| #!/usr/bin/perl |
| |
| # (C) Sergey Kandaurov |
| # (C) Nginx, Inc. |
| |
| # Tests for OCSP stapling. |
| |
| ############################################################################### |
| |
| use warnings; |
| use strict; |
| |
| use Test::More; |
| |
| use MIME::Base64 qw/ decode_base64 /; |
| |
| BEGIN { use FindBin; chdir($FindBin::Bin); } |
| |
| use lib 'lib'; |
| use Test::Nginx; |
| |
| ############################################################################### |
| |
| select STDERR; $| = 1; |
| select STDOUT; $| = 1; |
| |
| eval { |
| require Net::SSLeay; |
| Net::SSLeay::load_error_strings(); |
| Net::SSLeay::SSLeay_add_ssl_algorithms(); |
| Net::SSLeay::randomize(); |
| Net::SSLeay::SSLeay(); |
| defined &Net::SSLeay::set_tlsext_status_type or die; |
| }; |
| plan(skip_all => 'Net::SSLeay not installed or too old') if $@; |
| |
| my $t = Test::Nginx->new()->has(qw/http http_ssl/)->has_daemon('openssl'); |
| |
| plan(skip_all => 'no OCSP stapling') if $t->has_module('BoringSSL'); |
| |
| $t->plan(9)->write_file_expand('nginx.conf', <<'EOF'); |
| |
| %%TEST_GLOBALS%% |
| |
| daemon off; |
| |
| events { |
| } |
| |
| http { |
| %%TEST_GLOBALS_HTTP%% |
| |
| ssl_stapling on; |
| ssl_trusted_certificate trusted.crt; |
| |
| ssl_certificate ec-end-int.crt; |
| ssl_certificate_key ec-end.key; |
| |
| ssl_certificate end-int.crt; |
| ssl_certificate_key end.key; |
| |
| server { |
| listen 127.0.0.1:8443 ssl; |
| listen 127.0.0.1:8080; |
| server_name localhost; |
| } |
| |
| server { |
| listen 127.0.0.1:8444 ssl; |
| server_name localhost; |
| |
| ssl_stapling_responder http://127.0.0.1:8081/; |
| } |
| |
| server { |
| listen 127.0.0.1:8445 ssl; |
| server_name localhost; |
| |
| ssl_stapling_verify on; |
| } |
| |
| server { |
| listen 127.0.0.1:8446 ssl; |
| server_name localhost; |
| |
| ssl_certificate ec-end.crt; |
| ssl_certificate_key ec-end.key; |
| } |
| |
| server { |
| listen 127.0.0.1:8447 ssl; |
| server_name localhost; |
| |
| ssl_certificate end-int.crt; |
| ssl_certificate_key end.key; |
| |
| ssl_stapling_file %%TESTDIR%%/resp.der; |
| } |
| |
| server { |
| listen 127.0.0.1:8448 ssl; |
| server_name localhost; |
| |
| ssl_certificate ec-end-int.crt; |
| ssl_certificate_key ec-end.key; |
| |
| ssl_stapling_file %%TESTDIR%%/ec-resp.der; |
| } |
| |
| server { |
| listen 127.0.0.1:8449 ssl; |
| server_name localhost; |
| |
| ssl_stapling_responder http://127.0.0.1:8080/; |
| } |
| } |
| |
| EOF |
| |
| my $d = $t->testdir(); |
| my $p = port(8081); |
| |
| $t->write_file('openssl.conf', <<EOF); |
| [ req ] |
| default_bits = 1024 |
| encrypt_key = no |
| distinguished_name = req_distinguished_name |
| [ req_distinguished_name ] |
| EOF |
| |
| $t->write_file('ca.conf', <<EOF); |
| [ ca ] |
| default_ca = myca |
| |
| [ myca ] |
| new_certs_dir = $d |
| database = $d/certindex |
| default_md = sha1 |
| policy = myca_policy |
| serial = $d/certserial |
| default_days = 1 |
| x509_extensions = myca_extensions |
| |
| [ myca_policy ] |
| commonName = supplied |
| |
| [ myca_extensions ] |
| basicConstraints = critical,CA:TRUE |
| authorityInfoAccess = OCSP;URI:http://127.0.0.1:$p |
| EOF |
| |
| foreach my $name ('root') { |
| system('openssl req -x509 -new ' |
| . "-config $d/openssl.conf -subj /CN=$name/ " |
| . "-out $d/$name.crt -keyout $d/$name.key " |
| . ">>$d/openssl.out 2>&1") == 0 |
| or die "Can't create certificate for $name: $!\n"; |
| } |
| |
| foreach my $name ('int', 'end') { |
| system("openssl req -new " |
| . "-config $d/openssl.conf -subj /CN=$name/ " |
| . "-out $d/$name.csr -keyout $d/$name.key " |
| . ">>$d/openssl.out 2>&1") == 0 |
| or die "Can't create certificate for $name: $!\n"; |
| } |
| |
| foreach my $name ('ec-end') { |
| system("openssl ecparam -genkey -out $d/$name.key -name prime256v1 " |
| . ">>$d/openssl.out 2>&1") == 0 |
| or die "Can't create EC param: $!\n"; |
| system("openssl req -new -key $d/$name.key " |
| . "-config $d/openssl.conf -subj /CN=$name/ " |
| . "-out $d/$name.csr " |
| . ">>$d/openssl.out 2>&1") == 0 |
| or die "Can't create certificate for $name: $!\n"; |
| } |
| |
| $t->write_file('certserial', '1000'); |
| $t->write_file('certindex', ''); |
| |
| system("openssl ca -batch -config $d/ca.conf " |
| . "-keyfile $d/root.key -cert $d/root.crt " |
| . "-subj /CN=int/ -in $d/int.csr -out $d/int.crt " |
| . ">>$d/openssl.out 2>&1") == 0 |
| or die "Can't sign certificate for int: $!\n"; |
| |
| system("openssl ca -batch -config $d/ca.conf " |
| . "-keyfile $d/int.key -cert $d/int.crt " |
| . "-subj /CN=ec-end/ -in $d/ec-end.csr -out $d/ec-end.crt " |
| . ">>$d/openssl.out 2>&1") == 0 |
| or die "Can't sign certificate for ec-end: $!\n"; |
| |
| system("openssl ca -batch -config $d/ca.conf " |
| . "-keyfile $d/int.key -cert $d/int.crt " |
| . "-subj /CN=end/ -in $d/end.csr -out $d/end.crt " |
| . ">>$d/openssl.out 2>&1") == 0 |
| or die "Can't sign certificate for end: $!\n"; |
| |
| # RFC 6960, serialNumber |
| |
| system("openssl x509 -in $d/end.crt -serial -noout " |
| . ">>$d/serial 2>>$d/openssl.out") == 0 |
| or die "Can't obtain serial for end: $!\n"; |
| |
| my $serial = pack("n2", 0x0202, hex $1) if $t->read_file('serial') =~ /(\d+)/; |
| |
| system("openssl ca -config $d/ca.conf -revoke $d/end.crt " |
| . "-keyfile $d/root.key -cert $d/root.crt " |
| . ">>$d/openssl.out 2>&1") == 0 |
| or die "Can't revoke end.crt: $!\n"; |
| |
| system("openssl ocsp -issuer $d/int.crt -cert $d/end.crt " |
| . "-reqout $d/req.der >>$d/openssl.out 2>&1") == 0 |
| or die "Can't create OCSP request: $!\n"; |
| |
| system("openssl ocsp -index $d/certindex -CA $d/int.crt " |
| . "-rsigner $d/root.crt -rkey $d/root.key " |
| . "-reqin $d/req.der -respout $d/resp.der -ndays 1 " |
| . ">>$d/openssl.out 2>&1") == 0 |
| or die "Can't create OCSP response: $!\n"; |
| |
| system("openssl ocsp -issuer $d/int.crt -cert $d/ec-end.crt " |
| . "-reqout $d/ec-req.der >>$d/openssl.out 2>&1") == 0 |
| or die "Can't create EC OCSP request: $!\n"; |
| |
| system("openssl ocsp -index $d/certindex -CA $d/int.crt " |
| . "-rsigner $d/root.crt -rkey $d/root.key " |
| . "-reqin $d/ec-req.der -respout $d/ec-resp.der -ndays 1 " |
| . ">>$d/openssl.out 2>&1") == 0 |
| or die "Can't create EC OCSP response: $!\n"; |
| |
| $t->write_file('trusted.crt', |
| $t->read_file('int.crt') . $t->read_file('root.crt')); |
| $t->write_file('end-int.crt', |
| $t->read_file('end.crt') . $t->read_file('int.crt')); |
| $t->write_file('ec-end-int.crt', |
| $t->read_file('ec-end.crt') . $t->read_file('int.crt')); |
| |
| $t->run_daemon(\&http_daemon, $t); |
| $t->run(); |
| |
| $t->waitforsocket("127.0.0.1:" . port(8081)); |
| |
| ############################################################################### |
| |
| my $version = get_version(); |
| |
| staple(8443, 'RSA'); |
| staple(8443, 'ECDSA'); |
| staple(8444, 'RSA'); |
| staple(8444, 'ECDSA'); |
| staple(8445, 'ECDSA'); |
| staple(8446, 'ECDSA'); |
| staple(8449, 'ECDSA'); |
| |
| sleep 1; |
| |
| ok(!staple(8443, 'RSA'), 'staple revoked'); |
| ok(staple(8443, 'ECDSA'), 'staple success'); |
| |
| ok(!staple(8444, 'RSA'), 'responder revoked'); |
| ok(staple(8444, 'ECDSA'), 'responder success'); |
| |
| ok(!staple(8445, 'ECDSA'), 'verify - root not trusted'); |
| |
| ok(staple(8446, 'ECDSA', "$d/int.crt"), 'cert store'); |
| |
| is(staple(8447, 'RSA'), '1 1', 'file revoked'); |
| is(staple(8448, 'ECDSA'), '1 0', 'file success'); |
| |
| ok(!staple(8449, 'ECDSA'), 'ocsp error'); |
| |
| ############################################################################### |
| |
| sub staple { |
| my ($port, $ciphers, $ca) = @_; |
| my (@resp); |
| |
| my $staple_cb = sub { |
| my ($ssl, $resp) = @_; |
| push @resp, !!$resp; |
| return 1 unless $resp; |
| my $cert = Net::SSLeay::get_peer_certificate($ssl); |
| my $certid = eval { Net::SSLeay::OCSP_cert2ids($ssl, $cert) } |
| or do { die "no OCSP_CERTID for certificate: $@"; }; |
| |
| my @res = Net::SSLeay::OCSP_response_results($resp, $certid); |
| push @resp, $res[0][2]->{'statusType'}; |
| }; |
| |
| my $s; |
| |
| eval { |
| local $SIG{ALRM} = sub { die "timeout\n" }; |
| local $SIG{PIPE} = sub { die "sigpipe\n" }; |
| alarm(8); |
| $s = IO::Socket::INET->new('127.0.0.1:' . port($port)); |
| alarm(0); |
| }; |
| alarm(0); |
| |
| if ($@) { |
| log_in("died: $@"); |
| return undef; |
| } |
| |
| my $ctx = Net::SSLeay::CTX_new() or die("Failed to create SSL_CTX $!"); |
| |
| my $ssleay = Net::SSLeay::SSLeay(); |
| if ($ssleay < 0x1000200f || $ssleay == 0x20000000) { |
| Net::SSLeay::CTX_set_cipher_list($ctx, $ciphers) |
| or die("Failed to set cipher list"); |
| } else { |
| # SSL_CTRL_SET_SIGALGS_LIST |
| $ciphers = 'PSS' if $ciphers eq 'RSA' && $version > 0x0303; |
| Net::SSLeay::CTX_ctrl($ctx, 98, 0, $ciphers . '+SHA256') |
| or die("Failed to set sigalgs"); |
| } |
| |
| Net::SSLeay::CTX_load_verify_locations($ctx, $ca || '', ''); |
| Net::SSLeay::CTX_set_tlsext_status_cb($ctx, $staple_cb); |
| my $ssl = Net::SSLeay::new($ctx) or die("Failed to create SSL $!"); |
| Net::SSLeay::set_tlsext_status_type($ssl, |
| Net::SSLeay::TLSEXT_STATUSTYPE_ocsp()); |
| Net::SSLeay::set_fd($ssl, fileno($s)); |
| Net::SSLeay::connect($ssl) or die("ssl connect"); |
| |
| return join ' ', @resp; |
| } |
| |
| sub get_version { |
| my $s; |
| |
| eval { |
| local $SIG{ALRM} = sub { die "timeout\n" }; |
| local $SIG{PIPE} = sub { die "sigpipe\n" }; |
| alarm(8); |
| $s = IO::Socket::INET->new('127.0.0.1:' . port(8443)); |
| alarm(0); |
| }; |
| alarm(0); |
| |
| if ($@) { |
| log_in("died: $@"); |
| return undef; |
| } |
| |
| my $ctx = Net::SSLeay::CTX_new() or die("Failed to create SSL_CTX $!"); |
| my $ssl = Net::SSLeay::new($ctx) or die("Failed to create SSL $!"); |
| Net::SSLeay::set_fd($ssl, fileno($s)); |
| Net::SSLeay::connect($ssl) or die("ssl connect"); |
| |
| Net::SSLeay::version($ssl); |
| } |
| |
| ############################################################################### |
| |
| sub http_daemon { |
| my ($t) = shift; |
| my $server = IO::Socket::INET->new( |
| Proto => 'tcp', |
| LocalHost => "127.0.0.1:" . port(8081), |
| Listen => 5, |
| Reuse => 1 |
| ) |
| or die "Can't create listening socket: $!\n"; |
| |
| local $SIG{PIPE} = 'IGNORE'; |
| |
| while (my $client = $server->accept()) { |
| $client->autoflush(1); |
| |
| my $headers = ''; |
| my $uri = ''; |
| |
| while (<$client>) { |
| $headers .= $_; |
| last if (/^\x0d?\x0a?$/); |
| } |
| |
| $uri = $1 if $headers =~ /^\S+\s+\/([^ ]+)\s+HTTP/i; |
| next unless $uri; |
| |
| $uri =~ s/%([0-9A-Fa-f]{2})/chr(hex($1))/eg; |
| my $req = decode_base64($uri); |
| my $resp = index($req, $serial) > 0 ? 'resp' : 'ec-resp'; |
| |
| # ocsp dummy handler |
| |
| select undef, undef, undef, 0.02; |
| |
| $headers = <<"EOF"; |
| HTTP/1.1 200 OK |
| Connection: close |
| Content-Type: application/ocsp-response |
| |
| EOF |
| |
| print $client $headers . $t->read_file("$resp.der"); |
| } |
| } |
| |
| ############################################################################### |