|  |  | 
|  | /* | 
|  | * Copyright (C) Igor Sysoev | 
|  | * Copyright (C) Nginx, Inc. | 
|  | */ | 
|  |  | 
|  |  | 
|  | #include <ngx_config.h> | 
|  | #include <ngx_core.h> | 
|  |  | 
|  | /* | 
|  | * The threads implementation uses the rfork(RFPROC|RFTHREAD|RFMEM) syscall | 
|  | * to create threads.  All threads use the stacks of the same size mmap()ed | 
|  | * below the main stack.  Thus the current thread id is determined via | 
|  | * the stack pointer value. | 
|  | * | 
|  | * The mutex implementation uses the ngx_atomic_cmp_set() operation | 
|  | * to acquire a mutex and the SysV semaphore to wait on a mutex and to wake up | 
|  | * the waiting threads.  The light mutex does not use semaphore, so after | 
|  | * spinning in the lock the thread calls sched_yield().  However the light | 
|  | * mutexes are intended to be used with the "trylock" operation only. | 
|  | * The SysV semop() is a cheap syscall, particularly if it has little sembuf's | 
|  | * and does not use SEM_UNDO. | 
|  | * | 
|  | * The condition variable implementation uses the signal #64. | 
|  | * The signal handler is SIG_IGN so the kill() is a cheap syscall. | 
|  | * The thread waits a signal in kevent().  The use of the EVFILT_SIGNAL | 
|  | * is safe since FreeBSD 4.10-STABLE. | 
|  | * | 
|  | * This threads implementation currently works on i386 (486+) and amd64 | 
|  | * platforms only. | 
|  | */ | 
|  |  | 
|  |  | 
|  | char                 *ngx_freebsd_kern_usrstack; | 
|  | size_t                ngx_thread_stack_size; | 
|  |  | 
|  |  | 
|  | static size_t         rz_size; | 
|  | static size_t         usable_stack_size; | 
|  | static char          *last_stack; | 
|  |  | 
|  | static ngx_uint_t     nthreads; | 
|  | static ngx_uint_t     max_threads; | 
|  |  | 
|  | static ngx_uint_t     nkeys; | 
|  | static ngx_tid_t     *tids;      /* the threads tids array */ | 
|  | void                **ngx_tls;   /* the threads tls's array */ | 
|  |  | 
|  | /* the thread-safe libc errno */ | 
|  |  | 
|  | static int   errno0;   /* the main thread's errno */ | 
|  | static int  *errnos;   /* the threads errno's array */ | 
|  |  | 
|  | int * | 
|  | __error() | 
|  | { | 
|  | int  tid; | 
|  |  | 
|  | tid = ngx_gettid(); | 
|  |  | 
|  | return tid ? &errnos[tid - 1] : &errno0; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * __isthreaded enables the spinlocks in some libc functions, i.e. in malloc() | 
|  | * and some other places.  Nevertheless we protect our malloc()/free() calls | 
|  | * by own mutex that is more efficient than the spinlock. | 
|  | * | 
|  | * _spinlock() is a weak referenced stub in src/lib/libc/gen/_spinlock_stub.c | 
|  | * that does nothing. | 
|  | */ | 
|  |  | 
|  | extern int  __isthreaded; | 
|  |  | 
|  | void | 
|  | _spinlock(ngx_atomic_t *lock) | 
|  | { | 
|  | ngx_int_t  tries; | 
|  |  | 
|  | tries = 0; | 
|  |  | 
|  | for ( ;; ) { | 
|  |  | 
|  | if (*lock) { | 
|  | if (ngx_ncpu > 1 && tries++ < 1000) { | 
|  | continue; | 
|  | } | 
|  |  | 
|  | sched_yield(); | 
|  | tries = 0; | 
|  |  | 
|  | } else { | 
|  | if (ngx_atomic_cmp_set(lock, 0, 1)) { | 
|  | return; | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Before FreeBSD 5.1 _spinunlock() is a simple #define in | 
|  | * src/lib/libc/include/spinlock.h that zeroes lock. | 
|  | * | 
|  | * Since FreeBSD 5.1 _spinunlock() is a weak referenced stub in | 
|  | * src/lib/libc/gen/_spinlock_stub.c that does nothing. | 
|  | */ | 
|  |  | 
|  | #ifndef _spinunlock | 
|  |  | 
|  | void | 
|  | _spinunlock(ngx_atomic_t *lock) | 
|  | { | 
|  | *lock = 0; | 
|  | } | 
|  |  | 
|  | #endif | 
|  |  | 
|  |  | 
|  | ngx_err_t | 
|  | ngx_create_thread(ngx_tid_t *tid, ngx_thread_value_t (*func)(void *arg), | 
|  | void *arg, ngx_log_t *log) | 
|  | { | 
|  | ngx_pid_t   id; | 
|  | ngx_err_t   err; | 
|  | char       *stack, *stack_top; | 
|  |  | 
|  | if (nthreads >= max_threads) { | 
|  | ngx_log_error(NGX_LOG_CRIT, log, 0, | 
|  | "no more than %ui threads can be created", max_threads); | 
|  | return NGX_ERROR; | 
|  | } | 
|  |  | 
|  | last_stack -= ngx_thread_stack_size; | 
|  |  | 
|  | stack = mmap(last_stack, usable_stack_size, PROT_READ|PROT_WRITE, | 
|  | MAP_STACK, -1, 0); | 
|  |  | 
|  | if (stack == MAP_FAILED) { | 
|  | ngx_log_error(NGX_LOG_ALERT, log, ngx_errno, | 
|  | "mmap(%p:%uz, MAP_STACK) thread stack failed", | 
|  | last_stack, usable_stack_size); | 
|  | return NGX_ERROR; | 
|  | } | 
|  |  | 
|  | if (stack != last_stack) { | 
|  | ngx_log_error(NGX_LOG_ALERT, log, 0, | 
|  | "stack %p address was changed to %p", last_stack, stack); | 
|  | return NGX_ERROR; | 
|  | } | 
|  |  | 
|  | stack_top = stack + usable_stack_size; | 
|  |  | 
|  | ngx_log_debug2(NGX_LOG_DEBUG_CORE, log, 0, | 
|  | "thread stack: %p-%p", stack, stack_top); | 
|  |  | 
|  | ngx_set_errno(0); | 
|  |  | 
|  | id = rfork_thread(RFPROC|RFTHREAD|RFMEM, stack_top, | 
|  | (ngx_rfork_thread_func_pt) func, arg); | 
|  |  | 
|  | err = ngx_errno; | 
|  |  | 
|  | if (id == -1) { | 
|  | ngx_log_error(NGX_LOG_ALERT, log, err, "rfork() failed"); | 
|  |  | 
|  | } else { | 
|  | *tid = id; | 
|  | nthreads = (ngx_freebsd_kern_usrstack - stack_top) | 
|  | / ngx_thread_stack_size; | 
|  | tids[nthreads] = id; | 
|  |  | 
|  | ngx_log_debug1(NGX_LOG_DEBUG_CORE, log, 0, "rfork()ed thread: %P", id); | 
|  | } | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  |  | 
|  | ngx_int_t | 
|  | ngx_init_threads(int n, size_t size, ngx_cycle_t *cycle) | 
|  | { | 
|  | char              *red_zone, *zone; | 
|  | size_t             len; | 
|  | ngx_int_t          i; | 
|  | struct sigaction   sa; | 
|  |  | 
|  | max_threads = n + 1; | 
|  |  | 
|  | for (i = 0; i < n; i++) { | 
|  | ngx_memzero(&sa, sizeof(struct sigaction)); | 
|  | sa.sa_handler = SIG_IGN; | 
|  | sigemptyset(&sa.sa_mask); | 
|  | if (sigaction(NGX_CV_SIGNAL, &sa, NULL) == -1) { | 
|  | ngx_log_error(NGX_LOG_ALERT, cycle->log, ngx_errno, | 
|  | "sigaction(%d, SIG_IGN) failed", NGX_CV_SIGNAL); | 
|  | return NGX_ERROR; | 
|  | } | 
|  | } | 
|  |  | 
|  | len = sizeof(ngx_freebsd_kern_usrstack); | 
|  | if (sysctlbyname("kern.usrstack", &ngx_freebsd_kern_usrstack, &len, | 
|  | NULL, 0) == -1) | 
|  | { | 
|  | ngx_log_error(NGX_LOG_ALERT, cycle->log, ngx_errno, | 
|  | "sysctlbyname(kern.usrstack) failed"); | 
|  | return NGX_ERROR; | 
|  | } | 
|  |  | 
|  | /* the main thread stack red zone */ | 
|  | rz_size = ngx_pagesize; | 
|  | red_zone = ngx_freebsd_kern_usrstack - (size + rz_size); | 
|  |  | 
|  | ngx_log_debug2(NGX_LOG_DEBUG_CORE, cycle->log, 0, | 
|  | "usrstack: %p red zone: %p", | 
|  | ngx_freebsd_kern_usrstack, red_zone); | 
|  |  | 
|  | zone = mmap(red_zone, rz_size, PROT_NONE, MAP_ANON, -1, 0); | 
|  | if (zone == MAP_FAILED) { | 
|  | ngx_log_error(NGX_LOG_ALERT, cycle->log, ngx_errno, | 
|  | "mmap(%p:%uz, PROT_NONE, MAP_ANON) red zone failed", | 
|  | red_zone, rz_size); | 
|  | return NGX_ERROR; | 
|  | } | 
|  |  | 
|  | if (zone != red_zone) { | 
|  | ngx_log_error(NGX_LOG_ALERT, cycle->log, 0, | 
|  | "red zone %p address was changed to %p", red_zone, zone); | 
|  | return NGX_ERROR; | 
|  | } | 
|  |  | 
|  | /* create the thread errno' array */ | 
|  |  | 
|  | errnos = ngx_calloc(n * sizeof(int), cycle->log); | 
|  | if (errnos == NULL) { | 
|  | return NGX_ERROR; | 
|  | } | 
|  |  | 
|  | /* create the thread tids array */ | 
|  |  | 
|  | tids = ngx_calloc((n + 1) * sizeof(ngx_tid_t), cycle->log); | 
|  | if (tids == NULL) { | 
|  | return NGX_ERROR; | 
|  | } | 
|  |  | 
|  | tids[0] = ngx_pid; | 
|  |  | 
|  | /* create the thread tls' array */ | 
|  |  | 
|  | ngx_tls = ngx_calloc(NGX_THREAD_KEYS_MAX * (n + 1) * sizeof(void *), | 
|  | cycle->log); | 
|  | if (ngx_tls == NULL) { | 
|  | return NGX_ERROR; | 
|  | } | 
|  |  | 
|  | nthreads = 1; | 
|  |  | 
|  | last_stack = zone + rz_size; | 
|  | usable_stack_size = size; | 
|  | ngx_thread_stack_size = size + rz_size; | 
|  |  | 
|  | /* allow the spinlock in libc malloc() */ | 
|  | __isthreaded = 1; | 
|  |  | 
|  | ngx_threaded = 1; | 
|  |  | 
|  | return NGX_OK; | 
|  | } | 
|  |  | 
|  |  | 
|  | ngx_tid_t | 
|  | ngx_thread_self() | 
|  | { | 
|  | ngx_int_t  tid; | 
|  |  | 
|  | tid = ngx_gettid(); | 
|  |  | 
|  | if (tids == NULL) { | 
|  | return ngx_pid; | 
|  | } | 
|  |  | 
|  | return tids[tid]; | 
|  | } | 
|  |  | 
|  |  | 
|  | ngx_err_t | 
|  | ngx_thread_key_create(ngx_tls_key_t *key) | 
|  | { | 
|  | if (nkeys >= NGX_THREAD_KEYS_MAX) { | 
|  | return NGX_ENOMEM; | 
|  | } | 
|  |  | 
|  | *key = nkeys++; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | ngx_err_t | 
|  | ngx_thread_set_tls(ngx_tls_key_t key, void *value) | 
|  | { | 
|  | if (key >= NGX_THREAD_KEYS_MAX) { | 
|  | return NGX_EINVAL; | 
|  | } | 
|  |  | 
|  | ngx_tls[key * NGX_THREAD_KEYS_MAX + ngx_gettid()] = value; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | ngx_mutex_t * | 
|  | ngx_mutex_init(ngx_log_t *log, ngx_uint_t flags) | 
|  | { | 
|  | ngx_mutex_t  *m; | 
|  | union semun   op; | 
|  |  | 
|  | m = ngx_alloc(sizeof(ngx_mutex_t), log); | 
|  | if (m == NULL) { | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | m->lock = 0; | 
|  | m->log = log; | 
|  |  | 
|  | if (flags & NGX_MUTEX_LIGHT) { | 
|  | m->semid = -1; | 
|  | return m; | 
|  | } | 
|  |  | 
|  | m->semid = semget(IPC_PRIVATE, 1, SEM_R|SEM_A); | 
|  | if (m->semid == -1) { | 
|  | ngx_log_error(NGX_LOG_ALERT, log, ngx_errno, "semget() failed"); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | op.val = 0; | 
|  |  | 
|  | if (semctl(m->semid, 0, SETVAL, op) == -1) { | 
|  | ngx_log_error(NGX_LOG_ALERT, log, ngx_errno, "semctl(SETVAL) failed"); | 
|  |  | 
|  | if (semctl(m->semid, 0, IPC_RMID) == -1) { | 
|  | ngx_log_error(NGX_LOG_ALERT, log, ngx_errno, | 
|  | "semctl(IPC_RMID) failed"); | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | return m; | 
|  | } | 
|  |  | 
|  |  | 
|  | void | 
|  | ngx_mutex_destroy(ngx_mutex_t *m) | 
|  | { | 
|  | if (semctl(m->semid, 0, IPC_RMID) == -1) { | 
|  | ngx_log_error(NGX_LOG_ALERT, m->log, ngx_errno, | 
|  | "semctl(IPC_RMID) failed"); | 
|  | } | 
|  |  | 
|  | ngx_free((void *) m); | 
|  | } | 
|  |  | 
|  |  | 
|  | ngx_int_t | 
|  | ngx_mutex_dolock(ngx_mutex_t *m, ngx_int_t try) | 
|  | { | 
|  | uint32_t       lock, old; | 
|  | ngx_uint_t     tries; | 
|  | struct sembuf  op; | 
|  |  | 
|  | if (!ngx_threaded) { | 
|  | return NGX_OK; | 
|  | } | 
|  |  | 
|  | #if (NGX_DEBUG) | 
|  | if (try) { | 
|  | ngx_log_debug2(NGX_LOG_DEBUG_MUTEX, m->log, 0, | 
|  | "try lock mutex %p lock:%XD", m, m->lock); | 
|  | } else { | 
|  | ngx_log_debug2(NGX_LOG_DEBUG_MUTEX, m->log, 0, | 
|  | "lock mutex %p lock:%XD", m, m->lock); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | old = m->lock; | 
|  | tries = 0; | 
|  |  | 
|  | for ( ;; ) { | 
|  | if (old & NGX_MUTEX_LOCK_BUSY) { | 
|  |  | 
|  | if (try) { | 
|  | return NGX_AGAIN; | 
|  | } | 
|  |  | 
|  | if (ngx_ncpu > 1 && tries++ < 1000) { | 
|  |  | 
|  | /* the spinlock is used only on the SMP system */ | 
|  |  | 
|  | old = m->lock; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (m->semid == -1) { | 
|  | sched_yield(); | 
|  |  | 
|  | tries = 0; | 
|  | old = m->lock; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | ngx_log_debug2(NGX_LOG_DEBUG_MUTEX, m->log, 0, | 
|  | "mutex %p lock:%XD", m, m->lock); | 
|  |  | 
|  | /* | 
|  | * The mutex is locked so we increase a number | 
|  | * of the threads that are waiting on the mutex | 
|  | */ | 
|  |  | 
|  | lock = old + 1; | 
|  |  | 
|  | if ((lock & ~NGX_MUTEX_LOCK_BUSY) > nthreads) { | 
|  | ngx_log_error(NGX_LOG_ALERT, m->log, ngx_errno, | 
|  | "%D threads wait for mutex %p, " | 
|  | "while only %ui threads are available", | 
|  | lock & ~NGX_MUTEX_LOCK_BUSY, m, nthreads); | 
|  | ngx_abort(); | 
|  | } | 
|  |  | 
|  | if (ngx_atomic_cmp_set(&m->lock, old, lock)) { | 
|  |  | 
|  | ngx_log_debug2(NGX_LOG_DEBUG_MUTEX, m->log, 0, | 
|  | "wait mutex %p lock:%XD", m, m->lock); | 
|  |  | 
|  | /* | 
|  | * The number of the waiting threads has been increased | 
|  | * and we would wait on the SysV semaphore. | 
|  | * A semaphore should wake up us more efficiently than | 
|  | * a simple sched_yield() or usleep(). | 
|  | */ | 
|  |  | 
|  | op.sem_num = 0; | 
|  | op.sem_op = -1; | 
|  | op.sem_flg = 0; | 
|  |  | 
|  | if (semop(m->semid, &op, 1) == -1) { | 
|  | ngx_log_error(NGX_LOG_ALERT, m->log, ngx_errno, | 
|  | "semop() failed while waiting on mutex %p", m); | 
|  | ngx_abort(); | 
|  | } | 
|  |  | 
|  | ngx_log_debug2(NGX_LOG_DEBUG_MUTEX, m->log, 0, | 
|  | "mutex waked up %p lock:%XD", m, m->lock); | 
|  |  | 
|  | tries = 0; | 
|  | old = m->lock; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | old = m->lock; | 
|  |  | 
|  | } else { | 
|  | lock = old | NGX_MUTEX_LOCK_BUSY; | 
|  |  | 
|  | if (ngx_atomic_cmp_set(&m->lock, old, lock)) { | 
|  |  | 
|  | /* we locked the mutex */ | 
|  |  | 
|  | break; | 
|  | } | 
|  |  | 
|  | old = m->lock; | 
|  | } | 
|  |  | 
|  | if (tries++ > 1000) { | 
|  |  | 
|  | ngx_log_debug1(NGX_LOG_DEBUG_MUTEX, m->log, 0, | 
|  | "mutex %p is contested", m); | 
|  |  | 
|  | /* the mutex is probably contested so we are giving up now */ | 
|  |  | 
|  | sched_yield(); | 
|  |  | 
|  | tries = 0; | 
|  | old = m->lock; | 
|  | } | 
|  | } | 
|  |  | 
|  | ngx_log_debug2(NGX_LOG_DEBUG_MUTEX, m->log, 0, | 
|  | "mutex %p is locked, lock:%XD", m, m->lock); | 
|  |  | 
|  | return NGX_OK; | 
|  | } | 
|  |  | 
|  |  | 
|  | void | 
|  | ngx_mutex_unlock(ngx_mutex_t *m) | 
|  | { | 
|  | uint32_t       lock, old; | 
|  | struct sembuf  op; | 
|  |  | 
|  | if (!ngx_threaded) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | old = m->lock; | 
|  |  | 
|  | if (!(old & NGX_MUTEX_LOCK_BUSY)) { | 
|  | ngx_log_error(NGX_LOG_ALERT, m->log, 0, | 
|  | "trying to unlock the free mutex %p", m); | 
|  | ngx_abort(); | 
|  | } | 
|  |  | 
|  | /* free the mutex */ | 
|  |  | 
|  | #if 0 | 
|  | ngx_log_debug2(NGX_LOG_DEBUG_MUTEX, m->log, 0, | 
|  | "unlock mutex %p lock:%XD", m, old); | 
|  | #endif | 
|  |  | 
|  | for ( ;; ) { | 
|  | lock = old & ~NGX_MUTEX_LOCK_BUSY; | 
|  |  | 
|  | if (ngx_atomic_cmp_set(&m->lock, old, lock)) { | 
|  | break; | 
|  | } | 
|  |  | 
|  | old = m->lock; | 
|  | } | 
|  |  | 
|  | if (m->semid == -1) { | 
|  | ngx_log_debug1(NGX_LOG_DEBUG_MUTEX, m->log, 0, | 
|  | "mutex %p is unlocked", m); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* check whether we need to wake up a waiting thread */ | 
|  |  | 
|  | old = m->lock; | 
|  |  | 
|  | for ( ;; ) { | 
|  | if (old & NGX_MUTEX_LOCK_BUSY) { | 
|  |  | 
|  | /* the mutex is just locked by another thread */ | 
|  |  | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (old == 0) { | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* there are the waiting threads */ | 
|  |  | 
|  | lock = old - 1; | 
|  |  | 
|  | if (ngx_atomic_cmp_set(&m->lock, old, lock)) { | 
|  |  | 
|  | /* wake up the thread that waits on semaphore */ | 
|  |  | 
|  | ngx_log_debug1(NGX_LOG_DEBUG_MUTEX, m->log, 0, | 
|  | "wake up mutex %p", m); | 
|  |  | 
|  | op.sem_num = 0; | 
|  | op.sem_op = 1; | 
|  | op.sem_flg = 0; | 
|  |  | 
|  | if (semop(m->semid, &op, 1) == -1) { | 
|  | ngx_log_error(NGX_LOG_ALERT, m->log, ngx_errno, | 
|  | "semop() failed while waking up on mutex %p", m); | 
|  | ngx_abort(); | 
|  | } | 
|  |  | 
|  | break; | 
|  | } | 
|  |  | 
|  | old = m->lock; | 
|  | } | 
|  |  | 
|  | ngx_log_debug1(NGX_LOG_DEBUG_MUTEX, m->log, 0, | 
|  | "mutex %p is unlocked", m); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  |  | 
|  | ngx_cond_t * | 
|  | ngx_cond_init(ngx_log_t *log) | 
|  | { | 
|  | ngx_cond_t  *cv; | 
|  |  | 
|  | cv = ngx_alloc(sizeof(ngx_cond_t), log); | 
|  | if (cv == NULL) { | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | cv->signo = NGX_CV_SIGNAL; | 
|  | cv->tid = -1; | 
|  | cv->log = log; | 
|  | cv->kq = -1; | 
|  |  | 
|  | return cv; | 
|  | } | 
|  |  | 
|  |  | 
|  | void | 
|  | ngx_cond_destroy(ngx_cond_t *cv) | 
|  | { | 
|  | if (close(cv->kq) == -1) { | 
|  | ngx_log_error(NGX_LOG_ALERT, cv->log, ngx_errno, | 
|  | "kqueue close() failed"); | 
|  | } | 
|  |  | 
|  | ngx_free(cv); | 
|  | } | 
|  |  | 
|  |  | 
|  | ngx_int_t | 
|  | ngx_cond_wait(ngx_cond_t *cv, ngx_mutex_t *m) | 
|  | { | 
|  | int              n; | 
|  | ngx_err_t        err; | 
|  | struct kevent    kev; | 
|  | struct timespec  ts; | 
|  |  | 
|  | if (cv->kq == -1) { | 
|  |  | 
|  | /* | 
|  | * We have to add the EVFILT_SIGNAL filter in the rfork()ed thread. | 
|  | * Otherwise the thread would not get a signal event. | 
|  | * | 
|  | * However, we have not to open the kqueue in the thread, | 
|  | * it is simply handy do it together. | 
|  | */ | 
|  |  | 
|  | cv->kq = kqueue(); | 
|  | if (cv->kq == -1) { | 
|  | ngx_log_error(NGX_LOG_ALERT, cv->log, ngx_errno, "kqueue() failed"); | 
|  | return NGX_ERROR; | 
|  | } | 
|  |  | 
|  | ngx_log_debug2(NGX_LOG_DEBUG_CORE, cv->log, 0, | 
|  | "cv kq:%d signo:%d", cv->kq, cv->signo); | 
|  |  | 
|  | kev.ident = cv->signo; | 
|  | kev.filter = EVFILT_SIGNAL; | 
|  | kev.flags = EV_ADD; | 
|  | kev.fflags = 0; | 
|  | kev.data = 0; | 
|  | kev.udata = NULL; | 
|  |  | 
|  | ts.tv_sec = 0; | 
|  | ts.tv_nsec = 0; | 
|  |  | 
|  | if (kevent(cv->kq, &kev, 1, NULL, 0, &ts) == -1) { | 
|  | ngx_log_error(NGX_LOG_ALERT, cv->log, ngx_errno, "kevent() failed"); | 
|  | return NGX_ERROR; | 
|  | } | 
|  |  | 
|  | cv->tid = ngx_thread_self(); | 
|  | } | 
|  |  | 
|  | ngx_mutex_unlock(m); | 
|  |  | 
|  | ngx_log_debug3(NGX_LOG_DEBUG_CORE, cv->log, 0, | 
|  | "cv %p wait, kq:%d, signo:%d", cv, cv->kq, cv->signo); | 
|  |  | 
|  | for ( ;; ) { | 
|  | n = kevent(cv->kq, NULL, 0, &kev, 1, NULL); | 
|  |  | 
|  | ngx_log_debug2(NGX_LOG_DEBUG_CORE, cv->log, 0, | 
|  | "cv %p kevent: %d", cv, n); | 
|  |  | 
|  | if (n == -1) { | 
|  | err = ngx_errno; | 
|  | ngx_log_error((err == NGX_EINTR) ? NGX_LOG_INFO : NGX_LOG_ALERT, | 
|  | cv->log, ngx_errno, | 
|  | "kevent() failed while waiting condition variable %p", | 
|  | cv); | 
|  |  | 
|  | if (err == NGX_EINTR) { | 
|  | break; | 
|  | } | 
|  |  | 
|  | return NGX_ERROR; | 
|  | } | 
|  |  | 
|  | if (n == 0) { | 
|  | ngx_log_error(NGX_LOG_ALERT, cv->log, 0, | 
|  | "kevent() returned no events " | 
|  | "while waiting condition variable %p", | 
|  | cv); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (kev.filter != EVFILT_SIGNAL) { | 
|  | ngx_log_error(NGX_LOG_ALERT, cv->log, 0, | 
|  | "kevent() returned unexpected events: %d " | 
|  | "while waiting condition variable %p", | 
|  | kev.filter, cv); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (kev.ident != (uintptr_t) cv->signo) { | 
|  | ngx_log_error(NGX_LOG_ALERT, cv->log, 0, | 
|  | "kevent() returned unexpected signal: %d ", | 
|  | "while waiting condition variable %p", | 
|  | kev.ident, cv); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | break; | 
|  | } | 
|  |  | 
|  | ngx_log_debug1(NGX_LOG_DEBUG_CORE, cv->log, 0, "cv %p is waked up", cv); | 
|  |  | 
|  | ngx_mutex_lock(m); | 
|  |  | 
|  | return NGX_OK; | 
|  | } | 
|  |  | 
|  |  | 
|  | ngx_int_t | 
|  | ngx_cond_signal(ngx_cond_t *cv) | 
|  | { | 
|  | ngx_err_t  err; | 
|  |  | 
|  | ngx_log_debug3(NGX_LOG_DEBUG_CORE, cv->log, 0, | 
|  | "cv %p to signal %P %d", | 
|  | cv, cv->tid, cv->signo); | 
|  |  | 
|  | if (cv->tid == -1) { | 
|  | return NGX_OK; | 
|  | } | 
|  |  | 
|  | if (kill(cv->tid, cv->signo) == -1) { | 
|  |  | 
|  | err = ngx_errno; | 
|  |  | 
|  | ngx_log_error(NGX_LOG_ALERT, cv->log, err, | 
|  | "kill() failed while signaling condition variable %p", cv); | 
|  |  | 
|  | if (err == NGX_ESRCH) { | 
|  | cv->tid = -1; | 
|  | } | 
|  |  | 
|  | return NGX_ERROR; | 
|  | } | 
|  |  | 
|  | ngx_log_debug1(NGX_LOG_DEBUG_CORE, cv->log, 0, "cv %p is signaled", cv); | 
|  |  | 
|  | return NGX_OK; | 
|  | } |