rpm: refactored to build base nginx and modules separately.
diff --git a/rpm/SOURCES/njs-0.1.2.tar.gz b/rpm/SOURCES/njs-0.1.2.tar.gz deleted file mode 100644 index cc6ade5..0000000 --- a/rpm/SOURCES/njs-0.1.2.tar.gz +++ /dev/null Binary files differ
diff --git a/rpm/SOURCES/njs-0.1.3.tar.gz b/rpm/SOURCES/njs-0.1.3.tar.gz new file mode 100644 index 0000000..7978c47 --- /dev/null +++ b/rpm/SOURCES/njs-0.1.3.tar.gz Binary files differ
diff --git a/rpm/SPECS/Makefile b/rpm/SPECS/Makefile new file mode 100644 index 0000000..230b557 --- /dev/null +++ b/rpm/SPECS/Makefile
@@ -0,0 +1,393 @@ +SHELL= /bin/bash + +BASE_VERSION= 1.11.5 +BASE_RELEASE= 1 +BASE_SRC= nginx-$(BASE_VERSION).tar.gz +SRCPATH?= ../SOURCES + +MODULES= geoip image-filter njs perl xslt + +MODULE_SUMMARY_geoip= GeoIP dynamic modules +MODULE_SUMMARY_image_filter= image filter dynamic module +MODULE_SUMMARY_njs= nginScript dynamic modules +MODULE_SUMMARY_perl= Perl dynamic module +MODULE_SUMMARY_xslt= xslt dynamic module + +MODULE_VERSION_geoip= $(BASE_VERSION) +MODULE_RELEASE_geoip= 1 +MODULE_VERSION_image_filter= $(BASE_VERSION) +MODULE_RELEASE_image_filter= 1 +MODULE_VERSION_njs= 0.1.3 +MODULE_RELEASE_njs= 1 +MODULE_VERSION_perl= $(BASE_VERSION) +MODULE_RELEASE_perl= 1 +MODULE_VERSION_xslt= $(BASE_VERSION) +MODULE_RELEASE_xslt= 1 + +MODULE_SOURCES_njs= njs-$(MODULE_VERSION_njs).tar.gz + +MODULE_CONFARGS_geoip= --with-http_geoip_module=dynamic \ + --with-stream_geoip_module=dynamic +MODULE_CONFARGS_image_filter= --with-http_image_filter_module=dynamic +MODULE_CONFARGS_njs= --add-dynamic-module=njs-$(MODULE_VERSION_njs)/nginx +MODULE_CONFARGS_perl= --with-http_perl_module=dynamic +MODULE_CONFARGS_xslt= --with-http_xslt_module=dynamic + +# geoip + +define MODULE_DEFINITIONS_geoip +%if 0%{?suse_version} == 1315 +BuildRequires: libGeoIP-devel +Requires: libGeoIP1 +%else +BuildRequires: GeoIP-devel +Requires: GeoIP +%endif +endef +export MODULE_DEFINITIONS_geoip + +define MODULE_POST_geoip +cat <<BANNER +---------------------------------------------------------------------- + +The $(MODULE_SUMMARY_geoip) for nginx have been installed. +To enable these modules, add the following to /etc/nginx/nginx.conf +and reload nginx: + + load_module modules/ngx_http_geoip_module.so; + load_module modules/ngx_stream_geoip_module.so; + +Please refer to the modules documentation for further details: +http://nginx.org/en/docs/http/ngx_http_geoip_module.html +http://nginx.org/en/docs/stream/ngx_stream_geoip_module.html + +---------------------------------------------------------------------- +BANNER +endef +export MODULE_POST_geoip + +# image-filter + +define MODULE_DEFINITIONS_image_filter +BuildRequires: gd-devel +Requires: gd +endef +export MODULE_DEFINITIONS_image_filter + +define MODULE_POST_image_filter +cat <<BANNER +---------------------------------------------------------------------- + +The $(MODULE_SUMMARY_image_filter) for nginx has been installed. +To enable this module, add the following to /etc/nginx/nginx.conf +and reload nginx: + + load_module modules/ngx_http_image_filter_module.so; + +Please refer to the module documentation for further details: +http://nginx.org/en/docs/http/ngx_http_image_filter_module.html + +---------------------------------------------------------------------- +BANNER +endef +export MODULE_POST_image_filter + +# njs + +MODULE_VERSION_PREFIX_njs=$(BASE_VERSION). + +define MODULE_PREINSTALL_njs +%{__install} -m644 %{bdir}/njs-$(MODULE_VERSION_njs)/README \ + $$RPM_BUILD_ROOT%{_datadir}/doc/nginx-module-njs/ +endef +export MODULE_PREINSTALL_njs + +define MODULE_POST_njs +cat <<BANNER +---------------------------------------------------------------------- + +The $(MODULE_SUMMARY_njs) for nginx have been installed. +To enable these modules, add the following to /etc/nginx/nginx.conf +and reload nginx: + + load_module modules/ngx_http_js_module.so; + load_module modules/ngx_stream_js_module.so; + +Please refer to the modules documentation for further details: +/usr/share/doc/nginx-module-njs/README +https://www.nginx.com/resources/wiki/nginScript/ + +---------------------------------------------------------------------- +BANNER +endef +export MODULE_POST_njs + +# perl + +define MODULE_DEFINITIONS_perl +%if (0%{?rhel} \&\& 0%{?rhel} == 5) || (0%{?suse_version} == 1315) +BuildRequires: perl +%else +BuildRequires: perl-devel +BuildRequires: perl-ExtUtils-Embed +%endif +Requires: perl(:MODULE_COMPAT_%(eval "`%{__perl} -V:version`"; echo $$version)) +endef +export MODULE_DEFINITIONS_perl + +define MODULE_PREINSTALL_perl +%{__make} DESTDIR=$$RPM_BUILD_ROOT INSTALLDIRS=vendor -f objs/Makefile install_perl_modules +find %{buildroot} -type f -name .packlist -exec rm -f '{}' \\; +find %{buildroot} -type f -name perllocal.pod -exec rm -f '{}' \\; +find %{buildroot} -type f -empty -exec rm -f '{}' \\; +find %{buildroot} -type f -iname '*.so' -exec chmod 0755 '{}' \\; +endef +export MODULE_PREINSTALL_perl + +define MODULE_FILES_perl +%dir %{perl_vendorarch}/auto/nginx +%{perl_vendorarch}/nginx.pm +%{perl_vendorarch}/auto/nginx/nginx.so +%{perl_vendorarch}/auto/nginx/nginx-debug.so +%{_mandir}/man3/nginx.3pm* +endef +export MODULE_FILES_perl + +define MODULE_POST_perl +cat <<BANNER +---------------------------------------------------------------------- + +The $(MODULE_SUMMARY_perl) for nginx has been installed. +To enable this module, add the following to /etc/nginx/nginx.conf +and reload nginx: + + load_module modules/ngx_http_perl_module.so; + +Please refer to the module documentation for further details: +http://nginx.org/en/docs/http/ngx_http_perl_module.html + +---------------------------------------------------------------------- +BANNER +endef +export MODULE_POST_perl + +# xslt + +define MODULE_DEFINITIONS_xslt +BuildRequires: libxslt-devel +Requires: libxslt +endef +export MODULE_DEFINITIONS_xslt + +define MODULE_POST_xslt +cat <<BANNER +---------------------------------------------------------------------- + +The $(MODULE_SUMMARY_xslt) for nginx has been installed. +To enable this module, add the following to /etc/nginx/nginx.conf +and reload nginx: + + load_module modules/ngx_http_xslt_filter_module.so; + +Please refer to the module documentation for further details: +http://nginx.org/en/docs/http/ngx_http_xslt_module.html + +---------------------------------------------------------------------- +BANNER +endef +export MODULE_POST_xslt + + +BASE_CONFIGURE_ARGS=\ + --prefix=%{_sysconfdir}/nginx \ + --sbin-path=%{_sbindir}/nginx \ + --modules-path=%{_libdir}/nginx/modules \ + --conf-path=%{_sysconfdir}/nginx/nginx.conf \ + --error-log-path=%{_localstatedir}/log/nginx/error.log \ + --http-log-path=%{_localstatedir}/log/nginx/access.log \ + --pid-path=%{_localstatedir}/run/nginx.pid \ + --lock-path=%{_localstatedir}/run/nginx.lock \ + --http-client-body-temp-path=%{_localstatedir}/cache/nginx/client_temp \ + --http-proxy-temp-path=%{_localstatedir}/cache/nginx/proxy_temp \ + --http-fastcgi-temp-path=%{_localstatedir}/cache/nginx/fastcgi_temp \ + --http-uwsgi-temp-path=%{_localstatedir}/cache/nginx/uwsgi_temp \ + --http-scgi-temp-path=%{_localstatedir}/cache/nginx/scgi_temp \ + --user=%{nginx_user} \ + --group=%{nginx_group} \ + --with-compat \ + --with-file-aio \ + --with-threads \ + --with-http_addition_module \ + --with-http_auth_request_module \ + --with-http_dav_module \ + --with-http_flv_module \ + --with-http_gunzip_module \ + --with-http_gzip_static_module \ + --with-http_mp4_module \ + --with-http_random_index_module \ + --with-http_realip_module \ + --with-http_secure_link_module \ + --with-http_slice_module \ + --with-http_ssl_module \ + --with-http_stub_status_module \ + --with-http_sub_module \ + --with-http_v2_module \ + --with-mail \ + --with-mail_ssl_module \ + --with-stream \ + --with-stream_realip_module \ + --with-stream_ssl_module \ + --with-stream_ssl_preread_module + +export CR=\\n + +modname = $(shell echo $1 | cut -c 14- | cut -d '.' -f 1 | tr '-' '_') + +default: + @echo "valid targets: all base $(addprefix module-, $(MODULES)) test test-debug" + +all: base modules + @echo "===> all done" + +modules: $(addprefix module-, $(MODULES)) + +specs: nginx.spec $(addsuffix .spec, $(addprefix nginx-module-, $(MODULES))) + +$(SRCPATH)/$(BASE_SRC): + @cd $(SRCPATH) && wget http://nginx.org/download/$(BASE_SRC) + +base: nginx.spec $(SRCPATH)/$(BASE_SRC) + @echo "===> Building base package" + @$(SHELL) -c "time -p rpmbuild -ba nginx.spec" + @ln -s ../BUILD/nginx-$(BASE_VERSION)/objs base + +nginx.spec: + @echo "===> Creating $@" + @{ \ + set -e ; \ + cat nginx.spec.in | sed \ + -e 's#%%MAIN_VERSION%%#$(BASE_VERSION)#g' \ + -e 's#%%MAIN_RELEASE%%#$(BASE_RELEASE)#g' \ + -e 's#%%BASE_CONFIGURE_ARGS%%#$(BASE_CONFIGURE_ARGS)#g' \ + > nginx.spec ; \ + } + +module-%: nginx-module-%.spec $(SRCPATH)/$(BASE_SRC) + @echo "===> Building nginx-$@ package" ; \ + $(SHELL) -c "time -p rpmbuild -ba nginx-$@.spec" ; \ + ln -s ../BUILD/nginx-$@-$(BASE_VERSION)/objs $@ + +nginx-module-%.spec: + @echo "===> Creating $@" + @{ \ + set -e ; \ + i=100 ; \ + sources= ; \ + prepsources= ; \ + for src in $(MODULE_SOURCES_$(call modname, $@)); do \ + s="`printf "Source%d: %s\n" $${i} $${src}`" ; \ + sources="$${sources}\n$${s}" ; \ + s="`printf "tar zxf %%{SOURCE%d\}" $${i}`" ; \ + prepsources="$${prepsources}\n$${s}" ; \ + i=$$(($${i}+1)) ; \ + done ; \ + i=100 ; \ + patches= ; \ + preppatches= ; \ + for src in $(MODULE_PATCHES_$(call modname, $@)); do \ + s="`printf "Patch%d: %s\n" $${i} $${src}`" ; \ + patches="$${patches}\n$${s}" ; \ + s="`printf "%%patch%d -p1" $${i}`" ; \ + preppatches="$${preppatches}\n$${s}" ; \ + i=$$(($${i}+1)) ; \ + done ; \ + module_copyright=`echo $@ | sed -e "s#.spec#.copyright#"` ; \ + if [ -f ../SOURCES/$${module_copyright} ]; then \ + copyright_source=$${module_copyright} ; \ + else \ + copyright_source=COPYRIGHT ; \ + fi ; \ + module_changelog=`echo $@ | sed -e "s#.spec#.changelog.in#"` ; \ + if [ -f $${module_changelog} ]; then \ + changelog_file=$${module_changelog} ; \ + else \ + changelog_file=nginx-module.changelog.in ; \ + fi ; \ + definitions=`echo "$$MODULE_DEFINITIONS_$(call modname, $@)" | sed -e ':a' -e 'N' -e '$$!ba' -e "s/\n/\$$CR/g"` ; \ + prebuild=`echo "$$MODULE_PREBUILD_$(call modname, $@)" | sed -e ':a' -e 'N' -e '$$!ba' -e "s/\n/\$$CR/g"` ; \ + preinstall=`echo "$$MODULE_PREINSTALL_$(call modname, $@)" | sed -e ':a' -e 'N' -e '$$!ba' -e "s/\n/\$$CR/g"` ; \ + files=`echo "$$MODULE_FILES_$(call modname, $@)" | sed -e ':a' -e 'N' -e '$$!ba' -e "s/\n/\$$CR/g"` ; \ + post=`echo "$$MODULE_POST_$(call modname, $@)" | sed -e ':a' -e 'N' -e '$$!ba' -e "s/\n/\$$CR/g"` ; \ + cat nginx-module.spec.in | sed \ + -e "s#%%NAME%%#$(shell echo $@ | cut -d '.' -f 1)#g" \ + -e "s#%%SUMMARY%%#nginx $(MODULE_SUMMARY_$(call modname, $@))#g" \ + -e "s#%%SHORT_SUMMARY%%#$(MODULE_SUMMARY_$(call modname, $@))#g" \ + -e "s#%%MAIN_VERSION%%#$(BASE_VERSION)#g" \ + -e "s#%%MAIN_RELEASE%%#$(BASE_RELEASE)#g" \ + -e "s#%%VERSION_PREFIX%%#$(MODULE_VERSION_PREFIX_$(call modname, $@))#g" \ + -e "s#%%VERSION%%#$(MODULE_VERSION_$(call modname, $@))#g" \ + -e "s#%%RELEASE%%#$(MODULE_RELEASE_$(call modname, $@))#g" \ + -e "s#%%BASE_CONFIGURE_ARGS%%#$(BASE_CONFIGURE_ARGS)#g" \ + -e "s#%%MODULE_CONFIGURE_ARGS%%#$(MODULE_CONFARGS_$(call modname, $@))#g" \ + -e "s#%%COPYRIGHT_SOURCE%%#$${copyright_source}#g" \ + -e "s#%%MODULE_SOURCES%%#$${sources}#g" \ + -e "s#%%MODULE_PATCHES%%#$${patches}#g" \ + -e "s#%%MODULE_PREP_SOURCES%%#$${prepsources}#g" \ + -e "s#%%MODULE_PREP_PATCHES%%#$${preppatches}#g" \ + -e "s#%%MODULE_DEFINITIONS%%#$${definitions}#g" \ + -e "s#%%MODULE_PREBUILD%%#$${prebuild}#g" \ + -e "s#%%MODULE_PREINSTALL%%#$${preinstall}#g" \ + -e "s#%%MODULE_FILES%%#$${files}#g" \ + -e "s#%%MODULE_POST%%#$${post}#g" \ + > $@.tmp && \ + cat $${changelog_file} | grep -v "^#" >> $@.tmp && \ + mv $@.tmp $@ ; \ + } + +nginx-tests: + @{ \ + if [ -d "../nginx-tests" ]; then \ + echo "===> Copying tests from ../nginx-tests" ; \ + cp -rP ../nginx-tests nginx-tests ; \ + else \ + echo "===> Cloning tests" ; \ + hg clone http://hg.nginx.org/nginx-tests ; \ + fi ; \ + } + +test: base nginx-tests + @echo "===> Running tests with regular binary/modules" + @{ \ + pwd=`pwd` ; \ + globals= ; \ + for so in `find module-*/ -maxdepth 1 -type f -name "*module.so"`; do \ + globals="$$globals load_module $$pwd/$$so;" ; \ + done ; \ + if [ -d $$pwd/module-perl ]; then \ + globals="$$globals env PERL5LIB=$$pwd/module-perl/src/http/modules/perl:$$pwd/module-perl/src/http/modules/perl/blib/arch;" ; \ + fi ; \ + cd nginx-tests && TEST_NGINX_BINARY=$$pwd/base/nginx TEST_NGINX_GLOBALS="$$globals" prove . ; \ + } + +test-debug: base nginx-tests + @echo "===> Running tests with debug binary/modules" + @{ \ + pwd=`pwd` ; \ + globals= ; \ + for so in `find module-*/ -maxdepth 1 -type f -name "*module-debug.so"`; do \ + globals="$$globals load_module $$pwd/$$so;" ; \ + done ; \ + if [ -d $$pwd/module-perl ]; then \ + globals="$$globals env PERL5LIB=$$pwd/module-perl/src/http/modules/perl:$$pwd/module-perl/src/http/modules/perl/blib/arch;" ; \ + fi ; \ + cd nginx-tests && TEST_NGINX_BINARY=$$pwd/base/nginx-debug TEST_NGINX_GLOBALS="$$globals" prove . ; \ + } + +clean: + @rm -f base module-* + @rm -f nginx.spec nginx-module-*.spec + @rm -rf nginx-tests + +.PHONY: default all modules specs test test-debug clean + +.SECONDARY:
diff --git a/rpm/SPECS/nginx-module-njs.changelog.in b/rpm/SPECS/nginx-module-njs.changelog.in new file mode 100644 index 0000000..2980cb5 --- /dev/null +++ b/rpm/SPECS/nginx-module-njs.changelog.in
@@ -0,0 +1,3 @@ +* Mon Oct 10 2016 Andrei Belov <defan@nginx.com> +- base version updated to 1.11.5 +- njs module updated to 0.1.3
diff --git a/rpm/SPECS/nginx-module.changelog.in b/rpm/SPECS/nginx-module.changelog.in new file mode 100644 index 0000000..e1c787a --- /dev/null +++ b/rpm/SPECS/nginx-module.changelog.in
@@ -0,0 +1,4 @@ +# default changelog for module packages +# +* Mon Oct 10 2016 Andrei Belov <defan@nginx.com> +- base version updated to 1.11.5
diff --git a/rpm/SPECS/nginx-module.spec.in b/rpm/SPECS/nginx-module.spec.in new file mode 100644 index 0000000..b6a278d --- /dev/null +++ b/rpm/SPECS/nginx-module.spec.in
@@ -0,0 +1,111 @@ +# +%define nginx_user nginx +%define nginx_group nginx + +%%MODULE_DEFINITIONS%% + +%if 0%{?rhel} || 0%{?amzn} +%define _group System Environment/Daemons +BuildRequires: openssl-devel +%endif + +%if 0%{?suse_version} == 1315 +%define _group Productivity/Networking/Web/Servers +BuildRequires: libopenssl-devel +%endif + +%if 0%{?rhel} == 7 +%define epoch 1 +Epoch: %{epoch} +%endif + +%define main_version %%MAIN_VERSION%% +%define main_release %%MAIN_RELEASE%%%{?dist}.ngx + +%define bdir %{_builddir}/%{name}-%{main_version} + +Summary: %%SUMMARY%% +Name: %%NAME%% +Version: %%VERSION_PREFIX%%%%VERSION%% +Release: %%RELEASE%%%{?dist}.ngx +Vendor: Nginx, Inc. +URL: http://nginx.org/ +Group: %{_group} + +Source0: http://nginx.org/download/nginx-%{main_version}.tar.gz +Source1: %%COPYRIGHT_SOURCE%% +%%MODULE_SOURCES%% + +%%MODULE_PATCHES%% + +License: 2-clause BSD-like license + +BuildRoot: %{_tmppath}/%{name}-%{main_version}-%{main_release}-root +BuildRequires: zlib-devel +BuildRequires: pcre-devel +Requires: nginx == %{?epoch:%{epoch}:}%%MAIN_VERSION%%-%%MAIN_RELEASE%%%{?dist}.ngx + +%description +nginx %%SHORT_SUMMARY%%. + +%if 0%{?suse_version} || 0%{?amzn} +%debug_package +%endif + +%define WITH_CC_OPT $(echo %{optflags} $(pcre-config --cflags)) + +%define BASE_CONFIGURE_ARGS $(echo "%%BASE_CONFIGURE_ARGS%%") +%define MODULE_CONFIGURE_ARGS $(echo "%%MODULE_CONFIGURE_ARGS%%") + +%prep +%setup -qcTn %{name}-%{main_version} +tar --strip-components=1 -zxf %{SOURCE0} +%%MODULE_PREP_SOURCES%% +%%MODULE_PREP_PATCHES%% + +%build +%%MODULE_PREBUILD%% +cd %{bdir} +./configure %{BASE_CONFIGURE_ARGS} %{MODULE_CONFIGURE_ARGS} \ + --with-cc-opt="%{WITH_CC_OPT}" \ + --with-debug +make %{?_smp_mflags} modules +for so in `find %{bdir}/objs/ -type f -name "*.so"`; do +debugso=`echo $so | sed -e "s|.so|-debug.so|"` +mv $so $debugso +done +./configure %{BASE_CONFIGURE_ARGS} %{MODULE_CONFIGURE_ARGS} \ + --with-cc-opt="%{WITH_CC_OPT}" +make %{?_smp_mflags} modules + +%install +cd %{bdir} +%{__rm} -rf $RPM_BUILD_ROOT +%{__mkdir} -p $RPM_BUILD_ROOT%{_datadir}/doc/%%NAME%% +%{__install} -m 644 -p %{SOURCE1} \ + $RPM_BUILD_ROOT%{_datadir}/doc/%%NAME%%/ + +%%MODULE_PREINSTALL%% + +%{__mkdir} -p $RPM_BUILD_ROOT%{_libdir}/nginx/modules +for so in `find %{bdir}/objs/ -maxdepth 1 -type f -name "*.so"`; do +%{__install} -m755 $so \ + $RPM_BUILD_ROOT%{_libdir}/nginx/modules/ +done + +%clean +%{__rm} -rf $RPM_BUILD_ROOT + +%files +%defattr(-,root,root) +%{_libdir}/nginx/modules/* +%dir %{_datadir}/doc/%%NAME%% +%{_datadir}/doc/%%NAME%%/* +%%MODULE_FILES%% + +%post +if [ $1 -eq 1 ]; then +%%MODULE_POST%% +fi + +%changelog
diff --git a/rpm/SPECS/nginx.spec b/rpm/SPECS/nginx.spec deleted file mode 100644 index b61fbe3..0000000 --- a/rpm/SPECS/nginx.spec +++ /dev/null
@@ -1,823 +0,0 @@ -# -%define nginx_home %{_localstatedir}/cache/nginx -%define nginx_user nginx -%define nginx_group nginx -%define nginx_loggroup adm - -# distribution specific definitions -%define use_systemd (0%{?fedora} && 0%{?fedora} >= 18) || (0%{?rhel} && 0%{?rhel} >= 7) || (0%{?suse_version} == 1315) - -%if 0%{?rhel} == 5 -%define _group System Environment/Daemons -Requires(pre): shadow-utils -Requires: initscripts >= 8.36 -Requires(post): chkconfig -Requires: openssl -BuildRequires: openssl-devel -BuildRequires: perl -BuildRequires: GeoIP-devel -%endif - -%if 0%{?rhel} == 6 -%define _group System Environment/Daemons -%define with_http2 1 -Requires(pre): shadow-utils -Requires: initscripts >= 8.36 -Requires(post): chkconfig -Requires: openssl >= 1.0.1 -BuildRequires: openssl-devel >= 1.0.1 -BuildRequires: perl-devel -BuildRequires: perl-ExtUtils-Embed -BuildRequires: GeoIP-devel -%endif - -%if 0%{?rhel} == 7 -%define _group System Environment/Daemons -%define epoch 1 -%define with_http2 1 -Epoch: %{epoch} -Requires(pre): shadow-utils -Requires: systemd -Requires: openssl >= 1.0.1 -BuildRequires: systemd -BuildRequires: openssl-devel >= 1.0.1 -BuildRequires: perl-devel -BuildRequires: perl-ExtUtils-Embed -BuildRequires: GeoIP-devel -%endif - -%if 0%{?suse_version} == 1315 -%define _group Productivity/Networking/Web/Servers -%define with_http2 1 -%define nginx_loggroup trusted -Requires(pre): shadow -Requires: systemd -BuildRequires: libopenssl-devel -BuildRequires: systemd -BuildRequires: perl -BuildRequires: libGeoIP-devel -%endif - -# end of distribution specific definitions - -%define main_version 1.11.4 -%define main_release 1%{?dist}.ngx -%define njs_version 0.1.2 -%define module_xslt_version %{main_version} -%define module_xslt_release 1%{?dist}.ngx -%define module_geoip_version %{main_version} -%define module_geoip_release 1%{?dist}.ngx -%define module_image_filter_version %{main_version} -%define module_image_filter_release 1%{?dist}.ngx -%define module_perl_version %{main_version} -%define module_perl_release 1%{?dist}.ngx -%define module_njs_version %{main_version}.%{njs_version} -%define module_njs_release 1%{?dist}.ngx - -%define bdir %{_builddir}/%{name}-%{main_version} - -%define WITH_CC_OPT $(echo %{optflags} $(pcre-config --cflags)) - -%define COMMON_CONFIGURE_ARGS $(echo "\ - --prefix=%{_sysconfdir}/nginx \ - --sbin-path=%{_sbindir}/nginx \ - --modules-path=%{_libdir}/nginx/modules \ - --conf-path=%{_sysconfdir}/nginx/nginx.conf \ - --error-log-path=%{_localstatedir}/log/nginx/error.log \ - --http-log-path=%{_localstatedir}/log/nginx/access.log \ - --pid-path=%{_localstatedir}/run/nginx.pid \ - --lock-path=%{_localstatedir}/run/nginx.lock \ - --http-client-body-temp-path=%{_localstatedir}/cache/nginx/client_temp \ - --http-proxy-temp-path=%{_localstatedir}/cache/nginx/proxy_temp \ - --http-fastcgi-temp-path=%{_localstatedir}/cache/nginx/fastcgi_temp \ - --http-uwsgi-temp-path=%{_localstatedir}/cache/nginx/uwsgi_temp \ - --http-scgi-temp-path=%{_localstatedir}/cache/nginx/scgi_temp \ - --user=%{nginx_user} \ - --group=%{nginx_group} \ - --with-http_ssl_module \ - --with-http_realip_module \ - --with-http_addition_module \ - --with-http_sub_module \ - --with-http_dav_module \ - --with-http_flv_module \ - --with-http_mp4_module \ - --with-http_gunzip_module \ - --with-http_gzip_static_module \ - --with-http_random_index_module \ - --with-http_secure_link_module \ - --with-http_stub_status_module \ - --with-http_auth_request_module \ - --with-http_xslt_module=dynamic \ - --with-http_image_filter_module=dynamic \ - --with-http_geoip_module=dynamic \ - --with-http_perl_module=dynamic \ - --add-dynamic-module=njs-%{njs_version}/nginx \ - --with-threads \ - --with-stream \ - --with-stream_ssl_module \ - --with-stream_ssl_preread_module \ - --with-stream_realip_module \ - --with-stream_geoip_module=dynamic \ - --with-http_slice_module \ - --with-mail \ - --with-mail_ssl_module \ - --with-file-aio \ - --with-ipv6 \ - %{?with_http2:--with-http_v2_module}") - -Summary: High performance web server -Name: nginx -Version: %{main_version} -Release: %{main_release} -Vendor: Nginx, Inc. -URL: http://nginx.org/ -Group: %{_group} - -Source0: http://nginx.org/download/%{name}-%{version}.tar.gz -Source1: logrotate -Source2: nginx.init.in -Source3: nginx.sysconf -Source4: nginx.conf -Source5: nginx.vh.default.conf -Source7: nginx-debug.sysconf -Source8: nginx.service -Source9: nginx.upgrade.sh -Source10: nginx.suse.logrotate -Source11: nginx-debug.service -Source12: COPYRIGHT -Source13: njs-%{njs_version}.tar.gz - -License: 2-clause BSD-like license - -BuildRoot: %{_tmppath}/%{name}-%{main_version}-%{main_release}-root -BuildRequires: zlib-devel -BuildRequires: pcre-devel -BuildRequires: libxslt-devel -BuildRequires: gd-devel - -Provides: webserver - -%description -nginx [engine x] is an HTTP and reverse proxy server, as well as -a mail proxy server. - -%if 0%{?suse_version} == 1315 -%debug_package -%endif - -%package module-xslt -Version: %{module_xslt_version} -Release: %{module_xslt_release} -Group: %{_group} -Requires: nginx = %{?epoch:%{epoch}:}%{main_version}-%{main_release} -Summary: nginx xslt module -%description module-xslt -Dynamic xslt module for nginx. - -%package module-image-filter -Version: %{module_image_filter_version} -Release: %{module_image_filter_release} -Group: %{_group} -Requires: nginx = %{?epoch:%{epoch}:}%{main_version}-%{main_release} -Summary: nginx image filter module -%description module-image-filter -Dynamic image filter module for nginx. - -%package module-geoip -Version: %{module_geoip_version} -Release: %{module_geoip_release} -Group: %{_group} -Requires: nginx = %{?epoch:%{epoch}:}%{main_version}-%{main_release} -Summary: nginx geoip modules -%description module-geoip -Dynamic geoip modules for nginx. - -%package module-perl -Version: %{module_perl_version} -Release: %{module_perl_release} -Group: %{_group} -Requires: nginx = %{?epoch:%{epoch}:}%{main_version}-%{main_release} -Requires: perl(:MODULE_COMPAT_%(eval "`%{__perl} -V:version`"; echo $version)) -Summary: nginx perl module -%description module-perl -Dynamic perl module for nginx. - -%package module-njs -Version: %{module_njs_version} -Release: %{module_njs_release} -Group: %{_group} -Requires: nginx = %{?epoch:%{epoch}:}%{main_version}-%{main_release} -Summary: nginx nJScript module -%description module-njs -Dynamic nJScript module for nginx. - -%prep -%setup -q -tar xvzf %SOURCE13 -cp %{SOURCE2} . -sed -e 's|%%DEFAULTSTART%%|2 3 4 5|g' -e 's|%%DEFAULTSTOP%%|0 1 6|g' \ - -e 's|%%PROVIDES%%|nginx|g' < %{SOURCE2} > nginx.init -sed -e 's|%%DEFAULTSTART%%||g' -e 's|%%DEFAULTSTOP%%|0 1 2 3 4 5 6|g' \ - -e 's|%%PROVIDES%%|nginx-debug|g' < %{SOURCE2} > nginx-debug.init - -%build -./configure %{COMMON_CONFIGURE_ARGS} \ - --with-cc-opt="%{WITH_CC_OPT}" \ - --with-debug -make %{?_smp_mflags} -%{__mv} %{bdir}/objs/nginx \ - %{bdir}/objs/nginx-debug -%{__mv} %{bdir}/objs/ngx_http_xslt_filter_module.so \ - %{bdir}/objs/ngx_http_xslt_filter_module-debug.so -%{__mv} %{bdir}/objs/ngx_http_image_filter_module.so \ - %{bdir}/objs/ngx_http_image_filter_module-debug.so -%{__mv} %{bdir}/objs/ngx_http_geoip_module.so \ - %{bdir}/objs/ngx_http_geoip_module-debug.so -%{__mv} %{bdir}/objs/ngx_http_perl_module.so \ - %{bdir}/objs/ngx_http_perl_module-debug.so -%{__mv} %{bdir}/objs/src/http/modules/perl/blib/arch/auto/nginx/nginx.so \ - %{bdir}/objs/src/http/modules/perl/blib/arch/auto/nginx/nginx-debug.so -%{__mv} %{bdir}/objs/ngx_http_js_module.so \ - %{bdir}/objs/ngx_http_js_module-debug.so -%{__mv} %{bdir}/objs/ngx_stream_js_module.so \ - %{bdir}/objs/ngx_stream_js_module-debug.so -%{__mv} %{bdir}/objs/ngx_stream_geoip_module.so \ - %{bdir}/objs/ngx_stream_geoip_module-debug.so -./configure %{COMMON_CONFIGURE_ARGS} \ - --with-cc-opt="%{WITH_CC_OPT}" -make %{?_smp_mflags} - -%install -%{__rm} -rf $RPM_BUILD_ROOT -%{__make} DESTDIR=$RPM_BUILD_ROOT INSTALLDIRS=vendor install - -find %{buildroot} -type f -name .packlist -exec rm -f '{}' \; -find %{buildroot} -type f -name perllocal.pod -exec rm -f '{}' \; -find %{buildroot} -type f -empty -exec rm -f '{}' \; -find %{buildroot} -type f -name nginx.so -exec chmod u+w '{}' \; - -%{__mkdir} -p $RPM_BUILD_ROOT%{_datadir}/nginx -%{__mv} $RPM_BUILD_ROOT%{_sysconfdir}/nginx/html $RPM_BUILD_ROOT%{_datadir}/nginx/ - -%{__rm} -f $RPM_BUILD_ROOT%{_sysconfdir}/nginx/*.default -%{__rm} -f $RPM_BUILD_ROOT%{_sysconfdir}/nginx/fastcgi.conf - -%{__mkdir} -p $RPM_BUILD_ROOT%{_localstatedir}/log/nginx -%{__mkdir} -p $RPM_BUILD_ROOT%{_localstatedir}/run/nginx -%{__mkdir} -p $RPM_BUILD_ROOT%{_localstatedir}/cache/nginx - -%{__mkdir} -p $RPM_BUILD_ROOT%{_libdir}/nginx/modules -cd $RPM_BUILD_ROOT%{_sysconfdir}/nginx && \ - %{__ln_s} ../..%{_libdir}/nginx/modules modules && cd - - -%{__mkdir} -p $RPM_BUILD_ROOT%{_datadir}/doc/%{name}-%{main_version} -%{__install} -m 644 -p %{SOURCE12} \ - $RPM_BUILD_ROOT%{_datadir}/doc/%{name}-%{main_version}/ - -%{__mkdir} -p $RPM_BUILD_ROOT%{_sysconfdir}/nginx/conf.d -%{__rm} $RPM_BUILD_ROOT%{_sysconfdir}/nginx/nginx.conf -%{__install} -m 644 -p %{SOURCE4} \ - $RPM_BUILD_ROOT%{_sysconfdir}/nginx/nginx.conf -%{__install} -m 644 -p %{SOURCE5} \ - $RPM_BUILD_ROOT%{_sysconfdir}/nginx/conf.d/default.conf - -%{__mkdir} -p $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig -%{__install} -m 644 -p %{SOURCE3} \ - $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/nginx -%{__install} -m 644 -p %{SOURCE7} \ - $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/nginx-debug - -%if %{use_systemd} -# install systemd-specific files -%{__mkdir} -p $RPM_BUILD_ROOT%{_unitdir} -%{__install} -m644 %SOURCE8 \ - $RPM_BUILD_ROOT%{_unitdir}/nginx.service -%{__install} -m644 %SOURCE11 \ - $RPM_BUILD_ROOT%{_unitdir}/nginx-debug.service -%{__mkdir} -p $RPM_BUILD_ROOT%{_libexecdir}/initscripts/legacy-actions/nginx -%{__install} -m755 %SOURCE9 \ - $RPM_BUILD_ROOT%{_libexecdir}/initscripts/legacy-actions/nginx/upgrade -%else -# install SYSV init stuff -%{__mkdir} -p $RPM_BUILD_ROOT%{_initrddir} -%{__install} -m755 nginx.init $RPM_BUILD_ROOT%{_initrddir}/nginx -%{__install} -m755 nginx-debug.init $RPM_BUILD_ROOT%{_initrddir}/nginx-debug -%endif - -# install log rotation stuff -%{__mkdir} -p $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d -%if 0%{?suse_version} -%{__install} -m 644 -p %{SOURCE10} \ - $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/nginx -%else -%{__install} -m 644 -p %{SOURCE1} \ - $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/nginx -%endif - -%{__install} -m755 %{bdir}/objs/nginx-debug \ - $RPM_BUILD_ROOT%{_sbindir}/nginx-debug - -%{__install} -m644 %{bdir}/objs/ngx_http_xslt_filter_module-debug.so \ - $RPM_BUILD_ROOT%{_libdir}/nginx/modules/ngx_http_xslt_filter_module-debug.so -%{__install} -m644 %{bdir}/objs/ngx_http_image_filter_module-debug.so \ - $RPM_BUILD_ROOT%{_libdir}/nginx/modules/ngx_http_image_filter_module-debug.so -%{__install} -m644 %{bdir}/objs/ngx_http_geoip_module-debug.so \ - $RPM_BUILD_ROOT%{_libdir}/nginx/modules/ngx_http_geoip_module-debug.so -%{__install} -m644 %{bdir}/objs/ngx_http_perl_module-debug.so \ - $RPM_BUILD_ROOT%{_libdir}/nginx/modules/ngx_http_perl_module-debug.so -%{__mkdir} -p $RPM_BUILD_ROOT%{perl_vendorarch}/auto/nginx -%{__install} -m644 %{bdir}/objs/src/http/modules/perl/blib/arch/auto/nginx/nginx-debug.so \ - $RPM_BUILD_ROOT%{perl_vendorarch}/auto/nginx/nginx-debug.so -%{__install} -m644 %{bdir}/objs/ngx_http_js_module-debug.so \ - $RPM_BUILD_ROOT%{_libdir}/nginx/modules/ngx_http_js_module-debug.so -%{__install} -m644 %{bdir}/objs/ngx_stream_js_module-debug.so \ - $RPM_BUILD_ROOT%{_libdir}/nginx/modules/ngx_stream_js_module-debug.so -%{__install} -m644 %{bdir}/objs/ngx_stream_geoip_module-debug.so \ - $RPM_BUILD_ROOT%{_libdir}/nginx/modules/ngx_stream_geoip_module-debug.so - -%clean -%{__rm} -rf $RPM_BUILD_ROOT - -%files -%defattr(-,root,root) - -%{_sbindir}/nginx -%{_sbindir}/nginx-debug - -%dir %{_sysconfdir}/nginx -%dir %{_sysconfdir}/nginx/conf.d -%{_sysconfdir}/nginx/modules - -%config(noreplace) %{_sysconfdir}/nginx/nginx.conf -%config(noreplace) %{_sysconfdir}/nginx/conf.d/default.conf -%config(noreplace) %{_sysconfdir}/nginx/mime.types -%config(noreplace) %{_sysconfdir}/nginx/fastcgi_params -%config(noreplace) %{_sysconfdir}/nginx/scgi_params -%config(noreplace) %{_sysconfdir}/nginx/uwsgi_params -%config(noreplace) %{_sysconfdir}/nginx/koi-utf -%config(noreplace) %{_sysconfdir}/nginx/koi-win -%config(noreplace) %{_sysconfdir}/nginx/win-utf - -%config(noreplace) %{_sysconfdir}/logrotate.d/nginx -%config(noreplace) %{_sysconfdir}/sysconfig/nginx -%config(noreplace) %{_sysconfdir}/sysconfig/nginx-debug -%if %{use_systemd} -%{_unitdir}/nginx.service -%{_unitdir}/nginx-debug.service -%dir %{_libexecdir}/initscripts/legacy-actions/nginx -%{_libexecdir}/initscripts/legacy-actions/nginx/* -%else -%{_initrddir}/nginx -%{_initrddir}/nginx-debug -%endif - -%attr(0755,root,root) %dir %{_libdir}/nginx -%attr(0755,root,root) %dir %{_libdir}/nginx/modules -%dir %{_datadir}/nginx -%dir %{_datadir}/nginx/html -%{_datadir}/nginx/html/* - -%attr(0755,root,root) %dir %{_localstatedir}/cache/nginx -%attr(0755,root,root) %dir %{_localstatedir}/log/nginx - -%dir %{_datadir}/doc/%{name}-%{main_version} -%doc %{_datadir}/doc/%{name}-%{main_version}/COPYRIGHT - -%files module-xslt -%attr(0644,root,root) %{_libdir}/nginx/modules/ngx_http_xslt_filter_module.so -%attr(0644,root,root) %{_libdir}/nginx/modules/ngx_http_xslt_filter_module-debug.so - -%files module-image-filter -%attr(0644,root,root) %{_libdir}/nginx/modules/ngx_http_image_filter_module.so -%attr(0644,root,root) %{_libdir}/nginx/modules/ngx_http_image_filter_module-debug.so - -%files module-geoip -%attr(0644,root,root) %{_libdir}/nginx/modules/ngx_http_geoip_module.so -%attr(0644,root,root) %{_libdir}/nginx/modules/ngx_http_geoip_module-debug.so -%attr(0644,root,root) %{_libdir}/nginx/modules/ngx_stream_geoip_module.so -%attr(0644,root,root) %{_libdir}/nginx/modules/ngx_stream_geoip_module-debug.so - -%files module-perl -%attr(0644,root,root) %{_libdir}/nginx/modules/ngx_http_perl_module.so -%attr(0644,root,root) %{_libdir}/nginx/modules/ngx_http_perl_module-debug.so -%dir %{perl_vendorarch}/auto/nginx -%{perl_vendorarch}/nginx.pm -%{perl_vendorarch}/auto/nginx/nginx.so -%{perl_vendorarch}/auto/nginx/nginx-debug.so -%{_mandir}/man3/nginx.3pm* - -%files module-njs -%attr(0644,root,root) %{_libdir}/nginx/modules/ngx_http_js_module.so -%attr(0644,root,root) %{_libdir}/nginx/modules/ngx_http_js_module-debug.so -%attr(0644,root,root) %{_libdir}/nginx/modules/ngx_stream_js_module.so -%attr(0644,root,root) %{_libdir}/nginx/modules/ngx_stream_js_module-debug.so - -%pre -# Add the "nginx" user -getent group %{nginx_group} >/dev/null || groupadd -r %{nginx_group} -getent passwd %{nginx_user} >/dev/null || \ - useradd -r -g %{nginx_group} -s /sbin/nologin \ - -d %{nginx_home} -c "nginx user" %{nginx_user} -exit 0 - -%post -# Register the nginx service -if [ $1 -eq 1 ]; then -%if %{use_systemd} - /usr/bin/systemctl preset nginx.service >/dev/null 2>&1 ||: - /usr/bin/systemctl preset nginx-debug.service >/dev/null 2>&1 ||: -%else - /sbin/chkconfig --add nginx - /sbin/chkconfig --add nginx-debug -%endif - # print site info - cat <<BANNER ----------------------------------------------------------------------- - -Thanks for using nginx! - -Please find the official documentation for nginx here: -* http://nginx.org/en/docs/ - -Commercial subscriptions for nginx are available on: -* http://nginx.com/products/ - ----------------------------------------------------------------------- -BANNER - - # Touch and set permisions on default log files on installation - - if [ -d %{_localstatedir}/log/nginx ]; then - if [ ! -e %{_localstatedir}/log/nginx/access.log ]; then - touch %{_localstatedir}/log/nginx/access.log - %{__chmod} 640 %{_localstatedir}/log/nginx/access.log - %{__chown} nginx:%{nginx_loggroup} %{_localstatedir}/log/nginx/access.log - fi - - if [ ! -e %{_localstatedir}/log/nginx/error.log ]; then - touch %{_localstatedir}/log/nginx/error.log - %{__chmod} 640 %{_localstatedir}/log/nginx/error.log - %{__chown} nginx:%{nginx_loggroup} %{_localstatedir}/log/nginx/error.log - fi - fi -fi - -%post module-xslt -if [ $1 -eq 1 ]; then - cat <<BANNER ----------------------------------------------------------------------- - -The XSLT dynamic module for nginx has been installed. -To enable this module, add the following to /etc/nginx/nginx.conf -and reload nginx: - - load_module modules/ngx_http_xslt_filter_module.so; - -Please refer to the module documentation for further details: -http://nginx.org/en/docs/http/ngx_http_xslt_module.html - ----------------------------------------------------------------------- -BANNER -fi - -%post module-geoip -if [ $1 -eq 1 ]; then - cat <<BANNER ----------------------------------------------------------------------- - -The GeoIP dynamic modules for nginx have been installed. -To enable those modules, add the following to /etc/nginx/nginx.conf -and reload nginx: - - load_module modules/ngx_http_geoip_module.so; - load_module modules/ngx_stream_geoip_module.so; - -Please refer to the modules documentation for further details: -http://nginx.org/en/docs/http/ngx_http_geoip_module.html -http://nginx.org/en/docs/stream/ngx_stream_geoip_module.html - ----------------------------------------------------------------------- -BANNER -fi - -%post module-image-filter -if [ $1 -eq 1 ]; then - cat <<BANNER ----------------------------------------------------------------------- - -The image filter dynamic module for nginx has been installed. -To enable this module, add the following to /etc/nginx/nginx.conf -and reload nginx: - - load_module modules/ngx_http_image_filter_module.so; - -Please refer to the module documentation for further details: -http://nginx.org/en/docs/http/ngx_http_image_filter_module.html - ----------------------------------------------------------------------- -BANNER -fi - -%post module-perl -if [ $1 -eq 1 ]; then - cat <<BANNER ----------------------------------------------------------------------- - -The perl dynamic module for nginx has been installed. -To enable this module, add the following to /etc/nginx/nginx.conf -and reload nginx: - - load_module modules/ngx_http_perl_module.so; - -Please refer to the module documentation for further details: -http://nginx.org/en/docs/http/ngx_http_perl_module.html - ----------------------------------------------------------------------- -BANNER -fi - -%post module-njs -if [ $1 -eq 1 ]; then - cat <<BANNER ----------------------------------------------------------------------- - -The nJScript dynamic modules for nginx have been installed. -To enable those modules, add the following to /etc/nginx/nginx.conf -and reload nginx: - - load_module modules/ngx_http_js_module.so; - load_module modules/ngx_stream_js_module.so; - -Please refer to the modules documentation for further details: -https://www.nginx.com/resources/wiki/nginScript/ - ----------------------------------------------------------------------- -BANNER -fi - -%preun -if [ $1 -eq 0 ]; then -%if %use_systemd - /usr/bin/systemctl --no-reload disable nginx.service >/dev/null 2>&1 ||: - /usr/bin/systemctl stop nginx.service >/dev/null 2>&1 ||: -%else - /sbin/service nginx stop > /dev/null 2>&1 - /sbin/chkconfig --del nginx - /sbin/chkconfig --del nginx-debug -%endif -fi - -%postun -%if %use_systemd -/usr/bin/systemctl daemon-reload >/dev/null 2>&1 ||: -%endif -if [ $1 -ge 1 ]; then - /sbin/service nginx status >/dev/null 2>&1 || exit 0 - /sbin/service nginx upgrade >/dev/null 2>&1 || echo \ - "Binary upgrade failed, please check nginx's error.log" -fi - -%changelog -* Tue Sep 13 2016 Konstantin Pavlov <thresh@nginx.com> -- 1.11.4. -- njs updated to 0.1.2. - -* Tue Jul 26 2016 Konstantin Pavlov <thresh@nginx.com> -- 1.11.3. -- njs updated to 0.1.0. -- njs stream dynamic module added to nginx-module-njs package. -- geoip stream dynamic module added to nginx-module-geoip package. - -* Tue Jul 5 2016 Konstantin Pavlov <thresh@nginx.com> -- 1.11.2 -- njs updated to ef2b708510b1. - -* Tue May 31 2016 Konstantin Pavlov <thresh@nginx.com> -- 1.11.1 - -* Wed May 24 2016 Sergey Budnevitch <sb@nginx.com> -- Fixed logrotate error if nginx is not running -- 1.11.0 - -* Tue Apr 19 2016 Konstantin Pavlov <thresh@nginx.com> -- 1.9.15 -- njs updated to 1c50334fbea6. - -* Tue Apr 5 2016 Konstantin Pavlov <thresh@nginx.com> -- 1.9.14 - -* Tue Mar 29 2016 Konstantin Pavlov <thresh@nginx.com> -- 1.9.13 -- Added perl and nJScript dynamic modules -- Fixed Requires section for dynamic modules on CentOS7/RHEL7 - -* Wed Feb 24 2016 Sergey Budnevitch <sb@nginx.com> -- common configure args are now in macros -- xslt, image-filter and geoip dynamic modules added -- 1.9.12 - -* Tue Feb 9 2016 Sergey Budnevitch <sb@nginx.com> -- dynamic modules path and symlink in %{_sysconfdir}/nginx added -- 1.9.11 - -* Tue Jan 26 2016 Konstantin Pavlov <thresh@nginx.com> -- 1.9.10 - -* Wed Dec 9 2015 Konstantin Pavlov <thresh@nginx.com> -- 1.9.9 - -* Tue Dec 8 2015 Konstantin Pavlov <thresh@nginx.com> -- 1.9.8 -- http_slice module enabled - -* Tue Nov 17 2015 Konstantin Pavlov <thresh@nginx.com> -- 1.9.7 - -* Tue Oct 27 2015 Sergey Budnevitch <sb@nginx.com> -- 1.9.6 - -* Tue Sep 22 2015 Andrei Belov <defan@nginx.com> -- 1.9.5 -- http_spdy module replaced with http_v2 module - -* Tue Aug 18 2015 Konstantin Pavlov <thresh@nginx.com> -- 1.9.4 - -* Tue Jul 14 2015 Sergey Budnevitch <sb@nginx.com> -- 1.9.3 - -* Tue May 26 2015 Sergey Budnevitch <sb@nginx.com> -- 1.9.1 - -* Tue Apr 28 2015 Sergey Budnevitch <sb@nginx.com> -- 1.9.0 -- thread pool support added -- stream module added -- example_ssl.conf removed - -* Tue Apr 7 2015 Sergey Budnevitch <sb@nginx.com> -- 1.7.12 - -* Tue Mar 24 2015 Sergey Budnevitch <sb@nginx.com> -- 1.7.11 - -* Tue Feb 10 2015 Sergey Budnevitch <sb@nginx.com> -- 1.7.10 - -* Tue Dec 23 2014 Sergey Budnevitch <sb@nginx.com> -- 1.7.9 - -* Tue Dec 2 2014 Sergey Budnevitch <sb@nginx.com> -- 1.7.8 - -* Tue Sep 30 2014 Sergey Budnevitch <sb@nginx.com> -- 1.7.6 - -* Tue Sep 16 2014 Sergey Budnevitch <sb@nginx.com> -- epoch added to the EPEL7/CentOS7 spec to override EPEL one -- 1.7.5 - -* Tue Aug 5 2014 Sergey Budnevitch <sb@nginx.com> -- 1.7.4 - -* Tue Jul 8 2014 Sergey Budnevitch <sb@nginx.com> -- 1.7.3 - -* Tue Jun 17 2014 Sergey Budnevitch <sb@nginx.com> -- 1.7.2 - -* Tue May 27 2014 Sergey Budnevitch <sb@nginx.com> -- 1.7.1 -- incorrect sysconfig filename finding in the initscript fixed - -* Thu Apr 24 2014 Konstantin Pavlov <thresh@nginx.com> -- 1.7.0 - -* Tue Apr 8 2014 Sergey Budnevitch <sb@nginx.com> -- 1.5.13 -- built spdy module on rhel/centos 6 - -* Tue Mar 18 2014 Sergey Budnevitch <sb@nginx.com> -- 1.5.12 -- spec cleanup -- openssl version dependence added -- upgrade() function in the init script improved -- warning added when binary upgrade returns non-zero exit code - -* Tue Mar 4 2014 Sergey Budnevitch <sb@nginx.com> -- 1.5.11 - -* Tue Feb 4 2014 Sergey Budnevitch <sb@nginx.com> -- 1.5.10 - -* Wed Jan 22 2014 Sergey Budnevitch <sb@nginx.com> -- 1.5.9 - -* Tue Dec 17 2013 Sergey Budnevitch <sb@nginx.com> -- 1.5.8 -- fixed invalid week days in the changelog - -* Tue Nov 19 2013 Sergey Budnevitch <sb@nginx.com> -- 1.5.7 - -* Tue Oct 1 2013 Sergey Budnevitch <sb@nginx.com> -- 1.5.6 - -* Tue Sep 17 2013 Andrei Belov <defan@nginx.com> -- 1.5.5 - -* Tue Aug 27 2013 Sergey Budnevitch <sb@nginx.com> -- 1.5.4 -- auth request module added - -* Tue Jul 30 2013 Sergey Budnevitch <sb@nginx.com> -- 1.5.3 - -* Tue Jul 2 2013 Sergey Budnevitch <sb@nginx.com> -- 1.5.2 - -* Tue Jun 4 2013 Sergey Budnevitch <sb@nginx.com> -- 1.5.1 - -* Mon May 6 2013 Sergey Budnevitch <sb@nginx.com> -- 1.5.0 - -* Tue Apr 16 2013 Sergey Budnevitch <sb@nginx.com> -- 1.3.16 - -* Tue Mar 26 2013 Sergey Budnevitch <sb@nginx.com> -- 1.3.15 -- gunzip module added -- set permissions on default log files at installation - -* Tue Feb 12 2013 Sergey Budnevitch <sb@nginx.com> -- excess slash removed from --prefix -- 1.2.7 - -* Tue Dec 11 2012 Sergey Budnevitch <sb@nginx.com> -- 1.2.6 - -* Tue Nov 13 2012 Sergey Budnevitch <sb@nginx.com> -- 1.2.5 - -* Tue Sep 25 2012 Sergey Budnevitch <sb@nginx.com> -- 1.2.4 - -* Tue Aug 7 2012 Sergey Budnevitch <sb@nginx.com> -- 1.2.3 -- nginx-debug package now actually contains non stripped binary - -* Tue Jul 3 2012 Sergey Budnevitch <sb@nginx.com> -- 1.2.2 - -* Tue Jun 5 2012 Sergey Budnevitch <sb@nginx.com> -- 1.2.1 - -* Mon Apr 23 2012 Sergey Budnevitch <sb@nginx.com> -- 1.2.0 - -* Thu Apr 12 2012 Sergey Budnevitch <sb@nginx.com> -- 1.0.15 - -* Thu Mar 15 2012 Sergey Budnevitch <sb@nginx.com> -- 1.0.14 -- OpenSUSE init script and SuSE specific changes to spec file added - -* Mon Mar 5 2012 Sergey Budnevitch <sb@nginx.com> -- 1.0.13 - -* Mon Feb 6 2012 Sergey Budnevitch <sb@nginx.com> -- 1.0.12 -- banner added to install script - -* Thu Dec 15 2011 Sergey Budnevitch <sb@nginx.com> -- 1.0.11 -- init script enhancements (thanks to Gena Makhomed) -- one second sleep during upgrade replaced with 0.1 sec usleep - -* Tue Nov 15 2011 Sergey Budnevitch <sb@nginx.com> -- 1.0.10 - -* Tue Nov 1 2011 Sergey Budnevitch <sb@nginx.com> -- 1.0.9 -- nginx-debug package added - -* Tue Oct 11 2011 Sergey Budnevitch <sb@nginx.com> -- spec file cleanup (thanks to Yury V. Zaytsev) -- log dir permitions fixed -- logrotate creates new logfiles with nginx owner -- "upgrade" argument to init-script added (based on fedora one) - -* Sat Oct 1 2011 Sergey Budnevitch <sb@nginx.com> -- 1.0.8 -- built with mp4 module - -* Fri Sep 30 2011 Sergey Budnevitch <sb@nginx.com> -- 1.0.7 - -* Tue Aug 30 2011 Sergey Budnevitch <sb@nginx.com> -- 1.0.6 -- replace "conf.d/*" config include with "conf.d/*.conf" in default nginx.conf - -* Wed Aug 10 2011 Sergey Budnevitch -- Initial release
diff --git a/rpm/SPECS/nginx.spec.in b/rpm/SPECS/nginx.spec.in new file mode 100644 index 0000000..9629d01 --- /dev/null +++ b/rpm/SPECS/nginx.spec.in
@@ -0,0 +1,550 @@ +# +%define nginx_home %{_localstatedir}/cache/nginx +%define nginx_user nginx +%define nginx_group nginx +%define nginx_loggroup adm + +# distribution specific definitions +%define use_systemd (0%{?fedora} && 0%{?fedora} >= 18) || (0%{?rhel} && 0%{?rhel} >= 7) || (0%{?suse_version} == 1315) + +%if 0%{?rhel} == 5 +%define _group System Environment/Daemons +Requires(pre): shadow-utils +Requires: initscripts >= 8.36 +Requires(post): chkconfig +Requires: openssl +BuildRequires: openssl-devel +%endif + +%if 0%{?rhel} == 6 +%define _group System Environment/Daemons +Requires(pre): shadow-utils +Requires: initscripts >= 8.36 +Requires(post): chkconfig +Requires: openssl >= 1.0.1 +BuildRequires: openssl-devel >= 1.0.1 +%endif + +%if 0%{?rhel} == 7 +%define _group System Environment/Daemons +%define epoch 1 +Epoch: %{epoch} +Requires(pre): shadow-utils +Requires: systemd +Requires: openssl >= 1.0.1 +BuildRequires: systemd +BuildRequires: openssl-devel >= 1.0.1 +%endif + +%if 0%{?suse_version} == 1315 +%define _group Productivity/Networking/Web/Servers +%define nginx_loggroup trusted +Requires(pre): shadow +Requires: systemd +BuildRequires: libopenssl-devel +BuildRequires: systemd +%endif + +# end of distribution specific definitions + +%define main_version %%MAIN_VERSION%% +%define main_release %%MAIN_RELEASE%%%{?dist}.ngx + +%define bdir %{_builddir}/%{name}-%{main_version} + +%define WITH_CC_OPT $(echo %{optflags} $(pcre-config --cflags)) + +%define BASE_CONFIGURE_ARGS $(echo "%%BASE_CONFIGURE_ARGS%%") + +Summary: High performance web server +Name: nginx +Version: %{main_version} +Release: %{main_release} +Vendor: Nginx, Inc. +URL: http://nginx.org/ +Group: %{_group} + +Source0: http://nginx.org/download/%{name}-%{version}.tar.gz +Source1: logrotate +Source2: nginx.init.in +Source3: nginx.sysconf +Source4: nginx.conf +Source5: nginx.vh.default.conf +Source7: nginx-debug.sysconf +Source8: nginx.service +Source9: nginx.upgrade.sh +Source10: nginx.suse.logrotate +Source11: nginx-debug.service +Source12: COPYRIGHT + +License: 2-clause BSD-like license + +BuildRoot: %{_tmppath}/%{name}-%{main_version}-%{main_release}-root +BuildRequires: zlib-devel +BuildRequires: pcre-devel + +Provides: webserver + +%description +nginx [engine x] is an HTTP and reverse proxy server, as well as +a mail proxy server. + +%if 0%{?suse_version} == 1315 +%debug_package +%endif + +%prep +%setup -q +cp %{SOURCE2} . +sed -e 's|%%DEFAULTSTART%%|2 3 4 5|g' -e 's|%%DEFAULTSTOP%%|0 1 6|g' \ + -e 's|%%PROVIDES%%|nginx|g' < %{SOURCE2} > nginx.init +sed -e 's|%%DEFAULTSTART%%||g' -e 's|%%DEFAULTSTOP%%|0 1 2 3 4 5 6|g' \ + -e 's|%%PROVIDES%%|nginx-debug|g' < %{SOURCE2} > nginx-debug.init + +%build +./configure %{BASE_CONFIGURE_ARGS} \ + --with-cc-opt="%{WITH_CC_OPT}" \ + --with-debug +make %{?_smp_mflags} +%{__mv} %{bdir}/objs/nginx \ + %{bdir}/objs/nginx-debug +./configure %{BASE_CONFIGURE_ARGS} \ + --with-cc-opt="%{WITH_CC_OPT}" +make %{?_smp_mflags} + +%install +%{__rm} -rf $RPM_BUILD_ROOT +%{__make} DESTDIR=$RPM_BUILD_ROOT INSTALLDIRS=vendor install + +%{__mkdir} -p $RPM_BUILD_ROOT%{_datadir}/nginx +%{__mv} $RPM_BUILD_ROOT%{_sysconfdir}/nginx/html $RPM_BUILD_ROOT%{_datadir}/nginx/ + +%{__rm} -f $RPM_BUILD_ROOT%{_sysconfdir}/nginx/*.default +%{__rm} -f $RPM_BUILD_ROOT%{_sysconfdir}/nginx/fastcgi.conf + +%{__mkdir} -p $RPM_BUILD_ROOT%{_localstatedir}/log/nginx +%{__mkdir} -p $RPM_BUILD_ROOT%{_localstatedir}/run/nginx +%{__mkdir} -p $RPM_BUILD_ROOT%{_localstatedir}/cache/nginx + +%{__mkdir} -p $RPM_BUILD_ROOT%{_libdir}/nginx/modules +cd $RPM_BUILD_ROOT%{_sysconfdir}/nginx && \ + %{__ln_s} ../..%{_libdir}/nginx/modules modules && cd - + +%{__mkdir} -p $RPM_BUILD_ROOT%{_datadir}/doc/%{name}-%{main_version} +%{__install} -m 644 -p %{SOURCE12} \ + $RPM_BUILD_ROOT%{_datadir}/doc/%{name}-%{main_version}/ + +%{__mkdir} -p $RPM_BUILD_ROOT%{_sysconfdir}/nginx/conf.d +%{__rm} $RPM_BUILD_ROOT%{_sysconfdir}/nginx/nginx.conf +%{__install} -m 644 -p %{SOURCE4} \ + $RPM_BUILD_ROOT%{_sysconfdir}/nginx/nginx.conf +%{__install} -m 644 -p %{SOURCE5} \ + $RPM_BUILD_ROOT%{_sysconfdir}/nginx/conf.d/default.conf + +%{__mkdir} -p $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig +%{__install} -m 644 -p %{SOURCE3} \ + $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/nginx +%{__install} -m 644 -p %{SOURCE7} \ + $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/nginx-debug + +%{__install} -p -D -m 0644 %{bdir}/objs/nginx.8 \ + $RPM_BUILD_ROOT%{_mandir}/man8/nginx.8 + +%if %{use_systemd} +# install systemd-specific files +%{__mkdir} -p $RPM_BUILD_ROOT%{_unitdir} +%{__install} -m644 %SOURCE8 \ + $RPM_BUILD_ROOT%{_unitdir}/nginx.service +%{__install} -m644 %SOURCE11 \ + $RPM_BUILD_ROOT%{_unitdir}/nginx-debug.service +%{__mkdir} -p $RPM_BUILD_ROOT%{_libexecdir}/initscripts/legacy-actions/nginx +%{__install} -m755 %SOURCE9 \ + $RPM_BUILD_ROOT%{_libexecdir}/initscripts/legacy-actions/nginx/upgrade +%else +# install SYSV init stuff +%{__mkdir} -p $RPM_BUILD_ROOT%{_initrddir} +%{__install} -m755 nginx.init $RPM_BUILD_ROOT%{_initrddir}/nginx +%{__install} -m755 nginx-debug.init $RPM_BUILD_ROOT%{_initrddir}/nginx-debug +%endif + +# install log rotation stuff +%{__mkdir} -p $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d +%if 0%{?suse_version} +%{__install} -m 644 -p %{SOURCE10} \ + $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/nginx +%else +%{__install} -m 644 -p %{SOURCE1} \ + $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/nginx +%endif + +%{__install} -m755 %{bdir}/objs/nginx-debug \ + $RPM_BUILD_ROOT%{_sbindir}/nginx-debug + +%clean +%{__rm} -rf $RPM_BUILD_ROOT + +%files +%defattr(-,root,root) + +%{_sbindir}/nginx +%{_sbindir}/nginx-debug + +%dir %{_sysconfdir}/nginx +%dir %{_sysconfdir}/nginx/conf.d +%{_sysconfdir}/nginx/modules + +%config(noreplace) %{_sysconfdir}/nginx/nginx.conf +%config(noreplace) %{_sysconfdir}/nginx/conf.d/default.conf +%config(noreplace) %{_sysconfdir}/nginx/mime.types +%config(noreplace) %{_sysconfdir}/nginx/fastcgi_params +%config(noreplace) %{_sysconfdir}/nginx/scgi_params +%config(noreplace) %{_sysconfdir}/nginx/uwsgi_params +%config(noreplace) %{_sysconfdir}/nginx/koi-utf +%config(noreplace) %{_sysconfdir}/nginx/koi-win +%config(noreplace) %{_sysconfdir}/nginx/win-utf + +%config(noreplace) %{_sysconfdir}/logrotate.d/nginx +%config(noreplace) %{_sysconfdir}/sysconfig/nginx +%config(noreplace) %{_sysconfdir}/sysconfig/nginx-debug +%if %{use_systemd} +%{_unitdir}/nginx.service +%{_unitdir}/nginx-debug.service +%dir %{_libexecdir}/initscripts/legacy-actions/nginx +%{_libexecdir}/initscripts/legacy-actions/nginx/* +%else +%{_initrddir}/nginx +%{_initrddir}/nginx-debug +%endif + +%attr(0755,root,root) %dir %{_libdir}/nginx +%attr(0755,root,root) %dir %{_libdir}/nginx/modules +%dir %{_datadir}/nginx +%dir %{_datadir}/nginx/html +%{_datadir}/nginx/html/* + +%attr(0755,root,root) %dir %{_localstatedir}/cache/nginx +%attr(0755,root,root) %dir %{_localstatedir}/log/nginx + +%dir %{_datadir}/doc/%{name}-%{main_version} +%doc %{_datadir}/doc/%{name}-%{main_version}/COPYRIGHT +%{_mandir}/man8/nginx.8* + +%pre +# Add the "nginx" user +getent group %{nginx_group} >/dev/null || groupadd -r %{nginx_group} +getent passwd %{nginx_user} >/dev/null || \ + useradd -r -g %{nginx_group} -s /sbin/nologin \ + -d %{nginx_home} -c "nginx user" %{nginx_user} +exit 0 + +%post +# Register the nginx service +if [ $1 -eq 1 ]; then +%if %{use_systemd} + /usr/bin/systemctl preset nginx.service >/dev/null 2>&1 ||: + /usr/bin/systemctl preset nginx-debug.service >/dev/null 2>&1 ||: +%else + /sbin/chkconfig --add nginx + /sbin/chkconfig --add nginx-debug +%endif + # print site info + cat <<BANNER +---------------------------------------------------------------------- + +Thanks for using nginx! + +Please find the official documentation for nginx here: +* http://nginx.org/en/docs/ + +Commercial subscriptions for nginx are available on: +* http://nginx.com/products/ + +---------------------------------------------------------------------- +BANNER + + # Touch and set permisions on default log files on installation + + if [ -d %{_localstatedir}/log/nginx ]; then + if [ ! -e %{_localstatedir}/log/nginx/access.log ]; then + touch %{_localstatedir}/log/nginx/access.log + %{__chmod} 640 %{_localstatedir}/log/nginx/access.log + %{__chown} nginx:%{nginx_loggroup} %{_localstatedir}/log/nginx/access.log + fi + + if [ ! -e %{_localstatedir}/log/nginx/error.log ]; then + touch %{_localstatedir}/log/nginx/error.log + %{__chmod} 640 %{_localstatedir}/log/nginx/error.log + %{__chown} nginx:%{nginx_loggroup} %{_localstatedir}/log/nginx/error.log + fi + fi +fi + +%preun +if [ $1 -eq 0 ]; then +%if %use_systemd + /usr/bin/systemctl --no-reload disable nginx.service >/dev/null 2>&1 ||: + /usr/bin/systemctl stop nginx.service >/dev/null 2>&1 ||: +%else + /sbin/service nginx stop > /dev/null 2>&1 + /sbin/chkconfig --del nginx + /sbin/chkconfig --del nginx-debug +%endif +fi + +%postun +%if %use_systemd +/usr/bin/systemctl daemon-reload >/dev/null 2>&1 ||: +%endif +if [ $1 -ge 1 ]; then + /sbin/service nginx status >/dev/null 2>&1 || exit 0 + /sbin/service nginx upgrade >/dev/null 2>&1 || echo \ + "Binary upgrade failed, please check nginx's error.log" +fi + +%changelog +* Mon Oct 10 2016 Andrei Belov <defan@nginx.com> +- 1.11.5 + +* Tue Sep 13 2016 Konstantin Pavlov <thresh@nginx.com> +- 1.11.4. +- njs updated to 0.1.2. + +* Tue Jul 26 2016 Konstantin Pavlov <thresh@nginx.com> +- 1.11.3. +- njs updated to 0.1.0. +- njs stream dynamic module added to nginx-module-njs package. +- geoip stream dynamic module added to nginx-module-geoip package. + +* Tue Jul 5 2016 Konstantin Pavlov <thresh@nginx.com> +- 1.11.2 +- njs updated to ef2b708510b1. + +* Tue May 31 2016 Konstantin Pavlov <thresh@nginx.com> +- 1.11.1 + +* Wed May 24 2016 Sergey Budnevitch <sb@nginx.com> +- Fixed logrotate error if nginx is not running +- 1.11.0 + +* Tue Apr 19 2016 Konstantin Pavlov <thresh@nginx.com> +- 1.9.15 +- njs updated to 1c50334fbea6. + +* Tue Apr 5 2016 Konstantin Pavlov <thresh@nginx.com> +- 1.9.14 + +* Tue Mar 29 2016 Konstantin Pavlov <thresh@nginx.com> +- 1.9.13 +- Added perl and nJScript dynamic modules +- Fixed Requires section for dynamic modules on CentOS7/RHEL7 + +* Wed Feb 24 2016 Sergey Budnevitch <sb@nginx.com> +- common configure args are now in macros +- xslt, image-filter and geoip dynamic modules added +- 1.9.12 + +* Tue Feb 9 2016 Sergey Budnevitch <sb@nginx.com> +- dynamic modules path and symlink in %{_sysconfdir}/nginx added +- 1.9.11 + +* Tue Jan 26 2016 Konstantin Pavlov <thresh@nginx.com> +- 1.9.10 + +* Wed Dec 9 2015 Konstantin Pavlov <thresh@nginx.com> +- 1.9.9 + +* Tue Dec 8 2015 Konstantin Pavlov <thresh@nginx.com> +- 1.9.8 +- http_slice module enabled + +* Tue Nov 17 2015 Konstantin Pavlov <thresh@nginx.com> +- 1.9.7 + +* Tue Oct 27 2015 Sergey Budnevitch <sb@nginx.com> +- 1.9.6 + +* Tue Sep 22 2015 Andrei Belov <defan@nginx.com> +- 1.9.5 +- http_spdy module replaced with http_v2 module + +* Tue Aug 18 2015 Konstantin Pavlov <thresh@nginx.com> +- 1.9.4 + +* Tue Jul 14 2015 Sergey Budnevitch <sb@nginx.com> +- 1.9.3 + +* Tue May 26 2015 Sergey Budnevitch <sb@nginx.com> +- 1.9.1 + +* Tue Apr 28 2015 Sergey Budnevitch <sb@nginx.com> +- 1.9.0 +- thread pool support added +- stream module added +- example_ssl.conf removed + +* Tue Apr 7 2015 Sergey Budnevitch <sb@nginx.com> +- 1.7.12 + +* Tue Mar 24 2015 Sergey Budnevitch <sb@nginx.com> +- 1.7.11 + +* Tue Feb 10 2015 Sergey Budnevitch <sb@nginx.com> +- 1.7.10 + +* Tue Dec 23 2014 Sergey Budnevitch <sb@nginx.com> +- 1.7.9 + +* Tue Dec 2 2014 Sergey Budnevitch <sb@nginx.com> +- 1.7.8 + +* Tue Sep 30 2014 Sergey Budnevitch <sb@nginx.com> +- 1.7.6 + +* Tue Sep 16 2014 Sergey Budnevitch <sb@nginx.com> +- epoch added to the EPEL7/CentOS7 spec to override EPEL one +- 1.7.5 + +* Tue Aug 5 2014 Sergey Budnevitch <sb@nginx.com> +- 1.7.4 + +* Tue Jul 8 2014 Sergey Budnevitch <sb@nginx.com> +- 1.7.3 + +* Tue Jun 17 2014 Sergey Budnevitch <sb@nginx.com> +- 1.7.2 + +* Tue May 27 2014 Sergey Budnevitch <sb@nginx.com> +- 1.7.1 +- incorrect sysconfig filename finding in the initscript fixed + +* Thu Apr 24 2014 Konstantin Pavlov <thresh@nginx.com> +- 1.7.0 + +* Tue Apr 8 2014 Sergey Budnevitch <sb@nginx.com> +- 1.5.13 +- built spdy module on rhel/centos 6 + +* Tue Mar 18 2014 Sergey Budnevitch <sb@nginx.com> +- 1.5.12 +- spec cleanup +- openssl version dependence added +- upgrade() function in the init script improved +- warning added when binary upgrade returns non-zero exit code + +* Tue Mar 4 2014 Sergey Budnevitch <sb@nginx.com> +- 1.5.11 + +* Tue Feb 4 2014 Sergey Budnevitch <sb@nginx.com> +- 1.5.10 + +* Wed Jan 22 2014 Sergey Budnevitch <sb@nginx.com> +- 1.5.9 + +* Tue Dec 17 2013 Sergey Budnevitch <sb@nginx.com> +- 1.5.8 +- fixed invalid week days in the changelog + +* Tue Nov 19 2013 Sergey Budnevitch <sb@nginx.com> +- 1.5.7 + +* Tue Oct 1 2013 Sergey Budnevitch <sb@nginx.com> +- 1.5.6 + +* Tue Sep 17 2013 Andrei Belov <defan@nginx.com> +- 1.5.5 + +* Tue Aug 27 2013 Sergey Budnevitch <sb@nginx.com> +- 1.5.4 +- auth request module added + +* Tue Jul 30 2013 Sergey Budnevitch <sb@nginx.com> +- 1.5.3 + +* Tue Jul 2 2013 Sergey Budnevitch <sb@nginx.com> +- 1.5.2 + +* Tue Jun 4 2013 Sergey Budnevitch <sb@nginx.com> +- 1.5.1 + +* Mon May 6 2013 Sergey Budnevitch <sb@nginx.com> +- 1.5.0 + +* Tue Apr 16 2013 Sergey Budnevitch <sb@nginx.com> +- 1.3.16 + +* Tue Mar 26 2013 Sergey Budnevitch <sb@nginx.com> +- 1.3.15 +- gunzip module added +- set permissions on default log files at installation + +* Tue Feb 12 2013 Sergey Budnevitch <sb@nginx.com> +- excess slash removed from --prefix +- 1.2.7 + +* Tue Dec 11 2012 Sergey Budnevitch <sb@nginx.com> +- 1.2.6 + +* Tue Nov 13 2012 Sergey Budnevitch <sb@nginx.com> +- 1.2.5 + +* Tue Sep 25 2012 Sergey Budnevitch <sb@nginx.com> +- 1.2.4 + +* Tue Aug 7 2012 Sergey Budnevitch <sb@nginx.com> +- 1.2.3 +- nginx-debug package now actually contains non stripped binary + +* Tue Jul 3 2012 Sergey Budnevitch <sb@nginx.com> +- 1.2.2 + +* Tue Jun 5 2012 Sergey Budnevitch <sb@nginx.com> +- 1.2.1 + +* Mon Apr 23 2012 Sergey Budnevitch <sb@nginx.com> +- 1.2.0 + +* Thu Apr 12 2012 Sergey Budnevitch <sb@nginx.com> +- 1.0.15 + +* Thu Mar 15 2012 Sergey Budnevitch <sb@nginx.com> +- 1.0.14 +- OpenSUSE init script and SuSE specific changes to spec file added + +* Mon Mar 5 2012 Sergey Budnevitch <sb@nginx.com> +- 1.0.13 + +* Mon Feb 6 2012 Sergey Budnevitch <sb@nginx.com> +- 1.0.12 +- banner added to install script + +* Thu Dec 15 2011 Sergey Budnevitch <sb@nginx.com> +- 1.0.11 +- init script enhancements (thanks to Gena Makhomed) +- one second sleep during upgrade replaced with 0.1 sec usleep + +* Tue Nov 15 2011 Sergey Budnevitch <sb@nginx.com> +- 1.0.10 + +* Tue Nov 1 2011 Sergey Budnevitch <sb@nginx.com> +- 1.0.9 +- nginx-debug package added + +* Tue Oct 11 2011 Sergey Budnevitch <sb@nginx.com> +- spec file cleanup (thanks to Yury V. Zaytsev) +- log dir permitions fixed +- logrotate creates new logfiles with nginx owner +- "upgrade" argument to init-script added (based on fedora one) + +* Sat Oct 1 2011 Sergey Budnevitch <sb@nginx.com> +- 1.0.8 +- built with mp4 module + +* Fri Sep 30 2011 Sergey Budnevitch <sb@nginx.com> +- 1.0.7 + +* Tue Aug 30 2011 Sergey Budnevitch <sb@nginx.com> +- 1.0.6 +- replace "conf.d/*" config include with "conf.d/*.conf" in default nginx.conf + +* Wed Aug 10 2011 Sergey Budnevitch +- Initial release