pentium 4.<br/> | |
| Thanks to Gena Makhomed. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в проксированных подзапросах и подзапросах к FastCGI-серверу | |
| вместо метода GET использовался оригинальный метод клиента. | |
| </para> | |
| <para lang="en"> | |
| in proxied or FastCGI subrequests a client original method was used | |
| instead of the GET method. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| утечки сокетов в режиме HTTPS при использовании отложенного accept'а.<br/> | |
| Спасибо Ben Maurer. | |
| </para> | |
| <para lang="en"> | |
| socket leak in HTTPS mode if deferred accept was used.<br/> | |
| Thanks to Ben Maurer. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx выдавал ошибочное сообщение "SSL_shutdown() failed (SSL: )"; | |
| ошибка появилась в 0.6.23. | |
| </para> | |
| <para lang="en"> | |
| nginx issued the bogus error message "SSL_shutdown() failed (SSL: )"; | |
| the bug had appeared in 0.6.23. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании HTTPS запросы могли завершаться с ошибкой "bad write retry"; | |
| ошибка появилась в 0.6.23. | |
| </para> | |
| <para lang="en"> | |
| in HTTPS mode requests might fail with the "bad write retry" error; | |
| the bug had appeared in 0.6.23. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.6.25" date="2008-01-08"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| вместо специального параметра "*" в директиве server_name теперь | |
| используется директива server_name_in_redirect. | |
| </para> | |
| <para lang="en"> | |
| now the "server_name_in_redirect" directive is used instead of | |
| the "server_name" directive's special "*" parameter. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| в качестве основного имени в директиве server_name теперь | |
| можно использовать имена с масками и регулярными выражениями. | |
| </para> | |
| <para lang="en"> | |
| now wildcard and regex names can be used as main name in | |
| a "server_name" directive. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| директива satisfy_any заменена директивой satisfy. | |
| </para> | |
| <para lang="en"> | |
| the "satisfy_any" directive was replaced by the "satisfy" directive. | |
| </para> | |
| </change> | |
| <change type="workaround"> | |
| <para lang="ru"> | |
| после переконфигурации старые рабочие процесс могли сильно нагружать процессор | |
| при запуске под Linux OpenVZ. | |
| </para> | |
| <para lang="en"> | |
| old worker processes might hog CPU after reconfiguration if they was run | |
| under Linux OpenVZ. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива min_delete_depth. | |
| </para> | |
| <para lang="en"> | |
| the "min_delete_depth" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| методы COPY и MOVE не работали с одиночными файлами. | |
| </para> | |
| <para lang="en"> | |
| the COPY and MOVE methods did not work with single files. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_gzip_static_module не позволял работать модулю | |
| ngx_http_dav_module; | |
| ошибка появилась в 0.6.23. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_gzip_static_module did not allow the ngx_http_dav_module to work; | |
| the bug had appeared in 0.6.23. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| утечки сокетов в режиме HTTPS при использовании отложенного accept'а.<br/> | |
| Спасибо Ben Maurer. | |
| </para> | |
| <para lang="en"> | |
| socket leak in HTTPS mode if deferred accept was used.<br/> | |
| Thanks to Ben Maurer. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался без библиотеки PCRE; | |
| ошибка появилась в 0.6.23. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built without PCRE library; | |
| the bug had appeared in 0.6.23. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.6.24" date="2007-12-27"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании HTTPS в рабочем процессе мог произойти segmentation fault; | |
| ошибка появилась в 0.6.23. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in worker process if HTTPS was used; | |
| the bug had appeared in 0.6.23. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.6.23" date="2007-12-27"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| параметр "off" в директиве ssl_session_cache; | |
| теперь этот параметр используется по умолчанию. | |
| </para> | |
| <para lang="en"> | |
| the "off" parameter in the "ssl_session_cache" directive; | |
| now this is default parameter. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| директива open_file_cache_retest переименована в open_file_cache_valid. | |
| </para> | |
| <para lang="en"> | |
| the "open_file_cache_retest" directive was renamed | |
| to the "open_file_cache_valid". | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива open_file_cache_min_uses. | |
| </para> | |
| <para lang="en"> | |
| the "open_file_cache_min_uses" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_gzip_static_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_gzip_static_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива gzip_disable. | |
| </para> | |
| <para lang="en"> | |
| the "gzip_disable" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директиву memcached_pass можно использовать внутри блока if. | |
| </para> | |
| <para lang="en"> | |
| the "memcached_pass" directive may be used inside the "if" block. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если внутри одного location'а использовались директивы "memcached_pass" и "if", | |
| то в рабочем процессе происходил segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault occurred in worker process, | |
| if the "memcached_pass" and "if" directives were used in the same location. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если при использовании директивы satisfy_any on" были заданы директивы | |
| не всех модулей доступа, то заданные директивы не проверялись. | |
| </para> | |
| <para lang="en"> | |
| if a "satisfy_any on" directive was used and not all access and auth modules | |
| directives were set, then other given access and auth directives | |
| were not tested; | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| параметры, заданные регулярным выражением в директиве valid_referers, | |
| не наследовалась с предыдущего уровня. | |
| </para> | |
| <para lang="en"> | |
| regex parameters in a "valid_referers" directive were not inherited | |
| from previous level. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива post_action не работала, если запрос завершался с кодом 499. | |
| </para> | |
| <para lang="en"> | |
| a "post_action" directive did run if a request was completed | |
| with 499 status code. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| оптимизация использования 16K буфера для SSL-соединения.<br/> | |
| Спасибо Ben Maurer. | |
| </para> | |
| <para lang="en"> | |
| optimization of 16K buffer usage in a SSL connection.<br/> | |
| Thanks to Ben Maurer. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| STARTTLS в режиме SMTP не работал.<br/> | |
| Спасибо Олегу Мотиенко. | |
| </para> | |
| <para lang="en"> | |
| the STARTTLS in SMTP mode did not work.<br/> | |
| Thanks to Oleg Motienko. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании HTTPS запросы могли завершаться с ошибкой "bad write retry"; | |
| ошибка появилась в 0.5.13. | |
| </para> | |
| <para lang="en"> | |
| in HTTPS mode requests might fail with the "bad write retry" error; | |
| the bug had appeared in 0.5.13. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.6.22" date="2007-12-19"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь все методы модуля ngx_http_perl_module | |
| возвращают значения, скопированные в память, выделенную perl'ом. | |
| </para> | |
| <para lang="en"> | |
| now all ngx_http_perl_module methods return values copied to perl's | |
| allocated memory. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если nginx был собран с модулем ngx_http_perl_module, | |
| использовался perl до версии 5.8.6 и perl поддерживал потоки, | |
| то во время переконфигурации основной процесс аварийно выходил; | |
| ошибка появилась в 0.5.9.<br/> | |
| Спасибо Борису Жмурову. | |
| </para> | |
| <para lang="en"> | |
| if nginx was built with ngx_http_perl_module, | |
| the perl before 5.8.6 was used, and perl supported threads, | |
| then during reconfiguration the master process aborted; | |
| the bug had appeared in 0.5.9.<br/> | |
| Thanks to Boris Zhmurov. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в методы модуля ngx_http_perl_module | |
| могли передаваться неверные результаты выделения в регулярных выражениях. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_perl_module methods may get invalid values of the regex captures. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если метод $r->has_request_body() вызывался для запроса, | |
| у которого небольшое тело запроса было уже полностью получено, | |
| то в рабочем процессе происходил segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault occurred in worker process, | |
| if the $r->has_request_body() method was called for a request | |
| whose small request body was already received. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| large_client_header_buffers не освобождались перед переходом в состояние | |
| keep-alive.<br/> | |
| Спасибо Олександру Штепе. | |
| </para> | |
| <para lang="en"> | |
| large_client_header_buffers did not freed before going to keep-alive state.<br/> | |
| Thanks to Olexander Shtepa. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в переменной $upstream_addr не записывался последний адрес; | |
| ошибка появилась в 0.6.18. | |
| </para> | |
| <para lang="en"> | |
| the last address was missed in the $upstream_addr variable; | |
| the bug had appeared in 0.6.18. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива fastcgi_catch_stderr не возвращала ошибку; | |
| теперь она возвращает ошибку 502, которую можно направить на следующий сервер | |
| с помощью "fastcgi_next_upstream invalid_header". | |
| </para> | |
| <para lang="en"> | |
| the "fastcgi_catch_stderr" directive did return error code; | |
| now it returns 502 code, that can be rerouted to a next server using | |
| the "fastcgi_next_upstream invalid_header" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы fastcgi_catch_stderr | |
| в основном процессе происходил segmentation fault; | |
| ошибка появилась в 0.6.10.<br/> | |
| Спасибо Manlio Perillo. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault occurred in master process | |
| if the "fastcgi_catch_stderr" directive was used; | |
| the bug had appeared in 0.6.10.<br/> | |
| Thanks to Manlio Perillo. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.6.21" date="2007-12-03"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| если в значениях переменных директивы proxy_pass используются | |
| только IP-адреса, то указывать resolver не нужно. | |
| </para> | |
| <para lang="en"> | |
| if variable values used in a "proxy_pass" directive contain IP-addresses only, | |
| then a "resolver" directive is not mandatory. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы proxy_pass c URI-частью | |
| в рабочем процессе мог произойти segmentation fault; | |
| ошибка появилась в 0.6.19. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in worker process | |
| if a "proxy_pass" directive with URI-part was used; | |
| the bug had appeared in 0.6.19. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если resolver использовался на платформах, не поддерживающих метод kqueue, | |
| то nginx выдавал alert "name is out of response".<br/> | |
| Спасибо Андрею Нигматулину. | |
| </para> | |
| <para lang="en"> | |
| if resolver was used on platform that does not support kqueue, | |
| then nginx issued an alert "name is out of response".<br/> | |
| Thanks to Andrei Nigmatulin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| При использовании переменной $server_protocol в FastCGI-параметрах | |
| и запросе, длина которого была близка к значению директивы | |
| client_header_buffer_size, | |
| nginx выдавал alert "fastcgi: the request record is too big". | |
| </para> | |
| <para lang="en"> | |
| if the $server_protocol was used in FastCGI parameters | |
| and a request line length was near to the "client_header_buffer_size" | |
| directive value, | |
| then nginx issued an alert "fastcgi: the request record is too big". | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при обычном запросе версии HTTP/0.9 к HTTPS серверу nginx возвращал | |
| обычный ответ. | |
| </para> | |
| <para lang="en"> | |
| if a plain text HTTP/0.9 version request was made to HTTPS server, | |
| then nginx returned usual response. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.6.20" date="2007-11-28"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы proxy_pass c URI-частью | |
| в рабочем процессе мог произойти segmentation fault; | |
| ошибка появилась в 0.6.19. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in worker process | |
| if a "proxy_pass" directive with URI-part was used; | |
| the bug had appeared in 0.6.19. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.6.19" date="2007-11-27"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| версия 0.6.18 не собиралась. | |
| </para> | |
| <para lang="en"> | |
| the 0.6.18 version could not be built. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.6.18" date="2007-11-27"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь модуль ngx_http_userid_module в поле куки с номером процесса | |
| добавляет микросекунды на время старта. | |
| </para> | |
| <para lang="en"> | |
| now the ngx_http_userid_module adds start time microseconds | |
| to the cookie field contains a pid value. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| в error_log теперь записывается полная строка запроса вместо только URI. | |
| </para> | |
| <para lang="en"> | |
| now the full request line instead of URI only is written to error_log. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива proxy_pass поддерживает переменные. | |
| </para> | |
| <para lang="en"> | |
| variables support in the "proxy_pass" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы resolver и resolver_timeout. | |
| </para> | |
| <para lang="en"> | |
| the "resolver" and "resolver_timeout" directives. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь директива "add_header last-modified ''" удаляет в заголовке ответа | |
| строку "Last-Modified". | |
| </para> | |
| <para lang="en"> | |
| now the directive "add_header last-modified ''" deletes a "Last-Modified" | |
| response header line. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива limit_rate не позволяла передавать на полной скорости, | |
| даже если был указан очень большой лимит. | |
| </para> | |
| <para lang="en"> | |
| the "limit_rate" directive did not allow to use full throughput, | |
| even if limit value was very high. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.6.17" date="2007-11-15"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка строки "If-Range" в заголовке запроса.<br/> | |
| Спасибо Александру Инюхину. | |
| </para> | |
| <para lang="en"> | |
| the "If-Range" request header line support.<br/> | |
| Thanks to Alexander V. Inyukhin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы msie_refresh повторно экранировались | |
| уже экранированные символы; | |
| ошибка появилась в 0.6.4. | |
| </para> | |
| <para lang="en"> | |
| URL double escaping in a redirect of the "msie_refresh" directive; | |
| the bug had appeared in 0.6.4. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива autoindex не работала при использовании "alias /". | |
| </para> | |
| <para lang="en"> | |
| the "autoindex" directive did not work with the "alias /" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании подзапросов | |
| в рабочем процессе мог произойти segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in worker process if subrequests were used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании SSL и gzip большие ответы могли передаваться не полностью. | |
| </para> | |
| <para lang="en"> | |
| the big responses may be transferred truncated if SSL and gzip were used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если ответ проксированного сервера был версии HTTP/0.9, | |
| то переменная $status была равна 0. | |
| </para> | |
| <para lang="en"> | |
| the $status variable was equal to 0 if a proxied server returned response | |
| in HTTP/0.9 version. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.6.16" date="2007-10-29"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь на Linux используется uname(2) вместо procfs.<br/> | |
| Спасибо Илье Новикову. | |
| </para> | |
| <para lang="en"> | |
| now the uname(2) is used on Linux instead of procfs.<br/> | |
| Thanks to Ilya Novikov. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если в директиве error_page использовался символ "?", то он экранировался | |
| при проксировании запроса; | |
| ошибка появилась в 0.6.11. | |
| </para> | |
| <para lang="en"> | |
| if the "?" character was in a "error_page" directive, then it was escaped | |
| in a proxied request; | |
| the bug had appeared in 0.6.11. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| совместимость с mget. | |
| </para> | |
| <para lang="en"> | |
| compatibility with mget. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.6.15" date="2007-10-22"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| совместимость с Cygwin.<br/> | |
| Спасибо Владимиру Кутакову. | |
| </para> | |
| <para lang="en"> | |
| Cygwin compatibility.<br/> | |
| Thanks to Vladimir Kutakov. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива merge_slashes. | |
| </para> | |
| <para lang="en"> | |
| the "merge_slashes" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива gzip_vary. | |
| </para> | |
| <para lang="en"> | |
| the "gzip_vary" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива server_tokens. | |
| </para> | |
| <para lang="en"> | |
| the "server_tokens" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не раскодировал URI в команде SSI include. | |
| </para> | |
| <para lang="en"> | |
| nginx did not unescape URI in the "include" SSI command. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании переменной в директивах charset или source_charset | |
| на старте или во время переконфигурации происходил segmentation fault, | |
| </para> | |
| <para lang="en"> | |
| the segmentation fault was occurred on start or while reconfiguration | |
| if variable was used in the "charset" or "source_charset" directives. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx возвращал ошибку 400 на запросы вида | |
| <nobr>"GET http://www.domain.com HTTP/1.0"</nobr>.<br/> | |
| Спасибо James Oakley. | |
| </para> | |
| <para lang="en"> | |
| nginx returned the 400 response on requests like | |
| <nobr>"GET http://www.domain.com HTTP/1.0"</nobr>.<br/> | |
| Thanks to James Oakley. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| после перенаправления запроса с телом запроса с помощью директивы | |
| error_page nginx пытался снова прочитать тело запроса; | |
| ошибка появилась в 0.6.7. | |
| </para> | |
| <para lang="en"> | |
| if request with request body was redirected using the "error_page" directive, | |
| then nginx tried to read the request body again; | |
| the bug had appeared in 0.6.7. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе происходил segmentation fault, если у сервера, | |
| обрабатывающему запрос, не был явно определён server_name; | |
| ошибка появилась в 0.6.7. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault occurred in worker process | |
| if no server_name was explicitly defined for server processing request; | |
| the bug had appeared in 0.6.7. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.6.14" date="2007-10-15"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь по умолчанию команда SSI echo использует кодирование entity. | |
| </para> | |
| <para lang="en"> | |
| now by default the "echo" SSI command uses entity encoding. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр encoding в команде SSI echo. | |
| </para> | |
| <para lang="en"> | |
| the "encoding" parameter in the "echo" SSI command. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директиву access_log можно использовать внутри блока limit_except. | |
| </para> | |
| <para lang="en"> | |
| the "access_log" directive may be used inside the "limit_except" block. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если все сервера апстрима оказывались недоступными, | |
| то до восстановления работоспособности | |
| у всех серверов вес становился равным одному; | |
| ошибка появилась в 0.6.6. | |
| </para> | |
| <para lang="en"> | |
| if all upstream servers were failed, then all servers had got weight | |
| the was equal one until servers became alive; | |
| the bug had appeared in 0.6.6. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании переменных $date_local и $date_gmt вне модуля | |
| ngx_http_ssi_filter_module в рабочем процессе происходил segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault occurred in worker process | |
| if $date_local and $date_gmt were used outside the ngx_http_ssi_filter_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании включённом отладочном логе | |
| в рабочем процессе мог произойти segmentation fault.<br/> | |
| Спасибо Андрею Нигматулину. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in worker process | |
| if debug log was enabled.<br/> | |
| Thanks to Andrei Nigmatulin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ngx_http_memcached_module не устанавливал $upstream_response_time.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| ngx_http_memcached_module did not set $upstream_response_time.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| рабочий процесс мог зациклиться при использовании memcached. | |
| </para> | |
| <para lang="en"> | |
| a worker process may got caught in an endless loop, if the memcached was used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx распознавал параметры "close" и "keep-alive" в строке "Connection" | |
| в заголовке запроса только, если они были в нижнем регистре; | |
| ошибка появилась в 0.6.11. | |
| </para> | |
| <para lang="en"> | |
| nginx supported low case only "close" and "keep-alive" values | |
| in the "Connection" request header line; | |
| the bug had appeared in 0.6.11. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| sub_filter не работал с пустой строкой замены. | |
| </para> | |
| <para lang="en"> | |
| sub_filter did not work with empty substitution. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в парсинге sub_filter. | |
| </para> | |
| <para lang="en"> | |
| in sub_filter parsing. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.6.13" date="2007-09-24"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не закрывал файл каталога для запроса HEAD, | |
| если использовался autoindex<br/> | |
| Спасибо Arkadiusz Patyk. | |
| </para> | |
| <para lang="en"> | |
| nginx did not close directory file on HEAD request if autoindex was used.<br/> | |
| Thanks to Arkadiusz Patyk. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.6.12" date="2007-09-21"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| почтовый прокси-сервер разделён на три модуля: pop3, imap и smtp. | |
| </para> | |
| <para lang="en"> | |
| mail proxy was split on three modules: pop3, imap and smtp. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметры конфигурации --without-mail_pop3_module, | |
| --without-mail_imap_module и --without-mail_smtp_module. | |
| </para> | |
| <para lang="en"> | |
| the --without-mail_pop3_module, --without-mail_imap_module, | |
| and --without-mail_smtp_module configuration parameters. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы smtp_greeting_delay и smtp_client_buffer модуля ngx_mail_smtp_module. | |
| </para> | |
| <para lang="en"> | |
| the "smtp_greeting_delay" and "smtp_client_buffer" directives | |
| of the ngx_mail_smtp_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| wildcard в конце имени сервера не работали; | |
| ошибка появилась в 0.6.9. | |
| </para> | |
| <para lang="en"> | |
| the trailing wildcards did not work; | |
| the bug had appeared in 0.6.9. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании разделяемой библиотеки PCRE, | |
| расположенной в нестандартном месте, nginx не запускался на Solaris. | |
| </para> | |
| <para lang="en"> | |
| nginx could not start on Solaris if the shared PCRE library located | |
| in non-standard place was used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директивы proxy_hide_header и fastcgi_hide_header не скрывали | |
| строки заголовка ответа с именем больше 32 символов.<br/> | |
| Спасибо Manlio Perillo. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_hide_header" and "fastcgi_hide_header" directives did not | |
| hide response header lines whose name was longer than 32 characters.<br/> | |
| Thanks to Manlio Perillo. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.6.11" date="2007-09-11"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| счётчик активных соединений всегда рос при использовании почтового | |
| прокси-сервера. | |
| </para> | |
| <para lang="en"> | |
| active connection counter always increased if mail proxy was used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если бэкенд возвращал только заголовок ответа при небуферизированном | |
| проксировании, то nginx закрывал соединение с бэкендом по таймауту. | |
| </para> | |
| <para lang="en"> | |
| if backend returned response header only using non-buffered proxy, | |
| then nginx closed backend connection on timeout. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не поддерживал несколько строк "Connection" в заголовке запроса. | |
| </para> | |
| <para lang="en"> | |
| nginx did not support several "Connection" request header lines. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если в сервере апстрима был задан max_fails, то после первой же неудачной | |
| попытки вес сервера навсегда становился равным одному; | |
| ошибка появилась в 0.6.6. | |
| </para> | |
| <para lang="en"> | |
| if the "max_fails" was set for upstream server, then after first | |
| failure server weight was always one; | |
| the bug had appeared in 0.6.6. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.6.10" date="2007-09-03"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы open_file_cache, open_file_cache_retest и open_file_cache_errors. | |
| </para> | |
| <para lang="en"> | |
| the "open_file_cache", "open_file_cache_retest", and "open_file_cache_errors" | |
| directives. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| утечки сокетов; | |
| ошибка появилась в 0.6.7. | |
| </para> | |
| <para lang="en"> | |
| socket leak; | |
| the bug had appeared in 0.6.7. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| В строку заголовка ответа "Content-Type", указанную в методе | |
| $r->send_http_header(), не добавлялась кодировка, указанная в директиве charset. | |
| </para> | |
| <para lang="en"> | |
| a charset set by the "charset" directive was not appended | |
| to the "Content-Type" header set by $r->send_http_header(). | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании метода /dev/poll | |
| в рабочем процессе мог произойти segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in worker process | |
| if /dev/poll method was used. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.6.9" date="2007-08-28"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| рабочий процесс мог зациклиться при использовании протокола HTTPS; | |
| ошибка появилась в 0.6.7. | |
| </para> | |
| <para lang="en"> | |
| a worker process may got caught in an endless loop, | |
| if the HTTPS protocol was used; | |
| the bug had appeared in 0.6.7. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если сервер слушал на двух адресах или портах, то nginx не запускался | |
| при использовании wildcard в конце имени сервера. | |
| </para> | |
| <para lang="en"> | |
| if server listened on two addresses or ports and trailing wildcard was used, | |
| then nginx did not run. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива ip_hash могла неверно помечать сервера как нерабочие. | |
| </para> | |
| <para lang="en"> | |
| the "ip_hash" directive might incorrectly mark servers as down. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на amd64; | |
| ошибка появилась в 0.6.8. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on amd64; | |
| the bug had appeared in 0.6.8. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.6.8" date="2007-08-20"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь nginx пытается установить директивы worker_priority, | |
| worker_rlimit_nofile, worker_rlimit_core, worker_rlimit_sigpending | |
| без привилегий root'а. | |
| </para> | |
| <para lang="en"> | |
| now nginx tries to set the "worker_priority", "worker_rlimit_nofile", | |
| "worker_rlimit_core", and "worker_rlimit_sigpending" without super-user | |
| privileges. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь nginx экранирует символы пробела и "%" при передаче запроса | |
| серверу аутентификации почтового прокси-сервера. | |
| </para> | |
| <para lang="en"> | |
| now nginx escapes space and "%" in request to a mail proxy authentication | |
| server. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь nginx экранирует символ "%" в переменной $memcached_key. | |
| </para> | |
| <para lang="en"> | |
| now nginx escapes "%" in $memcached_key variable. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при указании относительного пути к конфигурационному файлу в качестве | |
| параметра ключа -c nginx определял путь относительно конфигурационного префикса; | |
| ошибка появилась в 0.6.6. | |
| </para> | |
| <para lang="en"> | |
| nginx used path relative to configuration prefix for non-absolute | |
| configuration file path specified in the "-c" key; | |
| the bug had appeared in 0.6.6. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не работал на FreeBSD/sparc64. | |
| </para> | |
| <para lang="en"> | |
| nginx did not work on FreeBSD/sparc64. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.6.7" date="2007-08-15"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь пути, указанные в директивах include, auth_basic_user_file, | |
| perl_modules, ssl_certificate, ssl_certificate_key и | |
| ssl_client_certificate, определяются относительно каталога конфигурационного | |
| файла nginx.conf, а не относительно префикса. | |
| </para> | |
| <para lang="en"> | |
| now the paths specified in the "include", "auth_basic_user_file", | |
| "perl_modules", "ssl_certificate", "ssl_certificate_key", and | |
| "ssl_client_certificate" directives are relative to directory of | |
| nginx configuration file nginx.conf, but not to nginx prefix directory. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| параметр --sysconfdir=PATH в configure упразднён. | |
| </para> | |
| <para lang="en"> | |
| the --sysconfdir=PATH option in configure was canceled. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| для обновления на лету версий 0.1.x создан специальный сценарий | |
| <nobr>make upgrade1.</nobr> | |
| </para> | |
| <para lang="en"> | |
| the special make target "upgrade1" was defined for online upgrade of | |
| 0.1.x versions. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы server_name и valid_referers поддерживают регулярные выражения. | |
| </para> | |
| <para lang="en"> | |
| the "server_name" and "valid_referers" directives support regular expressions. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива server в блоке upstream поддерживает параметр backup. | |
| </para> | |
| <para lang="en"> | |
| the "server" directive in the "upstream" context supports | |
| the "backup" parameter. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_perl_module поддерживает метод $r->discard_request_body. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_perl_module supports the $r->discard_request_body. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива "add_header Last-Modified ..." меняет строку "Last-Modified" | |
| в заголовке ответа. | |
| </para> | |
| <para lang="en"> | |
| the "add_header Last-Modified ..." directive changes the "Last-Modified" | |
| response header line. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если на запрос с телом возвращался ответ с кодом HTTP отличным от 200, | |
| и после этого запроса соединение переходило в состояние keep-alive, | |
| то на следующий запрос nginx возвращал 400. | |
| </para> | |
| <para lang="en"> | |
| if a response different than 200 was returned to a request with body | |
| and connection went to the keep-alive state after the request, then | |
| nginx returned 400 for the next request. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если в директиве auth_http был задан неправильный адрес, то | |
| в рабочем процессе происходил segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault occurred in worker process | |
| if invalid address was set in the "auth_http" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| теперь по умолчанию nginx использует значение 511 для listen backlog | |
| на всех платформах, кроме FreeBSD.<br/> | |
| Спасибо Jiang Hong. | |
| </para> | |
| <para lang="en"> | |
| now nginx uses default listen backlog value 511 on all platforms | |
| except FreeBSD.<br/> | |
| Thanks to Jiang Hong. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| рабочий процесс мог зациклиться, если server в блоке upstream был помечен | |
| как down; | |
| ошибка появилась в 0.6.6. | |
| </para> | |
| <para lang="en"> | |
| a worker process may got caught in an endless loop, if a "server" inside | |
| "upstream" block was marked as "down"; | |
| the bug had appeared in 0.6.6. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| sendfilev() в Solaris теперь не используется при передаче тела запроса | |
| FastCGI-серверу через unix domain сокет. | |
| </para> | |
| <para lang="en"> | |
| now Solaris sendfilev() is not used to transfer the client request body | |
| to FastCGI-server via the unix domain socket. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.6.6" date="2007-07-30"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр --sysconfdir=PATH в configure. | |
| </para> | |
| <para lang="en"> | |
| the --sysconfdir=PATH option in configure. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| именованные location'ы. | |
| </para> | |
| <para lang="en"> | |
| named locations. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменную $args можно устанавливать с помощью set. | |
| </para> | |
| <para lang="en"> | |
| the $args variable can be set with the "set" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $is_args. | |
| </para> | |
| <para lang="en"> | |
| the $is_args variable. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| равномерное распределение запросов к апстримам с большими весами. | |
| </para> | |
| <para lang="en"> | |
| fair big weight upstream balancer. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если клиент в почтовом прокси-сервере закрывал соединение, | |
| то nginx мог не закрывать соединение с бэкендом. | |
| </para> | |
| <para lang="en"> | |
| if a client has closed connection to mail proxy | |
| then nginx might not close connection to backend. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании одного хоста в качестве бэкендов для протоколов HTTP и HTTPS | |
| без явного указания портов, nginx использовал только один порт—80 или 443. | |
| </para> | |
| <para lang="en"> | |
| if the same host without specified port was used as backend for HTTP and HTTPS, | |
| then nginx used only one port—80 or 443. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на Solaris/amd64 Sun Studio 11 и более ранними версиями; | |
| ошибка появилась в 0.6.4. | |
| </para> | |
| <para lang="en"> | |
| fix building on Solaris/amd64 by Sun Studio 11 and early versions; | |
| the bug had appeared in 0.6.4. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.6.5" date="2007-07-23"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $nginx_version.<br/> | |
| Спасибо Николаю Гречуху. | |
| </para> | |
| <para lang="en"> | |
| $nginx_version variable.<br/> | |
| Thanks to Nick S. Grechukh. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| почтовый прокси-сервер поддерживает AUTHENTICATE в режиме IMAP.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| the mail proxy supports AUTHENTICATE in IMAP mode.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| почтовый прокси-сервер поддерживает STARTTLS в режиме SMTP.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| the mail proxy supports STARTTLS in SMTP mode.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| теперь nginx экранирует пробел в переменной $memcached_key. | |
| </para> | |
| <para lang="en"> | |
| now nginx escapes space in $memcached_key variable. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx неправильно собирался Sun Studio на Solaris/amd64.<br/> | |
| Спасибо Jiang Hong. | |
| </para> | |
| <para lang="en"> | |
| nginx was incorrectly built by Sun Studio on Solaris/amd64.<br/> | |
| Thanks to Jiang Hong. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| незначительных потенциальных ошибок.<br/> | |
| Спасибо Coverity's Scan. | |
| </para> | |
| <para lang="en"> | |
| of minor potential bugs.<br/> | |
| Thanks to Coverity's Scan. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.6.4" date="2007-07-17"> | |
| <change type="security"> | |
| <para lang="ru"> | |
| при использовании директивы msie_refresh был возможен XSS.<br/> | |
| Спасибо Максиму Богуку. | |
| </para> | |
| <para lang="en"> | |
| the "msie_refresh" directive allowed XSS.<br/> | |
| Thanks to Maxim Boguk. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| директивы proxy_store и fastcgi_store изменены. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_store" and "fastcgi_store" directives were changed. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы proxy_store_access и fastcgi_store_access. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_store_access" and "fastcgi_store_access" directives. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не работал на Solaris/sparc64, если был собран Sun Studio.<br/> | |
| Спасибо Андрею Нигматулину. | |
| </para> | |
| <para lang="en"> | |
| nginx did not work on Solaris/sparc64 if it was built by Sun Studio.<br/> | |
| Thanks to Andrei Nigmatulin. | |
| </para> | |
| </change> | |
| <change type="workaround"> | |
| <para lang="ru"> | |
| обход ошибки в Sun Studio 12.<br/> | |
| Спасибо Jiang Hong. | |
| </para> | |
| <para lang="en"> | |
| for Sun Studio 12.<br/> | |
| Thanks to Jiang Hong. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.6.3" date="2007-07-12"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы proxy_store и fastcgi_store. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_store" and "fastcgi_store" directives. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы auth_http_header | |
| в рабочем процессе мог произойти segmentation fault.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in worker process | |
| if the "auth_http_header" directive was used.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если использовался метод аутентификации CRAM-MD5, но он не был разрешён, | |
| то в рабочем процессе происходил segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault occurred in worker process | |
| if the CRAM-MD5 authentication method was used, but it was not enabled. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании протокола HTTPS в директиве proxy_pass | |
| в рабочем процессе мог произойти segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in worker process when | |
| the HTTPS protocol was used in the "proxy_pass" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в рабочем процессе мог произойти segmentation fault, | |
| если использовался метод eventport. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in worker process | |
| if the eventport method was used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директивы proxy_ignore_client_abort и fastcgi_ignore_client_abort не работали; | |
| ошибка появилась в 0.5.13. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_ignore_client_abort" and "fastcgi_ignore_client_abort" directives | |
| did not work; | |
| the bug had appeared in 0.5.13. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.6.2" date="2007-07-09"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если заголовок ответа был разделён в FastCGI-записях, то nginx передавал | |
| клиенту мусор в таких заголовках. | |
| </para> | |
| <para lang="en"> | |
| if the FastCGI header was split in records, | |
| then nginx passed garbage in the header to a client. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.6.1" date="2007-06-17"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в парсинге SSI. | |
| </para> | |
| <para lang="en"> | |
| in SSI parsing. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании удалённого подзапроса в SSI последующий | |
| подзапрос локального файла мог отдаваться клиенту в неверном порядке. | |
| </para> | |
| <para lang="en"> | |
| if remote SSI subrequest was used, then posterior local file subrequest | |
| might transferred to client in wrong order. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| большие включения в SSI, сохранённые во временные файлы, | |
| передавались не полностью. | |
| </para> | |
| <para lang="en"> | |
| large SSI inclusions buffered in temporary files were truncated. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| значение perl'овой переменной $$ модуля ngx_http_perl_module было равно | |
| номеру главного процесса. | |
| </para> | |
| <para lang="en"> | |
| the perl $$ variable value in ngx_http_perl_module was equal to the master | |
| process identification number. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.6.0" date="2007-06-14"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы "server_name", "map", and "valid_referers" поддерживают | |
| маски вида "www.example.*". | |
| </para> | |
| <para lang="en"> | |
| the "server_name", "map", and "valid_referers" directives support | |
| the "www.example.*" wildcards. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.5.25" date="2007-06-11"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался с параметром --without-http_rewrite_module; | |
| ошибка появилась в 0.5.24. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built with the --without-http_rewrite_module parameter; | |
| the bug had appeared in 0.5.24. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.5.24" date="2007-06-06"> | |
| <change type="security"> | |
| <para lang="ru"> | |
| директива ssl_verify_client не работала, если запрос выполнялся | |
| по протоколу HTTP/0.9. | |
| </para> | |
| <para lang="en"> | |
| the "ssl_verify_client" directive did not work if request was made | |
| using HTTP/0.9. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании сжатия часть ответа могла передаваться несжатой; | |
| ошибка появилась в 0.5.23. | |
| </para> | |
| <para lang="en"> | |
| a part of response body might be passed uncompressed if gzip was used; | |
| the bug had appeared in 0.5.23. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.5.23" date="2007-06-04"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_ssl_module поддерживает расширение TLS Server Name Indication. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_ssl_module supports Server Name Indication TLS extension. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива fastcgi_catch_stderr.<br/> | |
| Спасибо Николаю Гречуху, проект OWOX. | |
| </para> | |
| <para lang="en"> | |
| the "fastcgi_catch_stderr" directive.<br/> | |
| Thanks to Nick S. Grechukh, OWOX project. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| на Линуксе в основном процессе происходил segmentation fault, | |
| если два виртуальных сервера должны bind()ится к пересекающимся портам. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault occurred in master process if | |
| two virtual servers should bind() to the overlapping ports. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если nginx был собран с модулем ngx_http_perl_module и perl | |
| поддерживал потоки, то во время второй переконфигурации | |
| выдавались ошибки "panic: MUTEX_LOCK" и "perl_parse() failed". | |
| </para> | |
| <para lang="en"> | |
| if nginx was built with ngx_http_perl_module and perl supported threads, | |
| then during second reconfiguration the error messages | |
| "panic: MUTEX_LOCK" and "perl_parse() failed" were issued. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в использовании протокола HTTPS в директиве proxy_pass. | |
| </para> | |
| <para lang="en"> | |
| in the HTTPS protocol in the "proxy_pass" directive. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.5.22" date="2007-05-29"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| большое тело запроса могло не передаваться бэкенду; | |
| ошибка появилась в 0.5.21. | |
| </para> | |
| <para lang="en"> | |
| a big request body might not be passed to backend; | |
| the bug had appeared in 0.5.21. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.5.21" date="2007-05-28"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если внутри сервера описано больше примерно десяти location'ов, | |
| то location'ы, заданные с помощью регулярного выражения, | |
| могли выполняться не в том, порядке, в каком они описаны. | |
| </para> | |
| <para lang="en"> | |
| if server has more than about ten locations, then regex locations | |
| might be chosen not in that order as they were specified. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| на 64-битной платформе рабочий процесс мог зациклиться, если 33-тий | |
| по счёту или последующий бэкенд упал.<br/> | |
| Спасибо Антону Поварову. | |
| </para> | |
| <para lang="en"> | |
| a worker process may got caught in an endless loop on 64-bit platform, | |
| if the 33-rd or next in succession backend has failed.<br/> | |
| Thanks to Anton Povarov. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании библиотеки PCRE на Solaris/sparc64 | |
| мог произойти bus error.<br/> | |
| Спасибо Андрею Нигматулину. | |
| </para> | |
| <para lang="en"> | |
| a bus error might occur on Solaris/sparc64 if the PCRE library was used.<br/> | |
| Thanks to Andrei Nigmatulin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в использовании протокола HTTPS в директиве proxy_pass. | |
| </para> | |
| <para lang="en"> | |
| in the HTTPS protocol in the "proxy_pass" directive. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.5.20" date="2007-05-07"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива sendfile_max_chunk. | |
| </para> | |
| <para lang="en"> | |
| the "sendfile_max_chunk" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменные "$http_...", "$sent_http_..." и "$upstream_http_..." | |
| можно менять директивой set. | |
| </para> | |
| <para lang="en"> | |
| the "$http_...", "$sent_http_...", and "$upstream_http_..." variables | |
| may be changed using the "set" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании SSI-команды 'if expr="$var = /"' | |
| в рабочем процессе мог произойти segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in worker process | |
| if the SSI command 'if expr="$var = /"' was used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| завершающая строка multipart range ответа передавалась неверно.<br/> | |
| Спасибо Evan Miller. | |
| </para> | |
| <para lang="en"> | |
| trailing boundary of multipart range response was transferred incorrectly.<br/> | |
| Thanks to Evan Miller. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не работал на Solaris/sparc64, если был собран Sun Studio.<br/> | |
| Спасибо Андрею Нигматулину. | |
| </para> | |
| <para lang="en"> | |
| nginx did not work on Solaris/sparc64 if it was built by Sun Studio.<br/> | |
| Thanks to Andrei Nigmatulin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_perl_module не собирался make в Solaris.<br/> | |
| Спасибо Андрею Нигматулину. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_perl_module could not be built by Solaris make.<br/> | |
| Thanks to Andrei Nigmatulin. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.5.19" date="2007-04-24"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| значение переменной $request_time теперь записывается с точностью | |
| до миллисекунд. | |
| </para> | |
| <para lang="en"> | |
| now the $request_time variable has millisecond precision. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| метод $r->rflush в модуле ngx_http_perl_module переименован в $r->flush. | |
| </para> | |
| <para lang="en"> | |
| the method $r->rflush of ngx_http_perl_module was renamed to the $r->flush. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $upstream_addr. | |
| </para> | |
| <para lang="en"> | |
| the $upstream_addr variable. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы proxy_headers_hash_max_size и proxy_headers_hash_bucket_size.<br/> | |
| Спасибо Володымыру Костырко. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_headers_hash_max_size" and "proxy_headers_hash_bucket_size" | |
| directives.<br/> | |
| Thanks to Volodymyr Kostyrko. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании sendfile и limit_rate на 64-битных платформах | |
| нельзя было передавать файлы больше 2G. | |
| </para> | |
| <para lang="en"> | |
| the files more than 2G could not be transferred using sendfile and limit_rate | |
| on 64-bit platforms. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании sendfile на 64-битном Linux нельзя было передавать файлы | |
| больше 2G. | |
| </para> | |
| <para lang="en"> | |
| the files more than 2G could not be transferred using sendfile on 64-bit Linux. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.5.18" date="2007-04-19"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_sub_filter_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_sub_filter_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменные "$upstream_http_...". | |
| </para> | |
| <para lang="en"> | |
| the "$upstream_http_..." variables. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь переменные $upstream_status и $upstream_response_time | |
| содержат данные о всех обращениях к апстримам, сделанным до X-Accel-Redirect. | |
| </para> | |
| <para lang="en"> | |
| now the $upstream_status and $upstream_response_time variables | |
| keep data about all upstreams before X-Accel-Redirect. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если nginx был собран с модулем ngx_http_perl_module и perl | |
| не поддерживал multiplicity, то после первой переконфигурации | |
| и после получения любого сигнала | |
| в основном процессе происходил segmentation fault; | |
| ошибка появилась в 0.5.9. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault occurred in master process | |
| after first reconfiguration and receiving any signal | |
| if nginx was built with ngx_http_perl_module and perl | |
| did not support multiplicity; | |
| the bug had appeared in 0.5.9. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если perl не поддерживал multiplicity, то после переконфигурации | |
| перловый код не работал; | |
| ошибка появилась в 0.3.38. | |
| </para> | |
| <para lang="en"> | |
| if perl did not support multiplicity, then after reconfiguration | |
| perl code did not work; | |
| the bug had appeared in 0.3.38. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.5.17" date="2007-04-02"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь nginx для метода TRACE всегда возвращает код 405. | |
| </para> | |
| <para lang="en"> | |
| now nginx always returns the 405 status for the TRACE method. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь nginx поддерживает директиву include внутри блока types. | |
| </para> | |
| <para lang="en"> | |
| now nginx supports the "include" directive inside the "types" block. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| использование переменной $document_root в директиве root и alias | |
| запрещено: оно вызывало рекурсивное переполнение стека. | |
| </para> | |
| <para lang="en"> | |
| the $document_root variable usage in the "root" and "alias" directives | |
| is disabled: this caused recursive stack overflow. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в использовании протокола HTTPS в директиве proxy_pass. | |
| </para> | |
| <para lang="en"> | |
| in the HTTPS protocol in the "proxy_pass" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в некоторых случаях некэшируемые переменные (такие, как $uri) | |
| возвращали старое закэшированное значение. | |
| </para> | |
| <para lang="en"> | |
| in some cases non-cacheable variables (such as $uri variable) | |
| returned old cached value. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.5.16" date="2007-03-26"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в качестве ключа для хэша в директиве ip_hash не использовалась сеть | |
| класса С.<br/> | |
| Спасибо Павлу Ярковому. | |
| </para> | |
| <para lang="en"> | |
| the C-class network was not used as hash key in the "ip_hash" directive.<br/> | |
| Thanks to Pavel Yarkovoy. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если в строке "Content-Type" в заголовке ответа бэкенда был указан charset | |
| и строка завершалась символом ";", | |
| то в рабочем процессе мог произойти segmentation fault; | |
| ошибка появилась в 0.3.50. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in worker process | |
| if a charset was set in the "Content-Type" header line and the line | |
| has trailing ";"; | |
| the bug had appeared in 0.3.50. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки "[alert] zero size buf" при работе с FastCGI-сервером, если | |
| тело запроса, записанное во временный файл, было кратно 32K. | |
| </para> | |
| <para lang="en"> | |
| the "[alert] zero size buf" error when FastCGI server was used and | |
| a request body written in a temporary file was multiple of 32K. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на Solaris без параметра --with-debug; | |
| ошибка появилась в 0.5.15. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on Solaris without the --with-debug option; | |
| the bug had appeared in 0.5.15. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.5.15" date="2007-03-19"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| почтовый прокси-сервер поддерживает аутентифицированное SMTP-проксирование и | |
| директивы smtp_auth, smtp_capabilities и xclient.<br/> | |
| Спасибо Антону Южанинову и Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| the mail proxy supports authenticated SMTP proxying and | |
| the "smtp_auth", "smtp_capabilities", and "xclient" directives.<br/> | |
| Thanks to Anton Yuzhaninov and Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь keep-alive соединения закрываются сразу же по получении сигнала | |
| переконфигурации. | |
| </para> | |
| <para lang="en"> | |
| now the keep-alive connections are closed just after receiving | |
| the reconfiguration signal. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| директивы imap и auth переименованы соответственно в mail и pop3_auth. | |
| </para> | |
| <para lang="en"> | |
| the "imap" and "auth" directives were renamed | |
| to the "mail" and "pop3_auth" directives. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если использовался метод аутентификации CRAM-MD5 и не был разрешён метод APOP, | |
| то в рабочем процессе происходил segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault occurred in worker process | |
| if the CRAM-MD5 authentication method was used | |
| and the APOP method was disabled. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы starttls only в протоколе POP3 nginx | |
| разрешал аутентификацию без перехода в режим SSL. | |
| </para> | |
| <para lang="en"> | |
| if the "starttls only" directive was used in POP3 protocol, | |
| then nginx allowed authentication without switching to the SSL mode. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| рабочие процессы не выходили после переконфигурации и не переоткрывали логи, | |
| если использовался метод eventport. | |
| </para> | |
| <para lang="en"> | |
| worker processes did not exit after reconfiguration and | |
| did not rotate logs if the eventport method was used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы ip_hash рабочий процесс мог зациклиться. | |
| </para> | |
| <para lang="en"> | |
| a worker process may got caught in an endless loop, | |
| if the "ip_hash" directive was used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| теперь nginx не пишет в лог некоторые alert'ы, | |
| если используются методы eventport или /dev/poll. | |
| </para> | |
| <para lang="en"> | |
| now nginx does not log some alerts if eventport or /dev/poll methods are used. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.5.14" date="2007-02-23"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx игнорировал лишние закрывающие скобки "}" в конце | |
| конфигурационного файла. | |
| </para> | |
| <para lang="en"> | |
| nginx ignored superfluous closing "}" in the end of configuration file. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.5.13" date="2007-02-19"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| методы COPY и MOVE. | |
| </para> | |
| <para lang="en"> | |
| the COPY and MOVE methods. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_realip_module устанавливал мусор для запросов, | |
| переданных по keep-alive соединению. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_realip_module set garbage for requests passed via | |
| keep-alive connection. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не работал на 64-битном big-endian Linux.<br/> | |
| Спасибо Андрею Нигматулину. | |
| </para> | |
| <para lang="en"> | |
| nginx did not work on big-endian 64-bit Linux.<br/> | |
| Thanks to Andrei Nigmatulin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при получении слишком длинной команды IMAP/POP3-прокси теперь сразу | |
| закрывает соединение, а не по таймауту. | |
| </para> | |
| <para lang="en"> | |
| now when IMAP/POP3 proxy receives too long command it closes the connection | |
| right away, but not after timeout. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если при использовании метода epoll клиент закрывал преждевременно | |
| соединение со своей стороны, то nginx закрывал это соединение только | |
| по истечении таймаута на передачу. | |
| </para> | |
| <para lang="en"> | |
| if the "epoll" method was used and a client closed a connection prematurely, | |
| then nginx closed the connection after a send timeout only. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на платформах, отличных от i386, amd64, sparc и ppc; | |
| ошибка появилась в 0.5.8. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on platforms different from i386, amd64, sparc, | |
| and ppc; | |
| the bug had appeared in 0.5.8. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.5.12" date="2007-02-12"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на платформах, отличных от i386, amd64, sparc и ppc; | |
| ошибка появилась в 0.5.8. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on platforms different from i386, amd64, sparc, | |
| and ppc; | |
| the bug had appeared in 0.5.8. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании временных файлов в время работы с FastCGI-сервером | |
| в рабочем процессе мог произойти segmentation fault; | |
| ошибка появилась в 0.5.8. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in worker process | |
| if the temporary files were used while working with FastCGI server; | |
| the bug had appeared in 0.5.8. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если переменная $fastcgi_script_name записывалась в лог, | |
| то в рабочем процессе мог произойти segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in worker process | |
| if the $fastcgi_script_name variable was logged. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ngx_http_perl_module не собирался на Solaris. | |
| </para> | |
| <para lang="en"> | |
| ngx_http_perl_module could not be built on Solaris. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.5.11" date="2007-02-05"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь configure определяет библиотеку PCRE в MacPorts.<br/> | |
| Спасибо Chris McGrath. | |
| </para> | |
| <para lang="en"> | |
| now configure detects system PCRE library in MacPorts.<br/> | |
| Thanks to Chris McGrath. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ответ был неверным, если запрашивалось несколько диапазонов; | |
| ошибка появилась в 0.5.6. | |
| </para> | |
| <para lang="en"> | |
| the response was incorrect if several ranges were requested; | |
| the bug had appeared in 0.5.6. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива create_full_put_path не могла создавать промежуточные каталоги, | |
| если не была установлена директива dav_access.<br/> | |
| Спасибо Evan Miller. | |
| </para> | |
| <para lang="en"> | |
| the "create_full_put_path" directive could not create the intermediate | |
| directories if no "dav_access" directive was set.<br/> | |
| Thanks to Evan Miller. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| вместо кодов ошибок "400" и "408" в access_log мог записываться код "0". | |
| </para> | |
| <para lang="en"> | |
| the "0" response code might be logged in the access_log instead of | |
| the "400" and "408" error codes. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при сборке с оптимизацией -O2 в рабочем процессе мог произойти | |
| segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in worker process | |
| if nginx was built with -O2 optimization. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.5.10" date="2007-01-26"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| во время обновления исполняемого файла новый процесс не наследовал | |
| слушающие сокеты; | |
| ошибка появилась в 0.5.9. | |
| </para> | |
| <para lang="en"> | |
| while online executable file upgrade the new master process did not | |
| inherit the listening sockets; | |
| the bug had appeared in 0.5.9. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при сборке с оптимизацией -O2 в рабочем процессе мог произойти | |
| segmentation fault; | |
| ошибка появилась в 0.5.1. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur in worker process | |
| if nginx was built with -O2 optimization; | |
| the bug had appeared in 0.5.1. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.5.9" date="2007-01-25"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| модуль ngx_http_memcached_module теперь в качестве ключа использует | |
| значение переменной $memcached_key. | |
| </para> | |
| <para lang="en"> | |
| now the ngx_http_memcached_module uses the $memcached_key variable value | |
| as a key. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $memcached_key. | |
| </para> | |
| <para lang="en"> | |
| the $memcached_key variable. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр clean в директиве client_body_in_file_only. | |
| </para> | |
| <para lang="en"> | |
| the "clean" parameter in the "client_body_in_file_only" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива env. | |
| </para> | |
| <para lang="en"> | |
| the "env" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива sendfile работает внутри блока if. | |
| </para> | |
| <para lang="en"> | |
| the "sendfile" directive is available inside the "if" block. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь при ошибке записи в access_log nginx записывает сообщение в error_log, | |
| но не чаще одного раза в минуту. | |
| </para> | |
| <para lang="en"> | |
| now on failure of the writing to access nginx logs a message to error_log, | |
| but not more often than once a minute. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива "access_log off" не всегда запрещала запись в лог. | |
| </para> | |
| <para lang="en"> | |
| the "access_log off" directive did not always turn off the logging. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.5.8" date="2007-01-19"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если использовалась директива <nobr>"client_body_in_file_only on"</nobr> | |
| и тело запроса было небольшое, то мог произойти segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur if | |
| <nobr>"client_body_in_file_only on"</nobr> was used | |
| and a request body was small. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| происходил segmentation fault, если использовались директивы | |
| <nobr>"client_body_in_file_only on"</nobr> | |
| и <nobr>"proxy_pass_request_body off"</nobr> | |
| или <nobr>"fastcgi_pass_request_body off"</nobr>, | |
| и делался переход к следующему бэкенду. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault occurred if <nobr>"client_body_in_file_only on"</nobr> | |
| and <nobr>"proxy_pass_request_body off"</nobr> | |
| or <nobr>"fastcgi_pass_request_body off"</nobr> | |
| directives were used, and nginx switched to a next upstream. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если при использовании директивы "proxy_buffering off" соединение с клиентом | |
| было неактивно, то оно закрывалось по таймауту, заданному директивой | |
| send_timeout; | |
| ошибка появилась в 0.4.7. | |
| </para> | |
| <para lang="en"> | |
| if the "proxy_buffering off" directive was used and a client connection | |
| was non-active, then the connection was closed after send timeout; | |
| the bug had appeared in 0.4.7. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если при использовании метода epoll клиент закрывал преждевременно | |
| соединение со своей стороны, то nginx закрывал это соединение только | |
| по истечении таймаута на передачу. | |
| </para> | |
| <para lang="en"> | |
| if the "epoll" method was used and a client closed a connection prematurely, | |
| then nginx closed the connection after a send timeout only. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки "[alert] zero size buf" при работе с FastCGI-сервером. | |
| </para> | |
| <para lang="en"> | |
| the "[alert] zero size buf" error when FastCGI server was used. | |
| </para> | |
| </change> | |
| <change> | |
| <para lang="ru"> | |
| Исправление ошибок в директиве limit_zone. | |
| </para> | |
| <para lang="en"> | |
| Bugfixes in the "limit_zone" directive. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.5.7" date="2007-01-15"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| оптимизация использования памяти в ssl_session_cache. | |
| </para> | |
| <para lang="en"> | |
| the ssl_session_cache storage optimization. | |
| </para> | |
| </change> | |
| <change> | |
| <para lang="ru"> | |
| Исправление ошибок в директивах ssl_session_cache и limit_zone. | |
| </para> | |
| <para lang="en"> | |
| Bugfixes in the "ssl_session_cache" and "limit_zone" directives. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| на старте или во время переконфигурации происходил segmentation fault, | |
| если директивы ssl_session_cache или limit_zone использовались | |
| на 64-битных платформах. | |
| </para> | |
| <para lang="en"> | |
| the segmentation fault was occurred on start or while reconfiguration | |
| if the "ssl_session_cache" or "limit_zone" directives were used | |
| on 64-bit platforms. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директив add_before_body или add_after_body происходил | |
| segmentation fault, если в заголовке ответа нет строки "Content-Type". | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault occurred if the "add_before_body" or "add_after_body" | |
| directives were used and there was no "Content-Type" header line in response. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| библиотека OpenSSL всегда собиралась с поддержкой потоков.<br/> | |
| Спасибо Дену Иванову. | |
| </para> | |
| <para lang="en"> | |
| the OpenSSL library was always built with the threads support.<br/> | |
| Thanks to Den Ivanov. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| совместимость библиотеки PCRE-6.5+ и компилятора icc. | |
| </para> | |
| <para lang="en"> | |
| the PCRE-6.5+ library and the icc compiler compatibility. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.5.6" date="2007-01-09"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь модуль ngx_http_index_module игнорирует все методы, | |
| кроме GET, HEAD и POST. | |
| </para> | |
| <para lang="en"> | |
| now the ngx_http_index_module ignores all methods except the GET, HEAD, and | |
| POST methods. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_limit_zone_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_limit_zone_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $binary_remote_addr. | |
| </para> | |
| <para lang="en"> | |
| the $binary_remote_addr variable. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы ssl_session_cache модулей ngx_http_ssl_module и ngx_imap_ssl_module. | |
| </para> | |
| <para lang="en"> | |
| the "ssl_session_cache" directives | |
| of the ngx_http_ssl_module and ngx_imap_ssl_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| метод DELETE поддерживает рекурсивное удаление. | |
| </para> | |
| <para lang="en"> | |
| the DELETE method supports recursive removal. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании $r->sendfile() byte-ranges передавались неверно. | |
| </para> | |
| <para lang="en"> | |
| the byte-ranges were transferred incorrectly if the $r->sendfile() was used. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.5.5" date="2006-12-24"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| ключ -v больше не выводит информацию о компиляторе. | |
| </para> | |
| <para lang="en"> | |
| the -v switch does not show compiler information any more. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| ключ -V. | |
| </para> | |
| <para lang="en"> | |
| the -V switch. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива worker_rlimit_core поддерживает указание размера в K, M и G. | |
| </para> | |
| <para lang="en"> | |
| the "worker_rlimit_core" directive supports size in K, M, and G. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль nginx.pm теперь может устанавливаться непривилегированным пользователем. | |
| </para> | |
| <para lang="en"> | |
| the nginx.pm module now could be installed by an unprivileged user. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании методов $r->request_body или $r->request_body_file мог | |
| произойти segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur if the $r->request_body or | |
| $r->request_body_file methods were used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибок, специфичных для платформы ppc. | |
| </para> | |
| <para lang="en"> | |
| the ppc platform specific bugs. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.5.4" date="2006-12-15"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директиву perl можно использовать внутри блока limit_except. | |
| </para> | |
| <para lang="en"> | |
| the "perl" directive may be used inside the "limit_except" block. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_dav_module требовал строку "Date" в заголовке запроса | |
| для метода DELETE. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_dav_module required the "Date" request header line | |
| for the DELETE method. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании одного параметра в директиве dav_access nginx мог | |
| сообщить об ошибке в конфигурации. | |
| </para> | |
| <para lang="en"> | |
| if one only parameter was used in the "dav_access" directive, then | |
| nginx might report about configuration error. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании переменной $host мог произойти segmentation fault; | |
| ошибка появилась в 0.4.14. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur if the $host variable was used; | |
| the bug had appeared in 0.4.14. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.5.3" date="2006-12-13"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_perl_module поддерживает методы $r->status, $r->log_error | |
| и $r->sleep. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_perl_module supports the $r->status, $r->log_error, | |
| and $r->sleep methods. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| метод $r->variable поддерживает переменные, неописанные в конфигурации nginx'а. | |
| </para> | |
| <para lang="en"> | |
| the $r->variable method supports variables that do not exist in nginx | |
| configuration. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| метод $r->has_request_body не работал. | |
| </para> | |
| <para lang="en"> | |
| the $r->has_request_body method did not work. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.5.2" date="2006-12-11"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если в директивах proxy_pass использовалось имя, указанное в upstream, | |
| то nginx пытался найти IP-адрес этого имени; | |
| ошибка появилась в 0.5.1. | |
| </para> | |
| <para lang="en"> | |
| if the "proxy_pass" directive used the name of the "upstream" block, | |
| then nginx tried to resolve the name; | |
| the bug had appeared in 0.5.1. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.5.1" date="2006-12-11"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива post_action могла не работать после неудачного завершения запроса. | |
| </para> | |
| <para lang="en"> | |
| the "post_action" directive might not run after a unsuccessful completion | |
| of a request. | |
| </para> | |
| </change> | |
| <change type="workaround"> | |
| <para lang="ru"> | |
| обход ошибки в Eudora для Mac; | |
| ошибка появилась в 0.4.11.<br/> | |
| Спасибо Bron Gondwana. | |
| </para> | |
| <para lang="en"> | |
| for Eudora for Mac; | |
| the bug had appeared in 0.4.11.<br/> | |
| Thanks to Bron Gondwana. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при указании в директиве fastcgi_pass имени описанного upstream'а выдавалось | |
| сообщение "no port in upstream"; | |
| ошибка появилась в 0.5.0. | |
| </para> | |
| <para lang="en"> | |
| if the "upstream" name was used in the "fastcgi_pass", then the message | |
| "no port in upstream" was issued; | |
| the bug had appeared in 0.5.0. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если в директивах proxy_pass и fastcgi_pass использовались одинаковых имена | |
| серверов, но с разными портами, то эти директивы использовали первый | |
| описанный порт; | |
| ошибка появилась в 0.5.0. | |
| </para> | |
| <para lang="en"> | |
| if the "proxy_pass" and "fastcgi_pass" directives used the same servers but | |
| different ports, then these directives uses the first described port; | |
| the bug had appeared in 0.5.0. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если в директивах proxy_pass и fastcgi_pass использовались unix domain сокеты, | |
| то эти директивы использовали первый описанный сокет; | |
| ошибка появилась в 0.5.0. | |
| </para> | |
| <para lang="en"> | |
| if the "proxy_pass" and "fastcgi_pass" directives used the unix domain sockets, | |
| then these directives used first described socket; | |
| the bug had appeared in 0.5.0. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ngx_http_auth_basic_module игнорировал пользователя, если он был указан | |
| в последней строке файла паролей и после пароля не было перевода строки, | |
| возврата каретки или символа ":". | |
| </para> | |
| <para lang="en"> | |
| ngx_http_auth_basic_module ignored the user if it was in the last line in | |
| the password file and there was no the carriage return, the line feed, | |
| or the ":" symbol after the password. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| переменная $upstream_response_time могла быть равна "0.000", хотя время | |
| обработки было больше 1 миллисекунды. | |
| </para> | |
| <para lang="en"> | |
| the $upstream_response_time variable might be equal to "0.000", although | |
| response time was more than 1 millisecond. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.5.0" date="2006-12-04"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| параметры в виде "%name" в директиве log_format больше не поддерживаются. | |
| </para> | |
| <para lang="en"> | |
| the parameters in the "%name" form in the "log_format" directive | |
| are not supported anymore. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| директивы proxy_upstream_max_fails, proxy_upstream_fail_timeout, | |
| fastcgi_upstream_max_fails, и fastcgi_upstream_fail_timeout, | |
| memcached_upstream_max_fails и memcached_upstream_fail_timeout | |
| больше не поддерживаются. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_upstream_max_fails", "proxy_upstream_fail_timeout", | |
| "fastcgi_upstream_max_fails", "fastcgi_upstream_fail_timeout", | |
| "memcached_upstream_max_fails", and "memcached_upstream_fail_timeout" | |
| directives are not supported anymore. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива server в блоке upstream поддерживает параметры | |
| max_fails, fail_timeout и down. | |
| </para> | |
| <para lang="en"> | |
| the "server" directive in the "upstream" context supports | |
| the "max_fails", "fail_timeout", and "down" parameters. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива ip_hash в блоке upstream. | |
| </para> | |
| <para lang="en"> | |
| the "ip_hash" directive inside the "upstream" block. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| статус WAIT в строке "Auth-Status" в заголовке ответа сервера аутентификации | |
| IMAP/POP3 прокси. | |
| </para> | |
| <para lang="en"> | |
| the WAIT status in the "Auth-Status" header line of the IMAP/POP3 proxy | |
| authentication server response. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на 64-битных платформах; | |
| ошибка появилась в 0.4.14. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on 64-bit platforms; | |
| the bug had appeared in 0.4.14. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.4.14" date="2006-11-27"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива proxy_pass_error_message в IMAP/POP3 прокси. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_pass_error_message" directive in IMAP/POP3 proxy. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь configure определяет библиотеку PCRE на FreeBSD, Linux и NetBSD. | |
| </para> | |
| <para lang="en"> | |
| now configure detects system PCRE library on FreeBSD, Linux, and NetBSD. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ngx_http_perl_module не работал с перлом, собранным с поддержкой потоков; | |
| ошибка появилась в 0.3.38. | |
| </para> | |
| <para lang="en"> | |
| ngx_http_perl_module did not work with perl built with the threads support; | |
| the bug had appeared in 0.3.38. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ngx_http_perl_module не работал корректно, если перл вызывался рекурсивно. | |
| </para> | |
| <para lang="en"> | |
| ngx_http_perl_module did not work if perl was called recursively. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx игнорировал имя сервера в строке запроса. | |
| </para> | |
| <para lang="en"> | |
| nginx ignored a host name in a request line. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если FastCGI сервер передавал много в stderr, | |
| то рабочий процесс мог зациклиться. | |
| </para> | |
| <para lang="en"> | |
| a worker process may got caught in an endless loop, | |
| if a FastCGI server sent too many data to the stderr. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при изменении системного времени переменная $upstream_response_time | |
| могла быть отрицательной. | |
| </para> | |
| <para lang="en"> | |
| the $upstream_response_time variable may be negative if the system time | |
| was changed backward. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании POP3 серверу аутентификации IMAP/POP3 прокси | |
| не передавался параметр Auth-Login-Attempt. | |
| </para> | |
| <para lang="en"> | |
| the "Auth-Login-Attempt" parameter was not sent to | |
| IMAP/POP3 proxy authentication server when POP3 was used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при ошибке соединения с сервером аутентификации IMAP/POP3 прокси | |
| мог произойти segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur if connect to IMAP/POP3 proxy | |
| authentication server failed. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.4.13" date="2006-11-15"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директиву proxy_pass можно использовать внутри блока limit_except. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_pass" directive may be used inside the "limit_except" block. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива limit_except поддерживает все WebDAV методы. | |
| </para> | |
| <para lang="en"> | |
| the "limit_except" directive supports all WebDAV methods. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы add_before_body без директивы add_after_body | |
| ответ передавался не полностью. | |
| </para> | |
| <para lang="en"> | |
| if the "add_before_body" directive was used without | |
| the "add_after_body" directive, then a response did not transferred complete. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| большое тело запроса не принималось, если использовались метод epoll | |
| и deferred accept(). | |
| </para> | |
| <para lang="en"> | |
| a large request body did not receive if the epoll method | |
| and the deferred accept() were used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| для ответов модуля ngx_http_autoindex_module не выставлялась кодировка; | |
| ошибка появилась в 0.3.50. | |
| </para> | |
| <para lang="en"> | |
| a charset could not be set for ngx_http_autoindex_module responses; | |
| the bug had appeared in 0.3.50. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки "[alert] zero size buf" при работе с FastCGI-сервером; | |
| </para> | |
| <para lang="en"> | |
| the "[alert] zero size buf" error when FastCGI server was used; | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| параметр конфигурации --group= игнорировался.<br/> | |
| Спасибо Thomas Moschny. | |
| </para> | |
| <para lang="en"> | |
| the --group= configuration parameter was ignored.<br/> | |
| Thanks to Thomas Moschny. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| 50-й подзапрос в SSI ответе не работал; | |
| ошибка появилась в 0.3.50. | |
| </para> | |
| <para lang="en"> | |
| the 50th subrequest in SSI response did not work; | |
| the bug had appeared in 0.3.50. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.4.12" date="2006-10-31"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_perl_module поддерживает метод $r->variable. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_perl_module supports the $r->variable method. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при включении в ответ большого статического файла с помощью SSI | |
| ответ мог передаваться не полностью. | |
| </para> | |
| <para lang="en"> | |
| if a big static file was included using SSI in a response, | |
| then the response may be transferred incomplete. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не убирал "#fragment" в URI. | |
| </para> | |
| <para lang="en"> | |
| nginx did not omit the "#fragment" part in URI. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.4.11" date="2006-10-25"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| POP3 прокси поддерживает AUTH LOGIN PLAIN и CRAM-MD5. | |
| </para> | |
| <para lang="en"> | |
| the POP3 proxy supports the AUTH LOGIN PLAIN and CRAM-MD5. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_perl_module поддерживает метод $r->allow_ranges. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_perl_module supports the $r->allow_ranges method. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при включённой поддержке команды APOP в POP3 прокси могли | |
| не работать команды USER/PASS; | |
| ошибка появилась в 0.4.10. | |
| </para> | |
| <para lang="en"> | |
| if the APOP was enabled in the POP3 proxy, then the USER/PASS commands | |
| might not work; | |
| the bug had appeared in 0.4.10. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.4.10" date="2006-10-23"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| POP3 прокси поддерживает APOP. | |
| </para> | |
| <para lang="en"> | |
| the POP3 proxy supports the APOP command. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании методов select, poll и /dev/poll во время ожидания | |
| ответа от сервера аутентификации IMAP/POP3 прокси нагружал процессор. | |
| </para> | |
| <para lang="en"> | |
| if the select, poll or /dev/poll methods were used, then while | |
| waiting authentication server response the IMAP/POP3 proxy hogged CPU. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании переменной $server_addr в директиве map мог | |
| произойти segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault might occur if the $server_addr variable was used | |
| in the "map" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_flv_module не поддерживал byte ranges для полных ответов; | |
| ошибка появилась в 0.4.7. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_flv_module did not support the byte ranges for full responses; | |
| the bug had appeared in 0.4.7. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на Debian amd64; | |
| ошибка появилась в 0.4.9. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on Debian amd64; | |
| the bug had appeared in 0.4.9. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.4.9" date="2006-10-13"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр set в команде SSI include. | |
| </para> | |
| <para lang="en"> | |
| the "set" parameter in the "include" SSI command. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_perl_module теперь проверяет версию модуля nginx.pm. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_perl_module now tests the nginx.pm module version. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.4.8" date="2006-10-11"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если до команды SSI include с параметром wait выполнялась ещё | |
| одна команда SSI include, то параметр wait мог не работать. | |
| </para> | |
| <para lang="en"> | |
| if an "include" SSI command were before another "include" SSI command | |
| with a "wait" parameter, then the "wait" parameter might not work. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_flv_module добавлял FLV-заголовок для полных ответов.<br/> | |
| Спасибо Алексею Ковырину. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_flv_module added the FLV header to the full responses.<br/> | |
| Thanks to Alexey Kovyrin. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.4.7" date="2006-10-10"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_flv_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_flv_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $request_body_file. | |
| </para> | |
| <para lang="en"> | |
| the $request_body_file variable. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы charset и source_charset поддерживают переменные. | |
| </para> | |
| <para lang="en"> | |
| the "charset" and "source_charset" directives support the variables. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если до команды SSI include с параметром wait выполнялась ещё | |
| одна команда SSI include, то параметр wait мог не работать. | |
| </para> | |
| <para lang="en"> | |
| if an "include" SSI command were before another "include" SSI command | |
| with a "wait" parameter, then the "wait" parameter might not work. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании директивы "proxy_buffering off" или при работе | |
| с memcached соединения могли не закрываться по таймауту. | |
| </para> | |
| <para lang="en"> | |
| if the "proxy_buffering off" directive was used or while working with | |
| memcached the connections might not be closed on timeout. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не запускался на 64-битных платформах, отличных от amd64, sparc64 и ppc64. | |
| </para> | |
| <para lang="en"> | |
| nginx did not run on 64-bit platforms except amd64, sparc64, and ppc64. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.4.6" date="2006-10-06"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не запускался на 64-битных платформах, отличных от amd64, sparc64 и ppc64. | |
| </para> | |
| <para lang="en"> | |
| nginx did not run on 64-bit platforms except amd64, sparc64, and ppc64. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при запросе версии HTTP/1.1 nginx передавал ответ chunk'ами, | |
| если длина ответа в методе $r->headers_out("Content-Length", ...) | |
| была задана текстовой строкой. | |
| </para> | |
| <para lang="en"> | |
| nginx sent the chunked response for HTTP/1.1 request,<br/> | |
| if its length was set by text string in | |
| the $r->headers_out("Content-Length", ...) method. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| после перенаправления ошибки с помощью директивы error_page любая директива | |
| модуля ngx_http_rewrite_module возвращала эту ошибку; | |
| ошибка появилась в 0.4.4. | |
| </para> | |
| <para lang="en"> | |
| after redirecting error by an "error_page" directive | |
| any ngx_http_rewrite_module directive returned this error code; | |
| the bug had appeared in 0.4.4. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.4.5" date="2006-10-02"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на Linux и Solaris; | |
| ошибка появилась в 0.4.4. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on Linux and Solaris; | |
| the bug had appeared in 0.4.4. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.4.4" date="2006-10-02"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $scheme. | |
| </para> | |
| <para lang="en"> | |
| the $scheme variable. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива expires поддерживает параметр max. | |
| </para> | |
| <para lang="en"> | |
| the "expires" directive supports the "max" parameter. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива include поддерживает маску "*".<br/> | |
| Спасибо Jonathan Dance. | |
| </para> | |
| <para lang="en"> | |
| the "include" directive supports the "*" mask.<br/> | |
| Thanks to Jonathan Dance. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива return всегда изменяла код ответа, перенаправленного | |
| директивой error_page. | |
| </para> | |
| <para lang="en"> | |
| the "return" directive always overrode the "error_page" response code | |
| redirected by the "error_page" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| происходил segmentation fault, если в методе PUT передавалось | |
| тело нулевой длины. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault occurred if zero-length body was in PUT method. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании переменных в директиве proxy_redirect редирект | |
| изменялся неверно. | |
| </para> | |
| <para lang="en"> | |
| the redirect was changed incorrectly if the variables were used | |
| in the "proxy_redirect" directive. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.4.3" date="2006-09-26"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| ошибку 499 теперь нельзя перенаправить с помощью директивы error_page. | |
| </para> | |
| <para lang="en"> | |
| now the 499 error could not be redirected using an "error_page" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка Solaris 10 event ports. | |
| </para> | |
| <para lang="en"> | |
| the Solaris 10 event ports support. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_browser_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_browser_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при перенаправлении ошибки 400 проксированному серверу | |
| помощью директивы error_page мог произойти segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault may occur while redirecting the 400 error | |
| to the proxied server using a "proxy_pass" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| происходил segmentation fault, если в директиве proxy_pass использовался | |
| unix domain сокет; | |
| ошибка появилась в 0.3.47. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault occurred if an unix domain socket was used in | |
| a "proxy_pass" directive; | |
| the bug had appeared in 0.3.47. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| SSI не работал с ответами memcached и небуферизированными проксированными | |
| ответами. | |
| </para> | |
| <para lang="en"> | |
| SSI did work with memcached and nonbuffered responses. | |
| </para> | |
| </change> | |
| <change type="workaround"> | |
| <para lang="ru"> | |
| обход ошибки PAUSE hardware capability в Sun Studio. | |
| </para> | |
| <para lang="en"> | |
| of the Sun Studio PAUSE hardware capability bug. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.4.2" date="2006-09-14"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| убрана поддержка флага O_NOATIME на Linux; | |
| ошибка появилась в 0.4.1. | |
| </para> | |
| <para lang="en"> | |
| the O_NOATIME flag support on Linux was canceled; | |
| the bug had appeared in 0.4.1. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.4.1" date="2006-09-14"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| совместимость с DragonFlyBSD.<br/> | |
| Спасибо Павлу Назарову. | |
| </para> | |
| <para lang="en"> | |
| the DragonFlyBSD compatibility.<br/> | |
| Thanks to Pavel Nazarov. | |
| </para> | |
| </change> | |
| <change type="workaround"> | |
| <para lang="ru"> | |
| обход ошибки в sendfile() в 64-битном Linux при передаче файлов больше 2G. | |
| </para> | |
| <para lang="en"> | |
| of bug in 64-bit Linux sendfile(), when file is more than 2G. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь на Linux nginx для статических запросов использует флаг O_NOATIME.<br/> | |
| Спасибо Yusuf Goolamabbas. | |
| </para> | |
| <para lang="en"> | |
| now on Linux nginx uses O_NOATIME flag for static requests.<br/> | |
| Thanks to Yusuf Goolamabbas. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.4.0" date="2006-08-30"> | |
| <change> | |
| <para lang="ru"> | |
| Изменение во внутреннем API: инициализация модулей HTTP перенесена из фазы | |
| init module в фазу HTTP postconfiguration. | |
| </para> | |
| <para lang="en"> | |
| Change in internal API: the HTTP modules initialization was moved | |
| from the init module phase to the HTTP postconfiguration phase. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь тело запроса в модуле ngx_http_perl_module не считывается | |
| заранее: нужно явно инициировать чтение с помощью метода $r->has_request_body. | |
| </para> | |
| <para lang="en"> | |
| now the request body is not read beforehand for the ngx_http_perl_module: | |
| it's required to start the reading using the $r->has_request_body method. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_perl_module поддерживает код возврата DECLINED. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_perl_module supports the DECLINED return code. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_dav_module поддерживает входящую строку заголовка "Date" | |
| для метода PUT. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_dav_module supports the incoming "Date" header line | |
| for the PUT method. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива ssi работает внутри блока if. | |
| </para> | |
| <para lang="en"> | |
| the "ssi" directive is available inside the "if" block. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| происходил segmentation fault, если в директиве index использовалась | |
| переменные и при этом первое имя индексного файла было без переменных; | |
| ошибка появилась в 0.1.29. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault occurred if there was an "index" directive with | |
| variables and the first index name was without variables; | |
| the bug had appeared in 0.1.29. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.61" date="2006-08-28"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| директива tcp_nodelay теперь по умолчанию включена. | |
| </para> | |
| <para lang="en"> | |
| now the "tcp_nodelay" directive is turned on by default. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива msie_refresh. | |
| </para> | |
| <para lang="en"> | |
| the "msie_refresh" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива recursive_error_pages. | |
| </para> | |
| <para lang="en"> | |
| the "recursive_error_pages" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива rewrite возвращала неправильный редирект, если редирект | |
| включал в себя выделенные закодированные символы из оригинального URI. | |
| </para> | |
| <para lang="en"> | |
| the "rewrite" directive returned incorrect redirect, if the redirect | |
| had the captured escaped symbols from original URI. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.60" date="2006-08-18"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| во время перенаправления ошибки рабочий процесс мог зациклиться; | |
| ошибка появилась в 0.3.59. | |
| </para> | |
| <para lang="en"> | |
| a worker process may got caught in an endless loop | |
| while an error redirection; | |
| the bug had appeared in 0.3.59. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.59" date="2006-08-16"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь можно делать несколько перенаправлений через директиву error_page. | |
| </para> | |
| <para lang="en"> | |
| now is possible to do several redirection using the "error_page" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива dav_access не поддерживала три параметра. | |
| </para> | |
| <para lang="en"> | |
| the "dav_access" directive did not support three parameters. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива error_page не изменяла строку "Content-Type" | |
| после перенаправления с помощью "X-Accel-Redirect"; | |
| ошибка появилась в 0.3.58. | |
| </para> | |
| <para lang="en"> | |
| the "error_page" directive did not changes the "Content-Type" header line | |
| after the "X-Accel-Redirect" was used; | |
| the bug had appeared in 0.3.58. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.58" date="2006-08-14"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива error_page поддерживает переменные. | |
| </para> | |
| <para lang="en"> | |
| the "error_page" directive supports the variables. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь на Linux используется интерфейс procfs вместо sysctl. | |
| </para> | |
| <para lang="en"> | |
| now the procfs interface instead of sysctl is used on Linux. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь при использовании "X-Accel-Redirect" строка "Content-Type" наследуется | |
| из первоначального ответа. | |
| </para> | |
| <para lang="en"> | |
| now the "Content-Type" header line is inherited from first response | |
| when the "X-Accel-Redirect" was used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива error_page не перенаправляла ошибку 413. | |
| </para> | |
| <para lang="en"> | |
| the "error_page" directive did not redirect the 413 error. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| завершающий "?" не удалял старые аргументы, если в переписанном URI | |
| не было новых аргументов. | |
| </para> | |
| <para lang="en"> | |
| the trailing "?" did not remove old arguments if no new arguments | |
| were added to a rewritten URI. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не запускался на 64-битной FreeBSD 7.0-CURRENT. | |
| </para> | |
| <para lang="en"> | |
| nginx could not run on 64-bit FreeBSD 7.0-CURRENT. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.57" date="2006-08-09"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $ssl_client_serial. | |
| </para> | |
| <para lang="en"> | |
| the $ssl_client_serial variable. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в операторе "!-e" в директиве if.<br/> | |
| Спасибо Андриану Буданцову. | |
| </para> | |
| <para lang="en"> | |
| in the "!-e" operator of the "if" directive.<br/> | |
| Thanks to Andrian Budanstov. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при проверке клиентского сертификата nginx не передавал клиенту | |
| информацию о требуемых сертификатах. | |
| </para> | |
| <para lang="en"> | |
| while a client certificate verification nginx did not send to a client | |
| the required certificates information. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| переменная $document_root не поддерживала переменные в директиве root. | |
| </para> | |
| <para lang="en"> | |
| the $document_root variable did not support the variables in the "root" | |
| directive. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.56" date="2006-08-04"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива dav_access. | |
| </para> | |
| <para lang="en"> | |
| the "dav_access" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива if поддерживает операторы "-d", "!-d", "-e", "!-e", "-x" и "!-x". | |
| </para> | |
| <para lang="en"> | |
| the "if" directive supports the "-d", "!-d", "-e", "!-e", "-x", and "!-x" | |
| operators. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при записи в access_log некоторых передаваемых клиенту строк заголовков | |
| происходил segmentation fault, если запрос возвращал редирект. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault occurred if a request returned a redirect and | |
| some sent to client header lines were logged in the access log. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.55" date="2006-07-28"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр stub в команде SSI include. | |
| </para> | |
| <para lang="en"> | |
| the "stub" parameter in the "include" SSI command. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| команда SSI block. | |
| </para> | |
| <para lang="en"> | |
| the "block" SSI command. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| скрипт unicode2nginx добавлен в contrib. | |
| </para> | |
| <para lang="en"> | |
| the unicode2nginx script was added to contrib. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если root был задан только переменной, то корень задавался | |
| относительно префикса сервера. | |
| </para> | |
| <para lang="en"> | |
| if a "root" was specified by variable only, then the root was relative | |
| to a server prefix. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если в запросе был "//" или "/.", и после этого закодированные | |
| символы в виде "%XX", то проксируемый запрос передавался незакодированным. | |
| </para> | |
| <para lang="en"> | |
| if the request contained "//" or "/./" and escaped symbols after them, | |
| then the proxied request was sent unescaped. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| метод $r->header_in("Cookie") модуля ngx_http_perl_module теперь возвращает | |
| все строки "Cookie" в заголовке запроса. | |
| </para> | |
| <para lang="en"> | |
| the $r->header_in("Cookie") of the ngx_http_perl_module now returns | |
| all "Cookie" header lines. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| происходил segmentation fault, если использовался | |
| <nobr>"client_body_in_file_only on"</nobr> | |
| и делался переход к следующему бэкенду. | |
| </para> | |
| <para lang="en"> | |
| a segmentation fault occurred if <nobr>"client_body_in_file_only on"</nobr> | |
| was used and nginx switched to a next upstream. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при некоторых условиях во время переконфигурации коды символов | |
| внутри директивы charset_map могли считаться неверными; | |
| ошибка появилась в 0.3.50. | |
| </para> | |
| <para lang="en"> | |
| on some condition while reconfiguration character codes | |
| inside the "charset_map" may be treated invalid; | |
| the bug had appeared in 0.3.50. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.54" date="2006-07-11"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| nginx теперь записывает в лог информацию о подзапросах. | |
| </para> | |
| <para lang="en"> | |
| nginx now logs the subrequest information to the error log. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы proxy_next_upstream, fastcgi_next_upstream и memcached_next_upstream | |
| поддерживают параметр off. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_next_upstream", "fastcgi_next_upstream", | |
| and "memcached_next_upstream" directives support the "off" parameter. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива debug_connection поддерживает запись адресов в формате CIDR. | |
| </para> | |
| <para lang="en"> | |
| the "debug_connection" directive supports the CIDR address form. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при перекодировании ответа проксированного сервера или сервера FastCGI | |
| в UTF-8 или наоборот ответ мог передаваться не полностью. | |
| </para> | |
| <para lang="en"> | |
| if a response of proxied server or FastCGI server was converted from UTF-8 | |
| or back, then it may be transferred incomplete. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| переменная $upstream_response_time содержала время только первого | |
| обращения к бэкенду. | |
| </para> | |
| <para lang="en"> | |
| the $upstream_response_time variable had the time of the first | |
| request to a backend only. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на платформе amd64; | |
| ошибка появилась в 0.3.53. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on amd64 platform; | |
| the bug had appeared in 0.3.53. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.53" date="2006-07-07"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| директива add_header добавляет строки в ответы с кодом 204, 301 и 302. | |
| </para> | |
| <para lang="en"> | |
| the "add_header" directive adds the string to 204, 301, and 302 responses. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива server в блоке upstream поддерживает параметр weight. | |
| </para> | |
| <para lang="en"> | |
| the "server" directive in the "upstream" context supports | |
| the "weight" parameter. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива server_name поддерживает маску "*". | |
| </para> | |
| <para lang="en"> | |
| the "server_name" directive supports the "*" wildcard. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| nginx поддерживает тело запроса больше 2G. | |
| </para> | |
| <para lang="en"> | |
| nginx supports the request body size more than 2G. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если при использовании "satisfy_any on" клиент успешно проходил аутентификацию, | |
| в лог всё равно записалоcь сообщение "access forbidden by rule". | |
| </para> | |
| <para lang="en"> | |
| if a client was successfully authorized using "satisfy_any on", then anyway | |
| the message "access forbidden by rule" was written in the log. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| метод PUT мог ошибочно не создать файл и вернуть код 409. | |
| </para> | |
| <para lang="en"> | |
| the "PUT" method may erroneously not create a file and return the 409 code. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если во время аутентификации IMAP/POP3 бэкенд возвращал ошибку, nginx | |
| продолжал проксирование. | |
| </para> | |
| <para lang="en"> | |
| if the IMAP/POP3 backend returned an error, then nginx continued proxying | |
| anyway. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.52" date="2006-07-03"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| восстановлено поведение модуля ngx_http_index_module для запросов "POST /": | |
| как в версии до 0.3.40, модуль теперь не выдаёт ошибку 405. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_index_module behavior for the "POST /" requests is reverted | |
| to the 0.3.40 version state: the module now does not return the 405 error. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании ограничения скорости рабочий процесс мог зациклиться; | |
| ошибка появилась в 0.3.37. | |
| </para> | |
| <para lang="en"> | |
| the worker process may got caught in an endless loop if the limit rate was used; | |
| the bug had appeared in 0.3.37. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_charset_module записывал в лог ошибку "unknown charset", | |
| даже если перекодировка не требовалась; | |
| ошибка появилась в 0.3.50. | |
| </para> | |
| <para lang="en"> | |
| ngx_http_charset_module logged "unknown charset" alert, even if the recoding | |
| was not needed; | |
| the bug had appeared in 0.3.50. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если в результате запроса PUT возвращался код 409, то временный файл | |
| не удалялся. | |
| </para> | |
| <para lang="en"> | |
| if a code response of the PUT request was 409, then a temporary file | |
| was not removed. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.51" date="2006-06-30"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при некоторых условиях в SSI мог пропадать символы "<"; | |
| ошибка появилась в 0.3.50. | |
| </para> | |
| <para lang="en"> | |
| the "<" symbols might disappeared some conditions in the SSI; | |
| the bug had appeared in 0.3.50. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.50" date="2006-06-28"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| директивы proxy_redirect_errors и fastcgi_redirect_errors | |
| переименованы соответственно в proxy_intercept_errors и | |
| fastcgi_intercept_errors. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_redirect_errors" and "fastcgi_redirect_errors" directives | |
| was renamed to the "proxy_intercept_errors" and | |
| "fastcgi_intercept_errors" directives. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_charset_module поддерживает перекодирование из | |
| однобайтных кодировок в UTF-8 и обратно. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_charset_module supports the recoding from the single byte | |
| encodings to the UTF-8 encoding and back. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| в режиме прокси и FastCGI поддерживается строка заголовка "X-Accel-Charset" | |
| в ответе бэкенда. | |
| </para> | |
| <para lang="en"> | |
| the "X-Accel-Charset" response header line is supported in proxy | |
| and FastCGI mode. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| символ "\" в парах "\"" и "\'" в SSI командах убирался, только если | |
| также использовался символ "$". | |
| </para> | |
| <para lang="en"> | |
| the "\" escape symbol in the "\"" and "\'" pairs in the SSI command | |
| was removed only if the command also has the "$" symbol. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при некоторых условиях в SSI после вставки могла быть добавлена | |
| строка "<!--". | |
| </para> | |
| <para lang="en"> | |
| the "<!--" string might be added on some conditions | |
| in the SSI after inclusion. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если в заголовке ответа была строка <nobr>"Content-Length: 0",</nobr> | |
| то при использовании небуферизированного проксировании не закрывалось соединение | |
| с клиентом. | |
| </para> | |
| <para lang="en"> | |
| if the "Content-Length: 0" header line was in response, then | |
| in nonbuffered proxying mode the client connection was not closed. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.49" date="2006-05-31"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве set. | |
| </para> | |
| <para lang="en"> | |
| in the "set" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при включении в ssi двух и более подзапросов, обрабатываемых через FastCGI, | |
| вместо вывода второго и остальных подзапросов в ответ включался вывод | |
| первого подзапроса. | |
| </para> | |
| <para lang="en"> | |
| if two or more FastCGI subrequests was in SSI, then first subrequest output | |
| was included instead of second and following subrequests. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.48" date="2006-05-29"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь модуль ngx_http_charset_module работает для подзапросов, | |
| в ответах которых нет строки заголовка "Content-Type". | |
| </para> | |
| <para lang="en"> | |
| now the ngx_http_charset_module works for subrequests, | |
| if the response has no "Content-Type" header line. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если в директиве proxy_pass не было URI, | |
| то директива "proxy_redirect default" добавляла в переписанный | |
| редирект в начало лишний слэш. | |
| </para> | |
| <para lang="en"> | |
| if the "proxy_pass" directive has no URI part, | |
| then the "proxy_redirect default" directive add the unnecessary slash | |
| in start of the rewritten redirect. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| внутренний редирект всегда превращал любой HTTP-метод в GET, | |
| теперь это делается только для редиректов, выполняемых с помощью | |
| X-Accel-Redirect, и у которых метод не равен HEAD; | |
| ошибка появилась в 0.3.42. | |
| </para> | |
| <para lang="en"> | |
| the internal redirect always transform client's HTTP method to GET, | |
| now the transformation is made for the "X-Accel-Redirect" redirects only | |
| and if the method is not HEAD; | |
| the bug had appeared in 0.3.42. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_perl_module не собирался, если перл был с поддержкой потоков; | |
| ошибка появилась в 0.3.46. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_perl_module could not be built, if the perl was built | |
| with the threads support; | |
| the bug had appeared in 0.3.46. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.47" date="2006-05-23"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива upstream. | |
| </para> | |
| <para lang="en"> | |
| the "upstream" directive. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| символ "\" в парах "\"" и "\'" в SSI командах теперь всегда убирается. | |
| </para> | |
| <para lang="en"> | |
| now the "\" escape symbol in the "\"" and "\'" pairs in the SSI command | |
| is always removed. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.46" date="2006-05-11"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы proxy_hide_header, proxy_pass_header, fastcgi_hide_header | |
| и fastcgi_pass_header. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_hide_header", "proxy_pass_header", "fastcgi_hide_header", | |
| and "fastcgi_pass_header" directives. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| директивы proxy_pass_x_powered_by, fastcgi_x_powered_by и proxy_pass_server | |
| упразднены. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_pass_x_powered_by", "fastcgi_x_powered_by", and "proxy_pass_server" | |
| directives were canceled. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| в режиме прокси поддерживается строка заголовка "X-Accel-Buffering" | |
| в ответе бэкенда. | |
| </para> | |
| <para lang="en"> | |
| the "X-Accel-Buffering" response header line is supported in proxy mode. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибок и утечек памяти при переконфигурации в модуле ngx_http_perl_module. | |
| </para> | |
| <para lang="en"> | |
| the reconfiguration bug and memory leaks in the ngx_http_perl_module. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.45" date="2006-05-06"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы ssl_verify_client, ssl_verify_depth и ssl_client_certificate. | |
| </para> | |
| <para lang="en"> | |
| the "ssl_verify_client", "ssl_verify_depth", and "ssl_client_certificate" | |
| directives. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь переменная $request_method возвращает метод только основного запроса. | |
| </para> | |
| <para lang="en"> | |
| the $request_method variable now returns the main request method. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| в таблице перекодировки koi-win изменены коды символа &deg;. | |
| </para> | |
| <para lang="en"> | |
| the &deg; symbol codes were changed in koi-win conversion table. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| в таблицу перекодировки koi-win добавлены символы евро и номера. | |
| </para> | |
| <para lang="en"> | |
| the euro and N symbols were added to koi-win conversion table. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если nginx распределял запросы на несколько машин, то при падении | |
| одной из них запросы, предназначенные для этой машины, перенаправлялись только | |
| на одну машину вместо того, чтобы равномерно распределяться между остальными. | |
| </para> | |
| <para lang="en"> | |
| if nginx distributed the requests among several backends and some backend | |
| failed, then requests intended for this backend was directed to one live | |
| backend only instead of being distributed among the rest. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.44" date="2006-05-04"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр wait в команде SSI include. | |
| </para> | |
| <para lang="en"> | |
| the "wait" parameter in the "include" SSI command. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| в таблицу перекодировки koi-win добавлены украинские и белорусские символы. | |
| </para> | |
| <para lang="en"> | |
| the Ukrainian and Byelorussian characters were added to koi-win conversion | |
| table. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в SSI. | |
| </para> | |
| <para lang="en"> | |
| in the SSI. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.43" date="2006-04-26"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в SSI. | |
| </para> | |
| <para lang="en"> | |
| in the SSI. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.42" date="2006-04-26"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр bind в директиве listen в IMAP/POP3 прокси. | |
| </para> | |
| <para lang="en"> | |
| the "bind" option of the "listen" directive in IMAP/POP3 proxy. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки при использовании в директиве rewrite одного и того же | |
| выделения более одного раза. | |
| </para> | |
| <para lang="en"> | |
| if the same capture in the "rewrite" directive was used more then once. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в лог не записывались переменные | |
| $sent_http_content_type, $sent_http_content_length, $sent_http_last_modified, | |
| $sent_http_connection, $sent_http_keep_alive и $sent_http_transfer_encoding. | |
| </para> | |
| <para lang="en"> | |
| the $sent_http_content_type, $sent_http_content_length, | |
| $sent_http_last_modified, $sent_http_connection, $sent_http_keep_alive, | |
| and $sent_http_transfer_encoding variables were not written to access log. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| переменная $sent_http_cache_control возвращала содержимое только одной | |
| строки "Cache-Control" в заголовке ответа. | |
| </para> | |
| <para lang="en"> | |
| the $sent_http_cache_control returned value of the single "Cache-Control" | |
| response header line. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.41" date="2006-04-21"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| ключ -v. | |
| </para> | |
| <para lang="en"> | |
| the -v switch. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при включении в SSI удалённых подзапросов | |
| мог произойти segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| the segmentation fault may occurred if the SSI page has remote subrequests. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в обработке FastCGI. | |
| </para> | |
| <para lang="en"> | |
| in FastCGI handling. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если путь к перловым модулям не был указан с помощью | |
| --with-perl_modules_path=PATH или директивы perl_modules, | |
| то на старте происходил segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| if the perl modules path was not set using | |
| --with-perl_modules_path=PATH or the "perl_modules", then | |
| the segmentation fault was occurred. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.40" date="2006-04-19"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_dav_module поддерживает метод MKCOL. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_dav_module supports the MKCOL method. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива create_full_put_path. | |
| </para> | |
| <para lang="en"> | |
| the "create_full_put_path" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $limit_rate. | |
| </para> | |
| <para lang="en"> | |
| the "$limit_rate" variable. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.39" date="2006-04-17"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива uninitialized_variable_warn; уровень логгирования сообщения | |
| о неинициализированной переменной понижен с уровня alert на warn. | |
| </para> | |
| <para lang="en"> | |
| the "uninitialized_variable_warn" directive; the logging level of the | |
| "uninitialized variable" message was lowered from "alert" to "warn". | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива override_charset. | |
| </para> | |
| <para lang="en"> | |
| the "override_charset" directive. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| при использовании неизвестной переменной в SSI-командах echo и if expr='$name' | |
| теперь не записывается в лог сообщение о неизвестной переменной. | |
| </para> | |
| <para lang="en"> | |
| now if the unknown variable is used in the "echo" and "if expr='$name'" | |
| SSI-commands, then the "unknown variable" message is not logged. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| счётчик активных соединений рос при превышении лимита соединений, | |
| заданного директивой worker_connections; | |
| ошибка появилась в 0.2.0. | |
| </para> | |
| <para lang="en"> | |
| the active connection counter increased on the exceeding of the connection | |
| limit specified by the "worker_connections" directive; | |
| the bug had appeared in 0.2.0. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при некоторых условия ограничение скорости соединения могло не работать; | |
| ошибка появилась в 0.3.38. | |
| </para> | |
| <para lang="en"> | |
| the limit rate might not work on some condition; | |
| the bug had appeared in 0.3.38. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.38" date="2006-04-14"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_dav_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_dav_module. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| оптимизация модуля ngx_http_perl_module.<br/> | |
| Спасибо Сергею Скворцову. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_perl_module optimizations.<br/> | |
| Thanks to Sergey Skvortsov. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_perl_module поддерживает метод $r->request_body_file. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_perl_module supports the $r->request_body_file method. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива client_body_in_file_only. | |
| </para> | |
| <para lang="en"> | |
| the "client_body_in_file_only" directive. | |
| </para> | |
| </change> | |
| <change type="workaround"> | |
| <para lang="ru"> | |
| теперь при переполнении диска nginx пытается писать access_log'и только | |
| раз в секунду.<br/> | |
| Спасибо Антону Южанинову и Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| now on disk overflow nginx tries to write access logs once a second only.<br/> | |
| Thanks to Anton Yuzhaninov and Maxim Dounin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| теперь директива limit_rate точнее ограничивает скорость при значениях | |
| больше <nobr>100 Kbyte/s.</nobr><br/> | |
| Спасибо ForJest. | |
| </para> | |
| <para lang="en"> | |
| now the "limit_rate" directive more precisely limits rate if rate is more | |
| than <nobr>100 Kbyte/s.</nobr><br/> | |
| Thanks to ForJest. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| IMAP/POP3 прокси теперь передаёт серверу авторизации символы "\r" и "\n" | |
| в логине и пароле в закодированном виде.<br/> | |
| Спасибо Максиму Дунину. | |
| </para> | |
| <para lang="en"> | |
| now the IMAP/POP3 proxy escapes the "\r" and "\n" symbols in login and | |
| password to pass authorization server.<br/> | |
| Thanks to Maxim Dounin. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.37" date="2006-04-07"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива limit_except. | |
| </para> | |
| <para lang="en"> | |
| the "limit_except" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива if поддерживает операторы "!~", "!~*", "-f" и "!-f". | |
| </para> | |
| <para lang="en"> | |
| the "if" directive supports the "!~", "!~*", "-f", and "!-f" operators. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_perl_module поддерживает метод $r->request_body. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_perl_module supports the $r->request_body method. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в модуле ngx_http_addition_filter_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_addition_filter_module. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.36" date="2006-04-05"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_addition_filter_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_addition_filter_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы proxy_pass и fastcgi_pass можно использовать внутри блока if. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_pass" and "fastcgi_pass" directives may be used inside | |
| the "if" block. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы proxy_ignore_client_abort и fastcgi_ignore_client_abort. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_ignore_client_abort" and "fastcgi_ignore_client_abort" directives. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $request_completion. | |
| </para> | |
| <para lang="en"> | |
| the "$request_completion" variable. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_perl_module поддерживает методы $r->request_method и | |
| $r->remote_addr. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_perl_module supports the $r->request_method and $r->remote_addr. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_ssi_module поддерживает команду elif. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_ssi_module supports the "elif" command. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| строка "\/" в начале выражения команды if модуля ngx_http_ssi_module | |
| воспринималась неверно. | |
| </para> | |
| <para lang="en"> | |
| the "\/" string in the expression of the "if" command of the | |
| ngx_http_ssi_module was treated incorrectly. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в использовании регулярных выражениях в команде if модуля ngx_http_ssi_module. | |
| </para> | |
| <para lang="en"> | |
| in the regular expressions in the "if" command of the ngx_http_ssi_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при задании относительного пути в директивах | |
| client_body_temp_path, proxy_temp_path, fastcgi_temp_path и perl_modules | |
| использовался каталог относительно текущего каталога, а не относительно | |
| префикса сервера. | |
| </para> | |
| <para lang="en"> | |
| if the relative path was specified in the "client_body_temp_path", | |
| "proxy_temp_path", "fastcgi_temp_path", and "perl_modules" directives, | |
| then the directory was used relatively to a current path but not | |
| to a server prefix. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.35" date="2006-03-22"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| accept-фильтр и TCP_DEFER_ACCEPT устанавливались только для первой | |
| директивы listen; | |
| ошибка появилась в 0.3.31. | |
| </para> | |
| <para lang="en"> | |
| the accept-filter and the TCP_DEFER_ACCEPT option were set for first "listen" | |
| directive only; | |
| the bug had appeared in 0.3.31. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве proxy_pass без URI при использовании в подзапросе. | |
| </para> | |
| <para lang="en"> | |
| in the "proxy_pass" directive without the URI part in a subrequest. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.34" date="2006-03-21"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива add_header поддерживает переменные. | |
| </para> | |
| <para lang="en"> | |
| the "add_header" directive supports the variables. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.33" date="2006-03-15"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр http_503 в директивах proxy_next_upstream или fastcgi_next_upstream. | |
| </para> | |
| <para lang="en"> | |
| the "http_503" parameter of the "proxy_next_upstream" or | |
| "fastcgi_next_upstream" directives. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ngx_http_perl_module не работал со встроенным в конфигурационный файл кодом, | |
| если он не начинался сразу же с "sub". | |
| </para> | |
| <para lang="en"> | |
| ngx_http_perl_module did not work with inlined in the configuration code, | |
| if it was not started with the "sub" word. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве post_action. | |
| </para> | |
| <para lang="en"> | |
| in the "post_action" directive. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.32" date="2006-03-11"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| удаление отладочного логгирования на старте и при переконфигурации; | |
| ошибка появилась в 0.3.31. | |
| </para> | |
| <para lang="en"> | |
| the debug logging on startup and reconfiguration time was removed; | |
| the bug had appeared in 0.3.31. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.31" date="2006-03-10"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь nginx передаёт неверные ответы проксированного бэкенда. | |
| </para> | |
| <para lang="en"> | |
| now nginx passes the malformed proxied backend responses. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы listen поддерживают адрес в виде "*:порт". | |
| </para> | |
| <para lang="en"> | |
| the "listen" directives support the address in the "*:port" form. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка EVFILER_TIMER в MacOSX 10.4. | |
| </para> | |
| <para lang="en"> | |
| the EVFILER_TIMER support in MacOSX 10.4. | |
| </para> | |
| </change> | |
| <change type="workaround"> | |
| <para lang="ru"> | |
| обход ошибки обработки миллисекундных таймаутов kqueue в 64-битном ядре | |
| MacOSX.<br/> | |
| Спасибо Андрею Нигматулину. | |
| </para> | |
| <para lang="en"> | |
| for MacOSX 64-bit kernel kqueue millisecond timeout bug.<br/> | |
| Thanks to Andrei Nigmatulin. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если внутри одного сервера описаны несколько директив listen, слушающих на | |
| разных адресах, то имена серверов вида "*.domain.tld" работали только | |
| для первого адреса; | |
| ошибка появилась в 0.3.18. | |
| </para> | |
| <para lang="en"> | |
| if there were several "listen" directives listening one various addresses | |
| inside one server, then server names like "*.domain.tld" worked for first | |
| address only; | |
| the bug had appeared in 0.3.18. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании протокола HTTPS в директиве proxy_pass не передавались | |
| запросы с телом, записанным во временный файл. | |
| </para> | |
| <para lang="en"> | |
| if the HTTPS protocol was used in the "proxy_pass" directive and | |
| the request body was in temporary file then the request was not transferred. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| совместимость с perl 5.8.8. | |
| </para> | |
| <para lang="en"> | |
| perl 5.8.8 compatibility. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.30" date="2006-02-22"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| уровень записи в лог ошибки ECONNABORTED изменён на error с уровня crit. | |
| </para> | |
| <para lang="en"> | |
| the ECONNABORTED error log level was changed to "error" from "crit". | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_perl_module не собирался без модуля ngx_http_ssi_filter_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_perl_module could not be build without | |
| the ngx_http_ssi_filter_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на i386 платформе, если использовался PIC; | |
| ошибка появилась в 0.3.27. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on i386 platform, if the PIC was used; | |
| the bug had appeared in 0.3.27. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.29" date="2006-02-20"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| теперь nginx использует меньше памяти, если PHP в режиме FastCGI передаёт | |
| большое количество предупреждений перед ответом. | |
| </para> | |
| <para lang="en"> | |
| now nginx uses less memory, if PHP in FastCGI mode sends many warnings | |
| before the response. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в ответах 204 для запросов версии HTTP/1.1 выдавалась строка заголовка | |
| "Transfer-Encoding: chunked". | |
| </para> | |
| <para lang="en"> | |
| the "Transfer-Encoding: chunked" header line was issued in the 204 responses | |
| for the HTTP/1.1 requests. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx возвращал 502 код ответа, если FastCGI сервер передавал полные строки | |
| заголовка ответа в отдельных FastCGI записях. | |
| </para> | |
| <para lang="en"> | |
| nginx returned the 502 response, if the complete response header lines | |
| were transferred in a separate FastCGI records. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если в директиве post_action был указан проксируемый URI, то он выполнялся | |
| только после успешного завершения запроса. | |
| </para> | |
| <para lang="en"> | |
| if the proxied URI was specified in the "post_action" directive, then it ran | |
| only after a successful completion of a request. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.28" date="2006-02-16"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива restrict_host_names упразднена. | |
| </para> | |
| <para lang="en"> | |
| the "restrict_host_names" directive was canceled. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр конфигурации --with-cpu-opt=ppc64. | |
| </para> | |
| <para lang="en"> | |
| the --with-cpu-opt=ppc64 configuration parameter. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при некоторых условиях проксированное соединение с клиентом завершалось | |
| преждевременно.<br/> | |
| Спасибо Владимиру Шутову. | |
| </para> | |
| <para lang="en"> | |
| on some condition the proxied connection with a client was terminated | |
| prematurely.<br/> | |
| Thanks to Vladimir Shutoff. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| строка заголовка "X-Accel-Limit-Rate" не учитывалась для запросов, | |
| перенаправленных с помощью строки "X-Accel-Redirect". | |
| </para> | |
| <para lang="en"> | |
| the "X-Accel-Limit-Rate" header line was not taken into account | |
| if the request was redirected using the "X-Accel-Redirect" header line. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива post_action работала только после успешного завершения запроса. | |
| </para> | |
| <para lang="en"> | |
| the "post_action" directive ran only after a successful completion of a request. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| тело проксированного ответа, создаваемого директивой post_action, | |
| передавалось клиенту. | |
| </para> | |
| <para lang="en"> | |
| the proxied response body generated by the "post_action" directive | |
| was transferred to a client. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.27" date="2006-02-08"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| директивы variables_hash_max_size и variables_hash_bucket_size. | |
| </para> | |
| <para lang="en"> | |
| the "variables_hash_max_size" and "variables_hash_bucket_size" directives. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменная $body_bytes_sent доступна не только в директиве log_format. | |
| </para> | |
| <para lang="en"> | |
| the $body_bytes_sent variable can be used not only in the "log_format" | |
| directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменные $ssl_protocol и $ssl_cipher. | |
| </para> | |
| <para lang="en"> | |
| the $ssl_protocol and $ssl_cipher variables. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| определение размера строки кэша распространённых процессоров при старте. | |
| </para> | |
| <para lang="en"> | |
| the cache line size detection for widespread CPUs at start time. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива accept_mutex теперь поддерживается посредством fcntl(2) | |
| на платформах, отличных от i386, amd64, sparc64 и ppc. | |
| </para> | |
| <para lang="en"> | |
| now the "accept_mutex" directive is supported using fcntl(2) | |
| on platforms different from i386, amd64, sparc64, and ppc. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива lock_file и параметр автоконфигурации --with-lock-path=PATH. | |
| </para> | |
| <para lang="en"> | |
| the "lock_file" directive and the --with-lock-path=PATH autoconfiguration | |
| directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании протокола HTTPS в директиве proxy_pass не передавались | |
| запросы с телом. | |
| </para> | |
| <para lang="en"> | |
| if the HTTPS protocol was used in the "proxy_pass" directive then | |
| the requests with the body was not transferred. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.26" date="2006-02-03"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| директива optimize_host_names переименована в optimize_server_names. | |
| </para> | |
| <para lang="en"> | |
| the "optimize_host_names" directive was renamed to the "optimize_server_names". | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при проксировании подзапроса в SSI бэкенду передавался URI основного запроса, | |
| если в директиве proxy_pass отсутствовал URI. | |
| </para> | |
| <para lang="en"> | |
| if in the "proxy_pass" directive was no the URI part, then the main request | |
| URI was transferred to a backend while proxying the SSI subrequest. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.25" date="2006-02-01"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при неверной конфигурации на старте или во время переконфигурации происходил | |
| segmentation fault; | |
| ошибка появилась в 0.3.24. | |
| </para> | |
| <para lang="en"> | |
| the segmentation fault was occurred on start or while reconfiguration | |
| if there was invalid configuration; | |
| the bug had appeared in 0.3.24. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.24" date="2006-02-01"> | |
| <change type="workaround"> | |
| <para lang="ru"> | |
| обход ошибки в kqueue во FreeBSD. | |
| </para> | |
| <para lang="en"> | |
| for bug in FreeBSD kqueue. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ответ, создаваемый директивой post_action, теперь не передаётся клиенту. | |
| </para> | |
| <para lang="en"> | |
| now a response generated by the "post_action" directive is not transferred | |
| to a client. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании большого количества лог-файлов происходила утечка памяти. | |
| </para> | |
| <para lang="en"> | |
| the memory leaks were occurring if many log files were used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| внутри одного location работала только первая директива proxy_redirect. | |
| </para> | |
| <para lang="en"> | |
| the first "proxy_redirect" directive was working inside one location. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| на 64-битных платформах при старте мог произойти segmentation fault, | |
| если использовалось большое количество имён в директивах server_name; | |
| ошибка появилась в 0.3.18. | |
| </para> | |
| <para lang="en"> | |
| on 64-bit platforms segmentation fault may occurred on start | |
| if the many names were used in the "server_name" directives; | |
| the bug had appeared in 0.3.18. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.23" date="2006-01-24"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива optimize_host_names. | |
| </para> | |
| <para lang="en"> | |
| the "optimize_host_names" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки при использовании переменных в директивах path и alias. | |
| </para> | |
| <para lang="en"> | |
| in using of the variables in the "path" and "alias" directives. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_perl_module неправильно собирался на Linux и Solaris. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_perl_module was incorrectly built on Linux and Solaris. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.22" date="2006-01-17"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_perl_module поддерживает методы $r->args и $r->unescape. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_perl_module supports the $r->args and $r->unescape methods. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| метод $r->query_string в модуле ngx_http_perl_module упразднён. | |
| </para> | |
| <para lang="en"> | |
| the method $r->query_string of ngx_http_perl_module was canceled. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если в директиве valid_referers указаны только none или blocked, то | |
| происходил segmentation fault; | |
| ошибка появилась в 0.3.18. | |
| </para> | |
| <para lang="en"> | |
| segmentation fault was occurred if the "none" or "blocked" values was | |
| specified in the "valid_referers" directive; | |
| the bug had appeared in 0.3.18. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.21" date="2006-01-16"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_perl_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_perl_module. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| директива valid_referers разрешает использовать рефереры совсем без URI. | |
| </para> | |
| <para lang="en"> | |
| the "valid_referers" directive allows the referrers without URI part. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.20" date="2006-01-11"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки в обработке SSI. | |
| </para> | |
| <para lang="en"> | |
| in SSI handling. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_memcached_module не поддерживал ключи в виде /uri?args. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_memcached_module did not support the keys in the "/usr?args" form. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.19" date="2005-12-28"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы path и alias поддерживают переменные. | |
| </para> | |
| <para lang="en"> | |
| the "path" and "alias" directives support the variables. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь директива valid_referers опять учитывает URI. | |
| </para> | |
| <para lang="en"> | |
| now the "valid_referers" directive again checks the URI part. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки в обработке SSI. | |
| </para> | |
| <para lang="en"> | |
| in SSI handling. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.18" date="2005-12-26"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива server_names поддерживает имена вида ".domain.tld". | |
| </para> | |
| <para lang="en"> | |
| the "server_names" directive supports the ".domain.tld" names. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива server_names использует хэш для имён вида "*.domain.tld" | |
| и более эффективный хэш для обычных имён. | |
| </para> | |
| <para lang="en"> | |
| the "server_names" directive uses the hash for the "*.domain.tld" names | |
| and more effective hash for usual names. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| директивы server_names_hash_max_size и server_names_hash_bucket_size. | |
| </para> | |
| <para lang="en"> | |
| the "server_names_hash_max_size" and "server_names_hash_bucket_size" directives. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| директивы server_names_hash и server_names_hash_threshold упразднены. | |
| </para> | |
| <para lang="en"> | |
| the "server_names_hash" and "server_names_hash_threshold" directives | |
| were canceled. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива valid_referers использует хэш для имён сайтов. | |
| </para> | |
| <para lang="en"> | |
| the "valid_referers" directive uses the hash site names. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| теперь директива valid_referers проверяет только имена сайтов без учёта URI. | |
| </para> | |
| <para lang="en"> | |
| now the "valid_referers" directive checks the site names only without | |
| the URI part. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| некоторые имена вида ".domain.tld" неверно обрабатывались модулем | |
| ngx_http_map_module. | |
| </para> | |
| <para lang="en"> | |
| some ".domain.tld" names incorrectly processed by the ngx_http_map_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если конфигурационного файла не было, то происходил segmentation fault; | |
| ошибка появилась в 0.3.12. | |
| </para> | |
| <para lang="en"> | |
| segmentation fault was occurred if configuration file did not exist; | |
| the bug had appeared in 0.3.12. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| на 64-битных платформах при старте мог произойти segmentation fault; | |
| ошибка появилась в 0.3.16. | |
| </para> | |
| <para lang="en"> | |
| on 64-bit platforms segmentation fault may occurred on start; | |
| the bug had appeared in 0.3.16. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.17" date="2005-12-18"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| на Linux configure теперь проверяет наличие epoll и sendfile64() в ядре. | |
| </para> | |
| <para lang="en"> | |
| now on Linux configure checks the presence of epoll and sendfile64() in kernel. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива map поддерживает доменные имена в формате ".domain.tld". | |
| </para> | |
| <para lang="en"> | |
| the "map" directive supports domain names in the ".domain.tld" form. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| во время SSL handshake не иcпользовались таймауты; | |
| ошибка появилась в 0.2.4. | |
| </para> | |
| <para lang="en"> | |
| the timeouts were not used in SSL handshake; | |
| the bug had appeared in 0.2.4. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в использовании протокола HTTPS в директиве proxy_pass. | |
| </para> | |
| <para lang="en"> | |
| in the HTTPS protocol in the "proxy_pass" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании протокола HTTPS в директиве proxy_pass по умолчанию | |
| использовался порт 80. | |
| </para> | |
| <para lang="en"> | |
| when the HTTPS protocol was used in the "proxy_pass" directive the port 80 | |
| was used by default. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.16" date="2005-12-16"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_map_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_map_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы types_hash_max_size и types_hash_bucket_size. | |
| </para> | |
| <para lang="en"> | |
| the "types_hash_max_size" and "types_hash_bucket_size" directives. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива ssi_value_length. | |
| </para> | |
| <para lang="en"> | |
| the "ssi_value_length" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива worker_rlimit_core. | |
| </para> | |
| <para lang="en"> | |
| the "worker_rlimit_core" directive. | |
| </para> | |
| </change> | |
| <change type="workaround"> | |
| <para lang="ru"> | |
| при сборке компиляторами icc 8.1 и 9.0 с оптимизацией для | |
| <nobr>Pentium 4</nobr> номер соединения в логах всегда был равен 1. | |
| </para> | |
| <para lang="en"> | |
| the connection number in logs was always 1 if nginx was built by the | |
| icc 8.1 or 9.0 compilers with optimization for <nobr>Pentium 4.</nobr> | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| команда config timefmt в SSI задавала неверный формат времени. | |
| </para> | |
| <para lang="en"> | |
| the "config timefmt" SSI command set incorrect time format. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не закрывал соединения с IMAP/POP3 бэкендом при использовании SSL | |
| соединений; | |
| ошибка появилась в 0.3.13.<br/> | |
| Спасибо Rob Mueller. | |
| </para> | |
| <para lang="en"> | |
| nginx did not close connection to IMAP/POP3 backend for the SSL | |
| connections; | |
| the bug had appeared in 0.3.13.<br/> | |
| Thanks to Rob Mueller. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| segmentation fault мог произойти во время SSL shutdown; | |
| ошибка появилась в 0.3.13. | |
| </para> | |
| <para lang="en"> | |
| segmentation fault may occurred in at SSL shutdown; | |
| the bug had appeared in 0.3.13. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.15" date="2005-12-07"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| новой код 444 в директиве return для закрытия соединения. | |
| </para> | |
| <para lang="en"> | |
| the new 444 code of the "return" directive to close connection. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива so_keepalive в IMAP/POP3 прокси. | |
| </para> | |
| <para lang="en"> | |
| the "so_keepalive" directive in IMAP/POP3 proxy. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx теперь вызывает abort() при обнаружении незакрытых соединений | |
| только при плавном выходе и включённой директиве debug_points. | |
| </para> | |
| <para lang="en"> | |
| if there are unclosed connection nginx now calls abort() only on graceful | |
| quit and active "debug_points" directive. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.14" date="2005-12-05"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в ответе 304 передавалось тело ответа; | |
| ошибка появилась в 0.3.13. | |
| </para> | |
| <para lang="en"> | |
| in the 304 response the body was transferred; | |
| the bug had appeared in 0.3.13. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.13" date="2005-12-05"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| IMAP/POP3 прокси поддерживает STARTTLS и STLS. | |
| </para> | |
| <para lang="en"> | |
| the IMAP/POP3 proxy supports STARTTLS and STLS. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| IMAP/POP3 прокси не работала с методами select, poll и /dev/poll. | |
| </para> | |
| <para lang="en"> | |
| the IMAP/POP3 proxy did not work with the select, poll, and /dev/poll methods. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки в обработке SSI. | |
| </para> | |
| <para lang="en"> | |
| in SSI handling. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| sendfilev() в Solaris теперь не используется при передаче тела запроса | |
| FastCGI-серверу через unix domain сокет. | |
| </para> | |
| <para lang="en"> | |
| now Solaris sendfilev() is not used to transfer the client request body | |
| to FastCGI-server via the unix domain socket. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива auth_basic не запрещала аутентификацию; | |
| ошибка появилась в 0.3.11. | |
| </para> | |
| <para lang="en"> | |
| the "auth_basic" directive did not disable the authorization; | |
| the bug had appeared in 0.3.11. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.12" date="2005-11-26"> | |
| <change type="security"> | |
| <para lang="ru"> | |
| если nginx был собран с модулем ngx_http_realip_module, то при использовании | |
| директивы "satisfy_any on" директивы доступа и аутентификации не работали. | |
| Модуль ngx_http_realip_module не собирался и не собирается по умолчанию. | |
| </para> | |
| <para lang="en"> | |
| if nginx was built with the ngx_http_realip_module and the "satisfy_any on" | |
| directive was used, then access and authorization directives did not work. | |
| The ngx_http_realip_module was not built and is not built by default. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| имя переменной "$time_gmt" изменено на "$time_local". | |
| </para> | |
| <para lang="en"> | |
| the "$time_gmt" variable name was changed to "$time_local". | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| директивы proxy_header_buffer_size и fastcgi_header_buffer_size | |
| переименованы соответственно в proxy_buffer_size и fastcgi_buffer_size. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_header_buffer_size" and "fastcgi_header_buffer_size" directives | |
| was renamed to the "proxy_buffer_size" and "fastcgi_buffer_size" directives. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_memcached_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_memcached_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива proxy_buffering. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_buffering" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| изменение в работе с accept mutex при использовании метода rtsig; | |
| ошибка появилась в 0.3.0. | |
| </para> | |
| <para lang="en"> | |
| the changes in accept mutex handling when the "rtsig" method was used; | |
| the bug had appeared in 0.3.0. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если клиент передал строку "Transfer-Encoding: chunked" в заголовке | |
| запроса, то nginx теперь выдаёт ошибку 411. | |
| </para> | |
| <para lang="en"> | |
| if the client sent the "Transfer-Encoding: chunked" header line, then | |
| nginx returns the 411 error. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при наследовании директивы auth_basic с уровня http в строке | |
| "WWW-Authenticate" заголовка ответа выводился realm без текста "Basic realm". | |
| </para> | |
| <para lang="en"> | |
| if the "auth_basic" directive was inherited from the http level, | |
| then the realm in the "WWW-Authenticate" header line was without | |
| the "Basic realm" text. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если в директиве access_log был явно указан формат combined, то в лог | |
| записывались пустые строки; | |
| ошибка появилась в 0.3.8. | |
| </para> | |
| <para lang="en"> | |
| if the "combined" format was explicitly specified in the "access_log" directive, | |
| then the empty lines was written to the log; | |
| the bug had appeared in 0.3.8. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не работал на платформе sparc под любыми OS, кроме Solaris. | |
| </para> | |
| <para lang="en"> | |
| nginx did not run on the sparc platform under any OS except Solaris. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве if теперь не нужно разделять пробелом строку в кавычках и | |
| закрывающую скобку. | |
| </para> | |
| <para lang="en"> | |
| now it is not necessary to place space between the quoted string and closing | |
| bracket in the "if" directive. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.11" date="2005-11-15"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не передавал при проксировании тело запроса и строки заголовка клиента; | |
| ошибка появилась в 0.3.10. | |
| </para> | |
| <para lang="en"> | |
| nginx did not pass the client request headers and body while proxying; | |
| the bug had appeared in 0.3.10. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.10" date="2005-11-15"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| директива valid_referers и переменная $invalid_referer перенесены | |
| из модуля ngx_http_rewrite_module в новый модуль ngx_http_referer_module. | |
| </para> | |
| <para lang="en"> | |
| the "valid_referers" directive and the "$invalid_referer" variable | |
| were moved to the new ngx_http_referer_module from the ngx_http_rewrite_module. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| имя переменной "$apache_bytes_sent" изменено на "$body_bytes_sent". | |
| </para> | |
| <para lang="en"> | |
| the "$apache_bytes_sent" variable name was changed to "$body_bytes_sent". | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменные "$sent_http_...". | |
| </para> | |
| <para lang="en"> | |
| the "$sent_http_..." variables. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива if поддерживает операции "=" и "!=". | |
| </para> | |
| <para lang="en"> | |
| the "if" directive supports the "=" and "!=" operations. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива proxy_pass поддерживает протокол HTTPS. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_pass" directive supports the HTTPS protocol. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива proxy_set_body. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_set_body" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива post_action. | |
| </para> | |
| <para lang="en"> | |
| the "post_action" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_empty_gif_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_empty_gif_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива worker_cpu_affinity для Linux. | |
| </para> | |
| <para lang="en"> | |
| the "worker_cpu_affinity" directive for Linux. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива rewrite не раскодировала символы в редиректах в URI, | |
| теперь символы раскодируются, кроме символов %00-%25 и %7F-%FF. | |
| </para> | |
| <para lang="en"> | |
| the "rewrite" directive did not unescape URI part in redirect, | |
| now it is unescaped except the %00-%25 and %7F-%FF characters. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался компилятором icc 9.0. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built by the icc 9.0 compiler. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если для статического файла нулевого размера был разрешён SSI, | |
| то ответ передавался неверно при кодировании chunk'ами. | |
| </para> | |
| <para lang="en"> | |
| if the SSI was enabled for zero size static file, then the chunked | |
| response was encoded incorrectly. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.9" date="2005-11-10"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx считал небезопасными URI, в которых между двумя слэшами | |
| находилось два любых символа; | |
| ошибка появилась в 0.3.8. | |
| </para> | |
| <para lang="en"> | |
| nginx considered URI as unsafe if two any symbols was between two slashes; | |
| the bug had appeared in 0.3.8. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.8" date="2005-11-09"> | |
| <change type="security"> | |
| <para lang="ru"> | |
| nginx теперь проверят URI, полученные от бэкенда в строке "X-Accel-Redirect" | |
| в заголовке ответа, или в SSI файле на наличие путей "/../" и нулей. | |
| </para> | |
| <para lang="en"> | |
| nginx now checks URI got from a backend in "X-Accel-Redirect" header line | |
| or in SSI file for the "/../" paths and zeroes. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| nginx теперь не воспринимает пустое имя как правильное | |
| в строке "Authorization" в заголовке запроса. | |
| </para> | |
| <para lang="en"> | |
| nginx now does not treat the empty user name in the "Authorization" header | |
| line as valid one. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива ssl_session_timeout модулей | |
| ngx_http_ssl_module и ngx_imap_ssl_module. | |
| </para> | |
| <para lang="en"> | |
| the "ssl_session_timeout" directives | |
| of the ngx_http_ssl_module and ngx_imap_ssl_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива auth_http_header модуля ngx_imap_auth_http_module. | |
| </para> | |
| <para lang="en"> | |
| the "auth_http_header" directive of the ngx_imap_auth_http_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива add_header. | |
| </para> | |
| <para lang="en"> | |
| the "add_header" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_realip_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_realip_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| новые переменные для использования в директиве log_format: | |
| $bytes_sent, $apache_bytes_sent, $status, $time_gmt, | |
| $uri, $request_time, $request_length, | |
| $upstream_status, $upstream_response_time, | |
| $gzip_ratio, | |
| $uid_got, $uid_set, | |
| $connection, $pipe и $msec. | |
| Параметры в виде "%name" скоро будут упразднены. | |
| </para> | |
| <para lang="en"> | |
| the new variables to use in the "log_format" directive: | |
| $bytes_sent, $apache_bytes_sent, $status, $time_gmt, | |
| $uri, $request_time, $request_length, | |
| $upstream_status, $upstream_response_time, | |
| $gzip_ratio, | |
| $uid_got, $uid_set, | |
| $connection, $pipe, and $msec. | |
| The parameters in the "%name" form will be canceled soon. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| в директиве "if" ложными значениями переменных теперь являются | |
| пустая строка "" и строки, начинающиеся на "0". | |
| </para> | |
| <para lang="en"> | |
| now the false variable values in the "if" directive are the empty string "" | |
| and string starting with "0". | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при работает с проксированными или FastCGI-серверами nginx мог оставлять | |
| открытыми соединения и временные файлы с запросами клиентов. | |
| </para> | |
| <para lang="en"> | |
| while using proxied or FastCGI-server nginx may leave connections | |
| and temporary files with client requests in open state. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| рабочие процессы не сбрасывали буферизированные логи при плавном выходе. | |
| </para> | |
| <para lang="en"> | |
| the worker processes did not flush the buffered logs on graceful exit. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если URI запроса изменялось с помощью rewrite, а затем запрос проксировался | |
| в location, заданном регулярным выражением, то бэкенду передавался | |
| неверный запрос; | |
| ошибка появилась в 0.2.6. | |
| </para> | |
| <para lang="en"> | |
| if the request URI was changes by the "rewrite" directive and the request | |
| was proxied in location given by regular expression, then the incorrect | |
| request was transferred to backend; | |
| the bug had appeared in 0.2.6. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива expires не удаляла уже установленную строку заголовка "Expires". | |
| </para> | |
| <para lang="en"> | |
| the "expires" directive did not remove the previous "Expires" header. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании метода rtsig и нескольких рабочих процессах nginx | |
| мог перестать принимать запросы. | |
| </para> | |
| <para lang="en"> | |
| nginx may stop to accept requests if the "rtsig" method and several worker | |
| processes were used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в SSI командах неверно обрабатывались строки "\"" и "\'". | |
| </para> | |
| <para lang="en"> | |
| the "\"" and "\'" escape symbols were incorrectly handled in SSI commands. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если ответ заканчивался сразу же после SSI команды, то при использовании | |
| сжатия ответ передавался не до конца или не передавался вообще. | |
| </para> | |
| <para lang="en"> | |
| if the response was ended just after the SSI command and gzipping was used, | |
| then the response did not transferred complete or did not transferred at all. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.7" date="2005-10-27"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива access_log поддерживает параметр buffer=. | |
| </para> | |
| <para lang="en"> | |
| the "access_log" supports the "buffer=" parameter. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на платформах, отличных от i386, amd64, sparc и ppc; | |
| ошибка появилась в 0.3.2. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on platforms different from i386, amd64, sparc, | |
| and ppc; | |
| the bug had appeared in 0.3.2. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.6" date="2005-10-24"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| IMAP/POP3 прокси теперь не передаёт серверу авторизации пустой логин. | |
| </para> | |
| <para lang="en"> | |
| now the IMAP/POP3 proxy do not send the empty login to authorization server. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива log_format поддерживает переменные в виде $name. | |
| </para> | |
| <para lang="en"> | |
| the "log_format" supports the variables in the $name form. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если хотя бы в одном сервере не было описано ни одной директивы listen, то | |
| nginx не слушал на 80 порту; | |
| ошибка появилась в 0.3.3. | |
| </para> | |
| <para lang="en"> | |
| if at least in one server was no the "listen" directive, then nginx did not | |
| listen on the 80 port; | |
| the bug had appeared in 0.3.3. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если в директиве proxy_pass отсутствовал URI, то всегда использовался порт 80. | |
| </para> | |
| <para lang="en"> | |
| if the URI part is omitted in "proxy_pass" directive, the 80 port was | |
| always used. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.5" date="2005-10-21"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если логин IMAP/POP3 менялся сервером авторизации, то мог произойти | |
| segmentation fault; | |
| ошибка появилась в 0.2.2. | |
| </para> | |
| <para lang="en"> | |
| the segmentation fault may occurred if the IMAP/POP3 login was changed | |
| by authorization server; | |
| the bug had appeared in 0.2.2. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| accept mutex не работал, все соединения обрабатывались одним рабочим процессом; | |
| ошибка появилась в 0.3.3. | |
| </para> | |
| <para lang="en"> | |
| the accept mutex did not work and all connections were handled by one process; | |
| the bug had appeared in 0.3.3. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании метода rtsig и директивы timer_resolution | |
| не работали таймауты. | |
| </para> | |
| <para lang="en"> | |
| the timeout did not work if the "rtsig" method and the "timer_resolution" | |
| directive were used. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.4" date="2005-10-19"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на Linux 2.4+ и MacOS X; | |
| ошибка появилась в 0.3.3. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on Linux 2.4+ and MacOS X; | |
| the bug had appeared in 0.3.3. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.3" date="2005-10-19"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| параметры "bl" и "af" директивы listen переименованы в "backlog" | |
| и "accept_filter". | |
| </para> | |
| <para lang="en"> | |
| the "bl" and "af" parameters of the "listen" directive was renamed to | |
| the "backlog" and "accept_filter". | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметры "rcvbuf" и "sndbuf" в директиве listen. | |
| </para> | |
| <para lang="en"> | |
| the "rcvbuf" and "sndbuf" parameters of the "listen" directive. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| параметр лога $msec теперь не требует дополнительного системного | |
| вызова gettimeofday(). | |
| </para> | |
| <para lang="en"> | |
| the "$msec" log parameter does not require now the additional | |
| the gettimeofday() system call. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| ключ -t теперь проверяет директивы listen. | |
| </para> | |
| <para lang="en"> | |
| the -t switch now tests the "listen" directives. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если в директиве listen был указан неверный адрес, то nginx после | |
| сигнала -HUP оставлял открытый сокет в состоянии CLOSED. | |
| </para> | |
| <para lang="en"> | |
| if the invalid address was specified in the "listen" directive, then | |
| after the -HUP signal nginx left an open socket in the CLOSED state. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| для индексных файлов, содержащих в имени переменную, мог неверно выставляться | |
| тип mime по умолчанию; | |
| ошибка появилась в 0.3.0. | |
| </para> | |
| <para lang="en"> | |
| the mime type may be incorrectly set to default value for index file with | |
| variable in the name; | |
| the bug had appeared in 0.3.0. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива timer_resolution. | |
| </para> | |
| <para lang="en"> | |
| the "timer_resolution" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр лога $upstream_response_time в миллисекундах. | |
| </para> | |
| <para lang="en"> | |
| the millisecond "$upstream_response_time" log parameter. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| временный файл с телом запроса клиента теперь удаляется сразу после того, | |
| как клиенту передан заголовок ответа. | |
| </para> | |
| <para lang="en"> | |
| a temporary file with client request body now is removed just after | |
| the response header was transferred to a client. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| совместимость с OpenSSL 0.9.6. | |
| </para> | |
| <para lang="en"> | |
| OpenSSL 0.9.6 compatibility. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| пути к файлам с SSL сертификатом и ключом не могли быть относительными. | |
| </para> | |
| <para lang="en"> | |
| the SSL certificate and key file paths could not be relative. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива ssl_prefer_server_ciphers не работала для модуля ngx_imap_ssl_module. | |
| </para> | |
| <para lang="en"> | |
| the "ssl_prefer_server_ciphers" directive did not work in | |
| the ngx_imap_ssl_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива ssl_protocols позволяла задать только один протокол. | |
| </para> | |
| <para lang="en"> | |
| the "ssl_protocols" directive allowed to specify the single protocol only. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.2" date="2005-10-12"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка Sun Studio 10 C compiler. | |
| </para> | |
| <para lang="en"> | |
| the Sun Studio 10 C compiler support. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы proxy_upstream_max_fails, proxy_upstream_fail_timeout, | |
| fastcgi_upstream_max_fails и fastcgi_upstream_fail_timeout. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_upstream_max_fails", "proxy_upstream_fail_timeout", | |
| "fastcgi_upstream_max_fails", and "fastcgi_upstream_fail_timeout" | |
| directives. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.1" date="2005-10-10"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| во время переполнения очереди сигналов при использовании метода rtsig | |
| происходил segmentation fault; | |
| ошибка появилась в 0.2.0. | |
| </para> | |
| <para lang="en"> | |
| the segmentation fault occurred when the signal queue overflowed | |
| if the "rtsig" method was used; | |
| the bug had appeared in 0.2.0. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| корректная обработка пар "\\", "\"", "\'" и "\$" в SSI. | |
| </para> | |
| <para lang="en"> | |
| correct handling of the "\\", "\"", "\'", and "\$" pairs in SSI. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.3.0" date="2005-10-07"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| убрано десятидневное ограничение времени работы рабочего процесса. | |
| Ограничение было введено из-за переполнения миллисекундных таймеров. | |
| </para> | |
| <para lang="en"> | |
| the 10-days live time limit of worker process was eliminated. | |
| The limit was introduced because of millisecond timers overflow. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.2.6" date="2005-10-05"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| с 60 до 10 секунд уменьшено время повторного обращения к бэкенду | |
| при использовании распределения нагрузки. | |
| </para> | |
| <para lang="en"> | |
| while using load-balancing the time before the failed backend retry | |
| was decreased from 60 to 10 seconds. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| директива proxy_pass_unparsed_uri упразднена, оригинальный запрос теперь | |
| передаётся, если в директиве proxy_pass отсутствует URI. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_pass_unparsed_uri" was canceled, the original URI now passed, | |
| if the URI part is omitted in "proxy_pass" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива error_page поддерживает редиректы и позволяет более гибко | |
| менять код ошибки. | |
| </para> | |
| <para lang="en"> | |
| the "error_page" directive supports redirects and allows more flexible | |
| to change an error code. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| в проксированных подзапросах теперь игнорируется переданный charset. | |
| </para> | |
| <para lang="en"> | |
| the charset in the "Content-Type" header line now is ignored | |
| in proxied subrequests. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если после изменения URI в блоке if для запроса не находилась | |
| новая конфигурация, то правила модуля ngx_http_rewrite_module выполнялись | |
| снова. | |
| </para> | |
| <para lang="en"> | |
| if the URI was changed in the "if" block and request did not found | |
| new configuration, then the ngx_http_rewrite_module rules ran again. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если директива set устанавливала переменную модуля ngx_http_geo_module | |
| в какой-либо части конфигурации, то эта переменная не была доступна в | |
| других частях конфигурации и выдавалась ошибка "using uninitialized variable"; | |
| ошибка появилась в 0.2.2. | |
| </para> | |
| <para lang="en"> | |
| if the "set" directive set the ngx_http_geo_module variable in some | |
| configuration part, the this variable was not available in other | |
| configuration parts and the "using uninitialized variable" error was occurred; | |
| the bug had appeared in 0.2.2. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.2.5" date="2005-10-04"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| дублирующее значение переменной модуля ngx_http_geo_module теперь | |
| выдаёт предупреждение и изменяет старое значение. | |
| </para> | |
| <para lang="en"> | |
| the duplicate value of the ngx_http_geo_module variable now causes | |
| the warning and changes old value. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_ssi_module поддерживает команду set. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_ssi_module supports the "set" command. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_ssi_module поддерживает параметр file в команде include. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_ssi_module supports the "file" parameter in the "include" command. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_ssi_module поддерживает подстановку значений переменных | |
| в выражениях команды if. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_ssi_module supports the variable value substitutions in | |
| expressions of the "if" command. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.2.4" date="2005-10-03"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_ssi_module поддерживает выражения | |
| "$var=text", "$var!=text", "$var=/text/" и "$var!=/text/" | |
| в команде if. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_ssi_module supports | |
| "$var=text", "$var!=text", "$var=/text/", and "$var!=/text/" expressions | |
| in the "if" command. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки при проксировании location без слэша в конце; | |
| ошибка появилась в 0.1.44. | |
| </para> | |
| <para lang="en"> | |
| in proxying location without trailing slash; | |
| the bug had appeared in 0.1.44. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании метода rtsig мог произойти segmentation fault; | |
| ошибка появилась в 0.2.0. | |
| </para> | |
| <para lang="en"> | |
| the segmentation fault may occurred if the "rtsig" method was used; | |
| the bug had appeared in 0.2.0. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.2.3" date="2005-09-30"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался без параметра --with-debug; | |
| ошибка появилась в 0.2.2. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built without the --with-debug option; | |
| the bug had appeared in 0.2.2. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.2.2" date="2005-09-30"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| команда config errmsg в модуле ngx_http_ssi_module. | |
| </para> | |
| <para lang="en"> | |
| the "config errmsg" command of the ngx_http_ssi_module. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| переменные модуля ngx_http_geo_module можно переопределять директивой set. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_geo_module variables can be overridden by the "set" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы ssl_protocols и ssl_prefer_server_ciphers модулей | |
| ngx_http_ssl_module и ngx_imap_ssl_module. | |
| </para> | |
| <para lang="en"> | |
| the "ssl_protocols" and "ssl_prefer_server_ciphers" directives | |
| of the ngx_http_ssl_module and ngx_imap_ssl_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибка в модуле ngx_http_autoindex_module при показе длинных имён файлов; | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_autoindex_module did not show correctly the long file names; | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_autoindex_module теперь не показывает файлы, | |
| начинающиеся на точку. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_autoindex_module now do not show the files starting by dot. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если SSL handshake завершался с ошибкой, то это могло привести также | |
| к закрытию другого соединения.<br/> | |
| Спасибо Rob Mueller. | |
| </para> | |
| <para lang="en"> | |
| if the SSL handshake failed then another connection may be closed too.<br/> | |
| Thanks to Rob Mueller. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| экспортные версии MSIE 5.x не могли соединиться по HTTPS. | |
| </para> | |
| <para lang="en"> | |
| the export versions of MSIE 5.x could not connect via HTTPS. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.2.1" date="2005-09-23"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если все бэкенды, используемые для балансировки нагрузки, оказывались | |
| в нерабочем состоянии после одной ошибки, то nginx мог зациклится; | |
| ошибка появилась в 0.2.0. | |
| </para> | |
| <para lang="en"> | |
| if all backend using in load-balancing failed after one error, then | |
| nginx may got caught in an endless loop; | |
| the bug had appeared in 0.2.0. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.2.0" date="2005-09-23"> | |
| <change> | |
| <para lang="ru"> | |
| Изменились имена pid-файлов, используемые во время обновления исполняемого | |
| файла. Ручное переименование теперь не нужно. | |
| Старый основной процесс добавляет к своему pid-файл суффикс ".oldbin" | |
| и запускает новый исполняемый файл. | |
| Новый основной процесс создаёт обычный pid-файл без суффикса ".newbin". | |
| Если новый основной процесс выходит, то старый процесс переименовывает свой | |
| pid-файл c суффиксом ".oldbin" в pid-файл без суффикса. | |
| При обновлении с версии 0.1.х до 0.2.0 нужно учитывать, что оба | |
| процесса—старый 0.1.x и новый 0.2.0—используют pid-файл | |
| без суффиксов. | |
| </para> | |
| <para lang="en"> | |
| The pid-file names used during online upgrade was changed and now is not | |
| required a manual rename operation. | |
| The old master process adds the ".oldbin" suffix to its pid-file and | |
| executes a new binary file. | |
| The new master process creates usual pid-file without the ".newbin" suffix. | |
| If the master process exits, then old master process renames back | |
| its pid-file with the ".oldbin" suffix to the pid-file without suffix. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| директива worker_connections, новое название директивы connections; | |
| директива теперь задаёт максимальное число соединений, | |
| а не максимально возможный номер дескриптора для сокета. | |
| </para> | |
| <para lang="en"> | |
| the "worker_connections" directive, new name of the "connections" directive; | |
| now the directive specifies maximum number of connections, | |
| but not maximum socket descriptor number. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| SSL поддерживает кэширование сессий в пределах одного рабочего процесса. | |
| </para> | |
| <para lang="en"> | |
| SSL supports the session cache inside one worker process. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива satisfy_any. | |
| </para> | |
| <para lang="en"> | |
| the "satisfy_any" directive. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| модули ngx_http_access_module и ngx_http_auth_basic_module не работают | |
| для подзапросов. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_access_module and ngx_http_auth_basic_module do not run | |
| for subrequests. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы worker_rlimit_nofile и worker_rlimit_sigpending. | |
| </para> | |
| <para lang="en"> | |
| the "worker_rlimit_nofile" and "worker_rlimit_sigpending" directives. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если все бэкенды, используемые для балансировки нагрузки, оказывались | |
| в нерабочем состоянии после одной ошибки, то nginx не обращался к ним | |
| в течение 60 секунд. | |
| </para> | |
| <para lang="en"> | |
| if all backend using in load-balancing failed after one error, then | |
| nginx did not try do connect to them during 60 seconds. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в парсинге аргументов IMAP/POP3 команд.<br/> | |
| Спасибо Rob Mueller. | |
| </para> | |
| <para lang="en"> | |
| in IMAP/POP3 command argument parsing.<br/> | |
| Thanks to Rob Mueller. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки при использовании SSL в IMAP/POP3 прокси. | |
| </para> | |
| <para lang="en"> | |
| errors while using SSL in IMAP/POP3 proxy. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки при использовании SSI и сжатия. | |
| </para> | |
| <para lang="en"> | |
| errors while using SSI and gzipping. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в ответах 304 не добавлялись строки заголовка ответа "Expires" и | |
| "Cache-Control".<br/> | |
| Спасибо Александру Кукушкину. | |
| </para> | |
| <para lang="en"> | |
| the "Expires" and "Cache-Control" header lines were omitted | |
| from the 304 responses.<br/> | |
| Thanks to Alexandr Kukushkin. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.45" date="2005-09-08"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| директива ssl_engine упразднена в модуле ngx_http_ssl_module и | |
| перенесена на глобальный уровень. | |
| </para> | |
| <para lang="en"> | |
| the "ssl_engine" directive was canceled in the ngx_http_ssl_module | |
| and now is introduced at global level. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ответы с подзапросами, включённые с помощью SSI, не передавались | |
| через SSL соединение. | |
| </para> | |
| <para lang="en"> | |
| the responses with SSI subrequests did not transferred via SSL connection. | |
| </para> | |
| </change> | |
| <change> | |
| <para lang="ru"> | |
| Разные исправления в IMAP/POP3 прокси. | |
| </para> | |
| <para lang="en"> | |
| Various bug fixes in the IMAP/POP3 proxy. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.44" date="2005-09-06"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| IMAP/POP3 прокси поддерживает SSL. | |
| </para> | |
| <para lang="en"> | |
| the IMAP/POP3 proxy supports SSL. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива proxy_timeout модуля ngx_imap_proxy_module. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_timeout" directive of the ngx_imap_proxy_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива userid_mark. | |
| </para> | |
| <para lang="en"> | |
| the "userid_mark" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| значение переменной $remote_user определяется независимо от того, | |
| используется ли авторизация или нет. | |
| </para> | |
| <para lang="en"> | |
| the $remote_user variable value is determined independently of | |
| authorization use. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.43" date="2005-08-30"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| listen(2) backlog в директиве listen можно менять по сигналу -HUP. | |
| </para> | |
| <para lang="en"> | |
| the listen(2) backlog in the "listen" directive | |
| can be changed using the -HUP signal. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| скрипт geo2nginx.pl добавлен в contrib. | |
| </para> | |
| <para lang="en"> | |
| the geo2nginx.pl script was added to contrib. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| параметры FastCGI с пустым значениями теперь передаются серверу. | |
| </para> | |
| <para lang="en"> | |
| the FastCGI parameters with the empty values now are passed to a server. | |
| </para> | |
| </change> | |
| <!-- | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при ошибках в работе с проксированным сервером или FastCGI сервером | |
| мог произойти segmentation fault; | |
| в режиме прокси ошибка появилась в 0.1.29. | |
| </para> | |
| <para lang="en"> | |
| the segmentation fault may occurred if there were errors while | |
| working with proxied or FastCGI server; | |
| in the proxied mode the bug had appeared in 0.1.29. | |
| </para> | |
| </change> | |
| --> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если в ответе проксированного сервера или FastCGI сервера была строка | |
| "Cache-Control", то при использовании директивы expires происходил | |
| segmentation fault или рабочий процесс мог зациклится; | |
| в режиме прокси ошибка появилась в 0.1.29. | |
| </para> | |
| <para lang="en"> | |
| the segmentation fault occurred or the worker process may got caught | |
| in an endless loop if the proxied or FastCGI server sent the "Cache-Control" | |
| header line and the "expires" directive was used; | |
| in the proxied mode the bug had appeared in 0.1.29. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.42" date="2005-08-23"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если URI запроса получался нулевой длины после обработки модулем | |
| ngx_http_rewrite_module, то в модуле ngx_http_proxy_module происходил | |
| segmentation fault или bus error. | |
| </para> | |
| <para lang="en"> | |
| if the request URI had a zero length after the processing in | |
| the ngx_http_proxy_module, then the segmentation fault or bus error occurred | |
| in the ngx_http_proxy_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива limit_rate не работала внутри блока if; | |
| ошибка появилась в 0.1.38. | |
| </para> | |
| <para lang="en"> | |
| the "limit_rate" directive did not work inside the "if" block; | |
| the bug had appeared in 0.1.38. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.41" date="2005-07-25"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если переменная использовалась в файле конфигурации, | |
| то она не могла использоваться в SSI. | |
| </para> | |
| <para lang="en"> | |
| if the variable was used in the configuration file, | |
| then it can not be used in SSI. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.40" date="2005-07-22"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если клиент слал очень длинную строку заголовка, то в логе не помещалась | |
| информация, связанная с этим запросом. | |
| </para> | |
| <para lang="en"> | |
| if a client sent too long header line, then the request information | |
| did not logged in the error log. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании "X-Accel-Redirect" не передавалась строка "Set-Cookie"; | |
| ошибка появилась в 0.1.39. | |
| </para> | |
| <para lang="en"> | |
| the "Set-Cookie" header line was not transferred when the "X-Accel-Redirect" | |
| was used; | |
| the bug had appeared in 0.1.39. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании "X-Accel-Redirect" не передавалась строка | |
| "Content-Disposition". | |
| </para> | |
| <para lang="en"> | |
| the "Content-Disposition" header line was not transferred when | |
| the "X-Accel-Redirect" was used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| по сигналу SIGQUIT основной процесс не закрывал сокеты, на которых он слушал. | |
| </para> | |
| <para lang="en"> | |
| the master process did not close the listen socket on the SIGQUIT signal. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| после обновления исполняемого файла на лету на Linux и Solaris | |
| название процесса в команде ps становилось короче. | |
| </para> | |
| <para lang="en"> | |
| after on-line upgrade on Linux and Solaris the process name | |
| became shorter in the "ps" command. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.39" date="2005-07-14"> | |
| <change> | |
| <para lang="ru"> | |
| Изменения в модуле ngx_http_charset_module: | |
| директива default_charset упразднена; | |
| директива charset задаёт кодировку ответа; | |
| директива source_charset задаёт только исходную кодировку. | |
| </para> | |
| <para lang="en"> | |
| The changes in the ngx_http_charset_module: | |
| the "default_charset" directive was canceled; | |
| the "charset" directive sets the response charset; | |
| the "source_charset" directive sets the source charset only. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при перенаправлении ошибки 401, полученной от бэкенда, не передавалась | |
| строка заголовка "WWW-Authenticate". | |
| </para> | |
| <para lang="en"> | |
| the backend "WWW-Authenticate" header line did not transferred while | |
| the 401 response code redirecting. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модули ngx_http_proxy_module и ngx_http_fastcgi_module могли закрыть | |
| соединение до того, как что-нибудь было передано клиенту; | |
| ошибка появилась в 0.1.38. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_proxy_module and ngx_http_fastcgi_module may close | |
| a connection before anything was transferred to a client; | |
| the bug had appeared in 0.1.38. | |
| </para> | |
| </change> | |
| <change type="workaround"> | |
| <para lang="ru"> | |
| обработка ошибки инициализации в crypt_r() в Linux glibc. | |
| </para> | |
| <para lang="en"> | |
| the Linux glibc crypt_r() initialization bug. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_ssi_module не поддерживал относительные URI в | |
| команде include virtual. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_ssi_module did not support the relative URI in | |
| the "include virtual" command. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если в строке заголовка ответа бэкенда была строка "Location", | |
| которую nginx не должен был изменять, то в ответе передавалось тело 500 ошибки; | |
| ошибка появилась в 0.1.29. | |
| </para> | |
| <para lang="en"> | |
| if the backend response had the "Location" header line and nginx | |
| should not rewrite this line, then the 500 code response body was transferred; | |
| the bug had appeared in 0.1.29. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| некоторые директивы модулей ngx_http_proxy_module и ngx_http_fastcgi_module | |
| не наследовались с уровня server на уровень location; | |
| ошибка появилась в 0.1.29. | |
| </para> | |
| <para lang="en"> | |
| some directives of the ngx_http_proxy_module and ngx_http_fastcgi_module | |
| were not inherited from the server to the location level; | |
| the bug had appeared in 0.1.29. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_ssl_module не поддерживал цепочки сертификатов. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_ssl_module did not support the certificate chain. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибка в модуле ngx_http_autoindex_module при показе длинных имён файлов; | |
| ошибка появилась в 0.1.38. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_autoindex_module did not show correctly the long file names; | |
| the bug had appeared in 0.1.38. | |
| </para> | |
| </change> | |
| <change> | |
| <para lang="ru"> | |
| Исправления в IMAP/POP3 прокси при взаимодействии с бэкендом на стадии login. | |
| </para> | |
| <para lang="en"> | |
| Bugfixes in IMAP/POP3 proxy in interaction with a backend at the login state. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.38" date="2005-07-08"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива limit_rate поддерживается в режиме прокси и FastCGI. | |
| </para> | |
| <para lang="en"> | |
| the "limit_rate" directive is supported in proxy and FastCGI mode. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| в режиме прокси и FastCGI поддерживается строка заголовка "X-Accel-Limit-Rate" | |
| в ответе бэкенда. | |
| </para> | |
| <para lang="en"> | |
| the "X-Accel-Limit-Rate" response header line is supported in proxy | |
| and FastCGI mode. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива break. | |
| </para> | |
| <para lang="en"> | |
| the "break" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива log_not_found. | |
| </para> | |
| <para lang="en"> | |
| the "log_not_found" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при перенаправлении запроса с помощью строки заголовка "X-Accel-Redirect" | |
| не изменялся код ответа. | |
| </para> | |
| <para lang="en"> | |
| the response status code was not changed when request was redirected | |
| by the ""X-Accel-Redirect" header line. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| переменные, установленные директивой set не могли использоваться в SSI. | |
| </para> | |
| <para lang="en"> | |
| the variables set by the "set" directive could not be used in SSI. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при включении в SSI более одного удалённого подзапроса | |
| мог произойти segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| the segmentation fault may occurred if the SSI page has more than one | |
| remote subrequest. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если статусная строка в ответе бэкенда передавалась в двух пакетах, то | |
| nginx считал ответ неверным; | |
| ошибка появилась в 0.1.29. | |
| </para> | |
| <para lang="en"> | |
| nginx treated the backend response as invalid if the status line in the | |
| header was transferred in two packets; | |
| the bug had appeared in 0.1.29. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива ssi_types. | |
| </para> | |
| <para lang="en"> | |
| the "ssi_types" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива autoindex_exact_size. | |
| </para> | |
| <para lang="en"> | |
| the "autoindex_exact_size" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_autoindex_module не поддерживал длинные имена файлов в UTF-8. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_autoindex_module did not support the long file names in UTF-8. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| IMAP/POP3 прокси. | |
| </para> | |
| <para lang="en"> | |
| the IMAP/POP3 proxy. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.37" date="2005-06-23"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| в конце файла nginx.pid теперь добавляется "\n". | |
| </para> | |
| <para lang="en"> | |
| now the "\n" is added to the end of the "nginx.pid" file. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при включении большого количества вставок или нескольких больших вставок | |
| с помощью SSI ответ мог передаваться не полностью. | |
| </para> | |
| <para lang="en"> | |
| the responses may be transferred not completely, | |
| if many parts or the big parts were included by SSI. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если все бэкенды возвращали ответ 404, то при использовании параметра http_404 | |
| в директивах proxy_next_upstream или fastcgi_next_upstream, nginx | |
| начинал запрашивать все бэкенды снова. | |
| </para> | |
| <para lang="en"> | |
| if all backends had returned the 404 response and the "http_404" parameter of | |
| the "proxy_next_upstream" or "fastcgi_next_upstream" directives was used, | |
| then nginx started to request all backends again. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.36" date="2005-06-15"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| если в заголовке запроса есть дублирующиеся строки "Host", "Connection", | |
| "Content-Length" и "Authorization", то nginx теперь выдаёт ошибку 400. | |
| </para> | |
| <para lang="en"> | |
| if the request header has duplicate the "Host", "Connection", "Content-Length", | |
| or "Authorization" lines, then nginx now returns the 400 error. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| директива post_accept_timeout упразднена. | |
| </para> | |
| <para lang="en"> | |
| the "post_accept_timeout" directive was canceled. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметры default, af=, bl=, deferred и bind в директиве listen. | |
| </para> | |
| <para lang="en"> | |
| the "default", "af=", "bl=", "deferred", and "bind" parameters | |
| of the "listen" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка accept фильтров во FreeBSD. | |
| </para> | |
| <para lang="en"> | |
| the FreeBSD accept filters support. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка TCP_DEFER_ACCEPT в Linux. | |
| </para> | |
| <para lang="en"> | |
| the Linux TCP_DEFER_ACCEPT support. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_autoindex_module не поддерживал имена файлов в UTF-8. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_autoindex_module did not support the file names in UTF-8. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| после добавления новый лог-файл ротация этого лога по сигналу -USR1 | |
| выполнялась, только если переконфигурировать nginx два раза по сигналу -HUP. | |
| </para> | |
| <para lang="en"> | |
| the new log file can be rotated by the -USR1 signal only if | |
| the reconfiguration by the -HUP signal was made twice. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.35" date="2005-06-07"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива working_directory. | |
| </para> | |
| <para lang="en"> | |
| the "working_directory" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива port_in_redirect. | |
| </para> | |
| <para lang="en"> | |
| the "port_in_redirect" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если заголовок ответа бэкенда не помещался в один пакет, то | |
| происходил segmentation fault; | |
| ошибка появилась в 0.1.29. | |
| </para> | |
| <para lang="en"> | |
| the segmentation fault was occurred if the backend response header was in | |
| several packets; | |
| the bug had appeared in 0.1.29. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если было сконфигурировано более 10 серверов или в сервере не описана | |
| директива "listen", | |
| то при запуске мог произойти segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| if more than 10 servers were configured or some server did not use the | |
| "listen" directive, then the segmentation fault was occurred on the start. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если ответ не помещался во временный файл, | |
| то мог произойти segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| the segmentation fault might occur if the response was bigger than | |
| the temporary file. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx возвращал ошибку 400 на запросы вида | |
| <nobr>"GET http://www.domain.com/uri HTTP/1.0"</nobr>; | |
| ошибка появилась в 0.1.28. | |
| </para> | |
| <para lang="en"> | |
| nginx returned the 400 response on requests like | |
| <nobr>"GET http://www.domain.com/uri HTTP/1.0"</nobr>; | |
| the bug had appeared in 0.1.28. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.34" date="2005-05-26"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при включении больших ответов с помощью SSI рабочий процесс мог зациклиться. | |
| </para> | |
| <para lang="en"> | |
| the worker process may got caught in an endless loop if the big response | |
| part were include by SSI. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| переменные, устанавливаемые директивой "set", не были доступны в SSI. | |
| </para> | |
| <para lang="en"> | |
| the variables set by the "set" directive were not available in SSI. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива autoindex_localtime. | |
| </para> | |
| <para lang="en"> | |
| the "autoindex_localtime" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| пустое значение в директиве proxy_set_header запрещает передачу заголовка. | |
| </para> | |
| <para lang="en"> | |
| the empty value of the "proxy_set_header" directive forbids the client | |
| request header line passing. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.33" date="2005-05-23"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался с параметром --without-pcre; | |
| ошибка появилась в 0.1.29. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built with the --without-pcre parameter; | |
| the bug had appeared in 0.1.29. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| 3, 5, 7 и 8 директив proxy_set_header на одном уровне вызывали | |
| bus fault при запуске. | |
| </para> | |
| <para lang="en"> | |
| 3, 4, 7, and 8 the "proxy_set_header" directives in one level cause | |
| the bus fault on start up. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в редиректах внутри HTTPS сервера был указан протокол HTTP. | |
| </para> | |
| <para lang="en"> | |
| the HTTP protocol was specified in the HTTPS redirects. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если директива rewrite использовала выделения внутри директивы if, то | |
| возвращалась ошибка 500. | |
| </para> | |
| <para lang="en"> | |
| if the "rewrite" directive used the captures inside the "if" directive, then | |
| the 500 error code was returned. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.32" date="2005-05-19"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в редиректах, выдаваемых с помощью директивы rewrite, не передавались аргументы; | |
| ошибка появилась в 0.1.29. | |
| </para> | |
| <para lang="en"> | |
| the arguments were omitted in the redirects, issued by the "rewrite" directive; | |
| the bug had appeared in 0.1.29. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива if поддерживает выделения в регулярных выражениях. | |
| </para> | |
| <para lang="en"> | |
| the "if" directive supports the captures in regular expressions. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива set поддерживает переменные и выделения из регулярных выражений. | |
| </para> | |
| <para lang="en"> | |
| the "set" directive supports the variables and the captures of regular | |
| expressions. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| в режиме прокси и FastCGI поддерживается строка заголовка "X-Accel-Redirect" | |
| в ответе бэкенда. | |
| </para> | |
| <para lang="en"> | |
| the "X-Accel-Redirect" response header line is supported in proxy and FastCGI | |
| mode. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.31" date="2005-05-16"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании SSL ответ мог передаваться не до конца. | |
| </para> | |
| <para lang="en"> | |
| the response encrypted by SSL may not transferred complete. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки при обработке SSI в ответе, полученного от FastCGI-сервера. | |
| </para> | |
| <para lang="en"> | |
| errors while processing FastCGI response by SSI. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки при использовании SSI и сжатия. | |
| </para> | |
| <para lang="en"> | |
| errors while using SSI and gzipping. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| редирект с кодом 301 передавался без тела ответа; | |
| ошибка появилась в 0.1.30. | |
| </para> | |
| <para lang="en"> | |
| the redirect with the 301 code was transferred without response body; | |
| the bug had appeared in 0.1.30. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.30" date="2005-05-14"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании SSI рабочий процесс мог зациклиться. | |
| </para> | |
| <para lang="en"> | |
| the worker process may got caught in an endless loop if the SSI was used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании SSL ответ мог передаваться не до конца. | |
| </para> | |
| <para lang="en"> | |
| the response encrypted by SSL may not transferred complete. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если длина части ответа, полученного за один раз от проксируемого или | |
| FastCGI сервера была равна 500 байт, то nginx возвращал код ответа 500; | |
| в режиме прокси ошибка появилась только в 0.1.29. | |
| </para> | |
| <para lang="en"> | |
| if the length of the response part received at once from proxied | |
| or FastCGI server was equal to 500, then nginx returns the 500 response code; | |
| in proxy mode the bug had appeared in 0.1.29 only. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не считал неверными директивы с 8-ю или 9-ю параметрами. | |
| </para> | |
| <para lang="en"> | |
| nginx did not consider the directives with 8 or 9 parameters as invalid. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива return может возвращать код ответа 204. | |
| </para> | |
| <para lang="en"> | |
| the "return" directive can return the 204 response code. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива ignore_invalid_headers. | |
| </para> | |
| <para lang="en"> | |
| the "ignore_invalid_headers" directive. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.29" date="2005-05-12"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_ssi_module поддерживает команду include virtual. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_ssi_module supports "include virtual" command. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_ssi_module поддерживает условную команду вида | |
| 'if expr="$NAME"' и команды else и endif. | |
| Допускается только один уровень вложенности. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_ssi_module supports the condition command like | |
| 'if expr="$NAME"' and "else" and "endif" commands. | |
| Only one nested level is supported. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_ssi_module поддерживает две переменные DATE_LOCAL и DATE_GMT | |
| и команду config timefmt. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_ssi_module supports the DATE_LOCAL and DATE_GMT variables | |
| and "config timefmt" command. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива ssi_ignore_recycled_buffers. | |
| </para> | |
| <para lang="en"> | |
| the "ssi_ignore_recycled_buffers" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если переменная QUERY_STRING не была определена, то в команде echo | |
| не ставилось значение по умолчанию. | |
| </para> | |
| <para lang="en"> | |
| the "echo" command did not show the default value for the empty QUERY_STRING | |
| variable. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| модуль ngx_http_proxy_module полностью переписан. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_proxy_module was rewritten. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы proxy_redirect, proxy_pass_request_headers, | |
| proxy_pass_request_body и proxy_method. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_redirect", "proxy_pass_request_headers", | |
| "proxy_pass_request_body", and "proxy_method" directives. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива proxy_set_header. | |
| Директива proxy_x_var упразднена и должна быть заменена директивой | |
| proxy_set_header. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_set_header" directive. | |
| The "proxy_x_var" was canceled and must be replaced with the proxy_set_header | |
| directive. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| директива proxy_preserve_host упразднена и должна быть заменена директивами | |
| "proxy_set_header Host $host" и "proxy_redirect off" | |
| или директивой <nobr>"proxy_set_header Host $host:$proxy_port"</nobr> | |
| и соответствующими ей директивами proxy_redirect. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_preserve_host" is canceled and must be replaced with | |
| the "proxy_set_header Host $host" and the "proxy_redirect off" directives, | |
| the <nobr>"proxy_set_header Host $host:$proxy_port" directive</nobr> | |
| and the appropriate proxy_redirect directives. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| директива proxy_set_x_real_ip упразднена и должна быть заменена директивой | |
| "proxy_set_header X-Real-IP $remote_addr". | |
| </para> | |
| <para lang="en"> | |
| the "proxy_set_x_real_ip" is canceled and must be replaced with | |
| the "proxy_set_header X-Real-IP $remote_addr" directive. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| директива proxy_add_x_forwarded_for упразднена и должна быть заменена | |
| директивой | |
| <nobr>"proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for".</nobr> | |
| </para> | |
| <para lang="en"> | |
| the "proxy_add_x_forwarded_for" is canceled and must be replaced with | |
| <nobr>the "proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for"</nobr> | |
| directive. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| директива proxy_set_x_url упразднена и должна быть заменена директивой | |
| <nobr>"proxy_set_header X-URL http://$host:$server_port$request_uri".</nobr> | |
| </para> | |
| <para lang="en"> | |
| the "proxy_set_x_url" is canceled and must be replaced with | |
| the "proxy_set_header X-URL http://$host:$server_port$request_uri" | |
| directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива fastcgi_param. | |
| </para> | |
| <para lang="en"> | |
| the "fastcgi_param" directive. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| директивы fastcgi_root, fastcgi_set_var и fastcgi_params упразднены | |
| и должны быть замены директивами fastcgi_param. | |
| </para> | |
| <para lang="en"> | |
| the "fastcgi_root", "fastcgi_set_var" and "fastcgi_params" directive | |
| are canceled and must be replaced with the fastcgi_param directives. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива index может использовать переменные. | |
| </para> | |
| <para lang="en"> | |
| the "index" directive can use the variables. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива index может быть указана на уровне http и server. | |
| </para> | |
| <para lang="en"> | |
| the "index" directive can be used at http and server levels. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| только последний параметр в директиве index может быть абсолютным. | |
| </para> | |
| <para lang="en"> | |
| the last index only in the "index" directive can be absolute. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| в директиве rewrite могут использоваться переменные. | |
| </para> | |
| <para lang="en"> | |
| the "rewrite" directive can use the variables. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива internal. | |
| </para> | |
| <para lang="en"> | |
| the "internal" directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| переменные CONTENT_LENGTH, CONTENT_TYPE, REMOTE_PORT, SERVER_ADDR, | |
| SERVER_PORT, SERVER_PROTOCOL, DOCUMENT_ROOT, SERVER_NAME, | |
| REQUEST_METHOD, REQUEST_URI и REMOTE_USER. | |
| </para> | |
| <para lang="en"> | |
| the CONTENT_LENGTH, CONTENT_TYPE, REMOTE_PORT, SERVER_ADDR, | |
| SERVER_PORT, SERVER_PROTOCOL, DOCUMENT_ROOT, SERVER_NAME, | |
| REQUEST_METHOD, REQUEST_URI, and REMOTE_USER variables. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| nginx теперь передаёт неверные строки в заголовках запроса клиента и | |
| ответа бэкенда. | |
| </para> | |
| <para lang="en"> | |
| nginx now passes the invalid lines in a client request headers | |
| or a backend response header. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если бэкенд долго не передавал ответ и send_timeout был меньше, чем | |
| proxy_read_timeout, то клиенту возвращался ответ 408. | |
| </para> | |
| <para lang="en"> | |
| if the backend did not transfer response for a long time and | |
| the "send_timeout" was less than "proxy_read_timeout", then nginx | |
| returned the 408 response. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если бэкенд передавал неверную строку в заголовке ответа, то происходил | |
| segmentation fault; | |
| ошибка появилась в 0.1.26. | |
| </para> | |
| <para lang="en"> | |
| the segmentation fault was occurred if the backend sent an invalid line | |
| in response header; | |
| the bug had appeared in 0.1.26. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании отказоустойчивой конфигурации в FastCGI мог | |
| происходить segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| the segmentation fault may occurred in FastCGI fault tolerance configuration. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива expires не удаляла уже установленные строки заголовка | |
| "Expires" и "Cache-Control". | |
| </para> | |
| <para lang="en"> | |
| the "expires" directive did not remove the previous "Expires" and | |
| "Cache-Control" headers. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не учитывал завершающую точку в строке заголовка запроса "Host". | |
| </para> | |
| <para lang="en"> | |
| nginx did not take into account trailing dot in "Host" header line. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_auth_module не работал на Linux. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_auth_module did not work under Linux. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива rewrite неверно работала, если в запросе присутствовали аргументы. | |
| </para> | |
| <para lang="en"> | |
| the rewrite directive worked incorrectly, if the arguments were in a request. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на MacOS X. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on MacOS X. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.28" date="2005-04-08"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при проксировании больших файлов nginx сильно нагружал процессор. | |
| </para> | |
| <para lang="en"> | |
| nginx hogs CPU while proxying the huge files. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался gcc 4.0 на Linux. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built by gcc 4.0 on Linux. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.27" date="2005-03-28"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр blocked в директиве valid_referers. | |
| </para> | |
| <para lang="en"> | |
| the "blocked" parameter of the "valid_referers" directive. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| ошибки обработки заголовка запроса теперь записываются на уровне | |
| info, в лог также записывается имя сервера и строки заголовка | |
| запроса "Host" и "Referer". | |
| </para> | |
| <para lang="en"> | |
| the errors while handling the request header now logged at "info" level. | |
| The server name and the "Host" and "Referer" header lines also logged. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| при записи ошибок в лог записывается также строка заголовка запроса "Host". | |
| </para> | |
| <para lang="en"> | |
| the "Host" header line is also logged in error log. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива proxy_pass_unparsed_uri. | |
| Специальная обработка символов "://" в URI, введённая в версии 0.1.11, | |
| теперь упразднена. | |
| </para> | |
| <para lang="en"> | |
| the proxy_pass_unparsed_uri directive. | |
| The special handling of the "://" symbols in URI, appeared in 0.1.11 version, | |
| now is canceled. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на FreeBSD и Linux, если был указан параметр конфигурации | |
| --without-ngx_http_auth_basic_module. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on FreeBSD and Linux, if the | |
| --without-ngx_http_auth_basic_module configuration parameter was used. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.26" date="2005-03-22"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| неверные строки заголовка, переданные клиентом, теперь игнорируется и | |
| записываются в error_log на уровне info. | |
| </para> | |
| <para lang="en"> | |
| the invalid client header lines are now ignored and logged at the info level. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| при записи ошибок в лог записывается также имя сервера, при обращении | |
| к которому произошла ошибка. | |
| </para> | |
| <para lang="en"> | |
| the server name is also logged in error log. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_auth_basic_module и директивы auth_basic и | |
| auth_basic_user_file. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_auth_basic_module module and the auth_basic and | |
| auth_basic_user_file directives. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.25" date="2005-03-19"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не работал на Linux parisc. | |
| </para> | |
| <para lang="en"> | |
| nginx did run on Linux parisc. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| nginx теперь не запускается под FreeBSD, если значение | |
| sysctl kern.ipc.somaxconn слишком большое. | |
| </para> | |
| <para lang="en"> | |
| nginx now does not start under FreeBSD if the sysctl kern.ipc.somaxconn | |
| value is too big. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если модуль ngx_http_index_module делал внутреннее перенаправление запроса | |
| в модули ngx_http_proxy_module или ngx_http_fastcgi_module, то файл индекса | |
| не закрывался после обслуживания запроса. | |
| </para> | |
| <para lang="en"> | |
| if a request was internally redirected by the ngx_http_index_module | |
| module to the ngx_http_proxy_module or ngx_http_fastcgi_module modules, | |
| then the index file was not closed after request completion. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива proxy_pass может использоваться в location, заданных регулярным | |
| выражением. | |
| </para> | |
| <para lang="en"> | |
| the "proxy_pass" can be used in location with regular expression. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_rewrite_filter_module поддерживает условия вида | |
| "if ($HTTP_USER_AGENT ~ MSIE)". | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_rewrite_filter_module module supports the condition like | |
| "if ($HTTP_USER_AGENT ~ MSIE)". | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx очень медленно запускался при большом количестве адресов и | |
| использовании текстовых значений в директиве geo. | |
| </para> | |
| <para lang="en"> | |
| nginx started too slow if the large number of addresses and text values | |
| were used in the "geo" directive. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| имя переменной в директиве geo нужно указывать, как $name. | |
| Прежний вариант без "$" пока работает, но вскоре будет убран. | |
| </para> | |
| <para lang="en"> | |
| a variable name must be declared as "$name" in the "geo" directive. | |
| The previous variant without "$" is still supported, but will be removed soon. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр лога "%{VARIABLE}v". | |
| </para> | |
| <para lang="en"> | |
| the "%{VARIABLE}v" logging parameter. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива "set $name value". | |
| </para> | |
| <para lang="en"> | |
| the "set $name value" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| совместимость с gcc 4.0. | |
| </para> | |
| <para lang="en"> | |
| gcc 4.0 compatibility. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр автоконфигурации --with-openssl-opt=OPTIONS. | |
| </para> | |
| <para lang="en"> | |
| the --with-openssl-opt=OPTIONS autoconfiguration directive. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.24" date="2005-03-04"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_ssi_filter_module поддерживает переменные | |
| QUERY_STRING и DOCUMENT_URI. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_ssi_filter_module supports the QUERY_STRING and DOCUMENT_URI | |
| variables. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_autoindex_module мог выдавать ответ 404 | |
| на существующий каталог, если этот каталог был указан как alias. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_autoindex_module may some times return the 404 response | |
| for existent directory, if this directory was used in "alias" directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_ssi_filter_module неправильно работал при больших | |
| ответах. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_ssi_filter_module ran incorrectly for large responses. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| отсутствие строки заголовка "Referer" всегда считалось правильным referrer'ом. | |
| </para> | |
| <para lang="en"> | |
| the lack of the "Referer" header line was always accounted as valid referrer. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.23" date="2005-03-01"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_ssi_filter_module и | |
| директивы ssi, ssi_silent_errors и ssi_min_file_chunk. | |
| Поддерживаются команды 'echo var="HTTP_..." default=""' и | |
| 'echo var="REMOTE_ADDR"'. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_ssi_filter_module and | |
| the ssi, ssi_silent_errors, and ssi_min_file_chunk directives. | |
| The 'echo var="HTTP_..." default=""' and 'echo var="REMOTE_ADDR"' commands | |
| are supported. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр лога %request_time. | |
| </para> | |
| <para lang="en"> | |
| the %request_time log parameter. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| если запрос пришёл без строки заголовка "Host", то директива | |
| proxy_preserve_host устанавливает в качестве этого заголовка первое имя | |
| сервера из директивы server_name. | |
| </para> | |
| <para lang="en"> | |
| if the request has no the "Host" header line, then the "proxy_preserve_host" | |
| directive set this header line to the first server name of the "server_name" | |
| directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался на платформах, отличных от i386, amd64, sparc и ppc; | |
| ошибка появилась в 0.1.22. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on platforms different from i386, amd64, sparc, | |
| and ppc; | |
| the bug had appeared in 0.1.22. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_autoindex_module теперь показывает информацию не о | |
| символическом линке, а о файле или каталоге, на который он указывает. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_autoindex_module now shows the information not about the symlink, | |
| but about file or directory it points to. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если клиенту ничего не передавалось, то параметр %apache_length | |
| записывал в лог отрицательную длину заголовка ответа. | |
| </para> | |
| <para lang="en"> | |
| the %apache_length parameter logged the negative length | |
| of the response header if the no response was transferred to a client. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.22" date="2005-02-22"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_stub_status_module показывал неверную статистику | |
| для обработанных соединений, если использовалось проксирование | |
| или FastCGI-сервер. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_stub_status_module showed incorrect handled connections | |
| statistics if the proxying or FastCGI server were used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| на Linux и Solaris установочные пути были неверно заключены в кавычки; | |
| ошибка появилась в 0.1.21. | |
| </para> | |
| <para lang="en"> | |
| the installation paths were incorrectly quoted on Linux and Solaris; | |
| the bug had appeared in 0.1.21. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.21" date="2005-02-22"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль ngx_http_stub_status_module показывал неверную статистику | |
| при использовании метода rtsig или при использовании нескольких | |
| рабочих процессов на SMP машине. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_stub_status_module showed incorrect statistics | |
| if "rtsig" method was used or if several worker process ran on SMP. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался компилятором icc под Линуксом или | |
| если библиотека zlib-1.2.x собиралась из исходных текстов. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built by the icc compiler on Linux or | |
| if the zlib-1.2.x library was building from sources. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался под NetBSD 2.0. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on NetBSD 2.0. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.20" date="2005-02-17"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| новые параметры script_filename и remote_port в директиве fastcgi_params. | |
| </para> | |
| <para lang="en"> | |
| the new "script_filename" and "remote_port" parameters | |
| of the fastcgi_params directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| неправильно обрабатывался поток stderr от FastCGI-сервера. | |
| </para> | |
| <para lang="en"> | |
| the FastCGI stderr stream was handled incorrectly. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.19" date="2005-02-16"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если в запросе есть нуль, то для локальных запросов теперь возвращается | |
| ошибка 404. | |
| </para> | |
| <para lang="en"> | |
| now, if request contains the zero, then the 404 error is returned | |
| for the local requests. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался под NetBSD 2.0. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on NetBSD 2.0. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| во время чтения тела запроса клиента в SSL соединении мог произойти таймаут. | |
| </para> | |
| <para lang="en"> | |
| the timeout may occur while reading of the client request body | |
| via SSL connections. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.18" date="2005-02-09"> | |
| <change type="workaround"> | |
| <para lang="ru"> | |
| для совместимости с Solaris 10 в директивах devpoll_events и devpoll_changes | |
| значения по умолчанию уменьшены с 512 до 32. | |
| </para> | |
| <para lang="en"> | |
| the default values of the devpoll_events and the devpoll_changes directives | |
| changed from 512 to 32 to be compatible with Solaris 10. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директивы proxy_set_x_var и fastcgi_set_var не наследовались. | |
| </para> | |
| <para lang="en"> | |
| the proxy_set_x_var and fastcgi_set_var directives were not inherited. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в директиве rewrite, возвращающей редирект, аргументы присоединялись | |
| к URI через символ "&" вместо "?". | |
| </para> | |
| <para lang="en"> | |
| in a redirect rewrite directive arguments were concatenated with URI | |
| by an "&" rather than a "?". | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| строки для модуля ngx_http_geo_module без символа ";" во включённом файле | |
| игнорировались. | |
| </para> | |
| <para lang="en"> | |
| the lines without trailing ";" in the file being included | |
| by the ngx_http_geo_module were silently ignored. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_stub_status_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_stub_status_module. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| неизвестный формат лог-файла в директиве access_log вызывал segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| the unknown log format in the access_log directive caused | |
| the segmentation fault. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| новый параметр document_root в директиве fastcgi_params. | |
| </para> | |
| <para lang="en"> | |
| the new "document_root" parameter of the fastcgi_params directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива fastcgi_redirect_errors. | |
| </para> | |
| <para lang="en"> | |
| the fastcgi_redirect_errors directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| новый модификатор break в директиве rewrite позволяет прекратить | |
| цикл rewrite/location и устанавливает текущую конфигурацию для запроса. | |
| </para> | |
| <para lang="en"> | |
| the new "break" modifier of the "rewrite" directive allows to stop | |
| the rewrite/location cycle and sets the current configuration to the request. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.17" date="2005-02-03"> | |
| <change type="change"> | |
| <para lang="ru"> | |
| модуль ngx_http_rewrite_module полностью переписан. | |
| Теперь можно делать редиректы, возвращать коды ошибок | |
| и проверять переменные и рефереры. | |
| Эти директивы можно использовать внутри location. | |
| Директива redirect упразднена. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_rewrite_module was rewritten from the scratch. | |
| Now it is possible to redirect, to return the error codes, | |
| to check the variables and referrers. The directives can be used | |
| inside locations. | |
| The redirect directive was canceled. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_geo_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_geo_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы proxy_set_x_var и fastcgi_set_var. | |
| </para> | |
| <para lang="en"> | |
| the proxy_set_x_var and fastcgi_set_var directives. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| конфигурация location с модификатором "=" могла использоваться | |
| в другом location. | |
| </para> | |
| <para lang="en"> | |
| the location configuration with "=" modifier may be used in another | |
| location. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| правильный тип ответа выставлялся только для запросов, у которых в расширении | |
| были только маленькие буквы. | |
| </para> | |
| <para lang="en"> | |
| the correct content type was set only for requests that use small caps letters | |
| in extension. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если для location установлен proxy_pass или fastcgi_pass, и доступ | |
| к нему запрещался, а ошибка перенаправлялась на статическую страницу, | |
| то происходил segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| if the proxy_pass or fastcgi_pass directives were set in the location, | |
| and access was denied, and the error was redirected to a static page, | |
| then the segmentation fault occurred. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если в проксированном ответе в заголовке "Location" передавался | |
| относительный URL, то к нему добавлялось имя хоста и слэш; | |
| ошибка появилась в 0.1.14. | |
| </para> | |
| <para lang="en"> | |
| if in a proxied "Location" header was a relative URL, | |
| then a host name and a slash were added to them; | |
| the bug had appeared in 0.1.14. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| на Linux в лог не записывался текст системной ошибки. | |
| </para> | |
| <para lang="en"> | |
| the system error message was not logged on Linux. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.16" date="2005-01-25"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если ответ передавался chunk'ами, то при запросе HEAD выдавался | |
| завершающий chunk. | |
| </para> | |
| <para lang="en"> | |
| if the response were transferred by chunks, then on the HEAD request | |
| the final chunk was issued. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| заголовок "Connection: keep-alive" выдавался, даже если директива | |
| keepalive_timeout запрещала использование keep-alive. | |
| </para> | |
| <para lang="en"> | |
| the "Connection: keep-alive" header were issued, even if the | |
| keepalive_timeout directive forbade the keep-alive use. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки в модуле ngx_http_fastcgi_module вызывали segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| the errors in the ngx_http_fastcgi_module caused the segmentation faults. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании SSL сжатый ответ мог передаваться не до конца. | |
| </para> | |
| <para lang="en"> | |
| the compressed response encrypted by SSL may not transferred complete. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| опции TCP_NODELAY, TCP_NOPUSH и TCP_CORK, специфичные для TCP сокетов, | |
| не используются для unix domain сокетов. | |
| </para> | |
| <para lang="en"> | |
| the TCP-specific TCP_NODELAY, TCP_NOPUSH, and TCP_CORK options, | |
| are not used for the unix domain sockets. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива rewrite поддерживает перезаписывание аргументов. | |
| </para> | |
| <para lang="en"> | |
| the rewrite directive supports the arguments rewriting. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| на запрос POST с заголовком "Content-Length: 0" возвращался ответ 400; | |
| ошибка появилась в 0.1.14. | |
| </para> | |
| <para lang="en"> | |
| the response code 400 was returned for the POST request with the | |
| "Content-Length: 0" header; | |
| the bug had appeared in 0.1.14. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.15" date="2005-01-19"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибка соединения с FastCGI-сервером вызывала segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| the error while the connecting to the FastCGI server caused | |
| segmentation fault. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| корректная обработка регулярного выражения, в котором число | |
| выделенных частей не совпадает с числом подстановок. | |
| </para> | |
| <para lang="en"> | |
| the correct handling of the regular expression, that | |
| has different number of the captures and substitutions. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| location, который передаётся FastCGI-серверу, может быть задан | |
| с помощью регулярного выражения. | |
| </para> | |
| <para lang="en"> | |
| the location, that is passed to the FastCGI server, can be | |
| regular expression. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| параметр FastCGI REQUEST_URI теперь передаётся вместе с аргументами | |
| и в том виде, в котором был получен от клиента. | |
| </para> | |
| <para lang="en"> | |
| the FastCGI's parameter REQUEST_URI is now passed with the arguments | |
| and in the original state. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| для использования регулярных выражений в location нужно было | |
| собирать nginx вместе с ngx_http_rewrite_module. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_rewrite_module module was required to be built to use | |
| the regular expressions in locations. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если бэкенд слушал на 80-ом порту, то при использовании директивы | |
| <nobr>"proxy_preserve_host on"</nobr> в заголовке "Host" указывался | |
| также порт 80; | |
| ошибка появилась в 0.1.14. | |
| </para> | |
| <para lang="en"> | |
| the directive <nobr>"proxy_preserve_host on"</nobr> adds port 80 | |
| to the "Host" headers, if upstream listen on port 80; | |
| the bug had appeared in 0.1.14. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если задать одинаковые пути в параметрах автоконфигурации | |
| --http-client-body-temp-path=PATH и --http-proxy-temp-path=PATH | |
| или --http-client-body-temp-path=PATH и --http-fastcgi-temp-path=PATH, | |
| то происходил segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| the same paths in autoconfiguration parameters | |
| --http-client-body-temp-path=PATH and --http-proxy-temp-path=PATH, | |
| or --http-client-body-temp-path=PATH and --http-fastcgi-temp-path=PATH | |
| caused segmentation fault. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.14" date="2005-01-18"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметры автоконфигурации | |
| --http-client-body-temp-path=PATH, | |
| --http-proxy-temp-path=PATH | |
| и --http-fastcgi-temp-path=PATH | |
| </para> | |
| <para lang="en"> | |
| the autoconfiguration directives: | |
| --http-client-body-temp-path=PATH, | |
| --http-proxy-temp-path=PATH, | |
| and --http-fastcgi-temp-path=PATH | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| имя каталога с временными файлами, содержащие тело запроса клиента, | |
| задаётся директивой client_body_temp_path, | |
| по умолчанию <prefix>/client_body_temp. | |
| </para> | |
| <para lang="en"> | |
| the directory name for the temporary files with the client request body | |
| is specified by directive client_body_temp_path, | |
| by default it is <prefix>/client_body_temp. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_fastcgi_module и директивы | |
| fastcgi_pass, | |
| fastcgi_root, | |
| fastcgi_index, | |
| fastcgi_params, | |
| fastcgi_connect_timeout, | |
| fastcgi_send_timeout, | |
| fastcgi_read_timeout, | |
| fastcgi_send_lowat, | |
| fastcgi_header_buffer_size, | |
| fastcgi_buffers, | |
| fastcgi_busy_buffers_size, | |
| fastcgi_temp_path, | |
| fastcgi_max_temp_file_size, | |
| fastcgi_temp_file_write_size, | |
| fastcgi_next_upstream | |
| и fastcgi_x_powered_by. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_fastcgi_module and the directives: | |
| fastcgi_pass, | |
| fastcgi_root, | |
| fastcgi_index, | |
| fastcgi_params, | |
| fastcgi_connect_timeout, | |
| fastcgi_send_timeout, | |
| fastcgi_read_timeout, | |
| fastcgi_send_lowat, | |
| fastcgi_header_buffer_size, | |
| fastcgi_buffers, | |
| fastcgi_busy_buffers_size, | |
| fastcgi_temp_path, | |
| fastcgi_max_temp_file_size, | |
| fastcgi_temp_file_write_size, | |
| fastcgi_next_upstream, | |
| and fastcgi_x_powered_by. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибка "[alert] zero size buf"; | |
| ошибка появилась в 0.1.3. | |
| </para> | |
| <para lang="en"> | |
| the "[alert] zero size buf" error; | |
| the bug had appeared in 0.1.3. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| в директиве proxy_pass нужно обязательно указывать URI после имени хоста. | |
| </para> | |
| <para lang="en"> | |
| the URI must be specified after the host name in the proxy_pass directive. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| если в URI встречался символ %3F, то он считался началом строки аргументов. | |
| </para> | |
| <para lang="en"> | |
| the %3F symbol in the URI was considered as the argument string start. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| поддержка unix domain сокетов в модуле ngx_http_proxy_module. | |
| </para> | |
| <para lang="en"> | |
| the unix domain sockets support in the ngx_http_proxy_module. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы ssl_engine и ssl_ciphers.<br/> | |
| Спасибо Сергею Скворцову за SSL-акселератор. | |
| </para> | |
| <para lang="en"> | |
| the ssl_engine and ssl_ciphers directives.<br/> | |
| Thanks to Sergey Skvortsov for SSL-accelerator. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.13" date="2004-12-21"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директивы server_names_hash и server_names_hash_threshold. | |
| </para> | |
| <para lang="en"> | |
| the server_names_hash and server_names_hash_threshold directives. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| имена *.domain.tld в директиве server_name не работали. | |
| </para> | |
| <para lang="en"> | |
| the *.domain.tld names in the "server_name" directive did not work. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| параметр лога %request_length записывал неверную длину. | |
| </para> | |
| <para lang="en"> | |
| the %request_length log parameter logged the incorrect length. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.12" date="2004-12-06"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметр лога %request_length. | |
| </para> | |
| <para lang="en"> | |
| the %request_length log parameter. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании /dev/poll, select и poll на платформах, где возможны | |
| ложные срабатывания указанных методов, могли быть длительные задержки | |
| при обработке запроса по keep-alive соединению. | |
| Наблюдалось по крайней мере на Solaris с использованием /dev/poll. | |
| </para> | |
| <para lang="en"> | |
| when using the /dev/poll, select and poll on the platforms, where | |
| these methods may do the false reports, there may be the long delay when | |
| the request was passed via the keep-alive connection. | |
| It may be at least on Solaris when using the /dev/poll. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива send_lowat игнорируется на Linux, так как Linux не поддерживает | |
| опцию SO_SNDLOWAT. | |
| </para> | |
| <para lang="en"> | |
| the send_lowat directive is ignored on Linux because Linux does not support | |
| the SO_SNDLOWAT option. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.11" date="2004-12-02"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива worker_priority. | |
| </para> | |
| <para lang="en"> | |
| the worker_priority directive. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| под FreeBSD директивы tcp_nopush и tcp_nodelay вместе влияют на передачу | |
| ответа. | |
| </para> | |
| <para lang="en"> | |
| both tcp_nopush and tcp_nodelay directives affect the transferred response. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не вызывал initgroups().<br/> | |
| Спасибо Андрею Ситникову и Андрею Нигматулину. | |
| </para> | |
| <para lang="en"> | |
| nginx did not call initgroups().<br/> | |
| Thanks to Andrew Sitnikov and Andrei Nigmatulin. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| ngx_http_auto_index_module теперь выдаёт размер файлов в байтах. | |
| </para> | |
| <para lang="en"> | |
| now the ngx_http_autoindex_module shows the file size in the bytes. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ngx_http_auto_index_module возвращал ошибку 500, если в каталоге есть | |
| битый symlink. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_autoindex_module returned the 500 error if the broken symlink | |
| was in a directory. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| файлы больше 4G не передавались с использованием sendfile. | |
| </para> | |
| <para lang="en"> | |
| the files bigger than 4G could not be transferred using sendfile. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если бэкенд резолвился в несколько адресов и при ожидании от него ответа | |
| происходила ошибка, то процесс зацикливался. | |
| </para> | |
| <para lang="en"> | |
| if the backend was resolved to several backends and there was an error while | |
| the response waiting then process may got caught in an endless loop. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании метода /dev/poll рабочий процесс мог завершиться | |
| с сообщением "unknown cycle". | |
| </para> | |
| <para lang="en"> | |
| the worker process may exit with the "unknown cycle" message when the /dev/poll | |
| method was used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки "close() channel failed". | |
| </para> | |
| <para lang="en"> | |
| "close() channel failed" errors. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| автоматическое определение групп nobody и nogroup. | |
| </para> | |
| <para lang="en"> | |
| the autodetection of the "nobody" and "nogroup" groups. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| директива send_lowat не работала на Linux. | |
| </para> | |
| <para lang="en"> | |
| the send_lowat directive did not work on Linux. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если в конфигурации не было раздела events, то происходил segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| the segmentation fault occurred if there was no events section | |
| in configuration. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| nginx не собирался под OpenBSD. | |
| </para> | |
| <para lang="en"> | |
| nginx could not be built on OpenBSD. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| двойные слэшы в "://" в URI превращались в ":/". | |
| </para> | |
| <para lang="en"> | |
| the double slashes in "://" in the URI were converted to ":/". | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.10" date="2004-11-26"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если в запросе без аргументов есть "//", "/./", "/../" или "%XX", | |
| то терялся последний символ в строке запроса; | |
| ошибка появилась в 0.1.9. | |
| </para> | |
| <para lang="en"> | |
| if the request without arguments contains "//", "/./", "/../" or "%XX" | |
| then the last character in the request line was lost; | |
| the bug had appeared in 0.1.9. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| исправление в версии 0.1.9 для файлов больше 2G на Linux не работало. | |
| </para> | |
| <para lang="en"> | |
| the fix in 0.1.9 for the files bigger than 2G on Linux did not work. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.9" date="2004-11-25"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| если в запросе есть "//", "/./", "/../" или "%XX", то проксируемый | |
| запрос передавался без аргументов. | |
| </para> | |
| <para lang="en"> | |
| the proxied request was sent without arguments if the request contains | |
| "//", "/./", "/../" or "%XX". | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при сжатии больших ответов иногда они передавались не полностью. | |
| </para> | |
| <para lang="en"> | |
| the large compressed responses may be transferred not completely. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| не передавались файлы больше 2G на Linux, неподдерживающем sendfile64(). | |
| </para> | |
| <para lang="en"> | |
| the files bigger than 2G was not transferred on Linux that does not support | |
| sendfile64(). | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| на Linux при конфигурации сборки нужно было обязательно использовать | |
| параметр --with-poll_module; | |
| ошибка появилась в 0.1.8. | |
| </para> | |
| <para lang="en"> | |
| while the build configuration on Linux the --with-poll_module parameter | |
| was required; | |
| the bug had appeared in 0.1.8. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.8" date="2004-11-20"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибка в модуле ngx_http_autoindex_module при показе длинных имён файлов. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_autoindex_module if the long file names were in the listing. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модификатор "^~" в директиве location. | |
| </para> | |
| <para lang="en"> | |
| the "^~" modifier in the location directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива proxy_max_temp_file_size. | |
| </para> | |
| <para lang="en"> | |
| the proxy_max_temp_file_size directive. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.7" date="2004-11-12"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании sendfile, если передаваемый файл менялся, то мог | |
| произойти segmentation fault на FreeBSD; | |
| ошибка появилась в 0.1.5. | |
| </para> | |
| <para lang="en"> | |
| on FreeBSD the segmentation fault may occur if the size of the transferred | |
| file was changed; | |
| the bug had appeared in 0.1.5. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.6" date="2004-11-11"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при некоторых комбинациях директив location c регулярными выражениями | |
| использовалась конфигурация не из того location. | |
| </para> | |
| <para lang="en"> | |
| some location directive combinations with the regular expressions caused | |
| the wrong configuration choose. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.5" date="2004-11-11"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| на Solaris и Linux могло быть очень много сообщений "recvmsg() returned | |
| not enough data". | |
| </para> | |
| <para lang="en"> | |
| on Solaris and Linux there may be too many "recvmsg() returned not enough data" | |
| alerts. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в режиме прокси без использования sendfile на Solaris возникала | |
| ошибка "writev() failed <nobr>(22: Invalid argument)".</nobr> | |
| На других платформах, не поддерживающих sendfile, процесс зацикливался. | |
| </para> | |
| <para lang="en"> | |
| there were the "writev() failed <nobr>(22: Invalid argument)"</nobr> errors on | |
| Solaris in proxy mode without sendfile. On other platforms that do not | |
| support sendfile at all the process got caught in an endless loop. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании sendfile в режиме прокси на Solaris возникал | |
| segmentation fault. | |
| </para> | |
| <para lang="en"> | |
| segmentation fault on Solaris in proxy mode and using sendfile. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| segmentation fault на Solaris. | |
| </para> | |
| <para lang="en"> | |
| segmentation fault on Solaris. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| обновление исполняемого файла на лету не работало на Linux. | |
| </para> | |
| <para lang="en"> | |
| on-line upgrade did not work on Linux. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| в списке файлов, выдаваемом модулем ngx_http_autoindex_module, | |
| не перекодировались пробелы, кавычки и знаки процента. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_autoindex_module module did not escape the spaces, | |
| the quotes, and the percent signs in the directory listing. | |
| </para> | |
| </change> | |
| <change type="change"> | |
| <para lang="ru"> | |
| уменьшение операций копирования. | |
| </para> | |
| <para lang="en"> | |
| the decrease of the copy operations. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива userid_p3p. | |
| </para> | |
| <para lang="en"> | |
| the userid_p3p directive. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.4" date="2004-10-26"> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибка в модуле ngx_http_autoindex_module. | |
| </para> | |
| <para lang="en"> | |
| in the ngx_http_autoindex_module. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.3" date="2004-10-25"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| модуль ngx_http_autoindex_module и директива autoindex. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_autoindex_module and the autoindex directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива proxy_set_x_url. | |
| </para> | |
| <para lang="en"> | |
| the proxy_set_x_url directive. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль проксировании мог привести к зацикливанию, если не использовался | |
| sendfile. | |
| </para> | |
| <para lang="en"> | |
| proxy module may get caught in an endless loop when sendfile is not used. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.2" date="2004-10-21"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| параметры --user=USER, --group=GROUP и --with-ld-opt=OPTIONS в configure. | |
| </para> | |
| <para lang="en"> | |
| the --user=USER, --group=GROUP, and --with-ld-opt=OPTIONS options in configure. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива server_name поддерживает *.domain.tld. | |
| </para> | |
| <para lang="en"> | |
| the server_name directive supports *.domain.tld. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| улучшена переносимость на неизвестные платформы. | |
| </para> | |
| <para lang="en"> | |
| the portability improvements. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| нельзя переконфигурировать nginx, если конфигурационный файл указан | |
| в командной строке; | |
| ошибка появилась в 0.1.1. | |
| </para> | |
| <para lang="en"> | |
| if configuration file was set in command line, the reconfiguration | |
| was impossible; | |
| the bug had appeared in 0.1.1. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль проксировании мог привести к зацикливанию, если не использовался | |
| sendfile. | |
| </para> | |
| <para lang="en"> | |
| proxy module may get caught in an endless loop when sendfile is not used. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при использовании sendfile текст ответа не перекодировался | |
| согласно директивам модуля charset; | |
| ошибка появилась в 0.1.1. | |
| </para> | |
| <para lang="en"> | |
| with sendfile the response was not recoded according to the charset | |
| module directives; | |
| the bug had appeared in 0.1.1. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| очень редкая ошибка при обработке kqueue. | |
| </para> | |
| <para lang="en"> | |
| very seldom bug in the kqueue processing. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| модуль сжатия сжимал уже сжатые ответы, полученные при проксировании. | |
| </para> | |
| <para lang="en"> | |
| the gzip module compressed the proxied responses that was already compressed. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.1" date="2004-10-11"> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива gzip_types. | |
| </para> | |
| <para lang="en"> | |
| the gzip_types directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива tcp_nodelay. | |
| </para> | |
| <para lang="en"> | |
| the tcp_nodelay directive. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| директива send_lowat работает не только на платформах, поддерживающих | |
| kqueue NOTE_LOWAT, но и на всех, поддерживающих SO_SNDLOWAT. | |
| </para> | |
| <para lang="en"> | |
| the send_lowat directive is working not only on OSes that support | |
| kqueue NOTE_LOWAT, but also on OSes that support SO_SNDLOWAT. | |
| </para> | |
| </change> | |
| <change type="feature"> | |
| <para lang="ru"> | |
| эмуляция setproctitle() для Linux и Solaris. | |
| </para> | |
| <para lang="en"> | |
| the setproctitle() emulation for Linux and Solaris. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибка при переписывании заголовка "Location" при проксировании. | |
| </para> | |
| <para lang="en"> | |
| the "Location" header rewrite bug fixed while the proxying. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибка в модуле ngx_http_chunked_module, приводившая к зацикливанию. | |
| </para> | |
| <para lang="en"> | |
| the ngx_http_chunked_module module may get caught in an endless loop. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| ошибки в модуле /dev/poll. | |
| </para> | |
| <para lang="en"> | |
| the /dev/poll module bugs fixed. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| при проксировании и использовании временных файлов ответы портились. | |
| </para> | |
| <para lang="en"> | |
| the responses were corrupted when the temporary files were used | |
| while the proxying. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| бэкенду передавались запросы с неперекодированными символами. | |
| </para> | |
| <para lang="en"> | |
| the unescaped requests were passed to the backend. | |
| </para> | |
| </change> | |
| <change type="bugfix"> | |
| <para lang="ru"> | |
| на Linux 2.4 при конфигурации сборки нужно было обязательно использовать | |
| параметр --with-poll_module. | |
| </para> | |
| <para lang="en"> | |
| while the build configuration on Linux 2.4 the --with-poll_module parameter | |
| was required. | |
| </para> | |
| </change> | |
| </changes> | |
| <changes ver="0.1.0" date="2004-10-04"> | |
| <change> | |
| <para lang="ru"> | |
| Первая публично доступная версия. | |
| </para> | |
| <para lang="en"> | |
| The first public version. | |
| </para> | |
| </change> | |
| </changes> | |
| </change_log> |