#
%define nginx_home %{_localstatedir}/cache/nginx
%define nginx_user nginx
%define nginx_group nginx
%define nginx_loggroup adm

# distribution specific definitions
%define use_systemd (0%{?fedora} && 0%{?fedora} >= 18) || (0%{?rhel} && 0%{?rhel} >= 7) || (0%{?suse_version} == 1315)

%if 0%{?rhel}  == 5
%define _group System Environment/Daemons
Requires(pre): shadow-utils
Requires: initscripts >= 8.36
Requires(post): chkconfig
Requires: openssl
BuildRequires: openssl-devel
BuildRequires: perl
BuildRequires: GeoIP-devel
%endif

%if 0%{?rhel}  == 6
%define _group System Environment/Daemons
%define with_http2 1
Requires(pre): shadow-utils
Requires: initscripts >= 8.36
Requires(post): chkconfig
Requires: openssl >= 1.0.1
BuildRequires: openssl-devel >= 1.0.1
BuildRequires: perl-devel
BuildRequires: perl-ExtUtils-Embed
BuildRequires: GeoIP-devel
%endif

%if 0%{?rhel}  == 7
%define _group System Environment/Daemons
%define epoch 1
%define with_http2 1
Epoch: %{epoch}
Requires(pre): shadow-utils
Requires: systemd
Requires: openssl >= 1.0.1
BuildRequires: systemd
BuildRequires: openssl-devel >= 1.0.1
BuildRequires: perl-devel
BuildRequires: perl-ExtUtils-Embed
BuildRequires: GeoIP-devel
%endif

%if 0%{?suse_version} == 1315
%define _group Productivity/Networking/Web/Servers
%define with_http2 1
%define nginx_loggroup trusted
Requires(pre): shadow
Requires: systemd
BuildRequires: libopenssl-devel
BuildRequires: systemd
BuildRequires: perl
BuildRequires: libGeoIP-devel
%endif

# end of distribution specific definitions

%define main_version                 1.11.2
%define main_release                 1%{?dist}.ngx
%define njs_version                  0.1.0
%define module_xslt_version          %{main_version}
%define module_xslt_release          1%{?dist}.ngx
%define module_geoip_version         %{main_version}
%define module_geoip_release         1%{?dist}.ngx
%define module_image_filter_version  %{main_version}
%define module_image_filter_release  1%{?dist}.ngx
%define module_perl_version          %{main_version}
%define module_perl_release          1%{?dist}.ngx
%define module_njs_version           %{main_version}.%{njs_version}
%define module_njs_release           1%{?dist}.ngx

%define bdir %{_builddir}/%{name}-%{main_version}

%define WITH_CC_OPT $(echo %{optflags} $(pcre-config --cflags))

%define COMMON_CONFIGURE_ARGS $(echo "\
        --prefix=%{_sysconfdir}/nginx \
        --sbin-path=%{_sbindir}/nginx \
        --modules-path=%{_libdir}/nginx/modules \
        --conf-path=%{_sysconfdir}/nginx/nginx.conf \
        --error-log-path=%{_localstatedir}/log/nginx/error.log \
        --http-log-path=%{_localstatedir}/log/nginx/access.log \
        --pid-path=%{_localstatedir}/run/nginx.pid \
        --lock-path=%{_localstatedir}/run/nginx.lock \
        --http-client-body-temp-path=%{_localstatedir}/cache/nginx/client_temp \
        --http-proxy-temp-path=%{_localstatedir}/cache/nginx/proxy_temp \
        --http-fastcgi-temp-path=%{_localstatedir}/cache/nginx/fastcgi_temp \
        --http-uwsgi-temp-path=%{_localstatedir}/cache/nginx/uwsgi_temp \
        --http-scgi-temp-path=%{_localstatedir}/cache/nginx/scgi_temp \
        --user=%{nginx_user} \
        --group=%{nginx_group} \
        --with-http_ssl_module \
        --with-http_realip_module \
        --with-http_addition_module \
        --with-http_sub_module \
        --with-http_dav_module \
        --with-http_flv_module \
        --with-http_mp4_module \
        --with-http_gunzip_module \
        --with-http_gzip_static_module \
        --with-http_random_index_module \
        --with-http_secure_link_module \
        --with-http_stub_status_module \
        --with-http_auth_request_module \
        --with-http_xslt_module=dynamic \
        --with-http_image_filter_module=dynamic \
        --with-http_geoip_module=dynamic \
        --with-http_perl_module=dynamic \
        --add-dynamic-module=njs-%{njs_version}/nginx \
        --with-threads \
        --with-stream \
        --with-stream_ssl_module \
        --with-stream_geoip_module=dynamic \
        --with-http_slice_module \
        --with-mail \
        --with-mail_ssl_module \
        --with-file-aio \
        --with-ipv6 \
        %{?with_http2:--with-http_v2_module}")

Summary: High performance web server
Name: nginx
Version: %{main_version}
Release: %{main_release}
Vendor: Nginx, Inc.
URL: http://nginx.org/
Group: %{_group}

Source0: http://nginx.org/download/%{name}-%{version}.tar.gz
Source1: logrotate
Source2: nginx.init.in
Source3: nginx.sysconf
Source4: nginx.conf
Source5: nginx.vh.default.conf
Source7: nginx-debug.sysconf
Source8: nginx.service
Source9: nginx.upgrade.sh
Source10: nginx.suse.logrotate
Source11: nginx-debug.service
Source12: COPYRIGHT
Source13: njs-%{njs_version}.tar.gz

License: 2-clause BSD-like license

BuildRoot: %{_tmppath}/%{name}-%{main_version}-%{main_release}-root
BuildRequires: zlib-devel
BuildRequires: pcre-devel
BuildRequires: libxslt-devel
BuildRequires: gd-devel

Provides: webserver

%description
nginx [engine x] is an HTTP and reverse proxy server, as well as
a mail proxy server.

%if 0%{?suse_version} == 1315
%debug_package
%endif

%package module-xslt
Version: %{module_xslt_version}
Release: %{module_xslt_release}
Group: %{_group}
Requires: nginx = %{?epoch:%{epoch}:}%{main_version}-%{main_release}
Summary: nginx xslt module
%description module-xslt
Dynamic xslt module for nginx.

%package module-image-filter
Version: %{module_image_filter_version}
Release: %{module_image_filter_release}
Group: %{_group}
Requires: nginx = %{?epoch:%{epoch}:}%{main_version}-%{main_release}
Summary: nginx image filter module
%description module-image-filter
Dynamic image filter module for nginx.

%package module-geoip
Version: %{module_geoip_version}
Release: %{module_geoip_release}
Group: %{_group}
Requires: nginx = %{?epoch:%{epoch}:}%{main_version}-%{main_release}
Summary: nginx geoip modules
%description module-geoip
Dynamic geoip modules for nginx.

%package module-perl
Version: %{module_perl_version}
Release: %{module_perl_release}
Group: %{_group}
Requires: nginx = %{?epoch:%{epoch}:}%{main_version}-%{main_release}
Requires: perl(:MODULE_COMPAT_%(eval "`%{__perl} -V:version`"; echo $version))
Summary: nginx perl module
%description module-perl
Dynamic perl module for nginx.

%package module-njs
Version: %{module_njs_version}
Release: %{module_njs_release}
Group: %{_group}
Requires: nginx = %{?epoch:%{epoch}:}%{main_version}-%{main_release}
Summary: nginx nJScript module
%description module-njs
Dynamic nJScript module for nginx.

%prep
%setup -q
tar xvzf %SOURCE13
cp %{SOURCE2} .
sed -e 's|%%DEFAULTSTART%%|2 3 4 5|g' -e 's|%%DEFAULTSTOP%%|0 1 6|g' \
    -e 's|%%PROVIDES%%|nginx|g' < %{SOURCE2} > nginx.init
sed -e 's|%%DEFAULTSTART%%||g' -e 's|%%DEFAULTSTOP%%|0 1 2 3 4 5 6|g' \
    -e 's|%%PROVIDES%%|nginx-debug|g' < %{SOURCE2} > nginx-debug.init

%build
./configure %{COMMON_CONFIGURE_ARGS} \
    --with-cc-opt="%{WITH_CC_OPT}" \
    --with-debug
make %{?_smp_mflags}
%{__mv} %{bdir}/objs/nginx \
    %{bdir}/objs/nginx-debug
%{__mv} %{bdir}/objs/ngx_http_xslt_filter_module.so \
    %{bdir}/objs/ngx_http_xslt_filter_module-debug.so
%{__mv} %{bdir}/objs/ngx_http_image_filter_module.so \
    %{bdir}/objs/ngx_http_image_filter_module-debug.so
%{__mv} %{bdir}/objs/ngx_http_geoip_module.so \
    %{bdir}/objs/ngx_http_geoip_module-debug.so
%{__mv} %{bdir}/objs/ngx_http_perl_module.so \
    %{bdir}/objs/ngx_http_perl_module-debug.so
%{__mv} %{bdir}/objs/src/http/modules/perl/blib/arch/auto/nginx/nginx.so \
    %{bdir}/objs/src/http/modules/perl/blib/arch/auto/nginx/nginx-debug.so
%{__mv} %{bdir}/objs/ngx_http_js_module.so \
    %{bdir}/objs/ngx_http_js_module-debug.so
%{__mv} %{bdir}/objs/ngx_stream_js_module.so \
    %{bdir}/objs/ngx_stream_js_module-debug.so
%{__mv} %{bdir}/objs/ngx_stream_geoip_module.so \
    %{bdir}/objs/ngx_stream_geoip_module-debug.so
./configure %{COMMON_CONFIGURE_ARGS} \
    --with-cc-opt="%{WITH_CC_OPT}"
make %{?_smp_mflags}

%install
%{__rm} -rf $RPM_BUILD_ROOT
%{__make} DESTDIR=$RPM_BUILD_ROOT INSTALLDIRS=vendor install

find %{buildroot} -type f -name .packlist -exec rm -f '{}' \;
find %{buildroot} -type f -name perllocal.pod -exec rm -f '{}' \;
find %{buildroot} -type f -empty -exec rm -f '{}' \;
find %{buildroot} -type f -name nginx.so -exec chmod u+w '{}' \;

%{__mkdir} -p $RPM_BUILD_ROOT%{_datadir}/nginx
%{__mv} $RPM_BUILD_ROOT%{_sysconfdir}/nginx/html $RPM_BUILD_ROOT%{_datadir}/nginx/

%{__rm} -f $RPM_BUILD_ROOT%{_sysconfdir}/nginx/*.default
%{__rm} -f $RPM_BUILD_ROOT%{_sysconfdir}/nginx/fastcgi.conf

%{__mkdir} -p $RPM_BUILD_ROOT%{_localstatedir}/log/nginx
%{__mkdir} -p $RPM_BUILD_ROOT%{_localstatedir}/run/nginx
%{__mkdir} -p $RPM_BUILD_ROOT%{_localstatedir}/cache/nginx

%{__mkdir} -p $RPM_BUILD_ROOT%{_libdir}/nginx/modules
cd $RPM_BUILD_ROOT%{_sysconfdir}/nginx && \
    %{__ln_s} ../..%{_libdir}/nginx/modules modules && cd -

%{__mkdir} -p $RPM_BUILD_ROOT%{_datadir}/doc/%{name}-%{main_version}
%{__install} -m 644 -p %{SOURCE12} \
    $RPM_BUILD_ROOT%{_datadir}/doc/%{name}-%{main_version}/

%{__mkdir} -p $RPM_BUILD_ROOT%{_sysconfdir}/nginx/conf.d
%{__rm} $RPM_BUILD_ROOT%{_sysconfdir}/nginx/nginx.conf
%{__install} -m 644 -p %{SOURCE4} \
    $RPM_BUILD_ROOT%{_sysconfdir}/nginx/nginx.conf
%{__install} -m 644 -p %{SOURCE5} \
    $RPM_BUILD_ROOT%{_sysconfdir}/nginx/conf.d/default.conf

%{__mkdir} -p $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig
%{__install} -m 644 -p %{SOURCE3} \
    $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/nginx
%{__install} -m 644 -p %{SOURCE7} \
    $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/nginx-debug

%if %{use_systemd}
# install systemd-specific files
%{__mkdir} -p $RPM_BUILD_ROOT%{_unitdir}
%{__install} -m644 %SOURCE8 \
    $RPM_BUILD_ROOT%{_unitdir}/nginx.service
%{__install} -m644 %SOURCE11 \
    $RPM_BUILD_ROOT%{_unitdir}/nginx-debug.service
%{__mkdir} -p $RPM_BUILD_ROOT%{_libexecdir}/initscripts/legacy-actions/nginx
%{__install} -m755 %SOURCE9 \
    $RPM_BUILD_ROOT%{_libexecdir}/initscripts/legacy-actions/nginx/upgrade
%else
# install SYSV init stuff
%{__mkdir} -p $RPM_BUILD_ROOT%{_initrddir}
%{__install} -m755 nginx.init $RPM_BUILD_ROOT%{_initrddir}/nginx
%{__install} -m755 nginx-debug.init $RPM_BUILD_ROOT%{_initrddir}/nginx-debug
%endif

# install log rotation stuff
%{__mkdir} -p $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d
%if 0%{?suse_version}
%{__install} -m 644 -p %{SOURCE10} \
    $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/nginx
%else
%{__install} -m 644 -p %{SOURCE1} \
    $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/nginx
%endif

%{__install} -m755 %{bdir}/objs/nginx-debug \
    $RPM_BUILD_ROOT%{_sbindir}/nginx-debug

%{__install} -m644 %{bdir}/objs/ngx_http_xslt_filter_module-debug.so \
    $RPM_BUILD_ROOT%{_libdir}/nginx/modules/ngx_http_xslt_filter_module-debug.so
%{__install} -m644 %{bdir}/objs/ngx_http_image_filter_module-debug.so \
    $RPM_BUILD_ROOT%{_libdir}/nginx/modules/ngx_http_image_filter_module-debug.so
%{__install} -m644 %{bdir}/objs/ngx_http_geoip_module-debug.so \
    $RPM_BUILD_ROOT%{_libdir}/nginx/modules/ngx_http_geoip_module-debug.so
%{__install} -m644 %{bdir}/objs/ngx_http_perl_module-debug.so \
    $RPM_BUILD_ROOT%{_libdir}/nginx/modules/ngx_http_perl_module-debug.so
%{__mkdir} -p $RPM_BUILD_ROOT%{perl_vendorarch}/auto/nginx
%{__install} -m644 %{bdir}/objs/src/http/modules/perl/blib/arch/auto/nginx/nginx-debug.so \
    $RPM_BUILD_ROOT%{perl_vendorarch}/auto/nginx/nginx-debug.so
%{__install} -m644 %{bdir}/objs/ngx_http_js_module-debug.so \
    $RPM_BUILD_ROOT%{_libdir}/nginx/modules/ngx_http_js_module-debug.so
%{__install} -m644 %{bdir}/objs/ngx_stream_js_module-debug.so \
    $RPM_BUILD_ROOT%{_libdir}/nginx/modules/ngx_stream_js_module-debug.so
%{__install} -m644 %{bdir}/objs/ngx_stream_geoip_module-debug.so \
    $RPM_BUILD_ROOT%{_libdir}/nginx/modules/ngx_stream_geoip_module-debug.so

%clean
%{__rm} -rf $RPM_BUILD_ROOT

%files
%defattr(-,root,root)

%{_sbindir}/nginx
%{_sbindir}/nginx-debug

%dir %{_sysconfdir}/nginx
%dir %{_sysconfdir}/nginx/conf.d
%{_sysconfdir}/nginx/modules

%config(noreplace) %{_sysconfdir}/nginx/nginx.conf
%config(noreplace) %{_sysconfdir}/nginx/conf.d/default.conf
%config(noreplace) %{_sysconfdir}/nginx/mime.types
%config(noreplace) %{_sysconfdir}/nginx/fastcgi_params
%config(noreplace) %{_sysconfdir}/nginx/scgi_params
%config(noreplace) %{_sysconfdir}/nginx/uwsgi_params
%config(noreplace) %{_sysconfdir}/nginx/koi-utf
%config(noreplace) %{_sysconfdir}/nginx/koi-win
%config(noreplace) %{_sysconfdir}/nginx/win-utf

%config(noreplace) %{_sysconfdir}/logrotate.d/nginx
%config(noreplace) %{_sysconfdir}/sysconfig/nginx
%config(noreplace) %{_sysconfdir}/sysconfig/nginx-debug
%if %{use_systemd}
%{_unitdir}/nginx.service
%{_unitdir}/nginx-debug.service
%dir %{_libexecdir}/initscripts/legacy-actions/nginx
%{_libexecdir}/initscripts/legacy-actions/nginx/*
%else
%{_initrddir}/nginx
%{_initrddir}/nginx-debug
%endif

%attr(0755,root,root) %dir %{_libdir}/nginx
%attr(0755,root,root) %dir %{_libdir}/nginx/modules
%dir %{_datadir}/nginx
%dir %{_datadir}/nginx/html
%{_datadir}/nginx/html/*

%attr(0755,root,root) %dir %{_localstatedir}/cache/nginx
%attr(0755,root,root) %dir %{_localstatedir}/log/nginx

%dir %{_datadir}/doc/%{name}-%{main_version}
%doc %{_datadir}/doc/%{name}-%{main_version}/COPYRIGHT

%files module-xslt
%attr(0644,root,root) %{_libdir}/nginx/modules/ngx_http_xslt_filter_module.so
%attr(0644,root,root) %{_libdir}/nginx/modules/ngx_http_xslt_filter_module-debug.so

%files module-image-filter
%attr(0644,root,root) %{_libdir}/nginx/modules/ngx_http_image_filter_module.so
%attr(0644,root,root) %{_libdir}/nginx/modules/ngx_http_image_filter_module-debug.so

%files module-geoip
%attr(0644,root,root) %{_libdir}/nginx/modules/ngx_http_geoip_module.so
%attr(0644,root,root) %{_libdir}/nginx/modules/ngx_http_geoip_module-debug.so
%attr(0644,root,root) %{_libdir}/nginx/modules/ngx_stream_geoip_module.so
%attr(0644,root,root) %{_libdir}/nginx/modules/ngx_stream_geoip_module-debug.so

%files module-perl
%attr(0644,root,root) %{_libdir}/nginx/modules/ngx_http_perl_module.so
%attr(0644,root,root) %{_libdir}/nginx/modules/ngx_http_perl_module-debug.so
%dir %{perl_vendorarch}/auto/nginx
%{perl_vendorarch}/nginx.pm
%{perl_vendorarch}/auto/nginx/nginx.so
%{perl_vendorarch}/auto/nginx/nginx-debug.so
%{_mandir}/man3/nginx.3pm*

%files module-njs
%attr(0644,root,root) %{_libdir}/nginx/modules/ngx_http_js_module.so
%attr(0644,root,root) %{_libdir}/nginx/modules/ngx_http_js_module-debug.so
%attr(0644,root,root) %{_libdir}/nginx/modules/ngx_stream_js_module.so
%attr(0644,root,root) %{_libdir}/nginx/modules/ngx_stream_js_module-debug.so

%pre
# Add the "nginx" user
getent group %{nginx_group} >/dev/null || groupadd -r %{nginx_group}
getent passwd %{nginx_user} >/dev/null || \
    useradd -r -g %{nginx_group} -s /sbin/nologin \
    -d %{nginx_home} -c "nginx user"  %{nginx_user}
exit 0

%post
# Register the nginx service
if [ $1 -eq 1 ]; then
%if %{use_systemd}
    /usr/bin/systemctl preset nginx.service >/dev/null 2>&1 ||:
    /usr/bin/systemctl preset nginx-debug.service >/dev/null 2>&1 ||:
%else
    /sbin/chkconfig --add nginx
    /sbin/chkconfig --add nginx-debug
%endif
    # print site info
    cat <<BANNER
----------------------------------------------------------------------

Thanks for using nginx!

Please find the official documentation for nginx here:
* http://nginx.org/en/docs/

Commercial subscriptions for nginx are available on:
* http://nginx.com/products/

----------------------------------------------------------------------
BANNER

    # Touch and set permisions on default log files on installation

    if [ -d %{_localstatedir}/log/nginx ]; then
        if [ ! -e %{_localstatedir}/log/nginx/access.log ]; then
            touch %{_localstatedir}/log/nginx/access.log
            %{__chmod} 640 %{_localstatedir}/log/nginx/access.log
            %{__chown} nginx:%{nginx_loggroup} %{_localstatedir}/log/nginx/access.log
        fi

        if [ ! -e %{_localstatedir}/log/nginx/error.log ]; then
            touch %{_localstatedir}/log/nginx/error.log
            %{__chmod} 640 %{_localstatedir}/log/nginx/error.log
            %{__chown} nginx:%{nginx_loggroup} %{_localstatedir}/log/nginx/error.log
        fi
    fi
fi

%post module-xslt
if [ $1 -eq 1 ]; then
    cat <<BANNER
----------------------------------------------------------------------

The XSLT dynamic module for nginx has been installed.
To enable this module, add the following to /etc/nginx/nginx.conf
and reload nginx:

    load_module modules/ngx_http_xslt_filter_module.so;

Please refer to the module documentation for further details:
http://nginx.org/en/docs/http/ngx_http_xslt_module.html

----------------------------------------------------------------------
BANNER
fi

%post module-geoip
if [ $1 -eq 1 ]; then
    cat <<BANNER
----------------------------------------------------------------------

The GeoIP dynamic modules for nginx have been installed.
To enable those modules, add the following to /etc/nginx/nginx.conf
and reload nginx:

    load_module modules/ngx_http_geoip_module.so;
    load_module modules/ngx_stream_geoip_module.so;

Please refer to the modules documentation for further details:
http://nginx.org/en/docs/http/ngx_http_geoip_module.html
http://nginx.org/en/docs/stream/ngx_stream_geoip_module.html

----------------------------------------------------------------------
BANNER
fi

%post module-image-filter
if [ $1 -eq 1 ]; then
    cat <<BANNER
----------------------------------------------------------------------

The image filter dynamic module for nginx has been installed.
To enable this module, add the following to /etc/nginx/nginx.conf
and reload nginx:

    load_module modules/ngx_http_image_filter_module.so;

Please refer to the module documentation for further details:
http://nginx.org/en/docs/http/ngx_http_image_filter_module.html

----------------------------------------------------------------------
BANNER
fi

%post module-perl
if [ $1 -eq 1 ]; then
    cat <<BANNER
----------------------------------------------------------------------

The perl dynamic module for nginx has been installed.
To enable this module, add the following to /etc/nginx/nginx.conf
and reload nginx:

    load_module modules/ngx_http_perl_module.so;

Please refer to the module documentation for further details:
http://nginx.org/en/docs/http/ngx_http_perl_module.html

----------------------------------------------------------------------
BANNER
fi

%post module-njs
if [ $1 -eq 1 ]; then
    cat <<BANNER
----------------------------------------------------------------------

The nJScript dynamic modules for nginx have been installed.
To enable those modules, add the following to /etc/nginx/nginx.conf
and reload nginx:

    load_module modules/ngx_http_js_module.so;
    load_module modules/ngx_stream_js_module.so;

Please refer to the modules documentation for further details:
https://www.nginx.com/resources/wiki/nginScript/

----------------------------------------------------------------------
BANNER
fi

%preun
if [ $1 -eq 0 ]; then
%if %use_systemd
    /usr/bin/systemctl --no-reload disable nginx.service >/dev/null 2>&1 ||:
    /usr/bin/systemctl stop nginx.service >/dev/null 2>&1 ||:
%else
    /sbin/service nginx stop > /dev/null 2>&1
    /sbin/chkconfig --del nginx
    /sbin/chkconfig --del nginx-debug
%endif
fi

%postun
%if %use_systemd
/usr/bin/systemctl daemon-reload >/dev/null 2>&1 ||:
%endif
if [ $1 -ge 1 ]; then
    /sbin/service nginx status  >/dev/null 2>&1 || exit 0
    /sbin/service nginx upgrade >/dev/null 2>&1 || echo \
        "Binary upgrade failed, please check nginx's error.log"
fi

%changelog
* Tue Jul  5 2016 Konstantin Pavlov <thresh@nginx.com>
- 1.11.2
- njs updated to ef2b708510b1.

* Tue May 31 2016 Konstantin Pavlov <thresh@nginx.com>
- 1.11.1

* Wed May 24 2016 Sergey Budnevitch <sb@nginx.com>
- Fixed logrotate error if nginx is not running
- 1.11.0

* Tue Apr 19 2016 Konstantin Pavlov <thresh@nginx.com>
- 1.9.15
- njs updated to 1c50334fbea6.

* Tue Apr  5 2016 Konstantin Pavlov <thresh@nginx.com>
- 1.9.14

* Tue Mar 29 2016 Konstantin Pavlov <thresh@nginx.com>
- 1.9.13
- Added perl and nJScript dynamic modules
- Fixed Requires section for dynamic modules on CentOS7/RHEL7

* Wed Feb 24 2016 Sergey Budnevitch <sb@nginx.com>
- common configure args are now in macros
- xslt, image-filter and geoip dynamic modules added
- 1.9.12

* Tue Feb  9 2016 Sergey Budnevitch <sb@nginx.com>
- dynamic modules path and symlink in %{_sysconfdir}/nginx added
- 1.9.11

* Tue Jan 26 2016 Konstantin Pavlov <thresh@nginx.com>
- 1.9.10

* Wed Dec  9 2015 Konstantin Pavlov <thresh@nginx.com>
- 1.9.9

* Tue Dec  8 2015 Konstantin Pavlov <thresh@nginx.com>
- 1.9.8
- http_slice module enabled

* Tue Nov 17 2015 Konstantin Pavlov <thresh@nginx.com>
- 1.9.7

* Tue Oct 27 2015 Sergey Budnevitch <sb@nginx.com>
- 1.9.6

* Tue Sep 22 2015 Andrei Belov <defan@nginx.com>
- 1.9.5
- http_spdy module replaced with http_v2 module

* Tue Aug 18 2015 Konstantin Pavlov <thresh@nginx.com>
- 1.9.4

* Tue Jul 14 2015 Sergey Budnevitch <sb@nginx.com>
- 1.9.3

* Tue May 26 2015 Sergey Budnevitch <sb@nginx.com>
- 1.9.1

* Tue Apr 28 2015 Sergey Budnevitch <sb@nginx.com>
- 1.9.0
- thread pool support added
- stream module added
- example_ssl.conf removed

* Tue Apr  7 2015 Sergey Budnevitch <sb@nginx.com>
- 1.7.12

* Tue Mar 24 2015 Sergey Budnevitch <sb@nginx.com>
- 1.7.11

* Tue Feb 10 2015 Sergey Budnevitch <sb@nginx.com>
- 1.7.10

* Tue Dec 23 2014 Sergey Budnevitch <sb@nginx.com>
- 1.7.9

* Tue Dec  2 2014 Sergey Budnevitch <sb@nginx.com>
- 1.7.8

* Tue Sep 30 2014 Sergey Budnevitch <sb@nginx.com>
- 1.7.6

* Tue Sep 16 2014 Sergey Budnevitch <sb@nginx.com>
- epoch added to the EPEL7/CentOS7 spec to override EPEL one
- 1.7.5

* Tue Aug  5 2014 Sergey Budnevitch <sb@nginx.com>
- 1.7.4

* Tue Jul  8 2014 Sergey Budnevitch <sb@nginx.com>
- 1.7.3

* Tue Jun 17 2014 Sergey Budnevitch <sb@nginx.com>
- 1.7.2

* Tue May 27 2014 Sergey Budnevitch <sb@nginx.com>
- 1.7.1
- incorrect sysconfig filename finding in the initscript fixed

* Thu Apr 24 2014 Konstantin Pavlov <thresh@nginx.com>
- 1.7.0

* Tue Apr  8 2014 Sergey Budnevitch <sb@nginx.com>
- 1.5.13
- built spdy module on rhel/centos 6

* Tue Mar 18 2014 Sergey Budnevitch <sb@nginx.com>
- 1.5.12
- spec cleanup
- openssl version dependence added
- upgrade() function in the init script improved
- warning added when binary upgrade returns non-zero exit code

* Tue Mar  4 2014 Sergey Budnevitch <sb@nginx.com>
- 1.5.11

* Tue Feb  4 2014 Sergey Budnevitch <sb@nginx.com>
- 1.5.10

* Wed Jan 22 2014 Sergey Budnevitch <sb@nginx.com>
- 1.5.9

* Tue Dec 17 2013 Sergey Budnevitch <sb@nginx.com>
- 1.5.8
- fixed invalid week days in the changelog

* Tue Nov 19 2013 Sergey Budnevitch <sb@nginx.com>
- 1.5.7

* Tue Oct  1 2013 Sergey Budnevitch <sb@nginx.com>
- 1.5.6

* Tue Sep 17 2013 Andrei Belov <defan@nginx.com>
- 1.5.5

* Tue Aug 27 2013 Sergey Budnevitch <sb@nginx.com>
- 1.5.4
- auth request module added

* Tue Jul 30 2013 Sergey Budnevitch <sb@nginx.com>
- 1.5.3

* Tue Jul  2 2013 Sergey Budnevitch <sb@nginx.com>
- 1.5.2

* Tue Jun  4 2013 Sergey Budnevitch <sb@nginx.com>
- 1.5.1

* Mon May  6 2013 Sergey Budnevitch <sb@nginx.com>
- 1.5.0

* Tue Apr 16 2013 Sergey Budnevitch <sb@nginx.com>
- 1.3.16

* Tue Mar 26 2013 Sergey Budnevitch <sb@nginx.com>
- 1.3.15
- gunzip module added
- set permissions on default log files at installation

* Tue Feb 12 2013 Sergey Budnevitch <sb@nginx.com>
- excess slash removed from --prefix
- 1.2.7

* Tue Dec 11 2012 Sergey Budnevitch <sb@nginx.com>
- 1.2.6

* Tue Nov 13 2012 Sergey Budnevitch <sb@nginx.com>
- 1.2.5

* Tue Sep 25 2012 Sergey Budnevitch <sb@nginx.com>
- 1.2.4

* Tue Aug  7 2012 Sergey Budnevitch <sb@nginx.com>
- 1.2.3
- nginx-debug package now actually contains non stripped binary

* Tue Jul  3 2012 Sergey Budnevitch <sb@nginx.com>
- 1.2.2

* Tue Jun  5 2012 Sergey Budnevitch <sb@nginx.com>
- 1.2.1

* Mon Apr 23 2012 Sergey Budnevitch <sb@nginx.com>
- 1.2.0

* Thu Apr 12 2012 Sergey Budnevitch <sb@nginx.com>
- 1.0.15

* Thu Mar 15 2012 Sergey Budnevitch <sb@nginx.com>
- 1.0.14
- OpenSUSE init script and SuSE specific changes to spec file added

* Mon Mar  5 2012 Sergey Budnevitch <sb@nginx.com>
- 1.0.13

* Mon Feb  6 2012 Sergey Budnevitch <sb@nginx.com>
- 1.0.12
- banner added to install script

* Thu Dec 15 2011 Sergey Budnevitch <sb@nginx.com>
- 1.0.11
- init script enhancements (thanks to Gena Makhomed)
- one second sleep during upgrade replaced with 0.1 sec usleep

* Tue Nov 15 2011 Sergey Budnevitch <sb@nginx.com>
- 1.0.10

* Tue Nov  1 2011 Sergey Budnevitch <sb@nginx.com>
- 1.0.9
- nginx-debug package added

* Tue Oct 11 2011 Sergey Budnevitch <sb@nginx.com>
- spec file cleanup (thanks to Yury V. Zaytsev)
- log dir permitions fixed
- logrotate creates new logfiles with nginx owner
- "upgrade" argument to init-script added (based on fedora one)

* Sat Oct  1 2011 Sergey Budnevitch <sb@nginx.com>
- 1.0.8
- built with mp4 module

* Fri Sep 30 2011 Sergey Budnevitch <sb@nginx.com>
- 1.0.7

* Tue Aug 30 2011 Sergey Budnevitch <sb@nginx.com>
- 1.0.6
- replace "conf.d/*" config include with "conf.d/*.conf" in default nginx.conf

* Wed Aug 10 2011 Sergey Budnevitch
- Initial release